Ultra-selective high-flux membranes from directly synthesized zeolite nanosheets.

A zeolite with structure type MFI is an aluminosilicate or silicate material that has a three-dimensionally connected pore network, which enables molecular recognition in the size range 0.5-0.6 nm. These micropore dimensions are relevant for many valuable chemical intermediates, and therefore MFI-type zeolites are widely used in the chemical industry as selective catalysts or adsorbents. As with all zeolites, strategies to tailor them for specific applications include controlling their crystal size and shape. Nanometre-thick MFI crystals (nanosheets) have been introduced in pillared and self-pillared (intergrown) architectures, offering improved mass-transfer characteristics for certain adsorption and catalysis applications. Moreover, single (non-intergrown and non-layered) nanosheets have been used to prepare thin membranes that could be used to improve the energy efficiency of separation processes. However, until now, single MFI nanosheets have been prepared using a multi-step approach based on the exfoliation of layered MFI, followed by centrifugation to remove non-exfoliated particles. This top-down method is time-consuming, costly and low-yield and it produces fragmented nanosheets with submicrometre lateral dimensions. Alternatively, direct (bottom-up) synthesis could produce high-aspect-ratio zeolite nanosheets, with improved yield and at lower cost. Here we use a nanocrystal-seeded growth method triggered by a single rotational intergrowth to synthesize high-aspect-ratio MFI nanosheets with a thickness of 5 nanometres (2.5 unit cells). These high-aspect-ratio nanosheets allow the fabrication of thin and defect-free coatings that effectively cover porous substrates. These coatings can be intergrown to produce high-flux and ultra-selective MFI membranes that compare favourably with other MFI membranes prepared from existing MFI materials (such as exfoliated nanosheets or nanocrystals).

Hydrothermal synthesis of zeolites with three-dimensionally ordered mesoporous-imprinted structure.

Zeolites are microporous materials with pores and channels of molecular dimensions that find numerous applications in catalysis, separations, ion exchange, etc. However, whereas uniformity of micropore size is a most desirable and enabling characteristic for many of their uses, in certain cases, for example in reactions involving bulky molecules, it is a limitation. For this reason, synthesis of hierarchical zeolites with micro- and mesoporosity is of considerable interest as a way to control molecular traffic for improved catalytic and separation performance. Herein, we report a general synthesis route for the confined synthesis of zeolites within three-dimensionally ordered mesoporous carbon templates by conventional hydrothermal synthesis. Various zeolites, including BEA, LTA, FAU, and LTL, with three-dimensionally ordered mesoporous-imprinted structure have been synthesized by this approach. It is expected that these hierarchical zeolite materials will provide building blocks for thin-film and other syntheses and may provide a basis for quantitatively studying the mass-transfer limitation on the catalytic performance of zeolite catalysts.

Sub-40 nm zeolite suspensions via disassembly of three-dimensionally ordered mesoporous-imprinted silicalite-1.

Zeolite nanocrystals were prepared from three-dimensionally ordered mesoporous-imprinted (3DOm-i) silicalite-1 by a fragmentation method involving sonication and dissolution within a certain pH range. 3DOm-i silicalite-1 with spherical elements with diameters ranging from 10 to 40 nm and a wide range of crystal sizes (100-200 nm, 500-600 nm, and 1-2 µm) was used as the starting material. The highest yield (57%) of isolated nanocrystals was obtained for 3DOm-i silicalite-1 with a crystal size of 100-200 nm and a spherical element diameter of 40 nm. The smallest nanocrystals obtained, albeit in very low yields, had a 10 nm diameter. Preparation of stable silicalite-1 nanocrystal suspensions fragmented from 20 and 40 nm 3DOm-i silicalite-1 was demonstrated. Cryogenic transmission electron microscopy showed that the isolated zeolite nanocrystals can be used as seeds for the epitaxial growth of silicalite-1. An application of these findings was demonstrated: silicalite-1 nanocrystal suspensions were used to deposit seed layers on porous α-alumina disks, which were converted to continuous thin (300-400 nm) films by secondary growth that exhibited both high permeances and separation factors (3.5 × 10(-7) mol m(-2) s(-1) Pa(-1) and 94-120, respectively, at 150 °C) for p- and o-xylene.

Hierarchical nanofabrication of microporous crystals with ordered mesoporosity.

Shaped zeolite nanocrystals and larger zeolite particles with three-dimensionally ordered mesoporous (3DOm) features hold exciting technological implications for manufacturing thin, oriented molecular sieve films and realizing new selective, molecularly accessible and robust catalysts. A recognized means for controlled synthesis of such nanoparticulate and imprinted materials revolves around templating approaches, yet identification of an appropriately versatile template has remained elusive. Because of their highly interconnected pore space, ordered mesoporous carbon replicas serve as conceptually attractive materials for carrying out confined synthesis of zeolite crystals. Here, we demonstrate how a wide range of crystal morphologies can be realized through such confined growth within 3DOm carbon, synthesized by replication of colloidal crystals composed of size-tunable (about 10-40 nm) silica nanoparticles. Confined crystal growth within these templates leads to size-tunable, uniformly shaped silicalite-1 nanocrystals as well as 3DOm-imprinted single-crystal zeolite particles. In addition, novel crystal morphologies, consisting of faceted crystal outgrowths from primary crystalline particles have been discovered, providing new insight into constricted crystal growth mechanisms underlying confined synthesis.

Vertically aligned carbon-nanotube arrays showing Schottky behavior at room temperature.

Vertically aligned carbon-nanotube (CNT) arrays were fabricated in the thin-film anodic aluminum oxide (AAO) templates on silicon wafers utilizing a niobium (Nb) thin film as the source electrode. The average diameter of the CNTs was 25 nm, and the number density was 3 x 10(10) cm(-2). The CNT arrays synthesized at 700 degrees C and above exhibited Schottky behavior even at 300 K, with energy gaps between 0.2 eV and 0.3 eV. However, individual CNTs obtained by removal of the template behaved as resistors at 300 K. The CNT/Nb oxide/Nb junction is thought to be responsible for the Schottky behavior. This structure can be a useful cornerstone in the fabrication of nanotransistors operating at room temperature.