Field-effect silicon-plasmonic photodetector for coherent T-wave reception.

Plasmonic internal photoemission detectors (PIPED) have recently been shown to combine compact footprint and high bandwidth with monolithic co-integration into silicon photonic circuits, thereby opening an attractive route towards optoelectronic generation and detection of waveforms in the sub-THz and THz frequency range, so-called T-waves. In this paper, we further expand the PIPED concept by introducing a metal-oxide-semiconductor (MOS) interface with an additional gate electrode that allows to control the carrier dynamics in the device and the degree of internal photoemission at the metal-semiconductor interfaces. We experimentally study the behavior of dedicated field-effect (FE-)PIPED test structures and develop a physical understanding of the underlying principles. We find that the THz down-conversion efficiency of FE-PIPED can be significantly increased when applying a gate potential. Building upon the improved understanding of the device physics, we further perform simulations and show that the gate field increases the carrier density in the conductive channel below the gate oxide to the extent that the device dynamics are determined by ultra-fast dielectric relaxation rather than by the carrier transit time. In this regime, the bandwidth can be increased to more than 1 THz. We believe that our experiments open a new path towards understanding the principles of internal photoemission in plasmonic structures, leading to PIPED-based optoelectronic signal processing systems with unprecedented bandwidth and efficiency.

Fast high-precision distance metrology using a pair of modulator-generated dual-color frequency combs.

We demonstrate fast high-precision non-contact distance measurements to technical surfaces using a pair of dual-color electro-optic frequency combs for synthetic-wavelength interferometry (SWI). The dual-color combs are generated from continuous-wave (cw) lasers at 1300 nm and 1550 nm, which are jointly fed to a pair of high-speed dual-drive Mach-Zehnder modulators. The dual-color approach is used for continuous and dead-zone-free compensation of temperature-induced fiber drift. We achieve standard deviations below 2 µm at an acquisition time of 9.1 µs for measurements through 7 m of single-mode fiber. Despite the technical simplicity of our scheme, our concept can well compete with other comb-based distance metrology approaches, and it can maintain its accuracy even under industrial operating conditions. The viability of the concept is demonstrated by attaching the fiber-coupled sensor head to an industrial coordinate measuring machine for acquisition of surface profiles of various technical samples. Exploiting real-time signal processing along with continuous fiber drift compensation, we demonstrate the acquisition of point clouds of up to 5 million data points during continuous movement of the sensor head.

Coherent modulation up to 100 GBd 16QAM using silicon-organic hybrid (SOH) devices.

We demonstrate the generation of higher-order modulation formats using silicon-based inphase/quadrature (IQ) modulators at symbol rates of up to 100 GBd. Our devices exploit the advantages of silicon-organic hybrid (SOH) integration, which combines silicon-on-insulator waveguides with highly efficient organic electro-optic (EO) cladding materials to enable small drive voltages and sub-millimeter device lengths. In our experiments, we use an SOH IQ modulator with a π-voltage of 1.6 V to generate 100 GBd 16QAM signals. This is the first time that the 100 GBd mark is reached with an IQ modulator realized on a semiconductor substrate, leading to a single-polarization line rate of 400 Gbit/s. The peak-to-peak drive voltages amount to 1.5 Vpp, corresponding to an electrical energy dissipation in the modulator of only 25 fJ/bit.

Robust label-free biosensing using microdisk laser arrays with on-chip references.

Whispering-gallery mode (WGM) microdisk lasers show great potential for highly sensitive label-free detection in large-scale sensor arrays. However, when used in practical applications under normal ambient conditions, these devices suffer from temperature fluctuations and photobleaching. Here we demonstrate that these challenges can be overcome by a novel referencing scheme that allows for simultaneous compensation of temperature drift and photobleaching. The technique relies on reference structures protected by locally dispensed passivation materials, and can be scaled to extended arrays of hundreds of devices. We prove the viability of the concept in a series of experiments, demonstrating robust and sensitive label-free detection over a wide range of constant or continuously varying temperatures. To the best of our knowledge, these measurements represent the first demonstration of biosensing in active WGM devices with simultaneous compensation of both photobleaching and temperature drift.

Fast and reliable method to estimate losses of single-mode waveguides with an arbitrary 2D trajectory.

Photonic wire bonds, i.e., freeform waveguides written by 3D direct laser writing, emerge as a technology to connect different optical chips in fully integrated photonic devices. With the long-term vision of scaling up this technology to a large-scale fabrication process, the in situ optimization of the trajectory of photonic wire bonds is at stake. A prerequisite for the real-time optimization is the availability of a fast loss estimator for single-mode waveguides of arbitrary trajectory. Losses occur because of the bending of the waveguides and at transitions among sections of the waveguide with different curvatures. Here, we present an approach that resides on the fundamental mode approximation, i.e., the assumption that the photonic wire bonds predominantly carry their energy in a single mode. It allows us to predict in a quick and reliable way the pertinent losses from pre-computed modal properties of the waveguide, enabling fast design of optimum paths.

Silicon photonic integrated circuit for fast and precise dual-comb distance metrology.

We demonstrate an optical distance sensor integrated on a silicon photonic chip with a footprint of well below 1 mm2. The integrated system comprises a heterodyne receiver structure with tunable power splitting ratio and on-chip photodetectors. The functionality of the device is demonstrated in a synthetic-wavelength interferometry experiment using frequency combs as optical sources. We obtain accurate and fast distance measurements with an unambiguity range of 3.75 mm, a root-mean-square error of 3.4 µm and acquisition times of 14 µs.

Rotary scanning acquisition in ultra-low-field MRI.

PURPOSE: To develop a method of achieving large field of view (FOV) imaging with a smaller amount of data in ultra-low-field (ULF) MRI. THEORY: In rotary scanning acquisition (RSA), data from the imaging object is acquired at multiple angles by rotating the object or the scanner. RSA is similar to radial-trajectory acquisition but simplifies the measurement and image reconstruction when concomitant fields are nonnegligible. METHODS: RSA was implemented to achieve large FOV with only three localized superconductive quantum interference device (SQUID) sensors at the ULF-MRI field of 50 µT. RESULTS: Simulations suggest benefits of RSA, including reduced concomitant field artifacts, large FOV imaging, and SNR improvement. Experimental data demonstrate the feasibility of reconstructing large FOV images using only three SQUID sensors with 33% of the amount of data collected using a Cartesian trajectory. CONCLUSION: RSA can be useful in low-field, low-weight, or portable MRI to generate large FOV images with only a few sensors. Magn Reson Med 75:2255-2264, 2016. © 2015 Wiley Periodicals, Inc.

Integrated optical frequency shifter in silicon-organic hybrid (SOH) technology.

We demonstrate for the first time a waveguide-based frequency shifter on the silicon photonic platform using single-sideband modulation. The device is based on silicon-organic hybrid (SOH) electro-optic modulators, which combine conventional silicon-on-insulator waveguides with highly efficient electro-optic cladding materials. Using small-signal modulation, we demonstrate frequency shifts of up to 10 GHz. We further show large-signal modulation with optimized waveforms, enabling a conversion efficiency of -5.8 dB while suppressing spurious side-modes by more than 23 dB. In contrast to conventional acousto-optic frequency shifters, our devices lend themselves to large-scale integration on silicon substrates, while enabling frequency shifts that are several orders of magnitude larger than those demonstrated with all-silicon serrodyne devices.

Generation of 64 GBd 4ASK signals using a silicon-organic hybrid modulator at 80°C.

We demonstrate a silicon-organic hybrid (SOH) Mach-Zehnder modulator (MZM) generating four-level amplitude shift keying (4ASK) signals at symbol rates of up to 64 GBd both at room temperature and at an elevated temperature of 80°C. The measured line rate of 128 Gbit/s corresponds to the highest value demonstrated for silicon-based MZM so far. We report bit error ratios of 10-10 (64 GBd BPSK), 10-5 (36 GBd 4ASK), and 4 × 10-3 (64 GBd 4ASK) at room temperature. At 80 °C, the respective bit error ratios are 10-10, 10-4, and 1.3 × 10-2. The high-temperature experiments were performed in regular oxygen-rich ambient atmosphere.

Plasmonic-organic hybrid (POH) modulators for OOK and BPSK signaling at 40 Gbit/s.

We report on high-speed plasmonic-organic hybrid Mach-Zehnder modulators comprising ultra-compact phase shifters with lengths as small as 19 µm. Choosing an optimum phase shifter length of 29 µm, we demonstrate 40 Gbit/s on-off keying (OOK) modulation with direct detection and a BER < 6 × 10(-4). Furthermore, we report on a 29 µm long binary-phase shift keying (BPSK) modulator and show that it operates error-free (BER < 1 × 10(-10)) at data rates up to 40 Gbit/s and with an energy consumption of 70 fJ/bit.

Efficient concomitant and remanence field artifact reduction in ultra-low-field MRI using a frequency-space formulation.

PURPOSE: For ultra-low-field MRI, the spatial-encoding magnetic fields generated by gradient coils can have strong concomitant fields leading to prominent image distortion. Additionally, using superconducting magnet to pre-polarize magnetization can improve the signal-to-noise ratio of ultra-low-field MRI. Yet the spatially inhomogeneous remanence field due to the permanently trapped flux inside a superconducting pre-polarizing coil modulates magnetization and causes further image distortion. METHOD: We propose a two-stage frequency-space (f-x) formulation to accurately describe the dynamics of spatially-encoded magnetization under the influence of concomitant and remanence fields, which allows for correcting image distortion due to concomitant and remanence fields. RESULTS: Our method is computationally efficient as it uses a combination of the fast Fourier transform algorithm and a linear equation solver. With sufficiently dense discretization in solving the linear equation, the performance of this f-x method was found to be stable among different choices of the regularization parameter and the regularization matrix. CONCLUSION: We present this method together with numerical simulations and experimental data to demonstrate how concomitant and remanence field artifacts in ultra-low-field MRI can be corrected efficiently.

Full flex-grid asynchronous multiplexing demonstrated with Nyquist pulse-shaping.

We demonstrate full flex-grid operation with Nyquist frequency division multiplexing. The technique supports high spectral efficiency, asynchronous operation of channels, variable channel loading with different modulation formats and dynamic bandwidth allocation. Data from different sources with different bit and symbol rates are encoded onto electrical Nyquist pulses with different electrical subcarrier frequencies, and then transmitted optically. We give details on the transceiver design with digital signal processing and investigate the implementation penalty as a function of several design parameters such as limited filter length and effective number of bits. Finally, experiments are performed for receivers with direct detection, intradyne and remote heterodyne reception.

Timing, carrier frequency and phase recovery for OFDM and Nyquist signals using a mean modulus algorithm.

Efficient algorithms for timing, carrier frequency and phase recovery of Nyquist and OFDM signals are introduced and experimentally verified. The algorithms exploit the statistical properties of the received signals to efficiently derive the optimum sampling time, the carrier frequency offset, and the carrier phase. Among the proposed methods, the mean modulus algorithm (MMA) shows a very robust performance at reduced computational complexity. This is especially important for optical communications where data rates can exceed 100 Gbit/s per wavelength. All proposed algorithms are verified by simulations and by experiments using optical M-ary QAM Nyquist and OFDM signals with data rates up to 84 Gbit/s.

Amplification of advanced modulation formats with a semiconductor optical amplifier cascade.

The convergence of optical metro networks and access networks extends the area of network coverage, and therefore requires the use of optical amplifiers. For this purpose, semiconductor optical amplifiers (SOA) would be attractive, because they are broadband, can be centered between 1250 nm and 1600 nm, and because they are cheap in production and operation. We show that signals encoded with advanced modulation formats such as BPSK, QPSK, 8PSK, and 16QAM can be amplified by a cascade of at least four SOAs. This enables high-capacity paths with a capacity in the order of Tbit/s for converged metro-access networks.

Low-power silicon-organic hybrid (SOH) modulators for advanced modulation formats.

We demonstrate silicon-organic hybrid (SOH) electro-optic modulators that enable quadrature phase-shift keying (QPSK) and 16-state quadrature amplitude modulation (16QAM) with high signal quality and record-low energy consumption. SOH integration combines highly efficient electro-optic organic materials with conventional silicon-on-insulator (SOI) slot waveguides, and allows to overcome the intrinsic limitations of silicon as an optical integration platform. We demonstrate QPSK and 16QAM signaling at symbol rates of 28 GBd with peak-to-peak drive voltages of 0.6 V(pp). For the 16QAM experiment at 112 Gbit/s, we measure a bit-error ratio of 5.1 × 10⁻5 and a record-low energy consumption of only 19 fJ/bit.

Silicon-organic hybrid (SOH) frequency comb sources for terabit/s data transmission.

We demonstrate frequency comb sources based on silicon-organic hybrid (SOH) electro-optic modulators. Frequency combs with line spacings of 25 GHz and 40 GHz are generated, featuring flat-top spectra with less than 2 dB power variations over up to 7 lines. The combs are used for WDM data transmission at terabit/s data rates and distances of up to 300 km.

Real-time Nyquist signaling with dynamic precision and flexible non-integer oversampling.

We demonstrate two efficient processing techniques for Nyquist signals, namely computation of signals using dynamic precision as well as arbitrary rational oversampling factors. With these techniques along with massively parallel processing it becomes possible to generate and receive high data rate Nyquist signals with flexible symbol rates and bandwidths, a feature which is highly desirable for novel flexgrid networks. We achieved maximum bit rates of 252 Gbit/s in real-time.

Hybrid ultra-low-field MRI and magnetoencephalography system based on a commercial whole-head neuromagnetometer.

Ultra-low-field MRI uses microtesla fields for signal encoding and sensitive superconducting quantum interference devices for signal detection. Similarly, modern magnetoencephalography (MEG) systems use arrays comprising hundreds of superconducting quantum interference device channels to measure the magnetic field generated by neuronal activity. In this article, hybrid MEG-MRI instrumentation based on a commercial whole-head MEG device is described. The combination of ultra-low-field MRI and MEG in a single device is expected to significantly reduce coregistration errors between the two modalities, to simplify MEG analysis, and to improve MEG localization accuracy. The sensor solutions, MRI coils (including a superconducting polarizing coil), an optimized pulse sequence, and a reconstruction method suitable for hybrid MEG-MRI measurements are described. The performance of the device is demonstrated by presenting ultra-low-field-MR images and MEG recordings that are compared with data obtained with a 3T scanner and a commercial MEG device.

Noise amplification in parallel whole-head ultra-low-field magnetic resonance imaging using 306 detectors.

In ultra-low-field magnetic resonance imaging, arrays of up to hundreds of highly sensitive superconducting quantum interference devices (SQUIDs) can be used to detect the weak magnetic fields emitted by the precessing magnetization. Here, we investigate the noise amplification in sensitivity-encoded ultra-low-field MRI at various acceleration rates using a SQUID array consisting of 102 magnetometers, 102 gradiometers, or 306 magnetometers and gradiometers, to cover the whole head. Our results suggest that SQUID arrays consisting of 102 magnetometers and 102 gradiometers are similar in g-factor distribution. A SQUID array of 306 sensors (102 magnetometers and 204 gradiometers) only marginally improves the g-factor. Corroborating with previous studies, the g-factor in 2D sensitivity-encoded ultra-low-field MRI with 9 to 16-fold 2D accelerations using the SQUID array studied here may be acceptable.

Second-order nonlinear silicon-organic hybrid waveguides.

We describe a concept for second-order nonlinear optical processes in silicon photonics. A silicon-organic hybrid (SOH) double slot waveguide is dispersion-engineered for mode phase-matching (MPM). The proposed waveguide enables highly efficient nonlinear processes in the mid-IR range. With a cladding nonlinearity of χ(2) = 230 pm/V and 20 dBm pump power at a CW wavelength of 1550 nm, we predict a gain of 14.7 dB/cm for a 3100 nm signal. The suggested structure enables for the first time efficient second-order nonlinear optical mixing in silicon photonics with standard technology.