Gustative Roussy Immune Score is a Predictor for Major Pathological Response in Rectal Cancer: A Result from the Preoperative Intraarterial Chemoembolization Combined with Radiotherapy (PCAR) Study.

Despite the emergence of various treatment strategies for rectal cancer based on neoadjuvant chemoradiotherapy, there is currently a lack of reliable biomarkers to determine which patients will respond well to neoadjuvant chemoradiotherapy. Through collecting hematological and biochemical parameters data of patients prior to receiving neoadjuvant chemoradiotherapy, we evaluated the predictive value of systemic inflammatory indices for pathological response and prognosis in rectal cancer patients. We found that baseline GRIm-Score was an independent predictor for MPR in rectal cancer patients. However, no association was observed between several commonly systemic inflammation indices and long-term outcome.

Phase Conversion Accelerating "Zn-Escape" Effect in ZnSe-CFs Heterostructure for High Performance Sodium-Ion Half/Full Batteries.

Sodium-ion batteries (SIBs) are considered as a promising large-scale energy storage system owing to the abundant and low-cost sodium resources. However, their practical application still needs to overcome some problems like slow redox kinetics and poor capacity retention rate. Here, a high-performance ZnSe/carbon fibers (ZnSe-CFs) anode is demonstrated with high electrons/Na+ transport efficiency for sodium-ion half/full batteries by engineering ZnSe/C heterostructure. The electrochemical behavior of the ZnSe-CFs heterostructure anode is deeply studied via in situ characterizations and theoretical calculations. Phase conversion is revealed to accelerate the "Zn-escape" effect for the formation of robust solid electrolyte interphase (SEI). This leads to the ZnSe-CFs delivering a superior rate performance of 206 mAh g-1 at 1500 mA g-1 for half battery and an initial discharge capacity of 197.4 mAh g-1 at a current density of 1 A g-1 for full battery. The work here heralds a promising strategy to synthesize advanced heterostructured anodes for SIBs, and provides the guidance for a better understanding of phase conversion anodes.

Individual treatment strategy of thyroglossal duct cyst carcinoma: a case report.

Background: Neoplasia of ectopic thyroid components is relatively rare in thyroglossal duct cysts. We report a case of histopathologically confirmed papillary thyroid carcinoma in a thyroglossal duct cyst, discuss its clinical characteristics of, and provide reference for diagnosis and treatment. Case Description: We presented a 25-year-old female went to hospital because of "a tumor in her neck". She was preoperatively diagnosed with thyroglossal duct cyst by cervical ultrasound, and enhanced computed tomography (CT). However, the solid component of the mass suggested intracystic neoplasia. She underwent Sistrunk surgical resection, and postoperative histopathology showed thyroglossal duct cyst, and papillary thyroid carcinoma in the cyst wall. The patient had no high-risk factors and had a low risk of recurrence. After full disclosure, the patient chose close follow-up, and to date there has been no recurrence. Conclusions: There are controversies regarding the origin of thyroglossal duct cyst carcinoma and the extent of surgery required, and a lack of unified treatment guidelines. We recommend tailoring individualized treatment based on individual risk stratification. By reporting this case, we hope to inform surgeons of the various abnormalities that may occur in ectopic thyroid tissue.

Ultrafast and stable phase transition realized in MoTe2-based memristive devices.

Phase engineering of two-dimensional transition metal dichalcogenides has received increasing attention in recent years due to its atomically thin nature and polymorphism. Here, we first realize an electric-field-induced controllable phase transition between semiconducting 2H and metallic 1T' phases in MoTe2 memristive devices. The device performs stable bipolar resistive switching with a cycling endurance of over 105, an excellent retention characteristic of over 105 s at an elevated temperature of 85 °C and an ultrafast switching of ∼5 ns for SET and ∼10 ns for RESET. More importantly, the device works in different atmospheres including air, vacuum and oxygen, and even works with no degradation after being placed in air for one year, indicating excellent surrounding and time stability. In situ Raman analysis reveals that the stable resistive switching originates from a controllable phase transition between 2H and 1T' phases. Density functional theory calculations reveal that the Te vacancy facilitates the phase transition in MoTe2 through decreasing the barrier between 2H and 1T' phases, and serving as nucleation sites due to the elimination of repulsive forces. This electric-field-induced controllable phase transition in MoTe2 devices offers new opportunities for developing reliable and ultrafast phase transition devices based on atomically thin membranes.

Establishment and Verification of UPLC-MS/MS Technique for Pharmacokinetic Drug-Drug Interactions of Selinexor with Posaconazole in Rats.

BACKGROUND: A method for the determination of selinexor by UPLC-MS/MS was established to study the effect of posaconazole on the pharmacokinetics of selinexor in rats. METHODS: The experiment rats were divided into group A (0.5% CMC-Na) and group B (posaconazole, 20 mg/kg), 6 rats in each group. 30 minutes after administration of 0.5% CMC-Na or posaconazole, all the rats were given selinexor (8 mg/kg), and plasma samples were collected. The plasma samples underwent acetonitrile protein precipitation, and were separated by UPLC on an Acquity UPLC BEH C18 column with gradient elution. Acetonitrile and 0.1% formic acid were used as the mobile phases. The analyte detection was used a Xevo TQ-S triple quadrupole tandem mass spectrometer and multiple reaction monitoring (MRM) for analyte monitoring. We use acetonitrile for protein precipitation. RESULTS: Selinexor had good linearity (1.0-1000 ng/mL, r2 =0.996 2), and the accuracy and precision, recovery rate and matrix effects(ME) were also met the FDA approval guidelines. Compared with group A, the Cmax, AUC(0-t) and AUC(0-∞) of selinexor in group B increased by 60.33%, 48.28% and 48.27%, and Tmax increased by 53.92%, CLz/F reduced by 32.08%. CONCLUSION: This bioanalysis method had been applied to the study of drug interactions in rats. It was found that posaconazole significantly increased the concentration of selinexor in rats. Therefore, when selinexor and posaconazole are combined, we should pay attention to the possible drug-drug interactions to reduce adverse reactions.

Properties of a Novel Animal Model of LPR.

BACKGROUND: Few satisfactory animal models of laryngopharyngeal reflux (LPR) is available. Interleukin-8 (IL-8) and vascular endothelial growth factor (VEGF) may be associated with the pathogenesis of LPR injuries and laryngeal carcinomas. OBJECTIVES: To establish an animal model of LPR and to explore the related pathological changes and cytokine expression in the vocal cord tissue. METHODS: Twenty rabbits were divided into experimental and control groups. Dilatation of the upper and lower esophageal sphincter were carried out in the experimental group. The pH of the pharynx, pathological, and ultrastructural changes of the laryngeal tissue, and expression of IL-8 and VEGF were compared between the experimental group and controls. RESULTS: pH monitoring results and the dilated intercellular space of the vocal cord mucosa showed that the experimental group developed laryngopharyngeal reflux. There were significant differences in the immunohistochemical staining scores of both IL-8 (P = 0.015) and VEGF (P = 0.007) between the experimental and control groups in the vocal cord tissue. CONCLUSIONS: We successfully established a model of LPR, showing histopathological and ultrastructural changes consistent with the disease. The expression of IL-8 and VEGF may increase during the pathogenesis of LPR.

Size effect of bifunctional gold in hierarchical titanium oxide-gold-cadmium sulfide with slow photon effect for unprecedented visible-light hydrogen production.

Gold nanoparticles (Au NPs) with surface plasmonic resonance (SPR) effect and excellent internal electron transfer ability have widely been combined with semiconductors for photocatalysis. However, the in-depth effects of Au NPs in multicomponent photocatalysts have not been completely understood. Herein, ternary titanium oxide-gold-cadmium sulfide (TiO2-Au-CdS, TAC) photocatalysts, based on hierarchical TiO2 inverse opal photonic crystal structure with different Au NPs sizes have been designed to reveal the SPR effect and internal electron transfer of Au NPs in the presence of slow photon effect. It appears that the SPR effect and internal electron transfer ability of Au NPs, depending on their sizes, play a synergistic effect on the photocatalytic enhancement. The ternary TAC-10 photocatalyst with ~ 10 nm Au NPs demonstrates an unprecedented hydrogen evolution rate of 47.6 mmolh-1g-1 under visible-light, demonstrating ~ 48% enhancement comparing to the sample without slow photon effect. In particular, a 9.83% apparent quantum yield under 450 nm monochromatic light is achieved for TAC-10. A model is proposed and finite-difference time-domain (FDTD) simulations reveal the size influence of Au NPs in ternary TAC photocatalysts. This work suggests that the rational design of bifunctional Au NPs coupling with slow photon effect could largely promote hydrogen production from visible-light driven water splitting.

n-p Heterojunction of TiO2-NiO core-shell structure for efficient hydrogen generation and lignin photoreforming.

Hydrogen evolution from biomass photoreforming has been widely recognized as a promising strategy for relieving the pressure from energy crisis and environmental pollution, as it could generate sustainable H2 and value-added bioproducts simultaneously. Combining p-type semiconductors with n-type semiconductors to form n-p heterojunction is an effective strategy to improve the photocatalytic quantum efficiency by enhancing the separation of photogenerated electrons and holes, which could greatly facilitate the realization of such biomass photorefinery concept. However, the incompact contact between the n-type and p-type semiconductors often induces the aggregation of photogenerated electrons and holes. In this work, we design and synthesize an ultrafine n-p heterojunction TiO2-NiO core-shell structure to overcome the incompact contact in the n-p interface. When the n-p heterojunction photocatalysts are evaluated for photocatalytic water splitting and biomass lignin photoreforming respectively, the as-fabricated TiO2-NiO nanocomposite with 3.25% NiO demonstrates the highest hydrogen generation of 23.5 mmol h-1 g-1 from water splitting and H2 (0.45 mmol h-1 g-1) and CH4 (0.03 mmol h-1 g-1) cogeneration with reasonable amount of fatty acids (palmitic acid and stearic acid) production from lignin photoreforming. The excellent photocatalytic activity is ascribed to the synergistic effects of high crystallinity of TiO2 ultrafine nanoparticles, core-shell structure and n-p heterojunction with NiO nanoclusters. This present work demonstrates a simple and efficient method to fabricate ultrafine n-p heterojunction core-shell structure for noble-metal free catalyst for both water splitting and biomass photoreforming.

Coproduction of hydrogen and lactic acid from glucose photocatalysis on band-engineered Zn1-xCdxS homojunction.

Photocatalytic transformation of biomass into value-added chemicals coupled with co-production of hydrogen provides an explicit route to trap sunlight into the chemical bonds. Here, we demonstrate a rational design of Zn1-xCdxS solid solution homojunction photocatalyst with a pseudo-periodic cubic zinc blende (ZB) and hexagonal wurtzite (WZ) structure for efficient glucose conversion to simultaneously produce hydrogen and lactic acid. The optimized Zn0.6Cd0.4S catalyst consists of a twinning superlattice, has a tuned bandgap, and displays excellent efficiency with respect to hydrogen generation (690 ± 27.6 µmol·h-1·gcat. -1), glucose conversion (~90%), and lactic acid selectivity (~87%) without any co-catalyst under visible light irradiation. The periodic WZ/ZB phase in twinning superlattice facilitates better charge separation, while superoxide radical (⋅O2 -) and photogenerated holes drive the glucose transformation and water oxidation reactions, respectively. This work demonstrates that rational photocatalyst design could realize an efficient and concomitant production of hydrogen and value-added chemicals from glucose photocatalysis.

Aptamer-T Cell Targeted Therapy for Tumor Treatment Using Sugar Metabolism and Click Chemistry.

The development of a tumor-targeted immunotherapy is highly required. The most advanced application is the use of CD19 chimeric antigen receptor (CAR)T (CAR-T) cells to B cell malignancies, but there are still side effects including potential carcinogenicity of lentiviral or retroviral insertion into the host cell genome. Here, we developed a nonviral aptamer-T cell targeted strategy for tumor therapy. Tumor cells surface-specific ssDNA aptamers were conjugated to CD3+T cells (aptamer-T cells) using N-azidomannosamine (ManNAz) sugar metabolic cell labeling and click chemistry. We found that the aptamer-T cells could specifically target and bind to tumor cells (such as SGC-7901 gastric cancer cell and CT26 colon carcinoma cell) in vitro and in mice after adoptively transfer in. Aptamer-T cells led to significant regression in tumor volume due to being enriched at tumor microenvironment and producing strong cytotoxicity activities of CD3+T cells with enhanced perforin, granzyme B, CD107a, CD69, and FasL expression. Moreover, aptamer-T displayed even stronger antitumor effects than an anti-PD1 immune-checkpoint monoclonal antibody (mAb) treatment in mice and combination with anti-PD1 yielded synergic antitumor effects. This study uncovers the strong potential of the adoptive nonviral aptamer-T cell strategy as a feasible and efficacious approach for tumor-targeted immunotherapy application.

In-Situ Growing Mesoporous CuO/O-Doped g-C3N4 Nanospheres for Highly Enhanced Lithium Storage.

The development of lithium-ion batteries using transition metal oxides has recently become more attractive, due to their higher specific capacities, better rate capability, and high energy densities. Herein, the in situ growth of advanced mesoporous CuO/O-doped g-C3N4 nanospheres is carried out in a two step hydrothermal process at 180 °C and annealing in air at 300 °C. When used as an anode material, the CuO/O-doped g-C3N4 nanospheres achieve a high reversible discharge specific capacity of 738 mAhg-1 and a capacity retention of ∼75.3% after 100 cycles at a current density 100 mAg-1 compared with the pure CuO (412 mAhg-1, 47%) and O-doped g-C3N4 (66 mAhg-1, 53%). Even at high current density 1 Ag-1, they exhibit a reversible discharge specific capacity of 503 mAhg-1 and capacity retention ∼80% over 500 cycles. The excellent electrochemical performance of the CuO/O-doped g-C3N4 nanocomposite is attributed to the following factors: (I) the in situ growing CuO/O-doped g-C3N4 avoids CuO nanoparticle aggregation, leading to the improved lithium ion transfer and electrolyte penetration inside the CuO/O-doped g-C3N4 anode, thus promoting the utilization of CuO; (II) the porous structure provides efficient space for Li+ transfer during the insertion/extraction process to avoid large volume changes; (III) the O-doping g-C3N4 decreases its band gap, ensuring the increased electrical conductivity of CuO/O-doped g-C3N4; and (IV) the strong interaction between CuO and O-doped g-C3N4 ensures the stability of the structure during cycling.

Type II heterojunction in hierarchically porous zinc oxide/graphitic carbon nitride microspheres promoting photocatalytic activity.

Graphitic carbon nitride (g-C3N4) is a visible light active semiconductor. However, low conductivity and high recombination rate of photogenerated electrons and holes limit its application in photocatalysis. In this work, we design and synthesize hierarchically porous zinc oxide/graphitic carbon nitride (ZnO/g-C3N4) microspheres with type-II heterojunction to effectively degrade rhodamine B (RhB) via increasing the charge-separation efficiency. The ultraviolet-visible (UV-Vis) absorption spectra, Mott-Schottky plots and valence band X-ray photoelectron spectroscope confirm the formation of type-II heterojunction between ZnO nanocrystals and g-C3N4 nanosheets. As a result, the 1.5-ZnO/g-C3N4 composite (the mass ratio of zinc acetate dihydrate to g-C3N4 is 1.5) exhibits the highest photocatalytic activity with good stability and higher photocatalytic degradation rate comparing to pure g-C3N4 and pure ZnO. In addition, our results confirm that O2- and h+ are the main active species for ZnO/g-C3N4 in degradation of RhB.

Cascade electronic band structured zinc oxide/bismuth vanadate/three-dimensional ordered macroporous titanium dioxide ternary nanocomposites for enhanced visible light photocatalysis.

Ternary zinc oxide/bismuth vanadate/three-dimensional ordered macroporous titanium dioxide (ZnO/BiVO4/3DOM TiO2) heterojuncted nanocomposites with cascade electronic band structures were successfully designed and synthesized for visible light photodegradation of two different molecules: Rhodamine B (RhB) and Tartrazine. The photocatalytic active species have been investigated by using electron scavenger (AgNO3) and hole scavenger (Triethanolamine: TEOA). The band edge positions of each component in tenary nanocomposites have been measured by using photoelectrochemical Mott-Schottky method and valence band XPS (VB-XPS) spectroscopy. Within the heterojunction, charges are favorably and spatially separated through the gradient potential at the interfaces. This largely suppresses the recombination of photogenerated electrons and holes. Furthermore, 3DOM inverse opal structure is beneficial for high diffusion efficiency and highly accessible surface area of reactants and light and multiple scattering for light harvesting. Consequently, these heterojuncted nanocomposites exhibit highly enhanced photocatalytic performance compared with pure BiVO4 nanostructure, and binary BiVO4/3DOM TiO2, ZnO/BiVO4 nanocomposites. A detailed mechanism of charge transfer is proposed for these ternary ZnO/BiVO4/3DOM TiO2 nanocomposites on the basis of a large series of spectroscopic and photocatalytic results. Our work demonstrates clearly that coupling multicomponent semiconductors with different energy levels of conduction and valence bands can significantly increase the photogenerated charge carriers through the efficient charge separation across their multiple interfaces. This work gives some new ideas on developing new visible light responsive nanocomposites for highly efficient solar energy utilization.

MOF-derived nitrogen-doped core-shell hierarchical porous carbon confining selenium for advanced lithium-selenium batteries.

The lithium-selenium (Li-Se) battery has attracted growing interest recently due to its high energy density and theoretical capacity. However, the shuttle effect and volume change during cycling severely hinder its further application. In this work, we report a metal-organic framework (MOF)-derived nitrogen-doped core-shell hierarchical porous carbon (N-CSHPC) with interconnected meso/micropores to effectively confine Se for high-performance Li-Se batteries. The micropores were located at the ZIF-8-derived core and the ZIF-67-derived shell, while mesopores appeared at the core-shell interface after the pyrolysis of the core-shell ZIF-8@ZIF-67 precursor. Such a special hierarchical porous structure effectively confined selenium and polyselenides to prevent their dissolution from the pores and also alleviated the volume change. In particular, in situ nitrogen doping, which afforded N-CSHPC, not only improved the electrical conductivity of Se but also provided strong chemical adsorption on Li2Se, as confirmed by density functional theory calculations. On the basis of dual-physical confinement and strong chemisorption, Se/N-CSHPC-II (molar ratio of Co source to Zn source of 1.0 in the core-shell ZIF-8@ZIF-67 precursor) exhibited reversible capacities of up to 555 mA h g-1 after 150 cycles at 0.2 C and 462 mA h g-1 after 200 cycles at 0.5 C and even a discharge capacity of 432 mA h g-1 after 200 cycles at 1 C. Our demonstration here suggests that the carefully designed Se/C composite can improve the reversible capacity and cycling stability of Se cathodes for Li-Se batteries.

Molybdenum disulfide quantum dots directing zinc indium sulfide heterostructures for enhanced visible light hydrogen production.

Photocatalytic hydrogen (H2) production based on semiconductors is important to utilize solar light for clean energy and environment. Herein, we report a visible light responsive heterostructure, designed and constructed by molybdenum disulfide quantum dots (MoS2-QDs) in-situ seeds-directing growth and self-assemble of zinc indium sulfide (ZnIn2S4) nanosheet to ensure their full contact through a simple one-step solvothermal method for highly improved visible light H2 production. The MoS2-QDs in-situ seeds-directing ZnIn2S4 heterostructure not only builds heterojunctions between MoS2 and ZnIn2S4 to spatially separate the photogenerated electrons and holes, but also serves as the active sites trapping photogenerated electrons to facilitate H2 evolution. As a result, MoS2-QDs/ZnIn2S4 exhibits high photocatalytic activity for H2 production, and the optimized 2 wt% MoS2-QDs/ZnIn2S4 (2MoS2-QDs/ZnIn2S4) heterostructure exhibits the highest H2 evolution rate of 7152 umol·h-1·g-1 under visible light, ∼9 times of pure ZnIn2S4. Our strategy here could shed some lights on developing noble-metal free heterostructures for highly efficient photocatalytic H2 production.

[Spatial variation of soil carbon and stable isotopes in the southern margin desert of Junggar Basin, China]. / å‡†å™¶å°”ç›†åœ°å—ç¼˜è’æ¼ åŒºåœŸå£¤ç¢³åˆ†å¸ƒåŠå ¶ç¨³å®šåŒä½ç´ å˜åŒ–.

The southern margin desert of Junggar Basin in the central arid region of Asia was selec-ted as the study area. To gain insight into the distribution characteristic of stable carbon isotope and the relationship between the change of soil carbon and the distance to oasis of soil organic carbon (SOC) and soil inorganic carbon (SIC), three belt transects were set according to the distance between the desert and the oasis in edge, middle and hinterland of the desert respectively, and collected the soil profile samples with depth of 2 m. The results indicated that the SOC content reduced with the soil depth, and the variation with the distance to oasis was the edge> the middle> the hinterland. The δ13C value of SOC varied in the range of -21.92‰ to -17.41‰, and decreased with the depth; the range in the middle and hinterland was -25.20‰ to -19.30‰, and increased then declined with the depth. Therefore, we could infer that the C3 plants played a dominant role in the central of desert, and had experienced the succession from C3 plants to C4 plants. The average content of SIC was 38.98 g·kg-1 in the edge of desert, which was about 6.01 folds as large as the content in the hinterland. This indicated that a large number of SIC with 0-2 m depth were clustered in the edge of the desert. The δ13C value of SIC increased first then decreased with the soil depth, and enriched in the bottom layer, which was mainly affected by the original carbonate content and soil carbon dioxide.