RESUMO
A method for the cascaded capillary assembly of different particle populations in a single assembly cycle is presented. The method addresses the increasing need for fast and simple fabrication of multicomponent arrays from colloidal micro- and nanoscale building blocks for constructing nanoelectronic, optical, and sensing devices. It is based on the use of a microfluidic device from which two independent capillary bridges extend. The menisci of the capillary bridges are pulled over a template with trapping sites that receive the colloidal particles. We describe the parameters for simultaneous, high-yield assembly from both menisci and demonstrate the applicability of the process by means of the size-selective assembly of particles of different diameters and also by the fabrication of two-component particle clusters with defined shape and composition. This approach allows the fabrication of multifunctional particle clusters having different functionalities at predetermined positions.
RESUMO
In this paper, a fast and inexpensive wafer-scale process for the fabrication of arrays of nanoscale holes in thin gold films for plasmonics is shown. The process combines nanosphere lithography using spin-coated polystyrene beads with a sputter-etching process. This allows the batch fabrication of several 1000 microm(2) large hole arrays in 200 nm thick gold films without the use of an adhesion layer for the gold film. The hole size and lattice period can be tuned independently with this method. This allows tuning of the optical properties of the hole arrays for the desired application. An example application, refractive index sensing, is demonstrated.