RESUMO
Coherent ranging, also known as frequency-modulated continuous-wave (FMCW) laser-based light detection and ranging (lidar)1 is used for long-range three-dimensional distance and velocimetry in autonomous driving2,3. FMCW lidar maps distance to frequency4,5 using frequency-chirped waveforms and simultaneously measures the Doppler shift of the reflected laser light, similar to sonar or radar6,7 and coherent detection prevents interference from sunlight and other lidar systems. However, coherent ranging has a lower acquisition speed and requires precisely chirped8 and highly coherent5 laser sources, hindering widespread use of the lidar system and impeding parallelization, compared to modern time-of-flight ranging systems that use arrays of individual lasers. Here we demonstrate a massively parallel coherent lidar scheme using an ultra-low-loss photonic chip-based soliton microcomb9. By fast chirping of the pump laser in the soliton existence range10 of a microcomb with amplitudes of up to several gigahertz and a sweep rate of up to ten megahertz, a rapid frequency change occurs in the underlying carrier waveform of the soliton pulse stream, but the pulse-to-pulse repetition rate of the soliton pulse stream is retained. As a result, the chirp from a single narrow-linewidth pump laser is transferred to all spectral comb teeth of the soliton at once, thus enabling parallelism in the FMCW lidar. Using this approach we generate 30 distinct channels, demonstrating both parallel distance and velocity measurements at an equivalent rate of three megapixels per second, with the potential to improve sampling rates beyond 150 megapixels per second and to increase the image refresh rate of the FMCW lidar by up to two orders of magnitude without deterioration of eye safety. This approach, when combined with photonic phase arrays11 based on nanophotonic gratings12, provides a technological basis for compact, massively parallel and ultrahigh-frame-rate coherent lidar systems.
RESUMO
This study explored the uptake of lead in the epigeic earthworm Dendrobaena veneta exposed to 0, 1000, and 2500 µg Pb/g soil. The soil metal content was extracted using strong acid digestion and water leaching, and analysed by means of Inductively Coupled Plasma Mass Spectrometry (ICP-MS) to estimate absolute and bioavailable concentrations of metals in the soil. The guts and heads of lead-exposed earthworms were processed into formalin-fixed and paraffin embedded sections for high-resolution multi-element metallomic imaging via Laser Ablation ICP-MS (LA-ICP-MS). Metallomic maps of phosphorus, zinc, and lead were produced at 15-µm resolution in the head and gut of D. veneta. Additional 4-µm resolution metallomic maps of the earthworm brains were taken, revealing the detailed localisation of metals in the brain. The Pb bioaccumulated in the chloragogenous tissues of the earthworm in a dose-dependent manner, making it possible to track the extent of soil contamination. The bioaccumulation of P and Zn in earthworm tissues was independent of Pb exposure concentration. This approach demonstrates the utility of LA-ICP-MS as a powerful approach for ecotoxicology and environmental risk assessments.
Assuntos
Metais Pesados , Oligoquetos , Poluentes do Solo , Animais , Ecotoxicologia , Chumbo/toxicidade , Chumbo/análise , Metais Pesados/toxicidade , Encéfalo , Solo/química , Poluentes do Solo/toxicidade , Poluentes do Solo/análiseRESUMO
Previously, space-time wave packets (STWPs) have been generated in free space with reduced diffraction and a tunable group velocity by combining multiple frequency comb lines each carrying a single Bessel mode with a unique wave number. It might be potentially desirable to propagate the STWP through fiber for reconfigurable positioning. However, fiber mode coupling might degrade the output STWP and distort its propagation characteristics. In this Letter, we experimentally demonstrate STWP generation and propagation over 1-m graded-index multi-mode fiber. Fiber mode coupling is mitigated by pre-distortion according to the inverse matrix of the fiber mode coupling matrix. Measurement of the STWP at the fiber output shows that its group velocity can vary from 1.0042c to 0.9967c by tuning the wave number of the Bessel mode on each frequency. The measured time-averaged intensity profiles show that the beam radius remains similar after 150-mm free-space propagation after exiting the fiber.
RESUMO
Solitons are waveforms that preserve their shape while propagating, as a result of a balance of dispersion and nonlinearity. Soliton-based data transmission schemes were investigated in the 1980s and showed promise as a way of overcoming the limitations imposed by dispersion of optical fibres. However, these approaches were later abandoned in favour of wavelength-division multiplexing schemes, which are easier to implement and offer improved scalability to higher data rates. Here we show that solitons could make a comeback in optical communications, not as a competitor but as a key element of massively parallel wavelength-division multiplexing. Instead of encoding data on the soliton pulse train itself, we use continuous-wave tones of the associated frequency comb as carriers for communication. Dissipative Kerr solitons (DKSs) (solitons that rely on a double balance of parametric gain and cavity loss, as well as dispersion and nonlinearity) are generated as continuously circulating pulses in an integrated silicon nitride microresonator via four-photon interactions mediated by the Kerr nonlinearity, leading to low-noise, spectrally smooth, broadband optical frequency combs. We use two interleaved DKS frequency combs to transmit a data stream of more than 50 terabits per second on 179 individual optical carriers that span the entire telecommunication C and L bands (centred around infrared telecommunication wavelengths of 1.55 micrometres). We also demonstrate coherent detection of a wavelength-division multiplexing data stream by using a pair of DKS frequency combs-one as a multi-wavelength light source at the transmitter and the other as the corresponding local oscillator at the receiver. This approach exploits the scalability of microresonator-based DKS frequency comb sources for massively parallel optical communications at both the transmitter and the receiver. Our results demonstrate the potential of these sources to replace the arrays of continuous-wave lasers that are currently used in high-speed communications. In combination with advanced spatial multiplexing schemes and highly integrated silicon photonic circuits, DKS frequency combs could bring chip-scale petabit-per-second transceivers into reach.
RESUMO
Space-time (ST) wave packets, in which spatial and temporal characteristics are coupled, have gained attention due to their unique propagation characteristics, such as propagation invariance and tunable group velocity in addition to their potential ability to carry orbital angular momentum (OAM). Through experiment and simulation, we explore the generation of OAM-carrying ST wave packets, with the unique property of a time-dependent beam radius at various ranges of propagation distances. To achieve this, we synthesize multiple frequency comb lines, each assigned to a coherent combination of multiple Laguerre-Gaussian (LGâ,p) modes with the same azimuthal index but different radial indices. The time-dependent interference among the spatial modes at the different frequencies leads to the generation of the desired OAM-carrying ST wave packet with dynamically varying radii. The simulation results indicate that the dynamic range of beam radius oscillations increases with the number of modes and frequency lines. The simulated ST wave packet for OAM of orders +1 or +3 has an OAM purity of >95%. In addition, we experimentally generate and measure the OAM-carrying ST wave packets with time-dependent beam radii. In the experiment, several lines of a Kerr frequency comb are spatially modulated with the superposition of multiple LG modes and combined to generate such an ST wave packet. In the experiment, ST wave packets for OAM of orders +1 or +3 have an OAM purity of >64%. In simulation and experiment, OAM purity decreases and beam radius becomes larger over the propagation.
RESUMO
Novel forms of light beams carrying orbital angular momentum (OAM) have recently gained interest, especially due to some of their intriguing propagation features. Here, we experimentally demonstrate the generation of near-diffraction-free two-dimensional (2D) space-time (ST) OAM wave packets (â = +1, +2, or +3) with variable group velocities in free space by coherently combining multiple frequency comb lines, each carrying a unique Bessel mode. Introducing a controllable specific correlation between temporal frequencies and spatial frequencies of these Bessel modes, we experimentally generate and detect near-diffraction-free OAM wave packets with high mode purities (>86%). Moreover, the group velocity can be controlled from 0.9933c to 1.0069c (c is the speed of light in vacuum). These ST OAM wave packets might find applications in imaging, nonlinear optics, and optical communications. In addition, our approach might also provide some insights for generating other interesting ST beams.
RESUMO
Space-time (ST) wave packets have gained much interest due to their dynamic optical properties. Such wave packets can be generated by synthesizing frequency comb lines, each having multiple complex-weighted spatial modes, to carry dynamically changing orbital angular momentum (OAM) values. Here, we investigate the tunability of such ST wave packets by varying the number of frequency comb lines and the combinations of spatial modes on each frequency. We experimentally generate and measure the wave packets with tunable OAM values from +1 to +6 or from +1 to +4 during a â¼5.2-ps period. We also investigate, in simulation, the temporal pulse width of the ST wave packet and the nonlinear variation of the OAM values. The simulation results show that: (i) a pulse width can be narrower for the ST wave packet carrying dynamically changing OAM values using more frequency lines; and (ii) the nonlinearly varying OAM value can result in different frequency chirps along the azimuthal direction at different time instants.
RESUMO
We experimentally demonstrate Kramers-Kronig detection of four 20 Gbaud 16-quadrature-amplitude-modulated (QAM) channels after 50 km fiber transmission using two soliton Kerr combs as signal sources and local oscillators. The estimated carrier phase at the receiver for each of the channels is relatively similar due to the coherence between the frequency comb lines. The standard deviation of the estimated carrier phase difference of the channels is less than 0.08 rad after 50 km single-mode fiber (SMF) transmission. This enables the carrier phase recovery derived from one channel to be shared among multiple channels. In the back-to-back scenario, the bit error rate (BER) performance for shared carrier phase recovery shows an optical signal-to-noise ratio penalty of ${\sim}{0.5}\;{\rm dB}$â¼0.5dB compared to the BER performance for carrier phase recovery when derived for each channel independently. BERs below the forward error correction threshold are achieved after 50 km SMF transmission with both independent and shared carrier phase recovery for four 20-Gbaud 16-QAM signals.
RESUMO
Integrated photonics is increasing in importance for compact, robust, and scalable enabling quantum technologies. This is particularly interesting for developing quantum communication networks, where resources need to be deployed in the field. We exploit photonic chip-based Si3N4 microring resonators to realise a photon pair source with low-loss, high-noise suppression and coincidence rates of 80×103 s-1. A simple photonic noise characterisation technique is presented that distinguishes linear and nonlinear contributions useful for system design and optimisation. We then demonstrate an all-fiber 750 MHz clock-rate sequential Time-Bin entanglement scheme with raw interference visibilities > 98 %.
RESUMO
We experimentally demonstrate that a single microresonator can emit two orthogonally polarized individually coherent combs: (i) a strong polarized soliton comb and (ii) an orthogonally polarized continuous wave seeded weaker comb, generated from the first one via cross-phase modulation, sharing the repetition rate of the soliton comb. Experimental results show that the power of the transverse electric-polarized seed can be well below the threshold of comb generation (e.g., 0.1 mW). In addition, simulations show that a dark pulse could be generated in the anomalous dispersion regime by a bright soliton when the two orthogonally polarized modes have the same group velocity in the microresonator.
RESUMO
Sinc-shaped temporal pulse trains have a spectrally efficient, rectangular Nyquist spectrum. We demonstrate the simultaneous and reconfigurable optical generation of multiple Nyquist-shaped wavelength-division-multiplexed (WDM) channels having temporal sinc-shaped pulse trains as data carriers. The channels are generated through the insertion of coherent lines using cascaded continuous-wave amplitude modulation around the spectral lines of a microresonator-based Kerr optical frequency comb. For each of nine Kerr frequency comb lines, we insert sub-groups of uniform and coherent lines to generate nine WDM channels. The deviations from ideal Nyquist pulses for the nine channels at repetition rates of 6 and 2 GHz are between 4.2%-6.1% and 2%-4.5%, respectively. Each WDM channel is modulated with on-off keying (OOK) at 6 Gbit/s. In addition, we show the reconfigurability of this method by varying the number of WDM channels, the generated sinc-shaped pulse train repetition rates, the duration, and the number of zero-crossings.
RESUMO
We experimentally investigate the effects of erbium-doped fiber amplifier induced pump noise on soliton Kerr frequency combs for 64-quadrature amplitude modulation (QAM) transmission. We find that the optical carrier-to-noise ratios (OCNRs) of the comb lines across the C-band almost linearly depend on the pump OCNR and are similar for a constant input pump power and noise. For a specific three-soliton state, despite higher comb line power, there is no noticeable OCNR improvement compared to the single-soliton comb. When the ASE noise on the pump is varied by 10 dB in the stable single-soliton state, the comb linewidths remain relatively unchanged and similar to the pump linewidth. Furthermore, four lines of the single-soliton Kerr comb produced by a pump light at an OCNR larger than 52 dB are used as coherent light sources to transmit 20-Gbaud 64-QAM signals over a 25-km fiber with bit error rate below the forward-error correction threshold.
RESUMO
We experimentally demonstrate a scalable and reconfigurable optical tapped-delay-line (TDL) for multichannel equalization and correlation of 20-Gbaud quadrature-phase-shift-keyed (QPSK) signals using nonlinear wave mixing and a microresonator Kerr frequency comb. The optical TDL mainly consists of two stages: one being a multicasting of the original signals in a periodically poled lithium niobate (PPLN) waveguide with Kerr comb lines functioning as mutually coherent pumps, while the other is a coherent multiplexing of the delayed and weighted signal replicas in a second PPLN. A two- or three-tap optical TDL is demonstrated to simultaneously equalize a distorted QPSK data signal, reducing the error vector magnitude (EVM) from 22.5% to either 19.9% or 18.2%, and search two- or three-symbol patterns on another QPSK signal.
RESUMO
We experimentally generate high-coherence primary Kerr combs with multiple sub-lines by using dual pumps and demonstrate the application of a primary comb state in multichannel communications. We find that more than 10 primary comb lines can be generated within the spectrum of modulation instability gain in our microring resonator. The generation is also verified by numerical simulations and the measured linewidth confirms the high coherence of the generated primary comb lines. We also demonstrate the high-coherence characteristics in a coherent communication experiment, in which each comb line is encoded with 20 Gbaud quadrature phase-shift-keyed signals.
RESUMO
We experimentally insert a flexible number of electro-optical (EO) comb lines into a Kerr frequency comb via EO modulation and demonstrate the use of combined Kerr and EO combs as light sources in coherent communications. The number of EO lines inserted into the Kerr comb can be varied by changing the modulation frequency. Additionally, the inserted EO comb is found to have similar coherence to that of the Kerr comb, as indicated by their linewidths. The high coherence of both the Kerr and EO combs has further been demonstrated in a communication experiment in which the comb lines are encoded with 10 Gbaud quadrature phase-shift-keyed signals. The increased number of comb lines after EO modulation indicates the possibility of obtaining more data channels in optical communications.
RESUMO
We experimentally demonstrate pump-linewidth-tolerant wavelength multicasting using microresonator-based soliton Kerr frequency combs. When Kerr comb lines serve as coherent pumps in a periodically poled lithium niobate waveguide, the linewidth of the multicast signal almost remains that of the original signal at different linewidths of Kerr combs, ranging from 100 kHz to 1 MHz. However, in conventional multicasting where free-running (FR) pumps are used, the linewidth of the converted signal significantly increases. Furthermore, the error vector magnitude (EVM) performance demonstrates eight-fold error-free multicasting of 10 Gbaud 16-quadrature amplitude modulation signals, even when the linewidths of the Kerr combs are as broad as 1 MHz (no Kalman filtering algorithm in the receiver). In contrast, the EVM performance of the signal copy is degraded with an FR laser as a dummy pump.
RESUMO
We experimentally investigate the dependence of Kerr comb generation, comb linewidth, and coherent system performance on the pump linewidth in a microresonator. We find that the generation of the primary comb can have a larger tolerance to the pump linewidth compared with that of the low-phase-noise comb. In addition, the linewidths of the generated combs are almost linearly dependent on the pump linewidth in the primary and low-phase-noise states. Furthermore, the optical signal-to-noise ratio penalty between the pump and generated Kerr combs in a coherent communication system is less than 0.2 dB in both the primary and low-phase-noise states, showing that Kerr frequency combs in these two states can have similar coherent system performance to the pump.
RESUMO
We experimentally demonstrate optical multicasting using Kerr frequency combs generated from a Si3N4 microresonator. We obtain Kerr combs in two states with different noise properties by varying the pump wavelength in the resonator and investigate the effect of Kerr combs on multicasting. Seven-fold multicasting of 20 Gbaud quadrature phase-shift-keyed signals and four-fold multicasting of 16-quadrature amplitude modulation signals have been achieved when low-phase-noise combs are input into a periodically poled lithium niobate waveguide. In addition, we find that the wavelength conversion efficiency in the PPLN waveguide for chaotic combs with high noise is similar to that for low-noise combs, while the signal quality of the multicast copy is significantly degraded.
RESUMO
The formation of temporal dissipative Kerr solitons in microresonators driven by a continuous-wave laser enables the generation of coherent, broadband, and spectrally smooth optical frequency combs as well as femtosecond pulse sources with compact form factors. Here we report the observation of a Raman-induced soliton self-frequency shift for a microresonator dissipative Kerr soliton also referred to as the frequency-locked Raman soliton. In amorphous silicon nitride microresonator-based single soliton states the Raman effect manifests itself by a spectrum that is sech^{2} in shape and whose center is spectrally redshifted from the continuous wave pump laser. The shift is theoretically described by the first-order shock term of the material's Raman response, and we infer a Raman shock time of â¼20 fs for amorphous silicon nitride. Moreover, we observe that the Raman-induced frequency shift can lead to a cancellation or overcompensation of the soliton recoil caused by the formation of a coherent dispersive wave. The observations are in agreement with numerical simulations based on the Lugiato-Lefever equation with a Raman shock term. Our results contribute to the understanding of Kerr frequency combs in the soliton regime, enable one to substantially improve the accuracy of modeling, and are relevant to the understanding of the fundamental timing jitter of microresonator solitons.
RESUMO
Laser-based ranging (LiDAR) - already ubiquitously used in industrial monitoring, atmospheric dynamics, or geodesy - is a key sensor technology. Coherent laser ranging, in contrast to time-of-flight approaches, is immune to ambient light, operates continuous-wave allowing higher average powers, and yields simultaneous velocity and distance information. State-of-the-art coherent single laser-detector architectures reach hundreds of kilopixel per second sampling rates, while emerging applications - autonomous driving, robotics, and augmented reality - mandate megapixel per second point sampling to support real-time video-rate imaging. Yet, such rates of coherent LiDAR have not been demonstrated. Recent advances in photonic chip-based microcombs provide a route to higher acquisition speeds via parallelization but require separation of individual channels at the detector side, increasing photonic integration complexity. Here we overcome the challenge and report a hardware-efficient swept dual-soliton microcomb technique that achieves coherent ranging and velocimetry at megapixel per second line scan measurement rates with up to 64 optical channels. Multiheterodyning two synchronously frequency-modulated microcombs yields distance and velocity information of all individual ranging channels on a single receiver alleviating the need for individual separation, detection, and digitization. The reported LiDAR implementation is compatible with photonic integration and demonstrates the significant advantages of acquisition speed afforded by the convergence of optical telecommunication and metrology technologies.