A common mechanism of Sec61 translocon inhibition by small molecules.

The Sec61 complex forms a protein-conducting channel in the endoplasmic reticulum membrane that is required for secretion of soluble proteins and production of many membrane proteins. Several natural and synthetic small molecules specifically inhibit Sec61, generating cellular effects that are useful for therapeutic purposes, but their inhibitory mechanisms remain unclear. Here we present near-atomic-resolution structures of human Sec61 inhibited by a comprehensive panel of structurally distinct small molecules-cotransin, decatransin, apratoxin, ipomoeassin, mycolactone, cyclotriazadisulfonamide and eeyarestatin. All inhibitors bind to a common lipid-exposed pocket formed by the partially open lateral gate and plug domain of Sec61. Mutations conferring resistance to the inhibitors are clustered at this binding pocket. The structures indicate that Sec61 inhibitors stabilize the plug domain in a closed state, thereby preventing the protein-translocation pore from opening. Our study provides the atomic details of Sec61-inhibitor interactions and the structural framework for further pharmacological studies and drug design.

Efficient integration of transmembrane domains depends on the folding properties of the upstream sequences.

The topology of most membrane proteins is defined by the successive integration of α-helical transmembrane domains at the Sec61 translocon. The translocon provides a pore for the transfer of polypeptide segments across the membrane while giving them lateral access to the lipid. For each polypeptide segment of ∼20 residues, the combined hydrophobicities of its constituent amino acids were previously shown to define the extent of membrane integration. Here, we discovered that different sequences preceding a potential transmembrane domain substantially affect its hydrophobicity requirement for integration. Rapidly folding domains, sequences that are intrinsically disordered or very short or capable of binding chaperones with high affinity, allow for efficient transmembrane integration with low-hydrophobicity thresholds for both orientations in the membrane. In contrast, long protein fragments, folding-deficient mutant domains, and artificial sequences not binding chaperones interfered with membrane integration, requiring higher hydrophobicity. We propose that the latter sequences, as they compact on their hydrophobic residues, partially folded but unable to reach a native state, expose hydrophobic surfaces that compete with the translocon for the emerging transmembrane segment, reducing integration efficiency. The results suggest that rapid folding or strong chaperone binding is required for efficient transmembrane integration.

Integration of transmembrane domains is regulated by their downstream sequences.

The Sec61 translocon catalyzes translocation of proteins into the endoplasmic reticulum and the lateral integration of transmembrane segments into the lipid bilayer. Integration is mediated by the hydrophobicity of a polypeptide segment consistent with thermodynamic equilibration between the translocon and the lipid membrane. Integration efficiency of a generic series of increasingly hydrophobic sequences (H-segments) was found to diverge significantly in different reporter constructs as a function of the ∼100 residues that are C-terminal to the H-segments. The hydrophobicity threshold of integration was considerably lowered through insertion of generic ∼20-residue peptides either made of flexible glycine-serine repeats, containing multiple negative charges, or consisting of an oligoproline stretch. A highly flexible, 100-residue glycine-serine stretch maximally enhanced this effect. The apparent free energy of integration was found to be changed by more than 3 kcal/mol with the downstream sequences tested. The C-terminal sequences could also be shown to affect integration of natural mildly hydrophobic sequences. The results suggest that the conformation of the nascent polypeptide in the protected cavity between the ribosome and translocon considerably influences the release of the H-segment into the bilayer.

Decatransin, a new natural product inhibiting protein translocation at the Sec61/SecYEG translocon.

A new cyclic decadepsipeptide was isolated from Chaetosphaeria tulasneorum with potent bioactivity on mammalian and yeast cells. Chemogenomic profiling in S. cerevisiae indicated that the Sec61 translocon complex, the machinery for protein translocation and membrane insertion at the endoplasmic reticulum, is the target. The profiles were similar to those of cyclic heptadepsipeptides of a distinct chemotype (including HUN-7293 and cotransin) that had previously been shown to inhibit cotranslational translocation at the mammalian Sec61 translocon. Unbiased, genome-wide mutagenesis followed by full-genome sequencing in both fungal and mammalian cells identified dominant mutations in Sec61p (yeast) or Sec61α1 (mammals) that conferred resistance. Most, but not all, of these mutations affected inhibition by both chemotypes, despite an absence of structural similarity. Biochemical analysis confirmed inhibition of protein translocation into the endoplasmic reticulum of both co- and post-translationally translocated substrates by both chemotypes, demonstrating a mechanism independent of a translating ribosome. Most interestingly, both chemotypes were found to also inhibit SecYEG, the bacterial Sec61 translocon homolog. We suggest 'decatransin' as the name for this new decadepsipeptide translocation inhibitor.

Functional asymmetry within the Sec61p translocon.

The Sec61 translocon forms a pore to translocate polypeptide sequences across the membrane and offers a lateral gate for membrane integration of hydrophobic (H) segments. A central constriction of six apolar residues has been shown to form a seal, but also to determine the hydrophobicity threshold for membrane integration: Mutation of these residues in yeast Sec61p to glycines, serines, aspartates, or lysines lowered the hydrophobicity required for integration; mutation to alanines increased it. Whereas four leucines distributed in an oligo-alanine H segment were sufficient for 50% integration, we now find four leucines in the N-terminal half of the H segment to produce significantly more integration than in the C-terminal half, suggesting functional asymmetry within the translocon. Scanning a cluster of three leucines through an oligo-alanine H segment showed high integration levels, except around the position matching that of the hydrophobic constriction in the pore where integration was strongly reduced. Both asymmetry and the position effect of H-segment integration disappeared upon mutation of the constriction residues to glycines or serines, demonstrating that hydrophobicity at this position within the translocon is responsible for the phenomenon. Asymmetry was largely retained, however, when constriction residues were replaced by alanines. These results reflect on the integration mechanism of transmembrane domains and show that membrane insertion of H segments strongly depends not only on their intrinsic hydrophobicity but also on the local conditions in the translocon interior. Thus, the contribution of hydrophobic residues in the H segment is not simply additive and displays cooperativeness depending on their relative position.

TRAP assists membrane protein topogenesis at the mammalian ER membrane.

Membrane protein insertion and topogenesis generally occur at the Sec61 translocon in the endoplasmic reticulum membrane. During this process, membrane spanning segments may adopt two distinct orientations with either their N- or C-terminus translocated into the ER lumen. While different topogenic determinants in membrane proteins, such as flanking charges, polypeptide folding, and hydrophobicity, have been identified, it is not well understood how the translocon and/or associated components decode them. Here we present evidence that the translocon-associated protein (TRAP) complex is involved in membrane protein topogenesis in vivo. Small interfering RNA (siRNA)-mediated silencing of the TRAP complex in HeLa cells enhanced the topology effect of mutating the flanking charges of a signal-anchor, but not of increasing signal hydrophobicity. The results suggest a role of the TRAP complex in moderating the 'positive-inside' rule.

Pseudomonas aeruginosa breaches respiratory epithelia through goblet cell invasion in a microtissue model.

Pseudomonas aeruginosa, a leading cause of severe hospital-acquired pneumonia, causes infections with up to 50% mortality rates in mechanically ventilated patients. Despite some knowledge of virulence factors involved, it remains unclear how P. aeruginosa disseminates on mucosal surfaces and invades the tissue barrier. Using infection of human respiratory epithelium organoids, here we observed that P. aeruginosa colonization of apical surfaces is promoted by cyclic di-GMP-dependent asymmetric division. Infection with mutant strains revealed that Type 6 Secretion System activities promote preferential invasion of goblet cells. Type 3 Secretion System activity by intracellular bacteria induced goblet cell death and expulsion, leading to epithelial rupture which increased bacterial translocation and dissemination to the basolateral epithelium. These findings show that under physiological conditions, P. aeruginosa uses coordinated activity of a specific combination of virulence factors and behaviours to invade goblet cells and breach the epithelial barrier from within, revealing mechanistic insight into lung infection dynamics.

Cotranslational Targeting and Posttranslational Translocation can Cooperate in Spc3 Topogenesis.

Secretory and membrane proteins follow either the signal recognition particle (SRP)-dependent cotranslational translocation pathway or the SRP-independent Sec62/Sec63-dependent posttranslational pathway for their translocation across the endoplasmic reticulum (ER). However, increasing evidence suggests that most proteins are cotranslationally targeted to the ER, suggesting mixed mechanisms. It remains unclear how these two pathways cooperate. Previous studies have shown that Spc3, a signal-anchored protein, requires SRP and Sec62 for its biogenesis. This study investigated the targeting and topogenesis of Spc3 and the step at which SRP and Sec62 act using in vivo and in vitro translocation assays and co-immunoprecipitation. Our data suggest that Spc3 reaches its final topology in two steps: it enters the ER lumen head-first and then inverts its orientation. The first step is partially dependent on SRP, although independent of the Sec62/Sec63 complex. The second step is mediated by the Sec62/Sec63 complex. These data suggest that SRP and Sec62 act on a distinct step in the topogenesis of Spc3.

The plug domain of yeast Sec61p is important for efficient protein translocation, but is not essential for cell viability.

The Sec61/SecY translocon mediates translocation of proteins across the membrane and integration of membrane proteins into the lipid bilayer. The structure of the translocon revealed a plug domain blocking the pore on the lumenal side. It was proposed to be important for gating the protein conducting channel and for maintaining the permeability barrier in its unoccupied state. Here, we analyzed in yeast the effect of introducing destabilizing point mutations in the plug domain or of its partial or complete deletion. Unexpectedly, even when the entire plug domain was deleted, cells were viable without growth phenotype. They showed an effect on signal sequence orientation of diagnostic signal-anchor proteins, a minor defect in cotranslational and a significant deficiency in posttranslational translocation. Steady-state levels of the mutant protein were reduced, and when coexpressed with wild-type Sec61p, the mutant lacking the plug competed poorly for complex partners. The results suggest that the plug is unlikely to be important for sealing the translocation pore in yeast but that it plays a role in stabilizing Sec61p during translocon formation.

Membrane Protein Integration and Topogenesis at the ER.

Most membrane proteins are composed of hydrophobic α-helical transmembrane segments and are integrated into the lipid bilayer of the endoplasmic reticulum by the highly conserved Sec61 translocon. With respect to the integration mechanism, three types of transmembrane segments can be distinguished-the signal, the stop-transfer sequence, and the re-integration sequence-which in linear succession can account for all kinds of membrane protein topologies. The transmembrane orientation of the initial signal and to a weaker extent also of downstream transmembrane segments is affected by charged flanking residues according to the so-called positive-inside rule. The main driving force for transmembrane integration is hydrophobicity. Systematic analysis suggested thermodynamic equilibration of each peptide segment in the translocon with the membrane as the underlying mechanism. However, there is evidence that integration is not entirely sequence-autonomous, but depends also on the sequence context, from very closely spaced transmembrane segments to the folding state and properties of neighboring sequences. Topogenesis is even influenced by accessory proteins that appear to act as intramembrane chaperones.

Sec61p contributes to signal sequence orientation according to the positive-inside rule.

Protein targeting to the endoplasmic reticulum is mediated by signal or signal-anchor sequences. They also play an important role in protein topogenesis, because their orientation in the translocon determines whether their N- or C-terminal sequence is translocated. Signal orientation is primarily determined by charged residues flanking the hydrophobic core, whereby the more positive end is predominantly positioned to the cytoplasmic side of the membrane, a phenomenon known as the "positive-inside rule." We tested the role of conserved charged residues of Sec61p, the major component of the translocon in Saccharomyces cerevisiae, in orienting signals according to their flanking charges by site-directed mutagenesis by using diagnostic model proteins. Mutation of R67, R74, or E382 in Sec61p reduced C-terminal translocation of a signal-anchor protein with a positive N-terminal flanking sequence and increased it for signal-anchor proteins with positive C-terminal sequences. These mutations produced a stronger effect on substrates with greater charge difference across the hydrophobic core of the signal. For some of the substrates, a charge mutation in Sec61p had a similar effect as one in the substrate polypeptides. Although these three residues do not account for the entire charge effect in signal orientation, the results show that Sec61p contributes to the positive-inside rule.

A cryptic matrix targeting signal of the yeast ADP/ATP carrier normally inserted by the TIM22 complex is recognized by the TIM23 machinery.

The yeast ADP/ATP carrier (AAC) is a mitochondrial protein that is targeted to the inner membrane via the TIM10 and TIM22 translocase complexes. AAC is devoid of a typical mitochondrial targeting signal and its targeting and insertion are thought to be guided by internal amino acid sequences. Here we show that AAC contains a cryptic matrix targeting signal that can target up to two thirds of the N-terminal part of the protein to the matrix. This event is coordinated by the TIM23 translocase and displays all the features of the matrix-targeting pathway. However, in the context of the whole protein, this signal is 'masked' and rendered non-functional as the polypeptide is targeted to the inner membrane via the TIM10 and TIM22 translocases. Our data suggest that after crossing the outer membrane the whole polypeptide chain of AAC is necessary to commit the precursor to the TIM22-mediated inner membrane insertion pathway.

Orientation of internal signal-anchor sequences at the Sec61 translocon.

Translocation and insertion of secretory and membrane proteins at the endoplasmic reticulum are mediated by the Sec61 translocon. Evidence from in vivo as well as in vitro experiments indicates that N-terminal signal-anchor sequences initially insert N-first before they invert their orientation to translocate the C-terminus. Inversion is driven by flanking charges according to the positive-inside rule and inhibited by increased signal hydrophobicity. Here, we show that upon extending the N-terminal hydrophilic domain preceding the signal core to more than ~20 residues, the insertion behavior changes. Apparent signal inversion and the effect of hydrophobicity are largely lost, suggesting that N-first insertion is limited to N-terminal signal anchors. Extended N-domains sterically hinder N-translocation in a length-dependent manner also for reverse signal anchors with inverted flanking charges. The results indicate a mechanistic difference in the insertion process of N-terminal and internal signal sequences.

The hydrophobic core of the Sec61 translocon defines the hydrophobicity threshold for membrane integration.

The Sec61 translocon mediates the translocation of proteins across the endoplasmic reticulum membrane and the lateral integration of transmembrane segments into the lipid bilayer. The structure of the idle translocon is closed by a lumenal plug domain and a hydrophobic constriction ring. To test the function of the apolar constriction, we have mutated all six ring residues of yeast Sec61p to more hydrophilic, bulky, or even charged amino acids (alanines, glycines, serines, tryptophans, lysines, or aspartates). The translocon was found to be surprisingly tolerant even to the charge mutations in the constriction ring, because growth and translocation efficiency were not drastically affected. Most interestingly, ring mutants were found to affect the integration of hydrophobic sequences into the lipid bilayer, indicating that the translocon does not simply catalyze the partitioning of potential transmembrane segments between an aqueous environment and the lipid bilayer but that it also plays an active role in setting the hydrophobicity threshold for membrane integration.

Mutations in the Sec61p channel affecting signal sequence recognition and membrane protein topology.

The orientation of most single-spanning membrane proteins obeys the "positive-inside rule", i.e. the flanking region of the transmembrane segment that is more positively charged remains in the cytosol. These membrane proteins are integrated by the Sec61/SecY translocon, but how their orientation is achieved is unknown. We have screened for mutations in yeast Sec61p that alter the orientation of single-spanning membrane proteins. We identified a class of mutants that are less efficient in retaining the positively charged flanking region in the cytosol. Surprisingly, these mutations are located at many different sites in the Sec61/SecY molecule, and they do not only involve charged amino acid residues. All these mutants have a prl phenotype that so far have only been seen in bacteria; they allow proteins with defective signal sequences to be translocated, likely because the Sec61p channel opens more easily. A similar correlation between topology defects and prl phenotype was also seen with previously identified yeast Sec61 mutants. Our results suggest a model in which the regulated opening of the translocon is required for the faithful orientation of membrane proteins.

Topogenesis of membrane proteins at the endoplasmic reticulum.

Most eukaryotic membrane proteins are cotranslationally integrated into the endoplasmic reticulum membrane by the Sec61 translocation complex. They are targeted to the translocon by hydrophobic signal sequences, which induce the translocation of either their N- or their C-terminal sequence. Signal sequence orientation is largely determined by charged residues flanking the apolar sequence (the positive-inside rule), folding properties of the N-terminal segment, and the hydrophobicity of the signal. Recent in vivo experiments suggest that N-terminal signals initially insert into the translocon head-on to yield a translocated N-terminus. Driven by a local electrical potential, the signal may invert its orientation and translocate the C-terminal sequence. Increased hydrophobicity slows down inversion by stabilizing the initial bound state. In vitro cross-linking studies indicate that signals rapidly contact lipids upon entering the translocon. Together with the recent crystal structure of the homologous SecYEbeta translocation complex of Methanococcus jannaschii, which did not reveal an obvious hydrophobic binding site for signals within the pore, a model emerges in which the translocon allows the lateral partitioning of hydrophobic segments between the aqueous pore and the lipid membrane. Signals may return into the pore for reorientation until translation is terminated. Subsequent transmembrane segments in multispanning proteins behave similarly and contribute to the overall topology of the protein.