Long-Term Field Study of Microbial Community and Dechlorinating Activity Following Carboxymethyl Cellulose-Stabilized Nanoscale Zero-Valent Iron Injection.

Nanoscale zerovalent iron (nZVI) is an emerging technology for the remediation of contaminated sites. However, there are concerns related to the impact of nZVI on in situ microbial communities. In this study, the microbial community composition at a contaminated site was monitored over two years following the injection of nZVI stabilized with carboxymethyl cellulose (nZVI-CMC). Enhanced dechlorination of chlorinated ethenes to nontoxic ethene was observed long after the expected nZVI oxidation. The abundance of Dehalococcoides (Dhc) and vinyl chloride reductase (vcrA) genes, monitored using qPCR, increased by over an order of magnitude in nZVI-CMC-impacted wells. The entire microbial community was tracked using 16S rRNA gene amplicon pyrosequencing. Following nZVI-CMC injection, a clear shift in microbial community was observed, with most notable increases in the dechlorinating genera Dehalococcoides and Dehalogenimonas. This study suggests that coupled abiotic degradation (i.e., from reaction with nZVI) and biotic degradation fueled by CMC led to the long-term degradation of chlorinated ethenes at this field site. Furthermore, nZVI-CMC addition stimulated dehalogenator growth (e.g., Dehalococcoides) and biotic degradation of chlorinated ethenes.

Contributions of Abiotic and Biotic Dechlorination Following Carboxymethyl Cellulose Stabilized Nanoscale Zero Valent Iron Injection.

A pilot scale injection of nanoscale zerovalent iron (nZVI) stabilized with carboxymethyl cellulose (CMC) was performed at an active field site contaminated with a range of chlorinated volatile organic compounds (cVOC). The cVOC concentrations and microbial populations were monitored at the site before and after nZVI injection. The remedial injection successfully reduced parent compound concentrations on site. A period of abiotic degradation was followed by a period of enhanced biotic degradation. Results suggest that the nZVI/CMC injection created conditions that stimulated the native populations of organohalide-respiring microorganisms. The abundance of Dehalococcoides spp. immediately following the nZVI/CMC injection increased by 1 order of magnitude throughout the nZVI/CMC affected area relative to preinjection abundance. Distinctly higher cVOC degradation occurred as a result of the nZVI/CMC injection over a 3 week evaluation period when compared to control wells. This suggests that both abiotic and biotic degradation occurred following injection.

Characterization of nZVI mobility in a field scale test.

Nanoscale zerovalent iron (nZVI) particles were injected into a contaminated sandy subsurface area in Sarnia, Ontario. The nZVI was synthesized on site, creating a slurry of 1 g/L nanoparticles using the chemical precipitation method with sodium borohydride (NaBH4) as the reductant in the presence of 0.8% wt. sodium carboxymethylcellulose (CMC) polymer to form a stable suspension. Individual nZVI particles formed during synthesis had a transmission electron microscopy (TEM) quantified particle size of 86.0 nm and dynamic light scattering (DLS) quantified hydrodynamic diameter for the CMC and nZVI of 624.8 nm. The nZVI was delivered to the subsurface via gravity injection. Peak normalized total Fe breakthrough of 71% was observed 1m from the injection well and remained above 50% for the 24 h injection period. Samples collected from a monitoring well 1 m from the injection contained nanoparticles with TEM-measured particle diameter of 80.2 nm and hydrodynamic diameter of 562.9 nm. No morphological changes were discernible between the injected nanoparticles and nanoparticles recovered from the monitoring well. Energy dispersive X-ray spectroscopy (EDS) was used to confirm the elemental composition of the iron nanoparticles sampled from the downstream monitoring well, verifying the successful transport of nZVI particles. This study suggests that CMC stabilized nZVI can be transported at least 1 m to the contaminated source zone at significant Fe(0) concentrations for reaction with target contaminants.

A field-validated model for in situ transport of polymer-stabilized nZVI and implications for subsurface injection.

Nanoscale zerovalent iron (nZVI) particles have significant potential to remediate contaminated source zones. However, the transport of these particles through porous media is not well understood, especially at the field scale. This paper describes the simulation of a field injection of carboxylmethyl cellulose (CMC) stabilized nZVI using a 3D compositional simulator, modified to include colloidal filtration theory (CFT). The model includes composition dependent viscosity and spatially and temporally variable velocity, appropriate for the simulation of push-pull tests (PPTs) with CMC stabilized nZVI. Using only attachment efficiency as a fitting parameter, model results were in good agreement with field observations when spatially variable viscosity effects on collision efficiency were included in the transport modeling. This implies that CFT-modified transport equations can be used to simulate stabilized nZVI field transport. Model results show that an increase in solution viscosity, resulting from injection of CMC stabilized nZVI suspension, affects nZVI mobility by decreasing attachment as well as changing the hydraulics of the system. This effect is especially noticeable with intermittent pumping during PPTs. Results from this study suggest that careful consideration of nZVI suspension formulation is important for optimal delivery of nZVI which can be facilitated with the use of a compositional simulator.

Sulfidated nano zerovalent iron (S-nZVI) for in situ treatment of chlorinated solvents: A field study.

Sulfidated nano zerovalent iron (S-nZVI), stabilized with carboxymethyl cellulose (CMC), was successfully synthesized on site and injected into the subsurface at a site contaminated with a broad range of chlorinated volatile organic compounds (cVOCs). Transport of CMC-S-nZVI to the monitoring wells, both downgradient and upgradient, resulted in a significant decrease in concentrations of aqueous-phase cVOCs. Short-term (0-17 days) total boron and chloride measurements indicated dilution and displacement in these wells. Importantly however, compound specific isotope analysis (CSIA), changes in concentrations of intermediates, and increase in ethene concentrations confirmed dechlorination of cVOCs. Dissolution from the DNAPL pool into the aqueous phase at the deepest levels (4.0-4.5 m bgs) was identifiable from the increased cVOCs concentrations during long-term monitoring. However, at the uppermost levels (∼1.5 m above the source zone) a contrasting trend was observed indicating successful dechlorination. Changes in cVOCs concentrations and CSIA data suggest both sequential hydrogenolysis as well as reductive ß-elimination as the possible transformation mechanisms during the short-term abiotic and long-term biotic dechlorination. One of the most positive outcomes of this CMC-S-nZVI field treatment is the non-accumulation of lower chlorinated VOCs, particularly vinyl chloride. Post-treatment soil cores also revealed significant decreases in cVOCs concentrations throughout the targeted treatment zones. Results from this field study show that sulfidation is a suitable amendment for developing more efficient nZVI-based in situ remediation technologies.

Fate and transport of sulfidated nano zerovalent iron (S-nZVI): A field study.

Treatment of nano zerovalent iron (nZVI) with lower valent forms of sulfur compounds (sulfidation) has the potential to increase the selectivity and reactivity of nZVI with target contaminants and to decrease inter-particle aggregation for improving its mobility. These developments help in addressing some of the long-standing challenges associated with nZVI-based remediation treatments and are of great interest for in situ applications. Herein we report results from a field-scale project conducted at a contaminated site. Sulfidated nZVI (S-nZVI) was prepared on site by first synthesizing carboxymethyl cellulose (CMC) stabilized nZVI with sodium borohydride as a reductant and then sulfidating the nZVI suspension by adding sodium dithionite. Transmission electron microscopy (TEM) coupled with energy dispersive X-ray spectroscopy (EDS) of CMC-S-nZVI, from synthesis barrels, confirms the presence of both discrete spherical nZVI-like particles (∼90 nm) as well as larger irregular structures (∼500 nm) comprising of iron sulfides. This CMC-S-nZVI suspension was gravity fed into a sandy material and monitored through multiple multi-level monitoring wells. Samples collected from upstream and downstream wells suggest very good radial and vertical iron distribution. TEM-EDS analysis from the recovered well samples also indicates the presence of both nZVI-like particles as well as the larger flake-like structures, similar to those found in the injected CMC-S-nZVI suspension. This study shows that S-nZVI stabilized with CMC can be safely synthesized on site and is highly mobile and stable in the subsurface, demonstrating for the first time the field applicability of S-nZVI.

Impact of nZVI stability on mobility in porous media.

Nano-scale zero valent iron (nZVI) has received significant attention because of its potential to rapidly reduce a number of priority source zone contaminants. In order to effectively deliver nZVI to the source zone the nZVI particles must be stable. Previous laboratory studies have demonstrated the mobility of polymer modified suspensions of low concentration nZVI. More recently studies have shown potential for higher concentration nZVI suspensions to be transmitted through porous media. However, with increasing nZVI concentration aggregation is accelerated, reducing the available time for injection before nZVI settles. In this study the colloidal stability and mobility of nZVI concurrently synthesized and stabilized in the presence of carboxy-methyl-cellulose (CMC) are evaluated in one-dimensional column experiments. Low pore water velocity nZVI injections (4, 2, and 0.25 m/day) conducted over periods as long as 80 h with no mixing of the influent reservoir were used to investigate the effects of prolonged aggregation and settling of colloids on transport. A numerical simulator, based on colloid filtration theory, but accounting for particle aggregation and settling was used to evaluate the contributions of aggregation and settling on nZVI mobility. Results suggest that the prediction of nZVI sticking efficiency in column experiments becomes increasingly influenced by aggregation and settling in the influent reservoir as the period of injection increases. Consideration of nZVI stability is required for the prediction of nZVI mobility at the field scale and for the design of successful nZVI remediation plans.