RESUMO
BACKGROUND: The interleukin-1 receptor antagonist (IL-1Ra) is a crucial molecule that counteracts the effects of interleukin-1 (IL-1) by binding to its receptor. A high concentration of IL-1Ra is required for complete inhibition of IL-1 activity. However, the currently available Escherichia coli-expressed IL-1Ra (E. coli IL-1Ra, Anakinra) has a limited half-life. This study aims to produce a cost-effective, functional IL-1Ra on an industrial scale by expressing it in the pyrG auxotroph Aspergillus oryzae. RESULTS: We purified A. oryzae-expressed IL-1Ra (Asp. IL-1Ra) using ion exchange and size exclusion chromatography (53 mg/L). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis revealed that Asp. IL-1Ra is N-glycosylated and approximately 17 kDa in size. We conducted a comparative study of the bioactivity, binding kinetics, and half-life between Asp. IL-1Ra and E. coli IL-1Ra. Asp. IL-1Ra showed good bioactivity even at a low concentration of 0.5 nM. The in vitro half-life of Asp. IL-1Ra was determined for different time points (0, 24, 48, 72, and 96 h) and showed higher stability than E. coli IL-1Ra, despite exhibiting a 100-fold lower binding affinity (2 nM). CONCLUSION: This study reports the production of a functional Asp. IL-1Ra with advantageous stability, without extensive downstream processing. To our knowledge, this is the first report of a recombinant functional and stable IL-1Ra expressed in A. oryzae. Our results suggest that Asp. IL-1Ra has potential for industrial-scale production as a cost-effective alternative to E. coli IL-1Ra.
Assuntos
Aspergillus oryzae , Proteína Antagonista do Receptor de Interleucina 1 , Proteína Antagonista do Receptor de Interleucina 1/genética , Proteína Antagonista do Receptor de Interleucina 1/química , Aspergillus oryzae/genética , Aspergillus oryzae/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Proteínas Recombinantes/metabolismo , Interleucina-1/metabolismo , Receptores de Interleucina-1/metabolismoRESUMO
Shear forces are involved in many cellular processes and increase remarkably in the case of cardiovascular diseases in the human body. While various stimuli, such as temperature, pH, light, and electromagnetic fields, have been considered for on-demand release, developing drug delivery systems that are responsive to physiological-level shear stresses remains as a challenge. For this purpose, liposomes embedded in hydrogel matrices are promising as they can dynamically engage with their environment due to their soft and deformable structure. However, for optimal drug delivery systems, the interaction between liposomes and the surrounding hydrogel matrix, and their response to the shear should be unraveled. Herein, we used unilamellar 1,2-Dimyristoyl-sn-glycero-3phosphocholine (DMPC) liposomes as drug nanocarriers and polyethylene (glycol) diacrylate (PEGDA) hydrogels having different elasticities, from 1 to 180 Pa, as extracellular matrix (ECM)-mimetic matrices to understand shear-triggered liposome discharge from hydrogels. The presence of liposomes provides hydrogels with temperature-controlled water uptake which is sensitive to membrane microviscosity. By systematically applying shear deformation from linear to nonlinear deformation regimes, the liposome release under transient and cyclic stimuli is modulated. Considering that shear force is commonly encountered in biofluid flow, these results will provide fundamental basis for rational design of shear-controlled liposomal drug delivery systems.
Assuntos
Lipossomos , Nanopartículas , Humanos , Lipossomos/química , Hidrogéis/química , Sistemas de Liberação de MedicamentosRESUMO
Circadian clock is an internal time keeping system recurring 24 h daily rhythm in physiology and behavior of organisms. Circadian clock contains transcription and translation feedback loop involving CLOCK/NPAS2, BMAL1, Cry1/2, and Per1/2. In common, heterodimer of CLOCK/NPAS2 and BMAL1 binds to EBOX element in the promoter of Per and Cry genes in order to activate their transcription. CRY and PER making heterodimeric complexes enter the nucleus in order to inhibit their own BMAL1-CLOCK-activated transcription. The aim of this study was to investigate and quantify real-time binding affinities of clock proteins among each other on and off DNA modes using surface plasmon resonance. The pairwise interaction coefficients among clock proteins, as well as interaction of PER2, CRY2, and PER2 : CRY2 proteins with BMAL1 : CLOCK complex in the presence and absence of EBOX motif have been investigated via analysis of surface plasmon resonance data with pseudo first-order reaction kinetics approximation and via nonlinear regression curve fitting. The results indicated that CRY2 and PER2, BMAL1, and CLOCK proteins form complexes in vitro and that PER2, CRY2 and PER2 : CRY2 complex have similar affinities toward BMAL1 : CLOCK complex. CRY2 protein had the highest affinity toward EBOX complex, whereas PER2 and CRY2 : PER2 complexes displayed low affinity toward EBOX complex. The quantification of the interaction between clock proteins is critical to understand the operation mechanism of the biological clock and to address the behavioral and physiological disorders, and it will be useful for the design of new drugs toward clock-related diseases.
Assuntos
Proteínas CLOCK/metabolismo , Relógios Circadianos/genética , Mapeamento de Interação de Proteínas , Fatores de Transcrição ARNTL/genética , Fatores de Transcrição ARNTL/metabolismo , Animais , Proteínas CLOCK/genética , Criptocromos/genética , Criptocromos/metabolismo , Humanos , Camundongos , Proteínas Circadianas Period/genética , Proteínas Circadianas Period/metabolismo , Regiões Promotoras GenéticasRESUMO
Tumor extracellular matrices (ECM) exhibit aberrant changes in composition and mechanics compared to normal tissues. Proteoglycans (PG) are vital regulators of cellular signaling in the ECM with the ability to modulate receptor tyrosine kinase (RTK) activation via their sulfated glycosaminoglycan (sGAG) side chains. However, their role on tumor cell behavior is controversial. Here, it is demonstrated that PGs are heavily expressed in lung adenocarcinoma (LUAD) patients in correlation with invasive phenotype and poor prognosis. A bioengineered human lung tumor model that recapitulates the increase of sGAGs in tumors in an organotypic matrix with independent control of stiffness, viscoelasticity, ligand density, and porosity, is developed. This model reveals that increased sulfation stimulates extensive proliferation, epithelial-mesenchymal transition (EMT), and stemness in cancer cells. The focal adhesion kinase (FAK)-phosphatidylinositol 3-kinase (PI3K) signaling axis is identified as a mediator of sulfation-induced molecular changes in cells upon activation of a distinct set of RTKs within tumor-mimetic hydrogels. The study shows that the transcriptomic landscape of tumor cells in response to increased sulfation resembles native PG-rich patient tumors by employing integrative omics and network modeling approaches.
RESUMO
This paper reports the previously unknown interactions between eight low molecular weight commercially available drugs (130-800 Da) and DNA repair protein photolyase using computational docking simulations and surface plasmon resonance (SPR) experiments. Theoretical dissociation constants, K(d), obtained from molecular docking simulations were compared with the values found from SPR experiments. Among the eight drugs analyzed, computational and experimental values showed similar binding affinities between selected drug and protein pairs. We found no significant differences in binding interactions between pure and commercial forms of the drug lornoxicam and DNA photolyase. Among the eight drugs studied, prednisone, desloratadine, and azelastine exhibited the highest binding affinity (K(d) = 1.65, 2.05, and 8.47 µM, respectively) toward DNA photolyase. Results obtained in this study are promising for use in the prediction of unknown interactions of common drugs with specific proteins such as human clock protein cryptochrome.
Assuntos
Desoxirribodipirimidina Fotoliase/metabolismo , Proteínas de Bactérias/metabolismo , Cinética , Loratadina/análogos & derivados , Loratadina/metabolismo , Peso Molecular , Ftalazinas/metabolismo , Piroxicam/análogos & derivados , Piroxicam/metabolismo , Prednisona/metabolismo , Ligação Proteica , Ressonância de Plasmônio de Superfície , Vibrio cholerae/enzimologiaRESUMO
Gelatin methacryloyl (GelMA) hydrogels are promising materials for tissue engineering applications due to their biocompatibility and tunable properties. However, the time-consuming process of preparing GelMA hydrogels with desirable properties for specific biomedical applications limits their clinical use. Visible-light-induced cross-linking is a well-known method for the preparation of GelMA hydrogels; however, a comprehensive investigation on the influence of critical parameters such as Eosin Y (EY), triethanolamine (TEA), and N-vinyl-2-pyrrolidone (NVP) concentrations on the stiffness and gelation time has yet to be performed. In this study, we systematically investigated the effect of these critical parameters on the stiffness and gelation time of GelMA hydrogels. We developed an artificial neural network (ANN) model with three input variables, EY, TEA, and NVP concentrations, and two output variables, Young's modulus and gelation time, derived from our experimental design. Through the alteration of individual chemical concentrations, [EY] between 0.005 and 0.5 mM and [TEA] and [NVP] between 10 and 1000 mM, we studied the impact of these alterations on the real-time values of stiffness and gelation time. Furthermore, we demonstrated the validity of the ANN model in predicting the properties of GelMA hydrogels. We also studied cell survival to establish nontoxic concentration ranges for each component, enabling safer use of GelMA hydrogels in relevant biomedical applications. Our results showed that the ANN model can accurately predict the properties of GelMA hydrogels, allowing for the synthesis of hydrogels with desirable stiffness for various biomedical applications. In conclusion, our study provides a comprehensive library that characterizes the stiffness and gelation time and demonstrates the potential of the ANN model to predict these properties of GelMA hydrogels depending on the critical parameters. The ANN models developed here can facilitate the optimization of GelMA hydrogels with the most efficient mechanical properties that resemble a native extracellular matrix and better address the need in the in vivo microenvironment. The approach of this study is to bring research about the synthesis of GelMA hydrogels to a new level where the synthesis of these hydrogels can be standardized with minimum cost and effort.
RESUMO
The use of extracellular matrix (ECM)-derived hydrogels in tissue engineering has become increasingly popular, as they can mimic cells' natural environment in vitro. However, maintaining the native biochemical content of the ECM, achieving mechanical stability, and comprehending the impact of the decellularization process on the mechanical properties of the ECM hydrogels are challenging. Here, a pipeline for decellularization of bovine lung tissue using two different protocols, downstream characterization of the effectiveness of decellularization, fabrication of reconstituted decellularized lung ECM hydrogels and assessment of their mechanical and cytocompatibility properties were described. Decellularization of the bovine lung was pursued using a physical (freeze-thaw cycles) or chemical (detergent-based) method. Hematoxylin and Eosin staining was performed to validate the decellularization and retention of major ECM components. For the evaluation of residual collagen and sulfated glycosaminoglycan (sGAG) content within the decellularized samples, Sirius red and Alcian blue staining techniques were employed, respectively. Mechanical properties of the decellularized lung ECM hydrogels were characterized by oscillatory rheology. The results suggest that decellularized bovine lung hydrogels can provide a reliable organotypic alternative to commercial ECM products by retaining most native ECM components. Furthermore, these findings reveal that the decellularization method of choice significantly affects gelation kinetics as well as the stiffness and viscoelastic properties of resulting hydrogels.
Assuntos
Matriz Extracelular , Hidrogéis , Animais , Bovinos , Hidrogéis/química , Matriz Extracelular/química , Colágeno/química , Engenharia Tecidual/métodos , Pulmão , Alicerces TeciduaisRESUMO
Extracellular matrix (ECM)-derived hydrogels are in demand for use in lung tissue engineering to mimic the native microenvironment of cells in vitro. Decellularization of native tissues has been pursued for preserving organotypic ECM while eliminating cellular content and reconstitution into scaffolds which allows re-cellularization for modeling homeostasis, regeneration, or diseases. Achieving mechanical stability and understanding the effects of the decellularization process on mechanical parameters of the reconstituted ECM hydrogels present a challenge in the field. Stiffness and viscoelasticity are important characteristics of tissue mechanics that regulate crucial cellular processes and their in vitro representation in engineered models is a current aspiration. The effect of decellularization on viscoelastic properties of resulting ECM hydrogels has not yet been addressed. The aim of this study was to establish bovine lung tissue decellularization for the first time via pursuing four different protocols and characterization of reconstituted decellularized lung ECM hydrogels for biochemical and mechanical properties. Our data reveal that bovine lungs provide a reproducible alternative to human lungs for disease modeling with optimal retention of ECM components upon decellularization. We demonstrate that the decellularization method significantly affects ECM content, stiffness, and viscoelastic properties of resulting hydrogels. Lastly, we examined the impact of these aspects on viability, morphology, and growth of lung cancer cells, healthy bronchial epithelial cells, and patient-derived lung organoids.
Assuntos
Hidrogéis , Pulmão , Humanos , Animais , Bovinos , Hidrogéis/química , Matriz Extracelular/química , Engenharia Tecidual/métodosRESUMO
Understanding dynamic and complex interaction of biological membranes with extracellular matrices plays a crucial role in controlling a variety of cell behavior and functions, from cell adhesion and growth to signaling and differentiation. Tremendous interest in tissue engineering has made it possible to design polymeric scaffolds mimicking the topology and mechanical properties of the native extracellular microenvironment; however, a fundamental question remains unanswered: that is, how the viscoelastic extracellular environment modifies the hierarchical dynamics of lipid membranes. In this work, we used aqueous solutions of poly(ethylene glycol) (PEG) with different molecular weights to mimic the viscous medium of cells and nearly monodisperse unilamellar DMPC/DMPG liposomes as a membrane model. Using small-angle X-ray scattering (SAXS), dynamic light scattering, temperature-modulated differential scanning calorimetry, bulk rheology, and fluorescence lifetime spectroscopy, we investigated the structural phase map and multiscale dynamics of the liposome-polymer mixtures. The results suggest an unprecedented dynamic coupling between polymer chains and phospholipid bilayers at different length/time scales. The microviscosity of the lipid bilayers is directly influenced by the relaxation of the whole chain, resulting in accelerated dynamics of lipids within the bilayers in the case of short chains compared to the polymer-free liposome case. At the macroscopic level, the gel-to-fluid transition of the bilayers results in a remarkable thermal-stiffening behavior of polymer-liposome solutions that can be modified by the concentration of the liposomes and the polymer chain length.
RESUMO
Cell-based therapies hold significant advantages in comparison with the traditional drug-based or injection-based treatments. However, for long-term functional cellular implants, immune acceptance must be established. To accomplish the acceptance of the implanted cells, various biomaterial systems have been studied. Nanogels have shown great potential for modulation of cellular microenvironments, acting as a physical barrier between the immune system and the implant. However, internalization of nano-scale materials by implanted cells is not desirable and is yet to be overcome. In this study, we incorporated acrylate modified cholesterol-bearing pullulan (CHPOA) nanogels into poly (ethylene glycol) diacrylate (PEGDA) hydrogels through covalent crosslinking, where we used visible light-induced photopolymerization. We characterized morphology and swelling properties of CHPOA incorporated PEG composite hydrogels using FE-SEM and gravimetric analysis. Also, we investigated the biocompatibility properties of composite hydrogels in vivo, where we used both healthy and diabetic mice. We induced diabetes in mice using a low dose streptozotocin (STZ) injections and implanted composite hydrogels in both diabetic and healthy mice through subcutaneous route. Immune cell infiltration of the retrieved tissue was examined through histological analysis, where we observed minimum immune response levels of 0-2 rareness, according to ISO standard of biological evaluation of medical devices. Our observation suggests that the composite hydrogel developed here can be used to introduce nanostructured domains into bulk hydrogels and that this system has potential to be used as immunologically acceptable composite material in cellular therapy without internalization of nanoparticles.
Assuntos
Diabetes Mellitus Experimental , Acrilatos/farmacologia , Animais , Materiais Biocompatíveis/farmacologia , Colesterol , Hidrogéis/farmacologia , Camundongos , Nanogéis , Polietilenoglicóis/farmacologia , Polietilenoimina , EstreptozocinaRESUMO
Corneal collagen crosslinking (CXL) is a commonly used minimally invasive surgical technique to prevent the progression of corneal ectasias, such as keratoconus. Unfortunately, riboflavin/UV-A light-based CXL procedures have not been successfully applied to all patients, and result in frequent complications, such as corneal haze and endothelial damage. We propose a new method for corneal crosslinking by using a Ruthenium (Ru) based water-soluble photoinitiator and visible light (430 nm). Tris(bipyridine)ruthenium(II) ([Ru(bpy)3]2+) and sodium persulfate (SPS) mixture covalently crosslinks free tyrosine, histidine, and lysine groups under visible light (400-450 nm), which prevents UV-A light-induced cytotoxicity in an efficient and time saving collagen crosslinking procedure. In this study, we investigated the effects of the Ru/visible blue light procedure on the viability and toxicity of human corneal epithelium, limbal, and stromal cells. Then bovine corneas crosslinked with ruthenium mixture and visible light were characterized, and their biomechanical properties were compared with the customized riboflavin/UV-A crosslinking approach in the clinics. Crosslinked corneas with a ruthenium-based CXL approach showed significantly higher young's modulus compared to riboflavin/UV-A light-based method applied to corneas. In addition, crosslinked corneas with both methods were characterized to evaluate the hydrodynamic behavior, optical transparency, and enzymatic resistance. In all biomechanical, biochemical, and optical tests used here, corneas that were crosslinked with ruthenium-based approach demonstrated better results than that of corneas crosslinked with riboflavin/ UV-A. This study is promising to be translated into a non-surgical therapy for all ectatic corneal pathologies as a result of mild conditions introduced here with visible light exposure and a nontoxic ruthenium-based photoinitiator to the cornea. STATEMENT OF SIGNIFICANCE: Keratoconus, one of the most frequent corneal diseases, could be treated with riboflavin and ultraviolet light-based photo-crosslinking application to the cornea of the patients. Unfortunately, this method has irreversible side effects and cannot be applied to all keratoconus patients. In this study, we exploited the photoactivation behavior of an organoruthenium compound to achieve corneal crosslinking. Ruthenium-based organic complex under visible light demonstrated significantly better biocompatibility and superior biomechanical results than riboflavin and ultraviolet light application. This study promises to translate into a new fast, efficient non-surgical therapy option for all ectatic corneal pathologies.
Assuntos
Ceratocone , Fotoquimioterapia , Rutênio , Animais , Bovinos , Colágeno/farmacologia , Córnea/patologia , Reagentes de Ligações Cruzadas/farmacologia , Humanos , Ceratocone/tratamento farmacológico , Ceratocone/patologia , Fármacos Fotossensibilizantes/farmacologia , Fármacos Fotossensibilizantes/uso terapêutico , Riboflavina/farmacologia , Rutênio/farmacologia , Raios UltravioletaRESUMO
OBJECTIVES: To develop a novel approach for local immunoprotection using CD4(+)CD25(high)CD127(-) T regulatory cells (Tregs) attached to the surface of the islets before transplantation. BACKGROUND: Tregs expanded ex vivo can control allo and autoreactivity, therefore, Treg-based therapy may offer more effective protection for transplanted islets from immunologic attack than currently used immunosuppression. Local application of Tregs can make such therapy more clinically feasible and efficient. METHODS: Human islets were isolated and coated with allogeneic ex vivo expanded Tregs using biotin-poly(ethylene glycol)-N-hydroxysuccinimide ester (biotin-PEG-NHS) and streptavidin as binding molecules. RESULTS: Coating pancreatic islets with Tregs did not affect islet viability (>90% fluorescein diacetate/propidium iodide) or the insulin secretion profile in dynamic islet perifusion assays. After in vitro incubation with allogeneic T effector cells, Treg-coated islets revealed preserved function with higher insulin secretion compared with controls-native islets, coated islets with T effector cells or when Tregs were added to the culture, but not attached to islets (P < 0.05). In addition, the Enzyme-linked immunosorbent spot (ELISPOT) assay revealed suppression of interferon (IFN)-γ secretion, when T effector cells were challenged with Treg-coated islets comparing to controls (99 ± 7 vs 151 ± 8 dots, respectively; P < 0.01). CONCLUSIONS: We demonstrated, for the first time, the ability to bind immune regulatory cells to target cells with preservation of their viability and function and protective activity against immune attack. If successfully tested in an animal model, local delivery of immunoprotective Tregs on the surface of transplanted pancreatic islets may be an alternative or improvement to the currently used immunosuppression.
Assuntos
Linfócitos T CD4-Positivos/imunologia , Terapia de Imunossupressão , Imunossupressores/uso terapêutico , Interferon gama/imunologia , Transplante das Ilhotas Pancreáticas/imunologia , Ilhotas Pancreáticas/imunologia , Linfócitos T Reguladores/imunologia , Tolerância ao Transplante , ELISPOT , Estudos de Viabilidade , Humanos , Terapia de Imunossupressão/métodos , Técnicas In Vitro , Interferon gama/efeitos dos fármacos , Tolerância ao Transplante/imunologiaRESUMO
One of the key challenges in engineering three-dimensional tissue constructs is the development of a mature microvascular network capable of supplying sufficient oxygen and nutrients to the tissue. Recent angiogenic therapeutic strategies have focused on vascularization of the constructed tissue, and its integration in vitro; these strategies typically combine regenerative cells, growth factors (GFs) with custom-designed biomaterials. However, the field needs to progress in the clinical translation of tissue engineering strategies. The article first presents a detailed description of the steps in neovascularization and the roles of extracellular matrix elements such as GFs in angiogenesis. It then delves into decellularization, cell, and GF-based strategies employed thus far for therapeutic angiogenesis, with a particularly detailed examination of different methods by which GFs are delivered in biomaterial scaffolds. Finally, interdisciplinary approaches involving advancement in biomaterials science and current state of technological development in fabrication techniques are critically evaluated, and a list of remaining challenges is presented that need to be solved for successful translation to the clinics.
RESUMO
In this study, we report the synthesis of single and dual-crosslinked anthracene-functional chitosan-based hydrogels in the absence of toxic initiators. Single crosslinking was achieved through dimerization of anthracene, whereas dual-crosslinked hydrogel was formed through dimerization of anthracene and free radical photopolymerization of methacrylated-chitosan in the presence of non-toxic initiator riboflavin, a well-known vitamin B2. Both single and dual-crosslinked hydrogels were found to be elastic, as was determined through rheological analysis. We observed that the dual-crosslinked hydrogels exhibited higher Young's modulus than the single-crosslinked hydrogels, where the modulus for single and dual-crosslinked hydrogels were measured as 9.2 ± 1.0 kPa and 26 ± 2.8 kPa, respectively resulting in significantly high volume of cells in dual-crosslinked hydrogel (2.2 × 107 µm3) compared to single-crosslinked (4.9 × 106 µm3). Furthermore, we investigated the cytotoxicity of both hydrogels towards 3T3-J2 fibroblast cells through CellTiter-Glo assay. Finally, immunofluorescence staining was carried out to evaluate the impact of hydrogel modulus on cell morphology. This study comprehensively presents functionalization of chitosan with anthracene, uses nontoxic initiator riboflavin, modulates the degree of crosslinking through dimerization of anthracene and free radical photopolymerization, and further modulates cell behavior through the alterations of hydrogel properties.
Assuntos
Antracenos/química , Quitosana/química , Riboflavina/química , Células 3T3 , Animais , Sobrevivência Celular , Módulo de Elasticidade , Hidrogéis , Camundongos , Polimerização , Alicerces Teciduais/químicaRESUMO
Islet transplantation has proved one of the most remarkable transmissions from an experimental curiosity into a routine clinical application for the treatment of type I diabetes (T1D). Current efforts for taking this technology one-step further are now focusing on overcoming islet donor shortage, engraftment, prolonged islet availability, post-transplant vascularization, and coming up with new strategies to eliminate lifelong immunosuppression. To this end, insulin secreting 3D cell clusters composed of different types of cells, also referred as heterocellular islet organoids, spheroids, or pseudoislets, have been engineered to overcome the challenges encountered by the current islet transplantation protocols. ß-cells or native islets are accompanied by helper cells, also referred to as accessory cells, to generate a cell cluster that is not only able to accurately secrete insulin in response to glucose, but also superior in terms of other key features (e.g. maintaining a vasculature, longer durability in vivo and not necessitating immunosuppression after transplantation). Over the past decade, numerous 3D cell culture techniques have been integrated to create an engineered heterocellular islet organoid that addresses current obstacles. Here, we first discuss the different cell types used to prepare heterocellular organoids for islet transplantation and their contribution to the organoids design. We then introduce various cell culture techniques that are incorporated to prepare a fully functional and insulin secreting organoids with select features. Finally, we discuss the challenges and present a future outlook for improving clinical outcomes of islet transplantation.
Assuntos
Diabetes Mellitus Tipo 1 , Células Secretoras de Insulina , Transplante das Ilhotas Pancreáticas , Ilhotas Pancreáticas , Humanos , Insulina , OrganoidesRESUMO
Emulsion-based generation of hydrogel particles has been widely explored for numerous applications in fields such as biomedical, food, and drug delivery. Water-in-water emulsion (w/w) is an organic solvent-free approach and exploits solely aqueous media to generate nano- or microparticles. This strategy is environment-friendly and favorable for biomedical applications where biocompatibility is the ultimate criterion. Hence, PEG-based microgels can be synthesized with desired size and functionality using w/w emulsion technique. To estimate the influence of emulsification parameters on size and stability of PEG-lipid microgels, optimizations using three independent input variables were carried out: (i) ultrasonication power, (ii) ultrasonication duration, and (iii) duration of light exposure. Physical immobilization of microgels on islet-organoids was achieved through hydrophobic interactions. Cell function and viability were assessed thoroughly after microgel immobilization. Microgel size is dependent on ultrasonication parameters and microgel stability is vastly determined by the duration of light exposure. Immobilization of microgels with 5â¯mM lipid moiety promoted coating of islet-organoids. Coated organoids retained their function and viability without significant adverse effects. This is important for understanding fundamental aspects of PEG-lipid microgels using w/w emulsion, useful for possible drug/gene delivery applications to increase treatment efficiency and ultimately lead to clinical translation of PEG microgels for biomedical applications.
Assuntos
Lipídeos/química , Microgéis/química , Organoides/química , Polietilenoglicóis/química , Tamanho da Partícula , Propriedades de Superfície , Água/químicaRESUMO
Glycan-based alginate hydrogels have great potential in creating new vehicles with responsive behavior and tunable properties for biomedicine. However, precise control and tunability in properties present major barrier for clinical translation of these materials. Here, we report the synthesis of pH responsive anthracene modified glycan-based hydrogels for selective release of therapeutic molecules. Hydrogels were crosslinked through simultaneous photopolymerization of vinyl groups and photodimerization of anthracene. Incorporation of anthracene into these gels leads to reversible control on crosslinking and transition between gel/sol states through dimerization/dedimerization of anthracene groups. Chemotherapeutic drug doxorubicin-loaded hydrogels were then tested in a cancer mimetic microenvironment where 85% of the drug was released from anthracene-conjugated hydrogels at pH 2 for 6 days. Control on gelation with anthracene incorporation was observed through alterations in modulus, where storage modulus was increased two-fold with anthracene conjugation during photopolymerization and photodimerization. Furthermore, cell survival analysis revealed that anthracene conjugation could selectively compromise cancer cell viability without inducing significant toxicity on healthy fibroblasts. This study combines light-induced control of crosslink density due to anthracene and pH-triggered therapeutics delivery with alginate. The approach would be applicable for systems where multiple control is required with high precision.
Assuntos
Alginatos/química , Portadores de Fármacos/química , Sistemas de Liberação de Medicamentos , Hidrogéis/química , Animais , Materiais Biocompatíveis , Sobrevivência Celular , Reagentes de Ligações Cruzadas , Portadores de Fármacos/síntese química , Liberação Controlada de Fármacos , Humanos , Concentração de Íons de Hidrogênio , Luz , Camundongos , Estrutura Molecular , Polimerização , Reologia , Análise EspectralRESUMO
Biohybrid microswimmers exploit the swimming and navigation of a motile microorganism to target and deliver cargo molecules in a wide range of biomedical applications. Medical biohybrid microswimmers suffer from low manufacturing yields, which would significantly limit their potential applications. In the present study, a biohybrid design strategy is reported, where a thin and soft uniform coating layer is noncovalently assembled around a motile microorganism. Chlamydomonas reinhardtii (a single-cell green alga) is used in the design as a biological model microorganism along with polymer-nanoparticle matrix as the synthetic component, reaching a manufacturing efficiency of ≈90%. Natural biopolymer chitosan is used as a binder to efficiently coat the cell wall of the microalgae with nanoparticles. The soft surface coating does not impair the viability and phototactic ability of the microalgae, and allows further engineering to accommodate biomedical cargo molecules. Furthermore, by conjugating the nanoparticles embedded in the thin coating with chemotherapeutic doxorubicin by a photocleavable linker, on-demand delivery of drugs to tumor cells is reported as a proof-of-concept biomedical demonstration. The high-throughput strategy can pave the way for the next-generation generation microrobotic swarms for future medical active cargo delivery tasks.
RESUMO
3D bioprinting of hydrogels has gained great attention due to its potential to manufacture intricate and customized scaffolds that provide favored conditions for cell proliferation. Nevertheless, plain natural hydrogels can be easily disintegrated, and their mechanical strengths are usually insufficient for printing process. Hence, composite hydrogels are developed for 3D printing. This study aims to develop a hydrogel ink for extrusion-based 3D printing which is entirely composed of natural polymers, gelatin, alginate, and cellulose. Physicochemical interactions between the components of the intertwined gelatin-cellulose-alginate network are studied via altering copolymer ratios. The structure of the materials and porosity are assessed using infrared spectroscopy, swelling, and degradation experiments. The utility of this approach is examined with two different crosslinking strategies using glutaraldehyde or CaCl2 . Multilayer cylindrical structures are successfully 3D printed, and their porous structure is confirmed by scanning electron microscopy and Brunauer-Emmett-Teller surface area analyses. Moreover, cytocompatibility of the hydrogel scaffolds is confirmed on fibroblast cells. The developed material is completely natural, biocompatible, economical, and the method is facile. Thus, this study is important for the development of advanced functional 3D hydrogels that have considerable potential for biomedical devices and artificial tissues.
Assuntos
Alginatos/química , Celulose/química , Gelatina/química , Hidrogéis/análise , Impressão Tridimensional , Animais , Sobrevivência Celular , Camundongos , Células NIH 3T3 , Reologia , SuínosRESUMO
An ultrafast and convenient method for PEGylation of chitosan nanoparticles has been established through a photopolymerization reaction between the acrylate groups of PEG and methacrylated-chitosan nanoparticles. The nanoparticle characteristics under physiological pH conditions were optimized through altered PEG chain length, concentration and duration of UV exposure. The method developed here has potential for clinical translation of chitosan nanoparticles. It also allows for the scalable and fast synthesis of nanoparticles with colloidal stability.