RESUMO
Porphyrins, phycobilins, and their proteins have abundant π-electrons and strongly absorb visible light, some of which bind a metal ion in the center. Because of the structural and optical properties, they not only play critical roles as an essential component in natural systems but also have attracted much attention as a high value specialty chemical in various fields, including renewable energy, cosmetics, medicines, and foods. However, their commercial application seems to be still limited because the market price of porphyrins and phycobilins is generally expensive to apply them easily. Furthermore, their petroleum-based chemical synthesis is energy-intensive and emits a pollutant. Recently, to replace petroleum-based production, many studies on the bioproduction of metalloporphyrins, including Zn-porphyrin, Co-porphyrin, and heme, porphyrin derivatives including chlorophyll, biliverdin, and phycobilins, and their proteins including hemoproteins, phycobiliproteins, and phytochromes from renewable carbon sources using microbial cell factories have been reported. This review outlines recent advances in the bioproduction of porphyrins, phycobilins, and their proteins using microbial cell factories developed by various microbial biotechnology techniques, provides well-organized information on metabolic regulations of the porphyrin metabolism, and then critically discusses challenges and future perspectives. Through these, it is expected to be able to achieve possible solutions and insights and to develop an outstanding platform to be applied to the industry in future research.
Assuntos
Metaloporfirinas , Petróleo , Porfirinas , Ficobilinas , Engenharia MetabólicaRESUMO
BACKGROUND: Isopropanol is widely used as a biofuel and a disinfectant. Chemical preparation of isopropanol destroys the environment, which makes biological preparation of isopropanol necessary. Previous studies focused on the use of expensive glucose as raw material. Therefore, the microbial cell factory that ferments isopropanol with cheap raw materials will provide a greener way to produce isopropanol. RESULTS: This study converted crude glycerol into isopropanol using Y. lipolytica. As a microbial factory, the active natural lipid and fatty acid synthesis pathway endows Y. lipolytica with high malonyl-CoA production capacity. Acetoacetyl-CoA synthase (nphT7) and isopropanol synthesis genes are integrated into the Y. lipolytica genome. The nphT7 gene uses the accumulated malonyl-CoA to synthesize acetoacetyl-CoA, which increases isopropanol production. After medium optimization, the best glycerol medium was found and resulted in a 4.47-fold increase in isopropanol production. Fermenter cultivation with pure glycerol medium resulted in a maximum isopropanol production of 1.94 g/L. In a crude glycerol fermenter, 1.60 g/L isopropanol was obtained, 82.53% of that achieved with pure glycerol. The engineered Y. lipolytica in this study has the highest isopropanol titer reported. CONCLUSIONS: The engineered Y. lipolytica successfully produced isopropanol by using crude glycerol as a cheap carbon source. This is the first study demonstrating the use of Y. lipolytica as a cell factory to produce isopropanol. In addition, this is also a new attempt to accumulate lipid synthesis precursors to synthesize other useful chemicals by integrating exogenous genes in Y. lipolytica.
Assuntos
Yarrowia , 2-Propanol/metabolismo , Coenzima A/metabolismo , Ácidos Graxos/metabolismo , Glicerol/metabolismo , Engenharia Metabólica , Yarrowia/genética , Yarrowia/metabolismoRESUMO
Recently, heme has attracted much attention as a main ingredient that mimics meat flavor in artificial meat in the food industry. Here, we developed Corynebacterium glutamicum capable of high-yield production of heme with systems metabolic engineering and modification of membrane surface. The combination of two precursor pathways based on thermodynamic information increased carbon flux toward heme and porphyrin intermediate biosynthesis. The co-overexpression of genes involved in a noncanonical downstream pathway and the gene encoding the transcriptional regulator DtxR significantly enhanced heme production. The overexpression of the putative heme exporters, knockout of heme-binding proteins, modification of the cell wall by chemical treatment, and reduction of intermediate UP III substantially improved heme secretion. The fed-batch fermentation showed a maximum heme titer of 309.18 ± 16.43 mg l-1, including secreted heme of 242.95 ± 11.45 mg l-1, a yield on glucose of 0.61 mmol mol-1, and productivity of 6.44 mg l-1h-1, which are the highest values reported to date. These results demonstrate that engineered C. glutamicum can be an attractive cell factory for animal-free heme production.
Assuntos
Corynebacterium glutamicum , Corynebacterium glutamicum/genética , Fermentação , Heme , Carne , Engenharia MetabólicaRESUMO
A novel maltose-forming α-amylase (PSMA) was recently found in the hyperthermophilic archaeon Pyrococcus sp. ST04. This enzyme shows <13% amino-acid sequence identity to other known α-amylases and displays a unique enzymatic property in that it hydrolyzes both α-1,4-glucosidic and α-1,6-glucosidic linkages of substrates, recognizing only maltose units, in an exo-type manner. Here, the crystal structure of PSMA at a resolution of 1.8â Å is reported, showing a tight ring-shaped tetramer with monomers composed of two domains: an N-domain (amino acids 1-341) with a typical GH57 family (ß/α)7-barrel fold and a C-domain (amino acids 342-597) composed of α-helical bundles. A small closed cavity observed in proximity to the catalytic residues Glu153 and Asp253 at the domain interface has the appropriate volume and geometry to bind a maltose unit, accounting for the selective exo-type maltose hydrolysis of the enzyme. A narrow gate at the putative subsite +1 formed by residue Phe218 and Phe452 is essential for specific cleavage of glucosidic bonds. The closed cavity at the active site is connected to a short substrate-binding channel that extends to the central hole of the tetramer, exhibiting a geometry that is significantly different from classical maltogenic amylases or ß-amylases. The structural features of this novel exo-type maltose-forming α-amylase provide a molecular basis for its unique enzymatic characteristics and for its potential use in industrial applications and protein engineering.
Assuntos
Amilases/metabolismo , Maltose/metabolismo , Pyrococcus/enzimologia , Amilases/química , Amilases/genética , Domínio Catalítico , Modelos Moleculares , Mutagênese Sítio-Dirigida , Conformação Proteica , Proteólise , Especificidade por SubstratoRESUMO
Phycocyanobilin, an algae-originated light-harvesting pigment known for its antioxidant properties, has gained attention as it plays important roles in the food and medication industries and has surged in demand owing to its low-yield extraction from natural resources. In this study, engineered Corynebacterium glutamicum was developed to achieve high PCB production, and three strategies were proposed: reinforcement of the heme biosynthesis pathway with the introduction of two PCB-related enzymes, strengthening of the pentose phosphate pathway to generate an efficient cycle of NADPH, and fed-batch fermentation to maximize PCB production. Each approach increased PCB synthesis, and the final engineered strain successfully produced 78.19 mg/L in a flask and 259.63 mg/L in a 5 L bioreactor, representing the highest bacterial production of PCB reported to date, to our knowledge. The strategies applied in this study will be useful for the synthesis of PCB derivatives and can be applied in the food and pharmaceutical industries.
Assuntos
Corynebacterium glutamicum , Engenharia Metabólica , Ficobilinas , Ficocianina , Corynebacterium glutamicum/metabolismo , Corynebacterium glutamicum/genética , Ficocianina/metabolismo , Ficocianina/genética , Ficobilinas/metabolismo , Ficobilinas/genética , Fermentação , Proteínas de Bactérias/genética , Proteínas de Bactérias/metabolismo , Via de Pentose Fosfato/genética , Reatores Biológicos/microbiologiaRESUMO
Isopropanol, a well-known biofuel, is a widely used precursor for chemical products that can replace nonrenewable petroleum energy. Here, engineered Corynebacterium glutamicum that can effectively utilize all xylose and glucose in agricultural waste rice straw to produce isopropanol was described. First, codon mutations were introduced into transporters and glycolytic-related genes to decrease the glucose preference of C. glutamicum. A more energetically favorable xylose oxidative pathway was constructed that replaced traditional xylose isomerization pathways, saving twice the number of enzymatic steps. A succinate auxiliary module was incorporated into the tricarboxylic acid cycle (TCA), connecting the xylose-utilized pathway with the isopropanol pathway to maximize xylose orientation towards the product. The final engineered strain successfully consumed 100 % of the xylose from NaOH-pretreated, enzyme-hydrolyzed rice straw and effectively synthesized 4.91 g/L isopropanol. This study showcases the successful conversion of agricultural waste into renewable energy, unveiling new possibilities for advancing biological fermentation technology.
Assuntos
Corynebacterium glutamicum , Oryza , Xilose/metabolismo , Corynebacterium glutamicum/genética , Corynebacterium glutamicum/metabolismo , Oryza/metabolismo , 2-Propanol , Biomassa , Glucose/metabolismo , Engenharia Metabólica , FermentaçãoRESUMO
Fungi-degrading artificial amylosomes were newly developed consisting of fungi-degrading enzyme (NAG), starch-degrading enzymes and a scaffold protein. Amylosome scaffolds containing starch-binding proteins (SbpCbpA and CCSbpCbpA) were highly bound to starch and fungal-spoiled food waste. Amylosomes showed an average of 1.43-fold higher reducing sugar production from starch. 2.00-fold α-amylase in amylosomes increased reducing sugar production from amylose by an average of 1.50-fold. At 70°C for 6 hours, SbpCbpA and CCSbpCbpA maintained an average activity of 56.42% compared to the control (38.37%). The enzyme mixture and amylosomes with NAG showed an average 1.31-fold increase in glucose production in response to fungal-spoiled food waste compared to samples without NAG; in particular, CCSbpCbpA with NAG produced 62.44 ± 0.03 mM glucose (2.55-fold of the enzyme mixture without NAG). This research strategy can be applicable to the starch and fungal-spoiled food waste saccharification in an ecofriendly manner, leading to sugar production in industrial fields.
RESUMO
A novel whole cell biocatalyst using fungal-pretreated lignocellulosic biomass was developed by displaying the enzyme complex consisting of N-acetylglucosaminidase (cNAG) and endoglucanse E (cCelE) on Corynebacterium glutamicum, hereafter called mNC. mNC showed a maximum 4.43-fold cNAG and 2.40-fold cCelE activity compared to single enzyme-secreting C. glutamicum. mNC also showed the highest efficiency of sugar production in various types of cellulose and fungal-pretreated biomass. The growth of mNC was 5.06-fold higher than that of the control. Then, the ability of mNC to produce a valuable chemical was confirmed. mNC overexpressing isopropanol biosynthesis genes showed a maximum titer of 218.9 ± 11.73 mg/L isopropanol and maintained high efficiency for isopropanol production in the recycling test, which was 90.07 ± 4.12 % during 4 cycles. This strategy can be applied to the direct saccharification of fungal-pretreated lignocellulosic biomass efficiently leading to the production of valuable products in various industrial fields.
Assuntos
Corynebacterium glutamicum , 2-Propanol , Biomassa , Corynebacterium glutamicum/metabolismo , Lignina/metabolismo , Complexos Multienzimáticos/metabolismoRESUMO
Poly(ethylene terephthalate) (PET) is synthesized via a rich ester bond between terephthalate (TPA) and ethylene glycol (EG). Because of this, PET degradation takes a long time and PET accumulates in the environment. Many studies have been conducted to improve PET degrading enzyme to increase the efficiency of PET depolymerization. However, enzymatic PET decomposition is still restricted, making upcycling and recycling difficult. Here, we report a novel PET degrading complex composed of Ideonella sakaiensis PETase and Candida antarctica lipase B (CALB) that improves degradability, binding ability and enzyme stability. The reaction mechanism of chimeric PETase (cPETase) and chimeric CALB (cCALB) was confirmed by PET and bis (2-hydroxyethyl terephthalate) (BHET). cPETase generated BHET and mono (2-hydroxyethyl terephthalate (MHET) and cCALB produced terephthalate (TPA). Carbohydrate binding module 3 (CBM3) in the scaffolding protein greatly improved PET film binding affinity. Finally, the final enzyme complex demonstrated a 6.5-fold and 8.0-fold increase in the efficiency of hydrolysis from PET with either high crystalline or waste to TPA than single enzymes, respectively. This complex could effectively break down waste PET while maintaining enzyme stability and would be applied for biological upcycling of TPA.
Assuntos
Ácidos Ftálicos , Polietilenotereftalatos , Etilenos , Ácidos Ftálicos/metabolismo , Plásticos/metabolismo , Polietilenotereftalatos/químicaRESUMO
Isopropanol is a commodity chemical widely used as a biofuel, fuel additive, rubbing alcohol and intermediate in various fields. Here, an engineered Corynebacterium glutamicum overproducing isopropanol was developed. To our knowledge, despite a representative industrial host to produce valuable chemicals, the high-level production of isopropanol in C. glutamicum has never been reported. First, the problem of the inability to produce isopropanol was solved by finding a key factor in its metabolism. The consolidation and modular optimization of synthetic bypasses including succinate and mevalonate bypasses enhanced isopropanol production. Flux redistribution of central metabolism significantly directed the carbon flux toward isopropanol biosynthesis. The final engineered strain produced 10.25 ± 1.12 g/L isopropanol in two-stage fed-batch fermentation with an optimized gas stripping, which is the highest titer, yield and productivity in C. glutamicum. These strategies could be useful for the high-level production of isopropanol in C. glutamicum.
Assuntos
Corynebacterium glutamicum , 2-Propanol , Corynebacterium glutamicum/metabolismo , Fermentação , Engenharia Metabólica , Ácido Succínico/metabolismoRESUMO
Metabolic engineering of non-photosynthetic microorganisms to increase the utilization of CO2 has been focused on as a green strategy to convert CO2 into valuable products such as fatty acids. In this study, a CO2 utilization pathway involving carbonic anhydrase and biotin carboxylase was formed to recycle CO2 in the oleaginous yeast Yarrowia lipolytica, thereby increasing the production of fatty acids. In the recombinant strain in which the CO2 utilization pathway was introduced, the production of fatty acids was 10.7 g/L, which was 1.5-fold higher than that of the wild-type strain. The resulting strain had a 1.4-fold increase in dry cell mass compared to the wild-type strain. In addition, linoleic acid was 47.7% in the fatty acid composition of the final strain, which was increased by 11.6% compared to the wild-type strain. These results can be applied as an essential technology for developing efficient and eco-friendly processes by directly utilizing CO2.
Assuntos
Yarrowia , Dióxido de Carbono , Ácidos Graxos , Engenharia Metabólica , Yarrowia/genéticaRESUMO
Marine macroalgae are potential renewable feedstocks for valuable biomaterials. Among them, alginate is a primary component in brown algae that can be nonenzymatically converted and enzymatically degraded by alginate lyases to 4-deoxy-l-erythro-5-hexoseulose uronic acid (DEH). Here, we constructed alginolytic enzyme complexes comprising two different alginate lyases for synergistic alginate degradation. The complexes showed good thermostability with 60% of the residual activity at high temperature (60 °C). Furthermore, they produced 0.85 and 0.18 mg/mL DEH from alginate and natural brown algae as substrates, respectively. The enzyme complex successfully decomposed brown algal biomass, resulting in a 3.15-fold improvement in DEH when compared to free enzymes. The Ralstonia eutropha strain with alginolytic enzyme complexes on the cell surface showed higher Polyhydroxybutyrate (PHB) production and produced 2.58 g/L PHB from alginate. After the use of alginate, remaining biomass such as fucoidan and laminaran can also be used in the future for high value ingredients in nutritional, medical device, skincare and dermatological products. These results demonstrate that it is possible to create more efficient strategies for producing biodegradable PHB and functional polysaccharides from brown algal substrates.
Assuntos
Butiratos/metabolismo , Cupriavidus necator/metabolismo , Phaeophyceae/química , Alginatos , Estabilidade Enzimática , Cinética , Polissacarídeo-Liases/metabolismo , Especificidade por Substrato , TemperaturaRESUMO
Cellulosomes are scaffold proteins displaying enzymes on the cell wall to efficiently obtain nutrient sources. CcGlcNAcase is a novel cellulosomal component. Based on sequence analysis, CcGlcNAcase was predicted to be a chitinolytic enzyme based on high homology with the discoidin domain-containing protein and chitobiase/ ß-hexosaminidase C terminal domain. CcGlcNAcase expression was notably increased when chitin was present. CcGlcNAcase produced N-acetyl-d-glucosamine from various lengths of N-acetyl-d-glucosamine. CcGlcNAcase bound to chitin (89%) and fungi (54.10%), whereas CcGlcNAcase exhibited a low binding ability to cellulose and xylan. CcGlcNAcase hydrolyzed fungi, yielding maximum 3.90 g/L N-acetyl-d-glucosamine. CcGlcNAcase enhanced cellulase toward fungi-infected lignocellulosic biomass, yielding 18 mg/L glucose (1.32-fold) and 1.72-fold increased total reducing sugar levels, whereas cellulase alone produced 13 mg/L glucose. Taken together, CcGlcNAcase can be utilized to enhance the degradation of fungi-infected lignocellulosic biomass and exhibits potential applications in the wood and sugar industry.
Assuntos
Acetilglucosaminidase , Açúcares , Biomassa , Fungos , LigninaRESUMO
This study reports the draft genome of Amorphotheca resinae KUC30009, a fungal isolate with promising industrial-scale melanin production potential. The mechanisms for melanin or melanin-related pigment formation of this strain were examined through bioinformatic and biochemical strategies. The 30.11 Mb genome of A. resinae contains 9638 predicted genes. Genomic-based discovery analyses identified 14 biosynthetic gene clusters (BGCs) associated with secondary metabolite production. Moreover, genes encoding a specific type 1 polyketide synthase and 4-hydroxynaphthalene reductase were identified and predicted to produce intermediate metabolites of dihydroxy naphthalene (DHN)-melanin biosynthesis pathway, but not to DHN-melanin. These findings were further supported by the detection of increased flaviolin concentrations in mycelia and almost unchanged morphologies of the culture grown with tricyclazole. Apart from this, the formation of melanin in the culture filtrate appeared to depend on the laccase-like activity of multi-copper oxidases. Simultaneously, concentrations of nitrogen-containing sources decreased when the melanin formed in the media. Interestingly, melanin formation in the culture fluid was proportional to laccase-like activity. Based on these findings, we proposed novel strategies for the enhancement of melanin production in culture filtrates. Therefore, our study established a theoretical and methodological basis for synthesizing pigments from fungal isolates using genomic- and biochemical-based approaches.
RESUMO
BACKGROUND: Biliverdin, a prospective recyclable antioxidant and one of the most important precursors for optogenetics, has received growing attention. Biliverdin is currently produced by oxidation of bilirubin from mammalian bile using chemicals. However, unsustainable procedures of extraction, chemical oxidation, and isomer separation have prompted bio-based production using a microbial cell factory. RESULTS: In vitro thermodynamic analysis was performed to show potential candidates of bottleneck enzymes in the pathway to produce biliverdin. Among the candidates, hemA and hemL were overexpressed in Corynebacterium glutamicum to produce heme, precursor of biliverdin. To increase precursor supply, we suggested a novel hemQ-mediated coproporphyrin dependent pathway rather than noted hemN-mediated protoporphyrin dependent pathway in C. glutamicum. After securing precursors, hmuO was overexpressed to pull the carbon flow to produce biliverdin. Through modular optimization using gene rearrangements of hemA, hemL, hemQ, and hmuO, engineered C. glutamicum BV004 produced 11.38 ± 0.47 mg/L of biliverdin at flask scale. Fed-batch fermentations performed in 5 L bioreactor with minimal medium using glucose as a sole carbon source resulted in the accumulation of 68.74 ± 4.97 mg/L of biliverdin, the highest titer to date to the best of our knowledge. CONCLUSIONS: We developed an eco-friendly microbial cell factory to produce biliverdin using C. glutamicum as a biosystem. Moreover, we suggested that C. glutamicum has the thermodynamically favorable coproporphyrin dependent pathway. This study indicated that C. glutamicum can work as a powerful platform to produce biliverdin as well as heme-related products based on the rational design with in vitro thermodynamic analysis.
RESUMO
To extract As bound to amorphous and crystalline iron oxides, this study proposed simultaneous application of oxalic acid and dithionite, which was observed to induce synergistic effect and accomplish effective extraction of As bound to both iron oxides. However, the formation of arsenic sulfide decreased overall removal of As because the insoluble precipitate form of As remained as a residual fraction of As in soil. Therefore, stepwise addition of dithionite in the simultaneous application was applied to minimize the formation of secondary minerals and maximize the As extraction. As a result, 74% of As bound to amorphous iron oxides and 65% of As bound to crystalline iron oxides were removed. More importantly, the stepwise application of oxalic acid and dithionite was effective to reduce the bioaccessible concentration of As in the treated soil. Therefore, the proposed application could reduce the potential risk of contaminated soil to human health by extraction-based remedial action.
RESUMO
Urea was thermally degraded to be transformed into graphitic carbon nitride (g-C3N4), and the fabricated charring compound was aimed to use a photocatalyst for the simultaneous removal of Orange G (OG) and trivalent arsenic (As(III)) through photocatalytic oxidation. This study experimentally revealed that the degradation of OG substantially restricted the oxidation performance for As(III). To mitigate the unwanted inhibition arising from the decomposition of OG, persulfate (PS) was intentionally added, which synergistically expedited the reaction kinetics for governing the oxidation performance for both OG and As(III). Hydroxyl radicals formed in the presence of g-C3N4 become a driving force for PS to expedited sulfate radicals, which substantially increased the oxidation of OG and As(III). The intrinsic structure of g-C3N4 enhancing the photocatalytic stability guaranteed the re-usability of the photocatalyst. For instance, the fabricated photocatalyst in this study exhibited the same oxidation performance at least three times. Despite the intrinsic charring compound (i.e., high porosity), this study reported that the synthesized catalyst did not adsorb As species, therefore, the further treatment is required to remove the oxidized As. Thus, all experimental findings suggest that g-C3N4 derived from urea and PS could synergistically co-oxidize azo dye compound and As(III) from the aqueous phase.
Assuntos
Arsênio/química , Compostos Azo/química , Grafite/química , Nitrilas/química , Fotoquímica , Sulfatos/química , Ureia/química , Catálise , Luz , Oxirredução , FotóliseRESUMO
Zn-porphyrin is a promising organic photosensitizer in various fields including solar cells, interface and biomedical research, but the biosynthesis study has been limited, probably due to the difficulty of understanding complex biosynthesis pathways. In this study, we developed a Corynebacterium glutamicum platform strain for the biosynthesis of Zn-coproporphyrin III (Zn-CP III), in which the heme biosynthesis pathway was efficiently upregulated. The pathway was activated and reinforced by strong promoter-induced expression of hemAM (encoding mutated glutamyl-tRNA reductase) and hemL (encoding glutamate-1-semialdehyde aminotransferase) genes. This engineered strain produced 33.54 ± 3.44 mg/l of Zn-CP III, while the control strain produced none. For efficient global regulation of the complex pathway, the dtxR gene encoding the transcriptional regulator diphtheria toxin repressor (DtxR) was first overexpressed in C. glutamicum with hemAM and hemL genes, and its combinatorial expression was improved by using effective genetic tools. This engineered strain biosynthesized 68.31 ± 2.15 mg/l of Zn-CP III. Finally, fed-batch fermentation allowed for the production of 132.09 mg/l of Zn-CP III. This titer represents the highest in bacterial production of Zn-CP III reported to date, to our knowledge. This study demonstrates that engineered C. glutamicum can be a robust biotechnological model for the production of photosensitizer Zn-porphyrin.