Bacterial community structure of aged oil sludge contaminated soil revealed by illumina high-throughput sequencing in East China.

Screening of the dominant or core oil resistant bacteria in Aged Oil Sludge (AOS) contaminated soil in Daqing and Shengli oilfields (DQ and SL) in China was investigated through High-Throughput Sequencing method. Enhanced total organic carbon (TOC, 12.53 to 28.35 g/kg in DQ and 3.07 to 4.97 g/kg in SL) and total petroleum hydrocarbons (TPHs, 21 to 2837 mg/mg in DQ and 13 to 1558 mg/kg in SL) were observed. The internal transcribed spacer (ITS) sequencing by Illumine Miseq platform at each taxonomic level revealed the notable toxicological effect of AOS on the diversity and community structure of bacteria. In this study, sequence analyses showed 77-89% and 92-98% reduction of Firmicutes at phylum level in DQ and SL respectively after treated with AOS. Enhanced universal gene location was observed in Proteobacteria, Actinobacteria, Gemmatimonadetes and Bacteroidetes in DQ and SL. The universal dominant family in the two oilfields was anaerolineaceae. At the genus level, Algiphilus in DQ and Pseudomonas in SL were the majority respectively. In total, 3 negligible genera (Perlucidibaca, Alcanivorax and Algiphilus) in DQ and 13 negligible genera (Salinisphaera, Microbulbifer and Idiomarina, et al.,) in SL were significantly enriched after oil treatment indicating their possible role in the attenuation of petroleum hydrocarbons.

Selective Separation of Acetic and Hexanoic Acids across Polymer Inclusion Membrane with Ionic Liquids as Carrier.

This paper first reports on the selective separation of volatile fatty acids (VFAs) (acetic and hexanoic acids) using polymer inclusion membranes (PIMs) containing quaternary ammonium and phosphonium ionic liquids (ILs) as the carrier. The affecting parameters such as IL content, VFA concentration, and the initial pH of the feed solution as well as the type and concentration of the stripping solution were investigated. PIMs performed a much higher selective separation performance toward hexanoic acid. The optimal PIM composed of 60 wt% quaternary ammonium IL with the permeability coefficients for acetic and hexanoic acid of 0.72 and 4.38 µm s-1, respectively, was determined. The purity of hexanoic acid obtained in the stripping solution increased with an increase in the VFA concentration of the feed solution and decreasing HCl concentration of the stripping solution. The use of Na2CO3 as the stripping solution and the involvement of the electrodialysis process could dramatically enhance the transport efficiency of both VFAs, but the separation efficiency decreased sharply. Furthermore, a coordinating mechanism containing hydrogen bonding and ion exchange for VFA transport was demonstrated. The highest purity of hexanoic acid (89.3%) in the stripping solution demonstrated that this PIM technology has good prospects for the separation and recovery of VFAs from aqueous solutions.

Effects of Aged Oil Sludge on Soil Physicochemical Properties and Fungal Diversity Revealed by High-Throughput Sequencing Analysis.

The oilfield soil was contaminated for years by large quantities of aged oil sludge generated in the petroleum industry. In this study, physicochemical properties, contents of main pollutants, and fungal diversity of the aged oil sludge-contaminated soil were analyzed. Results revealed that aged oil sludge significantly changed physical and chemical properties of the receiving soil and increased the contents of main pollutants (petroleum hydrocarbons and heavy metals) in soil. Meanwhile, the internal transcribed spacer (ITS) sequencing by Illumina Miseq platform at each taxonomic level demonstrated that the toxicological effect of oil pollutants obviously influenced the fungal diversity and community structure in soil. Moreover, it was found that the presence of three genera (Cephalotheca, Lecanicillium, and Septoriella) appeared in aged oil sludge-contaminated soil. And oil pollutants promoted the growth of certain genera in Ascomycota (70.83%) and Basidiomycota (10.78%), such as Venturia, Alternaria, and Piloderma. Nevertheless, the growth of Mortierella (9.16%), Emericella (6.02%), and Bjerkandera (0.00%) was intensively limited. This study would aid thorough understanding of microbial diversity in oil-contaminated soil and thus provide new point of view to soil bioremediation.

Soil Microbial Community Structure and Diversity around the Aging Oil Sludge in Yellow River Delta as Determined by High-Throughput Sequencing.

Microorganisms are sensitive indicators of edaphic environmental variation. The Illumina MiSeq sequencing technology was used to analyze soil bacterial community diversity around an aging oil sludge in the Yellow River Delta. The alpha diversity index of soil bacterial community results (Ace, Chao, Shannon, and Simpson) determined that bacterial community diversity sampling within the scope of a 20 cm radius from the center of an aging oil sludge spot showed the most abundant diversity. The level of diversity distributed symmetrically with radial direction from the center of the aging oil sludge spot. Over the distance of 100 m from the center, bacterial community diversity tends to be monotonous, with small differences especially in the horizontal direction underground. The alpha-diversity indicators also showed that the bacterial diversity of samples were close under the aging oil sludge. In addition, the aging oil sludge inhibited the growth of bacteria compared with the referenced unpolluted soil sample and also increased the diversities of soil bacteria. At the phylum level, the Proteobacteria, Chloroflexi, and Actinobacteria existing in the aging oil sludge-contaminated wetland soil constituted a larger proportion of the community, while the proportion of Firmicute was relatively less. On the contrary, Firmicute showed the highest content of 63.8% in the referenced soil. Under the genus level and family level, the corresponding strains that resisted the aging oil sludge were selected. According to the bacterial diversity analysis, the basic structure of the bacterial community which could be used for remediation of aging oil sludge-contaminated soil was also developed.

Biofuel cell based self-powered sensing platform for L-cysteine detection.

L-cysteine (L-Cys) detection is of great importance because of its crucial roles in physiological and clinical diagnoses. In this study, a glucose/O2 biofuel cell (BFC) was assembled by using flavin adenine dinucleotide-dependent glucose dehydrogenase (FAD-GDH)-based bioanode and laccase-based biocathode. Interestingly, the open circuit potential (OCP) of the BFC could be inhibited by Cu(2+) and subsequently activated by L-Cys, by which a BFC-based self-powered sensing platform for the detection of L-Cys was proposed. The FAD-GDH activity can be inhibited by Cu(2+) and, in turn, subsequent reversible activation by L-Cys because of the binding preference of L-Cys toward Cu(2+) by forming the Cu-S bond. The preferential interaction between L-Cys and Cu(2+) facilitated Cu(2+) to remove from the surface of the bioanode, and thus, the OCP of the system could be turned on. Under optimized conditions, the OCP of the BFC was systematically increased upon the addition of the L-Cys. The OCP increment (ΔOCP) was linear with the concentration of L-Cys within 20 nM to 3 µM. The proposed sensor exhibited lower detection limit of 10 nM L-Cys (S/N = 3), which is significantly lower than those values for other methods reported so far. Other amino acids and glutathione did not affect L-Cys detection. Therefore, this developed approach is sensitive, facile, cost-effective, and environmental-friendly, and could be very promising for the reliable clinically detecting of L-Cys. This work would trigger the interest of developing BFCs based self-powered sensors for practical applications.

Specific probe selection from landscape phage display library and its application in enzyme-linked immunosorbent assay of free prostate-specific antigen.

Probes against targets can be selected from the landscape phage library f8/8, displaying random octapeptides on the pVIII coat protein of the phage fd-tet and demonstrating many excellent features including multivalency, stability, and high structural homogeneity. Prostate-specific antigen (PSA) is usually determined by immunoassay, by which antibodies are frequently used as the specific probes. Herein we found that more advanced probes against free prostate-specific antigen (f-PSA) can be screened from the landscape phage library. Four phage monoclones were selected and identified by the specificity array. One phage clone displaying the fusion peptide ERNSVSPS showed good specificity and affinity to f-PSA and was used as a PSA capture probe in a sandwich enzyme-linked immunosorbent assay (ELISA) array. An anti-human PSA monoclonal antibody (anti-PSA mAb) was used to recognize the captured antigen, followed by horseradish peroxidase-conjugated antibody (HRP-IgG) and o-phenylenediamine, which were successively added to develop plate color. The ELISA conditions such as effect of blocking agent, coating buffer pH, phage concentration, antigen incubation time, and anti-PSA mAb dilution for phage ELISA were optimized. On the basis of the optimal phage ELISA conditions, the absorbance taken at 492 nm on a microplate reader was linear with f-PSA concentration within 0.825-165 ng/mL with a low limit of detection of 0.16 ng/mL. Thus, the landscape phage is an attractive biomolecular probe in bioanalysis.

Yeast surface displaying glucose oxidase as whole-cell biocatalyst: construction, characterization, and its electrochemical glucose sensing application.

The display of glucose oxidase (GOx) on yeast cell surface using a-agglutinin as an anchor motif was successfully developed. Both the immunochemical analysis and enzymatic assay showed that active GOx was efficiently expressed and translocated on the cell surface. Compared with conventional GOx, the yeast cell surface that displayed GOx (GOx-yeast) demonstrated excellent enzyme properties, such as good stability within a wide pH range (pH 3.5-11.5), good thermostability (retaining over 94.8% enzyme activity at 52 °C and 84.2% enzyme activity at 56 °C), and high d-glucose specificity. In addition, direct electrochemistry was achieved at a GOx-yeast/multiwalled-carbon-nanotube modified electrode, suggesting that the host cell of yeast did not have any adverse effect on the electrocatalytic property of the recombinant GOx. Thus, a novel electrochemical glucose biosensor based on this GOx-yeast was developed. The as-prepared biosensor was linear with the concentration of d-glucose within the range of 0.1-14 mM and a low detection limit of 0.05 mM (signal-to-noise ratio of S/N = 3). Moreover, the as-prepared biosensor is stable, specific, reproducible, simple, and cost-effective, which can be applicable for real sample detection. The proposed strategy to construct robust GOx-yeast may be applied to explore other oxidase-displaying-system-based whole-cell biocatalysts, which can find broad potential application in biosensors, bioenergy, and industrial catalysis.

Sensitive electrochemical sequential enzyme biosensor for glucose and starch based on glucoamylase- and glucose oxidase-controllably co-displayed yeast recombinant.

The sequential enzyme biosensors hold significant importance in measuring species which are usually hard to process with single-enzyme-based biosensors. However, sequential enzyme electrodes experience critical issues such as low catalytic efficiency, insensitivity and poor reproducibility. In this work, yeast surface co-displaying sequential enzymes of glucoamylase (GA) and glucose oxidase (GOx) with controllable ratios through the specific cohesion-dockerin protein interaction was explored, by which starch hydrolyzing by GA into glucose is the rate-limiting step. The modified electrodes were prepared by immobilizing yeast-GA&GOx whole-cell and reduced graphene oxide (RGO) on glassy carbon electrode (GCE), for which the direct electron transfer between the electrode and recombinant GOx was arrived. Interestingly, the current responses of sensors to starch and glucose are dependent on the displayed enzyme composition, of which the yeast-GA&GOx (2:1) exhibited the highest current. Thereafter, sequential enzyme sensor of yeast-GA&GOx (2:1)/RGO/GCE was developed. Based on reduction detection at negative potential without interference, the sensor is stable and capable of assaying glucose (linear range: 2.0-100 mg/L) or starch (linear range, 50-3500 mg/L), separately. Coupled with yeast-GOx/RGO/GCE glucose sensor, both glucose and starch in real samples can be detected satisfactorily. This work provides new ideas for the development of other sequential enzyme electrodes for potential applications.

Acidic medium synthesis of zeolites - an avenue to control the structure-directing power of organic templates.

This paper deals with the extension of the synthesis field of microporous zeolite-type materials and types of organic structure-directing agents (OSDA) that can be used to promote their crystallization. The highly hydrophilic hexamethylenetetramine (urotropine), with its C/N ratio = 1.5, which is unusual to act as a structure-directing agent in the crystallization of open-framework silica polymorphs, is used to exemplify the novelty of the employed approach. Namely, the protonation of urotropine in an acidic fluorine-containing medium transforms it into a very efficient OSDA that yields dodecasil 3C (MTN-type). This novel synthesis also allows gaining insights into OSDA-framework interactions in the MTN-type structure. The comprehensive 29Si and 19F MAS NMR indicate a small number of point defects of the framework T sites and the multiple bonding of F- ions to Si in a disordered manner. Based on this finding, a unit cell model has been generated using Monte Carlo simulation and validated with Rietveld refinement using experimental powder X-ray diffraction data. In the model, protonated urotropine cations are located in the center of the big hexakaidecahedral [51264] cages at full occupancy with random orientations. The charge balance is provided by the disordered F- ions.

Elevated volatile fatty acids production through reuse of acidogenic off-gases during electro-fermentation.

Electro-fermentation is gaining attention for its advantage in promoting product recovery and valorization of organic wastes. However, emission of by-product gases during acidogenic fermentation is one of the key reasons for reduced product recovery whereas high gas pressure in the acidogenic headspace could pose an inhibitory effect on the production of volatile fatty acids (VFAs). This study presents a novel electro-fermentation (EF) system for enhancing VFAs production by in situ reuse of anodic off-gases (mainly CO2 and H2) in the cathode. A total VFAs production of 0.57 g-VFAs/g-VS was achieved through reuse of acidogenic off-gases in EF system, corresponding to 48.70% increase in comparison with the treatment without off-gases reuse. Consequently, the conversion efficiency of carbon to VFAs was improved significantly by 13.92%. Acidogenic metabolic pathway in the anode shifted to mixed -acid fermentation with the succession of dominant microbes from genus of Escherichia in the seeding inocula to Bacteroides and Desulfovibrio in the anode and cathode chambers, respectively. This would provide a way to enhance VFAs recovery from organic wastes, which also contributes to reduced carbon footprint and increased environmental sustainability.

Combined effects of erythromycin and enrofloxacin on antioxidant enzymes and photosynthesis-related gene transcription in Chlorella vulgaris.

Multiple antibiotics are simultaneously detected in aquatic environment, so it is extremely important to study the combined effects of their mixtures. In this study, we investigated the toxic effects of erythromycin (ERY) and enrofloxacin (ENR), added individually or in combination, on Chlorella vulgaris and explored the toxic mechanisms. Results showed that the 96 h-EC50 values of ERY, ENR and ERY-ENR mixture to C. vulgaris were 85.7, 124.5 and 39.9 µg L-1 respectively, and combined toxicity assessment found that joint effect of the two antibiotics was synergism, which was proven by the chlorophyll content in algae. Antioxidant defense system and photosynthesis were involved in toxic mechanisms and the results revealed that both the activities of antioxidant enzymes, and the malondialdehyde (MDA) and glutathione (GSH) contents increased in antibiotic treatments. In addition, the increase was more significant in joint exposure treatment, which implied that the antioxidant defense system was synergistically affected. RT-PCR showed that ERY and ENR upregulated the transcript abundance of psaB, psbC and chlB at low concentrations and the transcription abundance was synergistically increased in combined treatment. Therefore, the risk of the toxicity of antibiotics to aquatic organisms in real environment both at organismal and molecular level increases as a result of their combined presence.

Sensitive detection of maltose and glucose based on dual enzyme-displayed bacteria electrochemical biosensor.

Glucoamylase-displayed bacteria (GA-bacteria) and glucose dehydrogenase-displayed bacteria (GDH-bacteria) were co-immobilized on multi-walled carbon nanotubes (MWNTs) modified glassy carbon electrode (GCE) to construct GA-bacteria/GDH-bacteria/MWNTs/GCE biosensor. The biosensor was developed by optimizing the loading amount and the ratio of GA-bacteria to GDH-bacteria. The as-prepared biosensor exhibited a wide dynamic range of 0.2-10mM and a low detection limit of 0.1mM maltose (S/N=3). The biosensor also had a linear response to glucose in the range of 0.1-2.0mM and a low detection limit of 0.04mM glucose (S/N=3). Interestingly, at the same concentration, glucose was 3.75-fold sensitive than that of maltose at the proposed biosensor. No interferences were observed for other possible mono- and disaccharides. The biosensor also demonstrated good long-term storage stability and repeatability. Further, using both GDH-bacteria/MWNTs/GCE biosensor and GA-bacteria/GDH-bacteria/MWNTs/GCE biosensor, glucose and maltose in real samples can be detected. Therefore, the proposed biosensor is capable of monitoring the food manufacturing and fermentation process.

A sensitive acetylcholinesterase biosensor based on gold nanorods modified electrode for detection of organophosphate pesticide.

A sensitive amperometric acetylcholinesterase (AChE) biosensor, based on gold nanorods (AuNRs), was developed for the detection of organophosphate pesticide. Compared with Au@Ag heterogeneous NRs, AuNRs exhibited excellent electrocatalytic properties, which can electrocatalytically oxidize thiocholine, the hydrolysate of acetylthiocholine chloride (ATCl) by AChE at +0.55V (vs. SCE). The AChE/AuNRs/GCE biosensor was fabricated on basis of the inhibition of AChE activity by organophosphate pesticide. The biosensor could detect paraoxon in the linear range from 1nM to 5µM and dimethoate in the linear range from 5nM to 1µM, respectively. The detection limits of paraoxon and dimethoate were 0.7nM and 3.9nM, which were lower than the reported AChE biosensor. The proposed biosensor could restore to over 95% of its original current, which demonstrated the good reactivation. Moreover, the biosensor can be applicable to real water sample measurement. Thus, the biosensor exhibited low applied potential, high sensitivity and good stability, providing a promising tool for analysis of pesticides.

Rational design of xylose dehydrogenase for improved thermostability and its application in development of efficient enzymatic biofuel cell.

In this paper, the construction of 3D model structure of xylose dehydrogenase (XDH) by using homology modeling to guide the rational design of the enzyme for improving thermostability was reported. Three XDH mutants of NA-1 (+249L), NA-2 (G149P) and NA-3 (+249L/G149P) were designed and displayed on the surface of bacteria. Among them, bacteria displaying NA-1 (NA-1-bacteria) exhibited superior thermostability without compromising its activity and substrate specificity in comparison with its wild-type counterpart. NA-1-bacteria retained its original activity after incubation at room temperature for one-month with the half-life of 9.8 days at 40°C. Finally, the NA-1-bacteria were applied to construct xylose/O2 based biofuel cell with good performance including enhanced operational stability. Thus, the approach described here could be explored for engineering of other enzymes for improving certain characters without three-dimensional structure identified by experimental methods.

Electrochemical Glucose Biosensor Based on Glucose Oxidase Displayed on Yeast Surface.

The conventional enzyme-based biosensor requires chemical or physical immobilization of purified enzymes on electrode surface, which often results in loss of enzyme activity and/or fractions immobilized over time. It is also costly. A major advantage of yeast surface display is that it enables the direct utilization of whole cell catalysts with eukaryote-produced proteins being displayed on the cell surface, providing an economic alternative to traditional production of purified enzymes. Herein, we describe the details of the display of glucose oxidase (GOx) on yeast cell surface and its application in the development of electrochemical glucose sensor. In order to achieve a direct electrochemistry of GOx, the entire cell catalyst (yeast-GOx) was immobilized together with multiwalled carbon nanotubes on the electrode, which allowed sensitive and selective glucose detection.

Au@Ag Heterogeneous Nanorods as Nanozyme Interfaces with Peroxidase-Like Activity and Their Application for One-Pot Analysis of Glucose at Nearly Neutral pH.

As substitutes for natural peroxidases, most nanomaterial-based enzyme mimetics (nanozymes) have unique properties such as high stability, low-cost, large surface area, and high catalytic activity. However, they usually work in acidic conditions and thus impede their real applications. In this work, by modulating the nanostructure, composition, and surface property of the bimetallic materials, the positively charged poly(diallyldimethylammonium)-stabilized Au@Ag heterogeneous nanorods (NRs) were developed as synergistic peroxidase-like interfaces, which exhibited high activity over a wide pH range (pH 4.0-6.5) using 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) diammonium salt (ABTS) as the chromogenic substrate. At pH 6.5, the peroxidase-like activity for the Au@Ag heterogeneous NRs was stable and optimal within 20-40 °C. Moreover, the Au@Ag heterogeneous NRs showed excellent temperature stability and long-term storage stability. Given these characters, the detection of H2O2 at pH 6.5 was proposed on the basis of the Au@Ag heterogeneous NRs catalyzing the colorimetric reaction of H2O2 and ABTS, where the oxidized ABTS showed a typical absorption peak at 414 nm. The absorbance at 414 nm was linear with H2O2 concentration from 0.01 to 10 mM. Further, considering that Au@Ag heterogeneous NRs and glucose oxidase (GOx) have similar optimal pH for catalytic activities, a novel one-pot method for the detection of glucose was developed by the coupled catalytic reaction using GOx, Au@Ag heterogeneous NRs, and ABTS at nearly neutral pH (pH 6.5) and 37 °C. This proposed method had simple and rapid processes, wide linear range (0.05-20 mM), and reliability for the successful analysis of real samples. On the basis of these attractive and unique characteristics, Au@Ag heterogeneous NRs can become promising substitutes for peroxidase in analytical chemistry and environmental science.

Amperometric L-glutamate biosensor based on bacterial cell-surface displayed glutamate dehydrogenase.

A novel L-glutamate biosensor was fabricated using bacteria surface-displayed glutamate dehydrogenase (Gldh-bacteria). Here the cofactor NADP(+)-specific dependent Gldh was expressed on the surface of Escherichia coli using N-terminal region of ice nucleation protein (INP) as the anchoring motif. The cell fractionation assay and SDS-PAGE analysis indicated that the majority of INP-Gldh fusion proteins were located on the surface of cells. The biosensor was fabricated by successively casting polyethyleneimine (PEI)-dispersed multi-walled carbon nanotubes (MWNTs), Gldh-bacteria and Nafion onto the glassy carbon electrode (Nafion/Gldh-bacteria/PEI-MWNTs/GCE). The MWNTs could not only significantly lower the oxidation overpotential towards NAPDH, which was the product of NADP(+) involving in the oxidation of glutamate by Gldh, but also enhanced the current response. Under the optimized experimental conditions, the current-time curve of the Nafion/Gldh-bacteria/PEI-MWNTs/GCE was performed at +0.52 V (vs. SCE) by amperometry varying glutamate concentration. The current response was linear with glutamate concentration in two ranges (10 µM-1 mM and 2-10 mM). The low limit of detection was estimated to be 2 µM glutamate (S/N=3). Moreover, the proposed biosensor is stable, specific, reproducible and simple, which can be applied to real samples detection.

Bacterial cell-surface displaying of thermo-tolerant glutamate dehydrogenase and its application in L-glutamate assay.

In this paper, glutamate dehydrogenase (Gldh) is reported to efficiently display on Escherichia coli cell surface by using N-terminal region of ice the nucleation protein as an anchoring motif. The presence of Gldh was confirmed by SDS-PAGE and enzyme activity assay. Gldh was detected mainly in the outer membrane fraction, suggesting that the Gldh was displayed on the bacterial cell surface. The optimal temperature and pH for the bacteria cell-surface displayed Gldh (bacteria-Gldh) were 70°C and 9.0, respectively. Additionally, the fusion protein retained almost 100% of its initial enzymatic activity after 1 month incubation at 4°C. Transition metal ions could inhibit the enzyme activity to different extents, while common anions had little adverse effect on enzyme activity. Importantly, the displayed Gldh is most specific to l-glutamate reported so far. The bacterial Gldh was enabled to catalyze oxidization of l-glutamate with NADP(+) as cofactor, and the resultant NADPH can be detected spectrometrically at 340nm. The bacterial-Gldh based l-glutamate assay was established, where the absorbance at 340nm increased linearly with the increasing l-glutamate concentration within the range of 10-400µM. Further, the proposed approach was successfully applied to measure l-glutamate in real samples.

Co-immobilization of glucoamylase and glucose oxidase for electrochemical sequential enzyme electrode for starch biosensor and biofuel cell.

A novel electrochemical sequential biosensor was constructed by co-immobilizing glucoamylase (GA) and glucose oxidase (GOD) on the multi-walled carbon nanotubes (MWNTs)-modified glassy carbon electrode (GCE) by chemical crosslinking method, where glutaraldehyde and bovine serum albumin was used as crosslinking and blocking agent, respectively. The proposed biosensor (GA/GOD/MWNTs/GCE) is capable of determining starch without using extra sensors such as Clark-type oxygen sensor or H2O2 sensor. The current linearly decreased with the increasing concentration of starch ranging from 0.005% to 0.7% (w/w) with the limit of detection of 0.003% (w/w) starch. The as-fabricated sequential biosensor can be applicable to the detection of the content of starch in real samples, which are in good accordance with traditional Fehling's titration. Finally, a stable starch/O2 biofuel cell was assembled using the GA/GOD/MWNTs/GCE as bioanode and laccase/MWNTs/GCE as biocathode, which exhibited open circuit voltage of ca. 0.53 V and the maximum power density of 8.15 µW cm(-2) at 0.31 V, comparable with the other glucose/O2 based biofuel cells reported recently. Therefore, the proposed biosensor exhibited attractive features such as good stability in weak acidic buffer, good operational stability, wide linear range and capable of determination of starch in real samples as well as optimal bioanode for the biofuel cell.

Simultaneously improving stability and specificity of cell surface displayed glucose dehydrogenase mutants to construct whole-cell biocatalyst for glucose biosensor application.

The improved stability and substrate specificity of cell surface displayed glucose dehydrogenase (GDH) mutants by replacing four amino acids from Bacillus subtilis by using site-directed mutagenesis was systematically investigated. A series of mutated GDHs including E170R/Q252L, V149K/E170R/Q252L, E170R/Q252L/G259A and V149K/E170R/Q252L/G259A, were fused to the ice nucleation protein for displaying on cell surface of Eschericia coli. Q252L/E170R/V149K, Q252L/E170R/G259A and Q252L/E170R/V149K/G259A variants were found stable at a wide pH range and shown excellent thermostability. Especially, the Q252L/E170R/V149K/G259A mutant showed half-life of ~3.8days at 70 °C. Q252L/E170R/V149K/G259A variant exhibited the narrowest substrate specificity for d-glucose. The whole cell displayed GDH mutant could be cultured in a large scale with excellent enzyme activity and productivity. In addition, a sensitive and stable electrochemical glucose biosensor can be prepared using the GDH-mutant bacteria modified electrode. Thus, the whole cell biocatalysts are promising candidates for exploitation in a wide range of industrial applications.