Tissue diagnosis during colorectal cancer surgery using optical sensing: an in vivo study.

BACKGROUND: In colorectal cancer surgery there is a delicate balance between complete removal of the tumor and sparing as much healthy tissue as possible. Especially in rectal cancer, intraoperative tissue recognition could be of great benefit in preventing positive resection margins and sparing as much healthy tissue as possible. To better guide the surgeon, we evaluated the accuracy of diffuse reflectance spectroscopy (DRS) for tissue characterization during colorectal cancer surgery and determined the added value of DRS when compared to clinical judgement. METHODS: DRS spectra were obtained from fat, healthy colorectal wall and tumor tissue during colorectal cancer surgery and results were compared to histopathology examination of the measurement locations. All spectra were first normalized at 800 nm, thereafter two support vector machines (SVM) were trained using a tenfold cross-validation. With the first SVM fat was separated from healthy colorectal wall and tumor tissue, the second SVM distinguished healthy colorectal wall from tumor tissue. RESULTS: Patients were included based on preoperative imaging, indicating advanced local stage colorectal cancer. Based on the measurement results of 32 patients, the classification resulted in a mean accuracy for fat, healthy colorectal wall and tumor of 0.92, 0.89 and 0.95 respectively. If the classification threshold was adjusted such that no false negatives were allowed, the percentage of false positive measurement locations by DRS was 25% compared to 69% by clinical judgement. CONCLUSION: This study shows the potential of DRS for the use of tissue classification during colorectal cancer surgery. Especially the low false positive rate obtained for a false negative rate of zero shows the added value for the surgeons. Trail registration This trail was performed under approval from the internal review board committee (Dutch Trail Register NTR5315), registered on 04/13/2015, https://www.trialregister.nl/trial/5175 .

Return to work experiences of patients treated with stem cell transplantation for a hematologic malignancy.

PURPOSE: This qualitative study aimed to identify hematopoietic stem cell transplantation (HSCT) survivors' (1) work perceptions; (2) barriers to and facilitators of return to work (RTW); and (3) possible solutions to improve RTW. METHOD: Fifteen patients treated with HSCT 1-5 years ago participated in face-to-face semi-structured interviews. Interviews were analyzed following the steps of thematic content analyses. RESULTS: RTW was often characterized as a complex and prolonged trajectory, and it was frequently incomplete in working hours, tasks, and/or responsibilities. Work perceptions varied between patients; most valued work as positive, but some also reported a decline in work capacity and/or in importance. Perceived barriers included the duration and side effects of cancer treatment, the presence of comorbidity and poor health before diagnosis, having difficulties commuting and doing household tasks. Perceived facilitators were financial incentives, keeping in touch with the workplace, support of other patients and family, and looking after one's health. Proposed solutions to improve RTW included discussing RTW at the hospital, enhanced employer support, improved accessibility of rehabilitation programs, and more information about the consequences of being sick-listed. CONCLUSIONS: Many HSCT survivors value work as important and they are motivated to RTW. Insight in work perceptions, RTW barriers, and solutions might help researchers, healthcare professionals, and employers to develop and/or tailor individualized multidisciplinary care to facilitate RTW.

Effect of light intensity on behaviour, health and growth of growing-finishing pigs.

The effect of light intensity has been explored in relation to endocrine functions and reproduction in pigs, but effects on health and behaviour are scarcely documented. The objective of this study was to evaluate the effects of different light intensities on behaviour, health and growth of growing-finishing pigs. An experiment was conducted on a commercial farm equipped with light-emitting diode-based luminaires creating four light intensity treatments: low (45 lux), medium (198 lux), high (968 lux) and spatial gradient of intensity (from 71 lux to 330 lux). Per treatment, 112 pigs were studied in two batches of eight pens. Once every two weeks behaviours such as exploration, positive and negative social interactions, play and abnormal behaviours were observed. Health issues were assessed weekly and included biting lesions, skin lesions, leg and respiratory disorders. The average daily gain over the experiment was calculated and after slaughter carcasses were inspected. Generalised linear mixed models were used for the analysis of behaviours, binary health scores, carcass abnormalities, ordinal logistic regression for multilevel health scores, and linear mixed models for average daily gain. Interactions between intensity and week were found for some behaviours (i.e., exploration, negative social interactions and abnormal behaviour) and health issues (i.e., tear stains, conjunctivitis, body lesions, bursitis and tail lesions). However, none of the treatments consistently outperformed another one. Light treatments did not affect pig growth and carcass abnormalities. These variable results support studies suggesting that pigs are adaptable to light intensities, and inconsistencies over weeks might have been caused by environmental factors that could not be controlled in a commercial farm setting. To conclude, tested light intensities had no clear effects on pig behaviour, health and growth.

Design considerations for patient-specific bone fixation plates: a literature review.

In orthopedic surgery, patient-specific bone plates are used for fixation when conventional bone plates do not fit the specific anatomy of a patient. However, plate failure can occur due to a lack of properly established design parameters that support optimal biomechanical properties of the plate.This review provides an overview of design parameters and biomechanical properties of patient-specific bone plates, which can assist in the design of the optimal plate.A literature search was conducted through PubMed and Embase, resulting in the inclusion of 78 studies, comprising clinical studies using patient-specific bone plates for fracture fixation or experimental studies that evaluated biomechanical properties or design parameters of bone plates. Biomechanical properties of the plates, including elastic stiffness, yield strength, tensile strength, and Poisson's ratio are influenced by various factors, such as material properties, geometry, interface distance, fixation mechanism, screw pattern, working length and manufacturing techniques.Although variations within studies challenge direct translation of experimental results into clinical practice, this review serves as a useful reference guide to determine which parameters must be carefully considered during the design and manufacturing process to achieve the desired biomechanical properties of a plate for fixation of a specific type of fracture.

Near-infrared fluorescence angiography with indocyanine green for perfusion assessment of DIEP and msTRAM flaps: A Dutch multicenter randomized controlled trial.

Background: A common complication after a DIEP flap reconstruction is the occurrence of fat necrosis due to inadequate flap perfusion zones. Intraoperative identification of ischemic zones in the DIEP flap could be optimized using indocyanine green near-infrared fluorescence angiography (ICG-NIR-FA). This randomized controlled trial aims to determine whether intraoperative ICG-NIR-FA for the assessment of DIEP flap perfusion decreases the occurrence of fat necrosis. Design/methods: This article describes the protocol of a Dutch multicenter randomized controlled clinical trial: the FAFI-trial. Females who are electively scheduled for autologous breast reconstruction using DIEP or muscle-sparing transverse rectus abdominis muscle (msTRAM) flaps are included. A total of 280 patients will be included in a 1:1 ratio between both study arms. In the intervention arm, the intraoperative assessment of flap perfusion will be based on both regular clinical parameters and ICG-NIR-FA. The control arm consists of flap perfusion evaluation only through the regular clinical parameters, while ICG-NIR-FA images are obtained during surgery for which the surgeon is blinded. The main study endpoint is the difference in percentage of clinically relevant fat necrosis between both study arms, evaluated two weeks and three months after reconstruction. Conclusion: The FAFI-trial, a Dutch multicenter randomized controlled clinical trial, aims to investigate the clinical added value of intraoperative use of standardized ICG-NIR-FA for assessment of DIEP/msTRAM flap perfusion in the reduction of fat necrosis. Clinical trial registration number: NCT05507710; NL 68623.058.18.

Registration methods for surgical navigation of the mandible: a systematic review.

Image-to-patient registration in navigated mandibular surgery is complex due to the mobile nature of the mandible compared with other craniofacial bones. As a result, surgical navigation is rarely employed in the mandibular region. This systematic review provides an overview of the different registration methods that are used for surgical navigation of the mandible. A systematic search was performed in the MEDLINE Ovid, Scopus, and Embase databases on March 25, 2021. Search terms included synonyms for mandibular surgery, surgical navigation, and registration methods. Articles about navigated mandibular surgery, where the registration method was explicitly mentioned, were included. The database search yielded a total of 2952 articles, from which 81 articles remained for analysis. Four main registration methods were identified: point registration, surface registration, hybrid registration, and computer vision-based registration. The mobility of the mandible is accounted for by either keeping the mandible in a fixed position during preoperative imaging and surgery, or by tracking the mandibular movements. Although different registration methods are available for navigated mandibular surgery, there is always a trade-off between accuracy, registration time, usability, and invasiveness. Future studies should focus on testing the different methods in larger patient studies and should report the registration accuracy.

Assessment of the deep resection margin during oral cancer surgery: A systematic review.

The main challenge for radical resection in oral cancer surgery is to obtain adequate resection margins. Especially the deep margin, which can only be estimated based on palpation during surgery, is often reported inadequate. To increase the percentage of radical resections, there is a need for a quick, easy, minimal invasive method, which assesses the deep resection margin without interrupting or prolonging surgery. This systematic review provides an overview of technologies that are currently being studied with the aim of fulfilling this demand. A literature search was conducted through the databases Medline, Embase and the Cochrane Library. A total of 62 studies were included. The results were categorized according to the type of technique: 'Frozen Section Analysis', 'Fluorescence', 'Optical Imaging', 'Conventional imaging techniques', and 'Cytological assessment'. This systematic review gives for each technique an overview of the reported performance (accuracy, sensitivity, specificity, positive predictive value, negative predictive value, or a different outcome measure), acquisition time, and sampling depth. At the moment, the most prevailing technique remains frozen section analysis. In the search for other assessment methods to evaluate the deep resection margin, some technologies are very promising for future use when effectiveness has been shown in larger trials, e.g., fluorescence (real-time, sampling depth up to 6 mm) or optical techniques such as hyperspectral imaging (real-time, sampling depth few mm) for microscopic margin assessment and ultrasound (less than 10 min, sampling depth several cm) for assessment on a macroscopic scale.

Electromagnetic surgical navigation in patients undergoing mandibular surgery.

The purpose of this study was to evaluate the feasibility of electromagnetic (EM) navigation for guidance on osteotomies in patients undergoing oncologic mandibular surgery. Preoperatively, a 3D rendered model of the mandible was constructed from diagnostic computed tomography (CT) images. Cutting guides and patient specific reconstruction plates were designed and printed for intraoperative use. Intraoperative patient registration was performed using a cone beam CT scan (CBCT). The location of the mandible was tracked with an EM sensor fixated to the mandible. The real-time location of both the mandible and a pointer were displayed on the navigation system. Accuracy measurements were performed by pinpointing four anatomical landmarks and four landmarks on the cutting guide using the pointer on the patient and comparing these locations to the corresponding locations on the CBCT. Differences between actual and virtual locations were expressed as target registration error (TRE). The procedure was performed in eleven patients. TREs were 3.2 ± 1.1 mm and 2.6 ± 1.5 mm using anatomical landmarks and landmarks on the cutting guide, respectively. The navigation procedure added on average half an hour to the duration of the surgery. This is the first study that reports on the accuracy of EM navigation in patients undergoing mandibular surgery.

Evaluating the accuracy of resection planes in mandibular surgery using a preoperative, intraoperative, and postoperative approach.

In mandibular surgery, three-dimensionally printed patient-specific cutting guides are used to translate the preoperative virtually planned resection planes to the operating room. This study was performed to determine whether cutting guides are positioned according to the virtual plan and to compare the intraoperative position of the cutting guide with the resection performed. Nine patients were included. The exact positions of the resection planes were planned virtually and a patient-specific cutting guide was designed and printed. After surgical placement of the cutting guide, intraoperative cone beam computed tomography (CBCT) was performed. Postoperative CT was used to obtain the final resection planes. Distances and yaw and pitch angles between the preoperative, intraoperative, and postoperative resection planes were calculated. Cutting guides were positioned on the mandible with millimetre accuracy. Anterior osteotomies were performed more accurately than posterior osteotomies (intraoperatively positioned and final resection planes differed by 1.2±1.0mm, 4.9±6.6°, and 1.8±1.5°, respectively, and by 2.2±0.9mm, 9.3±9°, and 8.3±6.5° respectively). Differences between intraoperatively planned and final resection planes imply a directional freedom of the saw through the saw slots. Since cutting guides are positioned with millimetre accuracy compared to the virtual plan, the design of the saw slots in the cutting guides needs improvement to allow more accurate resections.

Ultrasound aids in intraoperative assessment of deep resection margins of squamous cell carcinoma of the tongue.

We wanted to find out whether ultrasound (US) can be used to assess the deep resection margins after excision of squamous cell carcinoma (SCC) of the tongue, as intraoperative feedback on their condition might help to prevent them being too close. Resected specimens of cancers of the tongue from 31 patients with SCC of the tongue were suspended in US gel and scanned with a small 5-10MHz US probe. The tumour was readily visible and US could differentiate it from muscle tissue. The margin of normal tongue musculature surrounding the tumour was measured on the US images, and the minimal resection margin was noted and compared with that reported by the histopathologist. The mean (SD) deep resection margins measured on the US images differed by 1.1 (0.9) mm from those reported by the histopathologist (Pearson's correlation coefficient: 0.79, p<0.01). The US measurements took a maximum of five minutes. It is feasible to use US to assess resection specimens of SCC of the tongue as an adjunct to existing strategies (such as frozen section analysis) to help achieve the desired deep surgical margins. The method is easy to incorporate into surgical routine as it does not take long.

Utilization of a 3D printed dental splint for registration during electromagnetically navigated mandibular surgery.

PURPOSE: A dental splint was developed for non-invasive rigid point-based registration in electromagnetically (EM) navigated mandibular surgery. Navigational accuracies of the dental splint were compared with the common approach, that is, using screws as landmarks. METHODS: A dental splint that includes reference registration notches was 3D printed. Different sets of three points were used for rigid point-based registration on a mandibular phantom: notches on the dental splint only, screws on the mandible, contralateral screws (the side of the mandible where the sensor is not fixated) and a combination of screws on the mandible and notches on the dental splint. The accuracy of each registration method was calculated using 45 notches at one side of the mandible and expressed as the target registration error (TRE). RESULTS: Average TREs of 0.83 mm (range 0.7-1.39 mm), 1.28 mm (1.03-1.7 mm), 2.62 mm (1.91-4.0 mm), and 1.34 mm (1.30-1.39 mm) were found, respectively, for point-based registration based on the splint only, screws on the mandible, screws on the contralateral side only, and screws combined with the splint. CONCLUSION: For dentate patients, rigid point-based registration performs best utilizing a dental splint with notches. The dental splint is easy to implement in the surgical, and navigational, workflow, and the notches can be pinpointed and designated on the CT scan with high accuracy. For edentate patients, screws can be used for rigid point-based registration. However, a new design of the screws is recommended to improve the accuracy of designation on the CT scan.

The oral cavity tumor thickness: Measurement accuracy and consequences for tumor staging.

INTRODUCTION: In the 8th edition of the AJCC/UICC cancer staging system (AJCC8), the depth of invasion (DOI) of the oral cavity tumor is the discriminative factor in tumor staging over the previously used greatest dimension (GD). In order to obtain a complete representation of how accurate we stage oral cavity cancer clinically, we evaluated the accuracy of measurements of the tumor dimensions on ultrasound (US) and magnetic resonance (MR) imaging by comparing this with the histopathology as the "golden standard". Secondly, we compared the pathological tumor staging of these tumors according to the AJCC7 and AJCC8, to evaluate the effect of the incorporation of the DOI in the AJCC8. MATERIALS AND METHODS: In a retrospective analysis, including 85 oral cavity tumors, the GD and tumor thickness (TT) measured on US and MR, were compared to histopathology with a Pearson correlation coefficient (R) and a Bland-Altman plot. The tumors were staged according to both the AJCC7 and AJCC8. RESULTS: TT was more reliably measured with US (R = 0.67, limits of agreement = 10.7 mm), whereas GD was more reliably measured with MR (R = 0.69, limits of agreement = 25.7 mm). The AJCC8 staging resulted into a higher tumor stage in 21% of the cases, compared to the AJCC7. CONCLUSION: For preoperative tumor staging, the TT is best estimated by the use of US. The incorporation of DOI in the AJCC8 can result in a higher tumor stage in more than twenty percent of the patients, with an associated worse prognosis for the patient.

Identification and classification of components in flash pyrolysis oil and hydrodeoxygenated oils by two-dimensional gas chromatography and time-of-flight mass spectrometry.

Hydrodeoxygenated pyrolysis oils (HDO) are considered promising renewable liquid energy carriers. To gain insights in the various reaction pathways taking place during the hydrodeoxygenation reaction of pyrolysis oil, two-dimensional gas chromatography with time-of-flight mass spectrometric analyses (2D-GC-TOF-MS) was applied on the feedstock and product oil. Chromatographic parameters like injection temperature and column choice of the 1D-(2)D ensemble are discussed. Fractionation of the oils by hexane extraction was applied to show the distribution of analytes over the phases. Some 1000 and 2000 components in the pyrolysis and HDO oil, respectively could be identified and classified. The TOF-MS detection considerably improved the understanding of the molecular distribution over the 1D-(2)D retention time fields in the contour plot, in order to classify the analytes in functional groups. By group-type classification of the main components (>0.3% relative area), it was possible to characterize the oils by 250 and 350 analytes, respectively pyrolysis oil and HDO oil, describing 75% of the chromatographable fraction. The 2D-GC-TOF-MS method showed to be a useful and fast technique to determine the composition of (upgraded) pyrolysis oil and is potentially a very useful tool for exploratory catalyst research and kinetic studies. The 2D-GC-TOF-MS technique is not only useful for the chemical study as such, but also provides the basic knowledge for method transfer to a 2D-GC-FID (flame ionization detector) application.

[Summary of the practice guideline 'Bacterial skin infections' (first revision) from the Dutch College of General Practitioners]. / Samenvatting van de standaard 'Bacteriële huidinfecties' (eerste herziening) van het Nederlands Huisartsen Genootschap.

The revised practice guideline 'Bacterial skin infections' developed by the Dutch College of General Practitioners replaces the previous practice guideline from 1998. Most bacterial skin infections can be diagnosed based on the patient history and clinical findings. Skin cultures and serologic analysis (in the case oferythema migrans) are not necessary. Exceptions are made for patients with bacterial skin infection and a high risk of MRSA involvement, or if nasal treatment is indicated for patients with recurring furunculosis. A superficial skin infection can be treated with local therapy. In case of a deep skin infection, oral antibiotics or surgical intervention is recommended. Antibiotic prophylaxis after a tick bite is not recommended. Erysipelas is considered a specific type of cellulitis and is treated as such.

[The practice guideline 'Atopic dermatitis' (first revision) from the Dutch College of General Practitioners: a response from the perspective of general practice]. / De standaard 'Constitutioneel eczeem' (eerste herziening) van het Nederlands Huisartsen Genootschap; reactie vanuit de huisartsgeneeskunde.

Atopic dermatitis is a chronic skin disease that is frequently encountered in general practice. The diagnostic criteria of Williams that the guideline recommends are clear. The reduced role of food-elimination procedures for infants is welcome, since there is little evidence for food allergy as a factor in atopic dermatitis. Rightfully so, the use of topical immunomodulators such as tacrolimus is not advised for general practitioners because of uncertainty about the long-term safety. The guideline provides clear instructions for the use of topical steroids. More severe forms of atopic dermatitis can safely be treated by pulse schemes and a step-down approach. In conclusion, the revised practice guideline offers general practitioners a practical and evidence-based tool for the management of atopic dermatitis.

Interventions for cutaneous molluscum contagiosum.

BACKGROUND: Molluscum contagiosum is a common skin infection, caused by a virus, which will usually resolve within months in people with a normal immune system. Many treatments have been promoted for molluscum contagiosum but a clear evidence base supporting them is lacking. OBJECTIVES: To assess the effects of management strategies (including waiting for natural resolution) for cutaneous, non-genital molluscum contagiosum in healthy people. SEARCH STRATEGY: We searched the Skin Group Specialised Register (March 2004), the Cochrane Central Register of Controlled Trials (2004, Issue 2), MEDLINE (from 1966 to March 2004), EMBASE (from 1980 to March 2004) and LILACS (from 1982 to March 2004) databases. We also searched reference lists and contacted pharmaceutical companies and experts in the field. SELECTION CRITERIA: Randomised controlled trials for treatment of molluscum contagiosum were investigated. Trials on sexually transmitted molluscum contagiosum and in people with lowered immunity (including those with HIV infection) were excluded. DATA COLLECTION AND ANALYSIS: Study selection and assessment of methodological quality were carried out by two independent authors. As similar comparisons between two interventions were not made in more than one study, statistical pooling was not performed. MAIN RESULTS: Five studies, with a total number of 137 participants, examined the effects of topical (three studies), systemic and homoeopathic interventions (one study each). Limited evidence was found for sodium nitrite co-applied with salicylic acid compared to salicylic acid alone (risk ratio (RR) 3.50, 95% confidence interval (CI) 1.23 to 9.92). No statistically significant differences were found for topical povidone iodine plus salicylic acid compared to povidone iodine alone (RR of cure 1.67, 95% CI 0.81 to 3.41) or compared to salicylic acid alone. Also no statistically significant differences were found for potassium hydroxide compared to placebo; systemic treatment with cimetidine versus placebo or systemic treatment with calcarea carbonica, a homoeopathic drug, versus placebo (RR 5.57, 95% CI 0.93 to 33.54). Study limitations included no blinding (two studies), many dropouts (three studies) and no intention-to-treat analysis (two studies); small study sizes may have led to important differences being missed. None of the evaluated treatment options were associated with serious adverse effects. AUTHORS' CONCLUSIONS: No single intervention has been shown to be convincingly effective in treating molluscum contagiosum.

Risk stratification for healthcare planning in women with gestational diabetes mellitus.

BACKGROUND: To identify relevant factors predicting the need for insulin therapy in women with gestational diabetes mellitus (GDM) and secondly to determine a potential 'low- risk' diet-treated group who are likely to have good pregnancy outcomes. METHODS: A retrospective analysis between 2011-2014. Multivariable backward stepwise logistic regression was used to identify the predictors of the need for insulin therapy. To identify a 'low-risk' diet-treated group, the group was stratified according to pregnancy complications. Diet-treated women with indications for induction in secondary care were excluded. RESULTS: A total of 820 GDM women were included, 360 (44%) women required additional insulin therapy. The factors predicting the need for insulin therapy were: previous GDM, family history of diabetes, a previous infant weighing ≥ 4500 gram, Middle-East/North-African descent, multiparity, pre-gestational BMI ≥ 30 kg/m2, and an increased fasting glucose level ≥ 5.5 mmol/l (OR 6.03;CI 3.56-10.22) and two-hour glucose level ≥ 9.4 mmol/l after a 75-gram oral glucose tolerance test at GDM diagnosis. In total 125 (54%) women treated with diet only had pregnancy complications. Primiparity and higher weight gain during pregnancy were the best predictors for complications (predictive probability 0.586 and 0.603). CONCLUSION: In this GDM population we found various relevant factors predicting the need for insulin therapy. A fasting glucose level ≥ 5.5 mmol/l at GDM diagnosis was by far the strongest predictor. Women with GDM who had good glycaemic control on diet only with a higher parity and less weight gain had a lower risk for pregnancy complications.

Indoor fire in a nursing home: evaluation of the medical response to a mass casualty incident based on a standardized protocol.

PURPOSE: This retrospective study reports the outcome of a mass casualty incident (MCI) caused by a fire in a nursing home. METHODS: Data from the medical charts and registration system of the Major Incident Hospital (MIH) and ambulance service were analyzed. The evaluation reports from the MIH and an independent research institute were used. The protocol for reports from major accidents and disaster was used to standardize the reporting [Lennquist, in Int J Disaster Med 1(1):79-86, 2003]. RESULTS: The emergency services were quickly at the scene. The different levels of pre-hospital management performed a tight coordination. However, miscommunication led to confusion in the registration and tracking of patients. In total, 49 persons needed medical treatment, 46 were treated in the MIH. Because of (possible) inhalation injury nine patients needed mechanical ventilation and nine patients were hospitalized to exclude delayed onset of pulmonary symptoms. No incident related deaths occurred. The intensive care unit of the MIH was initially understaffed despite the efforts of the automated calling system and switchboard operators. The handwritten registration of incoming staff was incomplete and should be performed digitally. Some staff members were unfamiliar with the MIH procedures. The medical chart appeared too extensive. Miscommunication between chain partners resulted in the delayed sharing of (semi) medical information. CONCLUSION: The different levels of incident managers performed a tight coordination. The MIH demonstrated its potency to provide emergency care for 46 patients and 9 intubated patients. No deaths or persistent disabilities occurred. Areas of improvement were recognized both in the pre-hospital as the hospital phase.

Automated determination of fatty acid methyl ester and cis/trans methyl ester composition of fats and oils.

The determination of the fatty acid composition (as methyl esters, FAMEs) of fats and oils and their cis/trans (CTME) distribution requires a simple, but manual and time-consuming sample preparation. The so-called BF3 method is often the preferred procedure. Because FAME/CTME analyses are encountered very frequently in the food industry, an automated, robot-based alternative is proposed which uses the sodium methylate procedure. After sample weighing and the (manual) addition of heptane (2 min), a XYZ robotic autosampler is used for all remaining work, which includes reagent addition, agitation, sample settling and the final injection into the gas chromatograph (10 min). The performance of the sodium methylate and BF3 methods are compared by analysing some 30 oil and fat samples. The novel procedure is much faster (less than 15 min versus ca. 1 h) and manual sample handling is drastically decreased. The experimental results obtained with the two methods frequently are the same, while small differences can be explained by (known) differences of the two methods in the conversion of minor oil/fat constituents, such as free fatty acids, wax esters and sterol esters. In case of FAME analyses, a hot injection is to be preferred over a cold injection. The RSDs of the peak areas were 1.5% for the major fatty acids to 11% for peaks that were just above the noise level. The detection limit were approximately 0.03%.

Molluscum contagiosum in Dutch general practice.

BACKGROUND: While molluscum contagiosum is considered to be a frequently encountered disease, few data on its incidence are known. AIM: The objective of this study was to describe the incidence of molluscum contagiosum in Dutch general practice and to assess the importance of venereal molluscum contagiosum. METHOD: Data were taken from the national survey of morbidity and interventions in general practice, drawn from 103 practices across the Netherlands, with a study population of 332300. RESULTS: The infection appeared to be common in childhood (cumulative incidence 17% in those aged under 15 years); the adult, sexually transmitted, form was rare. Incidence was higher between January and June than between July and December. Cases were unequally divided between recording practices, which is though to have been caused by the occurrence of small epidemics. CONCLUSION: The incidence of molluscum contagiosum in Dutch general practice was found to be 2.4 per 1000 person years. Molluscum contagiosum should still be considered as a mainly paediatric disease.