Sickle-shaped high gain and low profile based four port MIMO antenna for 5G and aeronautical mobile communication.

The construction of the four-port MIMO antenna in the form of a sickle is provided in the article. Initially, the single port element is designed and optimized. Next, a structure with two ports is created, and lastly, a design with four ports is completed. This process is repeated until the design is optimized. Three types of parametric analysis are considered, including variations in length, widths of sickle-shaped patches, and varying sizes of DGS. The frequency range of 2-8 GHz is used for structural investigation. The - 18.77 dB of return loss was observed at 3.825 GHz for a single-element structure. The optimized one-port structure provides a return loss of - 19.79 dB at 3.825 GHz. The port design offers a bandwidth of 0.71 GHz (3.515-4.225). The four-port design represents two bands that are observed at 3 GHz and 5.43 GHz. Both bands provide the return loss at respectively - 19.79 dB and - 20.53 dB with bandwidths of 1.375 GHz (2.14-3.515) and 0.25 GHz (5.335-5.585). The healthy isolation among both transmittance and reflectance response is achieved. The low-profile material was used to create the design that was presented. The article includes a comparison of the findings that were measured and those that were simulated. The four-port design that has been shown offers a total gain of 15.93 dB, a peak co-polar value of 5.46 dB, a minimum return loss of - 20.53 dB, a peak field distribution of 46.43 A/m and a maximum bandwidth of 1.375 GHz. The values for all diversity parameters like ECC are near zero, the Negative value of TARC, Near to zero MEG, DG is almost 10 dB, and a zero value of CCL is achieved. All diversity parameter performance is within the allowable range. The design is well suited for 5G and aeronautical mobile communication applications.

Design and Fabrication of a Low-Cost, Multiband and High Gain Square Tooth-Enabled Metamaterial Superstrate Microstrip Patch Antenna.

The manuscript represents a novel square tooth-enabled superstrate metamaterial loaded microstrip patch antenna for the multiple frequency band operation. The proposed tooth-based metamaterial antenna provides better gain and directivity. Four antenna structures are numerically investigated for the different geometry of the patch and tooth. These proposed structures are simulated, fabricated, measured, and compared for the frequency range of 3 GHz to 9 GHz. The electrical equivalent model of the split-ring resonator is also analyzed in the manuscript. The comparative analysis of all of the proposed structures has been carried out, in terms of several bands, reflectance response, VSWR, gain and bandwidth. The results are compared with previously published works. The effects are simulated using a high-frequency structure simulator tool with the finite element method. The measured and fabricated results are compared for verification purposes. The proposed structure provides seven bands of operation and 8.57 dB of gain. It is observed that the proposed design offers the multiple frequency band operation with a good gain. The proposed tooth-based metamaterial antenna suits applications, such as the surveillance radar, satellite communication, weather monitoring and many other wireless devices.

A Novel Design of Complementary Split Ring Resonator Metamaterial-Based Low-Profile MIMO Antenna with Defected Ground Structure for S/C/X/Ka Band Applications.

The article represents the design of two port-based printed MIMO antenna structures that have the advantages of low profile, simple structure, good isolation, peak gain, directive gain, and reflection coefficient. The performance characteristics are observed for the four design structures by cropping the patch region, loading the slits near the hexagonal-shaped patch, and adding and removing the slots in the ground area. The antenna provides a least reflection coefficient of -39.44 dB, a maximum electric field of patch region of 33.3 V/cm, a total gain of 5.23 dB, and good values of total active reflection coefficient and diversity gain. The proposed design provides nine bands' response, a peak bandwidth of 2.54 GHz, and a peak bandwidth of 26.127 dB. The four proposed structures are fabricated using a low-profile material to support mass production. The comparison among simulated and fabricated structures is included to check the authenticity of the work. The performance assessment of the proposed design with other published articles is carried out for the performance observation. The suggested technique is analyzed over the wideband of frequency region 1 GHz to 14 GHz. The multiple band responses make the proposed work suitable for wireless applications in S/C/X/Ka bands.

Design and Fabrication of Compact, Multiband, High Gain, High Isolation, Metamaterial-Based MIMO Antennas for Wireless Communication Systems.

We proposed a novel approach based on a complementary split-ring resonator metamaterial in a two-port MIMO antenna, giving high gain, multiband results with miniature size. We have also analyzed a circular disk metasurface design. The designs are also defected using ground structure by reducing the width of the ground plane to 8 mm and etching all other parts of the ground plane. The electric length of the proposed design is 0.5λ × 0.35λ × 0.02λ. The design results are also investigated for a different variation of complementary split-ring resonator ring sizes. The inner and outer ring diameters are varied to find the optimized solution for enhanced output performance parameters. Good isolation is also achieved for both bands. The gain and directivity results are also presented. The results are compared for isolation, gain, structure size, and the number of ports. The compact, multiband, high gain and high isolation design can apply to WiMAX, WLAN, and satellite communication applications.

Studies of Performance of Cs2TiI6-XBrX (Where x = 0 to 6)-Based Mixed Halide Perovskite Solar Cell with CdS Electron Transport Layer.

The present research work represents the numerical study of the device performance of a lead-free Cs2TiI6-XBrX-based mixed halide perovskite solar cell (PSC), where x = 1 to 5. The open circuit voltage (VOC) and short circuit current (JSC) in a generic TCO/electron transport layer (ETL)/absorbing layer/hole transfer layer (HTL) structure are the key parameters for analyzing the device performance. The entire simulation was conducted by a SCAPS-1D (solar cell capacitance simulator- one dimensional) simulator. An alternative FTO/CdS/Cs2TiI6-XBrX/CuSCN/Ag solar cell architecture has been used and resulted in an optimized absorbing layer thickness at 0.5 µm thickness for the Cs2TiBr6, Cs2TiI1Br5, Cs2TiI2Br4, Cs2TiI3Br3 and Cs2TiI4Br2 absorbing materials and at 1.0 µm and 0.4 µm thickness for the Cs2TiI5Br1 and Cs2TiI6 absorbing materials. The device temperature was optimized at 40 °C for the Cs2TiBr6, Cs2TiI1Br5 and Cs2TiI2Br4 absorbing layers and at 20 °C for the Cs2TiI3Br3, Cs2TiI4Br2, Cs2TiI5Br1 and Cs2TiI6 absorbing layers. The defect density was optimized at 1010 (cm-3) for all the active layers.

Investigations on Stub-Based UWB-MIMO Antennas to Enhance Isolation Using Characteristic Mode Analysis.

In this article, very compact 2 × 2 and 4 × 4 MIMO (Multiple-Input and Multiple output) antennas are designed with the help of Characteristics Mode Analysis to enhance isolation between the elements for UWB applications. The proposed antennas are designed with Characteristic Mode Analysis (CMA) to gain physical insight and also to analyze the dominant mode. To improve isolation and minimize the mutual coupling between radiating elements, elliptical shaped stubs are used. The dimensions of the 2 × 2 and 4 × 4 MIMO antennas are 0.29λ0 × 0.21λ0 (28 × 20 mm2) and 0.29λ0 × 0.42λ0 (28 × 40 mm2), respectively. These antennas cover the (3.1 GHz-13.75 GHz) UWB frequency band and maintain remarkable isolation of more than 25 dB for both 2 × 2 and 4 × 4 antennas. The impedance bandwidth of the proposed 4 × 4 MIMO antenna is 126.40% from 3.1 GHz to 13.75 GHz, including X-Band and ITU bands. The proposed 4 × 4 antenna has good radiation efficiency, with a value of more than 92.5%. The envelope correlation coefficient (ECC), diversity gain (DG), mean effective gain (MEG), and channel capacity loss (CCL) matrices of the 4 × 4 antenna are simulated and tested. The corresponding values are 0.0045, 9.982, -3.1 dB, and 0.39, respectively. The simulated results are validated with measured results and favorable agreements for both the 2 × 2 and 4 × 4 UWB-MIMO antennas.