Adatom-Driven Oxygen Intermixing during the Deposition of Oxide Thin Films by Molecular Beam Epitaxy.

Thin film deposition from the vapor phase is a complex process involving adatom adsorption, movement, and incorporation into the growing film. Here, we present quantitative experimental data that reveals anion intermixing over long length scales during the deposition of epitaxial Fe2O3 and Cr2O3 films and heterostructures by oxygen-plasma-assisted molecular beam epitaxy. We track this diffusion by incorporating well-defined tracer layers containing 18O and/or 57Fe and measure their redistribution on the nanometer scale with atom probe tomography. Molecular dynamics simulations suggest potential intermixing events, which are then examined via nudged elastic band calculations. We reveal that adatoms on the film surface act to "pull up" subsurface O and Fe. Subsequent ring-like rotation mechanisms involving both adatom and subsurface anions then facilitate their mixing. In addition to film deposition, these intermixing mechanisms may be operant during other surface-mediated processes such as heterogeneous catalysis and corrosion.

Percolation of Ion-Irradiation-Induced Disorder in Complex Oxide Interfaces.

Mastery of order-disorder processes in highly nonequilibrium nanostructured oxides has significant implications for the development of emerging energy technologies. However, we are presently limited in our ability to quantify and harness these processes at high spatial, chemical, and temporal resolution, particularly in extreme environments. Here, we describe the percolation of disorder at the model oxide interface LaMnO3/SrTiO3, which we visualize during in situ ion irradiation in the transmission electron microscope. We observe the formation of a network of disorder during the initial stages of ion irradiation and track the global progression of the system to full disorder. We couple these measurements with detailed structural and chemical probes, examining possible underlying defect mechanisms responsible for this unique percolative behavior.

Understanding the Electronic Structure Evolution of Epitaxial LaNi1-xFexO3 Thin Films for Water Oxidation.

Rare earth nickelates including LaNiO3 are promising catalysts for water electrolysis to produce oxygen gas. Recent studies report that Fe substitution for Ni can significantly enhance the oxygen evolution reaction (OER) activity of LaNiO3. However, the role of Fe in increasing the activity remains ambiguous, with potential origins that are both structural and electronic in nature. On the basis of a series of epitaxial LaNi1-xFexO3 thin films synthesized by molecular beam epitaxy, we report that Fe substitution tunes the Ni oxidation state in LaNi1-xFexO3 and a volcano-like OER trend is observed, with x = 0.375 being the most active. Spectroscopy and ab initio modeling reveal that high-valent Fe3+δ cationic species strongly increase the transition-metal (TM) 3d bandwidth via Ni-O-Fe bridges and enhance TM 3d-O 2p hybridization, boosting the OER activity. These studies deepen our understanding of structural and electronic contributions that give rise to enhanced OER activity in perovskite oxides.

Effect of doping and chemical ordering on the optoelectronic properties of complex oxides: Fe2O3-V2O3 solid solutions and hetero-structures.

The electronic and optical properties of α-(Fe1-xVx)2O3 at low (x = 0.04) and high (x = 0.5) doping levels are investigated using a combination of periodic and embedded cluster approaches, and time-dependent density functional theory. At low V concentrations the onset of the optical absorption is ∼0.5 eV (i.e., nearly 1.6 eV lower than that in pure α-Fe2O3) and corresponds to the electron transitions from V 3d to Fe 3d* orbitals. At high V concentrations, optical absorption energies and intensities are sensitive to specific arrangements of Fe and V atoms and their spin configuration that determine Fe-V hybridization. The onset of the lowest inter-vanadium absorption band in the case of Fe2O3/V2O3 hetero-structures is as low as ∼0.3 eV and the corresponding peak is at ∼0.7 eV. In contrast, in the case of solid solutions this peak has lower intensity and is shifted to higher energy (∼1.2 eV). Analysis of the orbital character of electronic excitation suggests that Fe2O3/V2O3 hetero-structures absorb light much more effectively than random alloys, thus promoting efficient photo-induced carrier generation. These predictions can be tested in α-(Fe1-xVx)2O3 thin films synthesized with well-controlled spatial distribution of Fe and V species.

Correlation between oxygen evolution reaction activity and surface compositional evolution in epitaxial La0.5Sr0.5Ni1-xFexO3-δ thin films.

Water electrolysis can use renewable electricity to produce green hydrogen, a portable fuel and sustainable chemical precursor. Improving electrolyzer efficiency hinges on the activity of the oxygen evolution reaction (OER) catalyst. Earth-abundant, ABO3-type perovskite oxides offer great compositional, structural, and electronic tunability, with previous studies showing compositional substitution can increase the OER activity drastically. However, the relationship between the tailored bulk composition and that of the surface, where OER occurs, remains unclear. Here, we study the effects of electrochemical cycling on the OER activity of La0.5Sr0.5Ni1-xFexO3-δ (x = 0-0.5) epitaxial films grown by oxide molecular beam epitaxy as a model Sr-containing perovskite oxide. Electrochemical testing and surface-sensitive spectroscopic analyses show Ni segregation, which is affected by electrochemical history, along with surface amorphization, coupled with changes in OER activity. Our findings highlight the importance of surface composition and electrochemical cycling conditions in understanding OER performance, suggesting common motifs of the active surface with high surface area systems.

Electronic and structural properties of single-crystal Jahn-Teller active Co1+x Mn2-x O4 thin films.

Recent investigations on spinel CoMn2O4 have shown its potential for applications in water splitting and fuel cell technologies as it exhibits strong catalytic behavior through oxygen reduction reactivity. To further understand this material, we report for the first time the synthesis of single-crystalline Co1+x Mn2-x O4 thin films using molecular beam epitaxy. By varying sample composition, we establish links between cation stoichiometry and material properties using in-situ x-ray photoelectron spectroscopy, x-ray diffraction, scanning transmission electron microscopy, x-ray absorption spectroscopy, and spectroscopic ellipsometry. Our results indicate that excess Co ions occupy tetrahedral interstitial sites at lower excess Co stoichiometries, and become substitutional for octahedrally-coordinated Mn at higher Co levels. We compare these results with density functional theory models of stoichiometric CoMn2O4 to understand how the Jahn-Teller distortion and hybridization in Mn-O bonds impact the ability to hole dope the material with excess Co. The findings provide important insights into CoMn2O4 and related spinel oxides that are promising candidates for inexpensive oxygen reduction reaction catalysts.

Incorporation of Ti in epitaxial Fe2TiO4thin films.

The titanomagnetites (Fe2-xTixO4,x⩽ 1) are a family of reducible spinel-structure oxides of interest for their favorable magnetic, catalytic, and electrical transport properties. To understand the stability of the system during low temperature deposition, epitaxial thin films of Fe2TiO4were deposited by molecular beam epitaxy (MBE) on MgO(001) at 250-375 °C. The homogeneous incorporation of Ti, Fe valence state, and film morphology were all found to be strongly dependent on the oxidation conditions at the low substrate temperatures employed. More oxidizing conditions led to phase separation into epitaxial, faceted Fe3O4and rutile TiO2. Less oxidizing conditions resulted in polycrystalline films that exhibited Ti segregation to the film surface, as well as mixed Fe valence (Fe3+, Fe2+, Fe0). A narrow window of intermediate oxygen partial pressure during deposition yielded nearly homogeneous Ti incorporation and a large fraction of Fe2+. However, these films were poorly crystallized, and no occupation of tetrahedral sites in the spinel lattice by Fe2+was detected by x-ray magnetic circular dichroism at the Fe L-edge. After vacuum annealing, a small fraction of Fe2+was found to occupy tetrahedral sites. Comparison of these results with previous work suggests that the low temperature deposition conditions imposed by use of MgO substrates limits the incorporation of Ti into the spinel lattice. This work suggests a path towards obtaining stoichiometric, well-crystallized Fe2TiO4by MBE by utilizing high substrate temperature and low oxygen partial pressure during deposition on thermally stable substrates.

Reversible Oxidation Quantified by Optical Properties in Epitaxial Fe2CrO4+δ Films on (001) MgAl2O4.

We report on the structural and optical properties of Fe2CrO4+δ epitaxial films grown by molecular beam epitaxy on MgAl2O4 (001) as a function of δ (average cation valence). The average Fe valence is linked to the out-of-plane lattice parameter and the extent of light absorption in the infrared spectral region. Over-oxidized films (0 < δ < 0.5) exhibit smaller lattice parameters and suppressed infrared absorption. The lattice parameter is found to differ for films of equivalent oxidation state but different thermal histories. We discuss the behavior of a novel infrared transition present at ∼0.6 eV in Fe2CrO4 films deposited at or above 400 °C. An optical transition found in all films at 0.9 eV independent of the synthesis temperature can be used to quantify the oxidation state of Fe2CrO4+δ. This research provides new insights into the atomic structure, optical processes, oxidation states, electronic structure, and application potential of Fe2CrO4+δ.

Electronic and Structural Properties of Single-crystal Jahn-Teller Active Co1+xMn2-xO4Thin Films.

Recent investigations on spinel CoMn2O4have shown its potential for applications in water splitting and fuel cell technologies as it exhibits strong catalytic behavior through oxygen reduction reactivity. To further understand this material, we report for the first time the synthesis of single-crystalline Co1+xMn2-xO4thin films using molecular beam epitaxy. By varying sample composition, we establish links between cation stoichiometry and material properties using in-situ x-ray photoelectron spectroscopy, x-ray diffraction, scanning transmission electron microscopy, x-ray absorption spectroscopy, and spectroscopic ellipsometry. Our results indicate that excess Co ions occupy tetrahedral interstitial sites at lower excess Co stoichiometries, and become substitutional for octahedrally-coordinated Mn at higher Co levels. We compare these results with density functional theory models of stoichiometric CoMn2O4to understand how the Jahn-Teller distortion and hybridization in Mn-O bonds impact the ability to hole dope the material with excess Co. The findings provide important insights into CoMn2O4and related spinel oxides that are promising candidates for inexpensive oxygen reduction reaction catalysts.

Tuning piezoelectric properties through epitaxy of La2Ti2O7 and related thin films.

Current piezoelectric sensors and actuators are limited to operating temperatures less than ~200 °C due to the low Curie temperature of the piezoelectric material. Strengthening the piezoelectric coupling of high-temperature piezoelectric materials, such as La2Ti2O7 (LTO), would allow sensors to operate across a broad temperature range. The crystalline orientation and piezoelectric coupling direction of LTO thin films can be controlled by epitaxial matching to SrTiO3(001), SrTiO3(110), and rutile TiO2(110) substrates via pulsed laser deposition. The structure and phase purity of the films are investigated by x-ray diffraction and scanning transmission electron microscopy. Piezoresponse force microscopy is used to measure the in-plane and out-of-plane piezoelectric coupling in the films. The strength of the out-of-plane piezoelectric coupling can be increased when the piezoelectric direction is rotated partially out-of-plane via epitaxy. The strongest out-of-plane coupling is observed for LTO/STO(001). Deposition on TiO2(110) results in epitaxial La2/3TiO3, an orthorhombic perovskite of interest as a microwave dielectric material and an ion conductor. La2/3TiO3 can be difficult to stabilize in bulk form, and epitaxial stabilization on TiO2(110) is a promising route to realize La2/3TiO3 for both fundamental studies and device applications. Overall, these results confirm that control of the crystalline orientation of epitaxial LTO-based materials can govern the resulting functional properties.

Infrared optical absorption in low-spin Fe(2+)-doped SrTiO3.

Band gap engineering in SrTiO3 and related titanate perovskites has long been explored due to the intriguing properties of the materials for photocatalysis and photovoltaic applications. A popular approach in the materials chemistry community is to substitutionally dope aliovalent transition metal ions onto the B site in the lattice to alter the valence band. However, in such a scheme there is limited control over the dopant valence, and compensating defects often form. Here we demonstrate a novel technique to controllably synthesize Fe(2+)- and Fe(3+)-doped SrTiO3 thin films without formation of compensating defects by co-doping with La(3+) ions on the A site. We stabilize Fe(2+)-doped films by doping with two La ions for every Fe dopant, and find that the Fe ions exhibit a low-spin electronic configuration, producing optical transitions in the near infrared regime and degenerate doping. The novel electronic states observed here offer a new avenue for band gap engineering in perovskites for photocatalytic and photovoltaic applications.

Built-In Potential in Fe2O3-Cr2O3 Superlattices for Improved Photoexcited Carrier Separation.

Hematite (α-Fe2 O3) is engineered to improve photoexcited electron-hole pair separation by synthesizing Fe2O3-Cr2O3 superlattices (SLs) with precise atomic control. The different surface terminations exhibited by Fe2O3 and Cr2O3 determine the hetero-junction interface structure and result in controllable, noncommutative band offset values. This controllable band alignment is harnessed to generate a built-in potential as large as 0.8 eV in Fe2 O3-Cr2O3 SLs.

Effect of Sr Content and Strain on Sr Surface Segregation of La1-xSrxCo0.2Fe0.8O3-δ as Cathode Material for Solid Oxide Fuel Cells.

Strontium-doped lanthanum cobalt ferrite (LSCF) is a widely used cathode material due to its high electronic and ionic conductivity, and reasonable oxygen surface exchange coefficient. However, LSCF can have long-term stability issues such as surface segregation of Sr during solid oxide fuel cell (SOFC) operation, which can adversely affect the electrochemical performance. Thus, understanding the nature of the Sr surface segregation phenomenon and how it is affected by the composition of LSCF and strain are critical. In this research, heteroepitaxial thin films of La1-x SrxCo0.2Fe0.8O3-δ with varying Sr content (x = 0.4, 0.3, 0.2) were deposited by pulsed laser deposition (PLD) on single-crystal NdGaO3, SrTiO3, and GdScO3 substrates, leading to different levels of strain in the films. The extent of Sr segregation at the film surface was quantified using synchrotron-based total-reflection X-ray fluorescence (TXRF) and atomic force microscopy (AFM). The electronic structure of the Sr-rich phases formed on the surface was investigated by hard X-ray photoelectron spectroscopy (HAXPES). The extent of Sr segregation was found to be a function of the Sr content in bulk. Lowering the Sr content from 40% to 30% reduced the surface segregation, but further lowering the Sr content to 20% increased the segregation. The strain of LSCF thin films on various substrates was measured using high-resolution X-ray diffraction (HRXRD), and the Sr surface segregation was found to be reduced with compressive strain and enhanced with tensile strain present within the thin films. A model was developed correlating the Sr surface segregation with Sr content and strain effects to explain the experimental results.

Optical absorption and spectral photoconductivity in α-(Fe1-xCrx)2O3 solid-solution thin films.

Hematite, α-Fe2O3, is an attractive narrow gap oxide for consideration as an efficient visible light photocatalyst, with significant potential for band gap engineering via doping. We examine optical absorption in α-(Fe1-xCrx)2O3 epitaxial films and explain the observed excitations, and the nature of the band gap dependence on x, through first-principles calculations. The calculated and measured optical band gap becomes smaller than that of bulk α-Fe2O3 and reaches a minimum as the Cr cation fraction increases to 50%. The lowest energy transitions in the mixed-metal alloys involve electron excitation from occupied Cr 3d orbitals to unoccupied Fe 3d orbitals, and they result in a measurable photocurrent. The onset of α-Fe2O3 photoconductivity can be reduced by nearly 0.5 eV (to 1.60 eV) through addition of Cr.

Magnetotransport properties of high quality Co:ZnO and Mn:ZnO single crystal pulsed laser deposition films: pitfalls associated with magnetotransport on high resistivity materials.

The electrical resistivity values for a series of pure and doped (Co, Mn, Al) ZnO epitaxial films grown by pulsed laser deposition were measured with equipment designed for determining the direct current resistivity of high resistance samples. Room-temperature resistances ranging from 7 x 10(1) to 4 x 10(8) Omega/sq were measured on vacuum-reduced cobalt-doped ZnO, (Al,Co) co-doped ZnO, pure cobalt-doped ZnO, Mn-doped ZnO, and undoped ZnO. Using a four-point collinear geometry with gold spring-loaded contacts, resistivities were measured from 295 to 5 K for resistances of < approximately 10(12) Omega/sq. In addition, magnetoresistance and Hall effect were measured as a function of temperature for select samples. Throughout the investigation, samples were also measured on commercially available instrumentation with good agreement. The challenges of transport measurements on high resistivity samples are discussed, along with some offered solutions to those challenges.