Femur can be lengthened over nail, along its mechanical axis : a modified lengthening over nail technique.

The theoretical risk of medialisation of the knee joint and the lateral shift of the lower extremity mechanical axis, due to achievement of lengthening along the anatomical axis is present in the process of lengthening with elongation nails and the "lengthening over nail" technique. With this new technique described in this study we aimed to prove that lengthening over nail can be performed along the mechanical axis of the femur. Six lower-limb models were used to perform three different lengthening techniques. In group 1, lengthening was achieved along the anatomical axis with an external fixator. In group 2, the clamps of the external fixator were adjusted at 6° to achieve lengthening along the mechanical axis. In group 3, eight different sized nails were applied with an external fixator (angle adjustable clamps were at 6°) to achieve lengthening along the mechanical axis by LON technique. Photographs were taken after each cm of lengthening and the distance from the mechanical axis line were measured. The modified LON technique described in this study provided lengthening along the mechanical axis. One of the main advantages of the procedure described in our study is the chance for reconsideration and revision of unforeseen angulations and malalignments, via the help of the distal angular adjustable clamps; during the time of the surgery for external fixator removal before application of the poller screws.

Biomechanical Performance of Hip Labral Repair Techniques.

PURPOSE: To determine the strength of various suture techniques and the impact of suture passer size on cyclically loaded hip labra. METHODS: We assigned 63 bovine hip labra to 9 simple knotless suture technique groups using OrthoCord suture: (1) penetrating grasper (2.6 mm)-placed horizontal mattress, (2) penetrating grasper-placed vertical mattress, (3) SutureLasso (1.8 mm)-placed vertical mattress, (4) penetrating grasper-placed oblique repair, (5) penetrating grasper-placed vertical mattress plus radiofrequency, (6) SutureLasso-placed horizontal mattress, (7) SutureLasso-placed oblique mattress, (8) SutureLasso-placed horizontal mattress plus radiofrequency, and (9) SutureLasso-placed oblique mattress plus radiofrequency. After 20 cycles of uniaxial tensile loading (5 to 80 N), destructive testing was performed. RESULTS: Penetrating grasper-placed horizontal mattress sutures showed lower ultimate failure loads than vertical and oblique mattress sutures (P < .05). Penetrating grasper-placed vertical mattress sutures had higher peak-to-peak displacement than SutureLasso-placed vertical mattress sutures (P = .04). SutureLasso-placed oblique mattress sutures had a higher ultimate load (P < .01) and stiffness (P = .04) than SutureLasso-placed horizontal mattress sutures. SutureLasso-placed horizontal mattress sutures had lower cyclic elongation than penetrating grasper-placed horizontal mattress sutures (P = .01) and lower ultimate load (P < .01) and stiffness than SutureLasso-placed vertical mattress sutures (P < .01). Horizontal mattress sutures with radiofrequency had a higher ultimate load (P = .02), stiffness, and cyclic elongation (P < .01) than without radiofrequency. CONCLUSIONS: A horizontal mattress hip labrum stitch shows a lower ultimate failure load than vertical or oblique mattress stitches. Smaller-diameter suture-passing devices show less cyclic displacement and elongation than larger-diameter devices. Radiofrequency labral treatment does not alter vertical stitch strength but does alter horizontal mattress stitch strength. CLINICAL RELEVANCE: Vertical and oblique stitches are stronger than horizontal stitches. A 1.8-mm passing device shows a better cyclic loading performance than a 2.6-mm device.

Operative treatment of chondroblastoma: a study of 11 cases.

Aim of the study was to review the radiological, clinical results of 11 chondroblastoma cases treated at our institute between 2003-2013. All patients with chondroblastoma included in this study underwent intra-lesional curettage+/-bone grafting. Follow up for healing of chondroblastoma lesions and detection of any local recurrence was assessed on clinical and radiological bases. The functional outcome was assessed by the Musculoskeletal Tumour Society scoring system. The mean follow-up period was 6.1 years. There were three recurrences (two femoral head, one proximal tibia). The mean Musculoskeletal Tumour Society functional score was 21. First line aggressive treatment seems appropriate for chondroblastoma especially when localized at lower extremities.

Mechanical Comparison of Headless Screw Fixation and Locking Plate Fixation for Talar Neck Fractures.

For talar neck fractures, open reduction and internal fixation have been thought to facilitate revascularization and prevent osteonecrosis. Newer screw systems allow for placement of cannulated headless screws, which provide compression by virtue of a variable pitch thread. The present study compared the biomechanical fixation strength of cannulated headless variable-pitch screw fixation and locking plate fixation. A reproducible talar neck fracture was created in 14 fresh cadaver talar necks. Talar head fixation was then performed using 2 cannulated headless variable-pitch 4-mm/5-mm diameter (4/5) screws (Acutrak; Acumed, Hillsboro, OR) and locking plate fixation. Headless variable-pitch screw fixation had lower failure displacement than did locking plate fixation. No statistically significant differences were found in failure stiffness, yield stiffness (p = .655), yield load (p = .142), or ultimate load between the 2 fixation techniques. Cannulated headless variable-pitch screw fixation resulted in better failure displacement than locking plate fixation in a cadaveric talus model and could be considered a viable option for talus fracture fixation. Headless, fully threaded, variable-pitch screw fixation has inherent advantages compared with locking plate fixation, because it might cause less damage to the articular surface and can compress the fracture for improved reduction. Additionally, plate fixation can increase the risk of avascular necrosis owing to the wider incision and dissection of soft tissues.

A new compression design that increases proximal locking screw bending resistance in femur compression nails.

The aim is to present our new method of compression, a compression tube instead of conventional compression screw and to investigate the difference of proximal locking screw bending resistance between compression screw application (6 mm wide contact) and compression tube (two contact points with 13 mm gap) application. We formed six groups each consisting of 10 proximal locking screws. On metal cylinder representing lesser trochanter level, we performed 3-point bending tests with compression screw and with compression tube. We determined the yield points of the screws in 3-point bending tests using an axial compression testing machine. We determined the yield point of 5 mm screws as 1963±53 N (mean±SD) with compression screw, and as 2929±140 N with compression tubes. We found 51% more locking screw bending resistance with compression tube than with compression screw (p=0,000). Therefore compression tubes instead of compression screw must be preferred at femur compression nails.

The effects of blood transfusion on renal functions in orthopaedic surgery.

OBJECTIVE: The effects of perioperative blood transfusion on renal functions have been studied in various studies. In this study, we investigated the effects of blood transfusion on postoperative kidney functions in patients who underwent orthopaedic surgeries. METHOD: Total 136 patients who were operated for several orthopedic pathologies between June 2013 and December 2014 were evaluated. The patients were divided into two groups according to the amounts of blood transfusion. Ninety five patients (69.8%) who were transfused less than 3 units were included in Group 1 and 41 patients (30.2%) who received 3 and more units of blood were included in Group 2. RESULTS: There were no statistical difference between the two groups in terms of preoperative gender, hypertension, diabetes mellitus, chronical renal failure and smoking habbits (P > 0.05). No statistical differences between the groups were seen in terms of postoperative hospital stay, pulmonary and other complications as well as mortality (P > 0.05). When the two groups were compared for blood parameters showing postoperative renal and other system functions, no statistical differences were detected (P > 0.05). CONCLUSION: Blood transfusion does not have negative effects on postoperative BUN and creatinine levels in patients operated for orthopaedic pathologies.

The Impact of Complex Loadings on the Structure of the L2-L3 Intervertebral Disc in a Sheep Spine Cadaver Model: A Biomechanical and Histological Evaluation.

Background The human vertebral column generates movements under versatile, dynamic loads. Understanding how the spine reacts to these movements and loads is crucial for developing new spine implants and surgical treatments for intervertebral disc injuries. Mechanically uni-axial compression models have been extensively studied. However, the spine's daily loading is not limited to compression, so it is crucial to measure its behavior in all movements (flexion-extension, rotation, and axial compression). Methods This study utilized L1-L5 segments from 19 healthy adult sheep spines. The L2-L3 disc of the first spine underwent only histological evaluation without biomechanical testing to define basic histological parameters. The remaining 18 were divided into three groups of six and subjected to biomechanical tests. Different mechanisms for three groups of spinal segments were prepared, and tests were performed on Shimadzu AG-IS 10 KN (Universal Drawing Press, Kyoto, Japan). An axial load (800 N) was applied to the first group, an axial load with 15 degrees of flexion to the second group, and an axial load with 10 degrees of rotation plus 15 degrees of flexion to the third group. A biomechanical evaluation of the maximum elongation amounts (MEAs) was performed and compared between the groups. Then, the L2-L3 discs were removed from the sheep spines, and a histological examination of the discs was conducted using Hematoxylin-Eosin (HE), Alcian Blue (AB), and Masson's Trichrome (MT) staining. Results The mean MEA ± Standard Deviation (Range) was 1.39 ± 0.38 (0.91-1.94) for Group 1, 2.02 ± 0.75 (0.91-3.01) for Group 2, and 2.47 ± 1.09 (0.64-3.9) for Group 3. Biomechanically, although MEAs increased from Group 1 to Group 3 (meaning that the mean MEAs increased as the number of types of applied force increased), there was no statistically significant difference between the groups regarding the MEAs (P = 0.092). Histologically, no significant differences were observed between all groups after HE staining. In all groups, hypercellularity, edema in the connective tissue, separation between tissue layers, delamination, and signs of swelling and necrosis in the cells were observed similarly. For the AB staining, there was a decrease in the glycosaminoglycan (GAG) structure in the tissue samples compared to the control tissue, but no significant differences were observed between the groups. However, it was observed that the stratification in Group 3 was slightly more deteriorated than in the other groups. For the MT staining, collagen structure deterioration was observed in all groups. It was observed that the amount of collagen was significantly reduced compared to the control tissue. Conclusion As a result, when the axial load is applied biomechanically, there is more displacement of the vertebral discs in Group 3 with multidimensional movements. Furthermore, histological studies revealed deterioration between tissue layers when exposed to complex movements, and the degradation of stratification in group 3 compared to other loading combinations in groups 2 and 3 may indicate the role of complex loads in the formation of disc herniation.

Clinical predictors of Alzheimer's disease-like brain atrophy in individuals with memory complaints.

OBJECTIVES: The definition and assessment methods for subjective cognitive decline (SCD) vary among studies. We aimed to investigate which features or assessment methods of SCD best predict Alzheimer's disease (AD)-related structural atrophy patterns. METHODS: We assessed 104 individuals aged 55+ with memory complaints but normal cognitive screening. Our research questions were as follows: To improve the prediction of AD related morphological changes, (1) Would the use of a standardized cognitive screening scale be beneficial? (2) Is conducting a thorough neuropsychological evaluation necessary instead of relying solely on cognitive screening tests? (3) Should we apply SCD-plus research criteria, and if so, which criterion would be the most effective? (4) Is it necessary to consider medical and psychiatric comorbidities, vitamin deficiencies, vascular burden on MRI, and family history? We utilized Freesurfer to analyze cortical thickness and regional brain volume meta-scores linked to AD or predicting its development. We employed multiple linear regression models for each variable, with morphology as the dependent variable. RESULTS: AD-like morphology was associated with subjective complaints in males, individuals with advanced age, and higher education. Later age of onset for complaints, complaints specifically related to memory, excessive deep white matter vascular lesions, and using medications that have negative implications for cognitive health (according to the Beers criteria) were predictive of AD-related morphology. The subjective cognitive memory questionnaire scores were found to be a better predictor of reduced volumes than a single-question assessment. It is important to note that not all SCD-plus criteria were evaluated in this study, particularly the APOE genotype, amyloid, and tau status, due to resource limitations. CONCLUSIONS: The detection of AD-related structural changes is impacted by demographics and assessment methods. Standardizing SCD assessment methods can enhance predictive accuracy.

The evaluation of a de novo biplanar distal humerus plate: A biomechanical study.

OBJECTIVES: The aim of this study was to compare the stability of a novel biplanar distal humerus plate with the single- and double-columns J-plating techniques. MATERIALS AND METHODS: Eighteen sawbones humera were divided into three groups. In Groups 1, 2 and 3, biplanar plate, single lateral J-plate and double J-plate, were used, respectively. Transverse osteotomies at the upper portion of the olecranon fossa were made. Blocks of 10-mm was removed from each sample. Axial, torsional, and extensional stiffness of each group were measured. RESULTS: The mean axial stiffness values in Groups 1, 2, and 3 were 64.80±6.75, 33.70±5.71, and 171.48±9.53 N/mm, respectively. Group 1 demonstrated a statistically significant difference compared to Group 2 (p=0.032), whereas Group 3 showed a statistically significant difference compared to Groups 1 and 2 (p=0.025 and p=0.014, respectively). The mean torsional stiffness values of Groups 1, 2, and 3 were 0.23±0.01, 0.14±0.008, and 0.30±0.007 N/ degree, respectively. Groups 1 and 3 demonstrated a statistically significant difference compared to Group 2 (p=0.042 and p=0.028, respectively). No statistically significant difference was detected between Groups 1 and 3 (p=0.27). The mean extensional bending stiffness values of Groups 1, 2 and 3 were 2.64±0.31, 1.17±0.13, and 3.2±0.1 N/mm, respectively. Group 1 demonstrated a statistically significant difference compared to Group 2 (p=0.041). There was no statistically significant difference between Groups 1 and 3 (p=0.083). CONCLUSION: Biplanar plate allows applying enough numbers of long sagittal screws and offers more biomechanical stability than lateral column J-plate and in some aspects strong as dual J-plating in torsional and bending tests.

Reliability and Validity of the Snaith-Hamilton Pleasure Scale Clinician Administered Turkish Form. / Klinisyen Tarafindan Uygulanan Snaith-Hamilton Zevk Alma Ölçegi Türkçe Uyarlamasinin Geçerlik ve Güvenilirlik Çalismasi.

OBJECTIVE: Anhedonia, which is defined as diminished capacity of having pleasure, is a common symptom in many mental disorders. It has been aimed in this study to adapt to the Turkish language the Snaith- Hamilton Pleasure Scale Clinician Administered Form (SHAPS-C) and examining reliability and validity of Snaith-Hamilton Pleasure Scale Clinician Administered Turkish Form (SHAPS-C-TR) which measures anhedonia in clinical and healthy samples. METHOD: Two groups consisting of 63 participants consulting the psychiatry clinic and 67 non-clinical participants were included in the study. Data were collected with the Turkish version of the SHAPS-C (the SHAPS-C-TR), the Beck Depression Inventory (BDI), the Montgomery-Asberg Depression Rating Scale (MADRS) and the Positive Negative Affect Scale (PANAS). RESULTS: The Kuder-Richardson internal consistency coefficient for the entire participants, the clinical and the non-clinical group were, 0.765, 0.813 and 0.657 respectively. The intra-class coefficient for test-retest reliability was 0.732. The total score on the SHAPS-C-TR significantly correlated with the scores on the anhedonia items of the BDI and the MADRS but not the scores on anxiety items. The PANAS positive symptoms scores were negatively correlated with the SHAPSC- TR total score. In the clinical group, the participants followed up with depression had significantly higher SHAPS-C-TR score than the rest of the participants. A similar difference was not demonstrated by the scores of the clinical group participants followed up with anxiety disorder. Scores on the SHAPS-C-TR did not vary with respect to the demographic characteristics of the participants. CONCLUSION: The SHAPS-C-TR is a valid and reliable measurement tool to assess anhedonia in both clinical and non-clinical individuals irrespective of differences in demographic features.

Valproate, obesity and other causes of clozapine poor metabolism in the context of rapid titration may explain clozapine-induced myocarditis: A re-analysis of a Turkish case series.

INTRODUCTION: Clozapine-induced myocarditis or any clozapine-induced inflammation may be a hypersensitivity reaction due to titration that was too rapid for the patient's clozapine metabolism. Clozapine metabolism is influenced by ancestry, sex, smoking and the presence of confounders including obesity, infections, and inhibitors (e.g., valproate) causing the patient to behave as a clozapine poor metabolizer (PM). A published study in a Turkish hospital identified 1 case of clozapine-induced pancreatitis and hepatitis and 9 cases of clozapine-induced myocarditis. To explore the hypothesis that the 10 patients were clozapine PMs, their serum clozapine concentrations were investigated using concentration-to-dose (C/D) ratios and their titrations carefully reviewed. METHODS: Dividing the trough serum concentration by the dose produces the clozapine C/D ratio. The dose required to reach 350ng/ml was considered the minimum therapeutic dosage and was used to classify patients according to clozapine PM status. Titration speed was assessed. RESULTS: All 10 patients were possibly clozapine PMs (3 of them had as minimum therapeutic doses: 72, 82 or 83mg/day). Nine of the 10 patients may have behaved as clozapine PMs due to obesity and/or valproate co-prescription during titration. One also had an undiagnosed infection. Of the 10 patients, 9 had at least 1 of 3 factors: too-rapid titration in the first or second weeks, or a final dosage that was too high. CONCLUSIONS: Future studies using clozapine levels and considering the role of clozapine PM status should explore whether or not all cases of clozapine-induced inflammation could be explained by lack of individualized titration.

What is the Effect of Pedicle Screw Reinsertion Through the Same Trajectory on Pullout Strength?

AIM: To investigate the pullout strength of a pedicle screw reinserted through the same trajectory MATERIAL and METHODS: Fifty freshly frozen lamb L4 vertebrae were divided into the following five groups: Group 1, inserted with a 5-mm pedicle screw; Group 2, inserted with a 5-mm pedicle screw followed by the removal and reinsertion of the same screw after control; Group 3, inserted with a 5-mm pedicle screw followed by the removal and reinsertion of a 5.5-mm screw after control; Group 4, inserted with a 5.5-mm pedicle screw; and Group 5, inserted with a 5.5-mm pedicle screw followed by the removal and reinsertion of the same screw after control. Pedicle screws were inserted into the right pedicles, and axial pullout testing was performed at 5 mm/min. All data were recorded. A load-displacement curve was used to obtain the peak value of the pullout strength for all specimens. RESULTS: The mean pullout strengths were 1086.22 N, 1043.32 N, 1039.18, 1199.10, and 1131.68 N for Groups 1?5, respectively. No significant difference was observed among all groups (p > 0.05). CONCLUSION: Perioperative reinsertion of the same screw or (0.5 mm) larger in diameter through the same trajectory after the control of the screw trajectory did not affect the pullout strength of the screw.

Biomechanical comparison of pullout strengths of six pedicle screws with different thread designs.

OBJECTIVES: This study aims to assess the pullout strength of six different pedicle screw thread patterns. MATERIALS AND METHODS: A total of 36 sheep spines were divided into six groups including six spines in each group: fully threaded cortical (Type A), fully threaded spongeous (Type B), fully cortical threads in the proximal half and fully spongeous threads in the distal half (Type C), fully spongeous threads in the proximal half and fully cortical threads in the distal half (Type D), unthreaded proximal half with fully spongeous threads in the distal half (Type E), and unthreaded proximal half with fully cortical threads in the distal half (Type F). The axial compression-traction machine was used for biomechanical testing at a pullout rate of 1 mm/min. RESULTS: The mean values of pullout strength of the groups A, B, C, D, E, and F were 1112±7.52 N, 986±8.34 N, 646±3.88 N, 676±7.16 N, 609±9.52 N, and 769±6.49 N, respectively. There was a statistically significant difference between the screw groups A and B, C, D, E and F (p=0.036, p=0.028, p=0.04, p=0.039, and p=0.046, respectively). A statistically significant difference was observed between the groups B versus C and E (p=0.037 and p=0.021, respectively). There was no statistically significant difference between the groups B versus D and F (p=0.35 and p=0.61, respectively). CONCLUSION: Fully threaded cortical pedicular screw design exhibited the strongest bone grasp compared to other thread designs. Further studies should be conducted in multidirectional force pattern on human spine to assess the six screw thread designs in a closer real-life setting simulation model.

The Validity and Reliability of the Turkish Version of MacArthur Competence Assessment Tool for Treatment Decision: Correlates of Competence in Schizophrenia Patients.

INTRODUCTION: Informed consent is an indispensable condition of the clinical practice for the provision of health care. The main objective of this study is to translate the MacArthur competence assessment tool for treatment (MacCAT-T) into Turkish and evaluate the validity and reliability of the Turkish version in schizophrenia patients and healthy control subjects. METHODS: In this cross-sectional study, 30 hospitalized schizophrenia patients and 25 healthy subjects were assessed with MacCAT-T, Mental Competence Evaluation Form for Assessment of Competency (MCEF), Positive and Negative Syndrome Scale, Beck Depression Inventory, Mini Mental State Examination, Wechsler Adult Intelligence Scale (WAIS) - Similarities subtest and the Schedule for Assessing the Three Components of Insight. Psychometric properties of MacCAT-T were examined by intra-class correlation coefficients and Cronbach's alpha values. RESULTS: Intra-class correlations ranged between 0.83 and 0.99 for four subscales of the tool. Cronbach alpha value of MacCAT-T was found 0.89. Severity of psychopathology and indices of insight were found to be negatively correlated with the subscales of the tool. WAIS-Similarities subtest scores were found to be positively correlated with understanding and reasoning subscales of MacCAT-T. CONCLUSION: The Turkish version of MacCAT-T is a valid and reliable instrument for Turkish patients. The severity of psychopathology, insight and executive functions were shown to be significantly related to the decision making capacity in patients with schizophrenia.

Bioactive snail mucus-slime extract loaded chitosan scaffolds for hard tissue regeneration: the effect of mucoadhesive and antibacterial extracts on physical characteristics and bioactivity of chitosan matrix.

Biobased extracts comprise various bioactive components and they are widely used in tissue engineering applications to increase bioactivity as well as physical characteristics of biomaterials. Among animal sources, garden snailHelix aspersahas come into prominence with its antibacterial and regenerative extracts and show potential in tissue regeneration. Thus, in this study, bioactiveH. aspersaextracts (slime, mucus) were loaded in chitosan (CHI) matrix to fabricate porous scaffolds for hard tissue regeneration. Physical, chemical properties, antimicrobial activity was determined as well asin vitrobioactivity for bone and cartilage regeneration. Mucus and slime incorporation enhanced mechanical properties and biodegradation rate of CHI matrix. Scanning electron microscopy images showed that the average pore size of the scaffolds decreased with higher extract content. Mucus and slime extracts showed antimicrobial effect on two bacterial strains.In vitrocytotoxicity, osteogenic and chondrogenic activity of the scaffolds were evaluated with Saos-2 and SW1353 cell lines in terms of Alkaline phosphatase activity, biomineralization, GAG, COMP and hydroxyproline content. Cell viability results showed that extracts had a proliferative effect on Saos-2 and SW1353 cells when compared to the control group. Mucus and slime extract loading increased osteogenic and chondrogenic activity. Thus, the bioactive extract loaded CHI scaffolds showed potential for bone and cartilage regeneration with enhanced physical properties andin vitrobioactivity.

A comparative study of detection of myocarditis induced by clozapine: With and without cardiac monitoring.

The aim of this study was to investigate and compare the incidence of suspected or definite cases of clozapine induced myocarditis (SDM) and clinical factors which could influence its onset in two different time periods, defined by pre- and post-cardiac monitoring at an inpatient setting, during the initiation phase of clozapine treatment. Hospital records of patients started on clozapine in the inpatient unit between 2011 and 2018 were investigated. Eight in 38 patients (11.3%) were classified as SDM after the initiation of the monitoring protocol, whereas only 1 in 33 patients (1.4%) was classified as SDM, before. Monitored and non-monitored patient groups were similar with regard to demographic and clinical variables. Diagnosis of schizoaffective disorder and use of concominant lithium, valproic acid and atypical antipsychotics were higher in patients with SDM, while clozapine dose titration was similar compared to the rest of the patients. Cardiac monitoring seems to be the main factor leading to the increase in the detection of clozapine induced myocarditis (CIM). If not monitored, the outcome of CIM can be fatal without any warning signs and symptoms. Concominant use of mood stabilizers including valproic acid and lithium, are important risk factors for the development of CIM.

Straight-Forward versus Bicortical Fixation Penetrating Endplate in Lumbosacral Fixation-A Biomechanical Study.

OBJECTIVE: Many lumbosacral fixation techniques have been described to offer a more screw-bone purchase. The forward anatomical fixation parallel to the endplate is still the most preferred method. Literature revealed little knowledge regarding the mechanical stability of lumbosacral trans-endplate fixation compared to the traditional trans-pedicular screw fixation method. The aim of this study is to assess the pull-out strength of lumbosacral screws penetrating the end plate and comparing it to the conventional trans-pedicular screw insertion method. METHODS: Eight lumbar and eight sacral vertebrae, with average age 69.4 years, Left pedicles of the 5th lumbar vertebrae were used for trans-endplate screw fixation, group 1A, right pedicles were used for anatomical trans-pedicular screw fixation, group 1B. In the sacral vertebrae, the right side S1 pedicles were used for trans-endplate fixation, group 2A, left side pedicles were used for anatomical trans-pedicular screw fixation, group 2B. The biomechanical tests were performed using the axial compression testing machine. All tests were applied using 2 mm/min traction speed. RESULTS: The average pull-out strength values of groups 1A and 1B were 403.78±11.71 N and 306.26±17.55 N, respectively. A statistical significance was detected with p=0.012. The average pull-out strength values of groups 2A and 2B were 388.73±17.03 N and 299.84±17.52 N, respectively. A statistical significance was detected with p=0.012. CONCLUSION: The trans-endplate lumbosacral fixation method is a trustable fixation method with a stronger screw-bone purchase and offer a good alternative for surgeons specially in patients with osteoporosis.

The effectiveness of extracorporeal shock wave therapy in snapping scapula.

BACKGROUND: Bursitis of the snapping scapula is commonly a misdiagnosed problem. Extracorporeal shockwave therapy (ESWT) has been used successfully in the treatment of many chronic inflammatory conditions. The aim of this study was to assess and compare the effectiveness of ESWT in the treatment of scapulothoracic bursitis with the outcome of corticosteroid injection. METHODS: Using the randomized controlled trials 43 patients with scapulothoracic bursitis were divided into two groups. Group 1 ( n = 22) received three sessions of ESWT. Group 2 ( n = 21) received a single local injection of 80 mg of methylprednisolone. Visual analogue scale (VAS) scores were recorded at each follow-up, whereas the level of satisfaction was evaluated using the Roles and Maudsley criteria. RESULTS: In group 1, the average VAS scores after 1, 2, 3, and 6 months were 39, 30, 27, and 16, respectively, whereas, in group 2, the average VAS scores were 46, 44, 35, and 36, respectively. There was no statistical significance between the two groups in the first and second months. However, after 3 and 6 months, group 1 revealed lower average VAS scores compared to that of the second group with p-values (0.012 and 0.001), respectively. Roles and Maudsley criteria showed that first group patients were 46% excellent, 36% good, 14% acceptable, and 4% had poor results. However, second group patients were 24% excellent, 33% good, 19% acceptable, and 24% had poor results. CONCLUSION: We believe that ESWT is a beneficial and trustable method of treatment and can be strongly recommended in painful cases of scapulothoracic bursitis.

A novel anatomical patellar plate for transverse patellar fracture - A biomechanical in-vitro study.

OBJECTIVE: The aim of this study was to assess the safety and stability of our novel anatomical patella plate and to compare its stability with tension band-wire technique. METHODS: A total of 12 cadaveric preserved knees (six right and six left patellae) with close patellar size were chosen to form two groups of six samples. Each group received either plate or tension band-wiring fixation for an experimentally created patella fracture. Cyclic load of an average of 350 N was applied for all specimens and after accomplishing 50 cycles the displacements of all fracture edges were recorded. RESULTS: After completing 50 cycles in each group, the average fracture edges displacement measured in the plate group was 1.98 ± 0.299 mm, whereas the average fracture edges displacement measured in the tension band-wire group was 2.85 ± 0.768 mm (p = 0.016). CONCLUSION: In the operative treatment of displaced transverse patellar fractures, the strength of fixation obtained by titanium curved plates is highly stronger when compared to the fixation with a tension band-wire technique. Fixation with titanium curved plates provides satisfactory stability at the fracture site which allow withstanding the cyclic loads during the postoperative rehabilitation.