YTHDF2 protein stabilization by the deubiquitinase OTUB1 promotes prostate cancer cell proliferation via PRSS8 mRNA degradation.

Prostate cancer is a leading cause of cancer-related mortality in males. Dysregulation of RNA adenine N-6 methylation (m6A) contributes to cancer malignancy. m6A on mRNA may affect mRNA splicing, turnover, transportation, and translation. m6A exerts these effects, at least partly, through dedicated m6A reader proteins, including YTH domain-containing family protein 2 (YTHDF2). YTHDF2 is necessary for development while its dysregulation is seen in various cancers, including prostate cancer. However, the mechanism underlying the dysregulation and function of YTHDF2 in cancer remains elusive. Here, we find that the deubiquitinase OUT domain-containing ubiquitin aldehyde-binding protein 1 (OTUB1) increases YTHDF2 protein stability by inhibiting its ubiquitination. With in vivo and in vitro ubiquitination assays, OTUB1 is shown to block ubiquitin transfer to YTHDF2 independent of its deubiquitinase activity. Furthermore, analysis of functional transcriptomic data and m6A-sequencing data identifies PRSS8 as a potential tumor suppressor gene. OTUB1 and YTHDF2 decrease mRNA and protein levels of PRSS8, which is a trypsin-like serine protease. Mechanistically, YTHDF2 binds PRSS8 mRNA and promotes its degradation in an m6A-dependent manner. Further functional study on cellular and mouse models reveals PRSS8 is a critical downstream effector of the OTUB1-YTHDF2 axis in prostate cancer. We find in prostate cancer cells, PRSS8 decreases nuclear ß-catenin level through E-cadherin, which is independent of its protease activity. Collectively, our study uncovers a key regulator of YTHDF2 protein stability and establishes a functional OTUB1-YTHDF2-PRSS8 axis in prostate cancer.

TFE3-SLC36A1 axis promotes resistance to glucose starvation in kidney cancer cells.

Higher demand for nutrients including glucose is characteristic of cancer. "Starving cancer" has been pursued to curb tumor progression. An intriguing regime is to inhibit glucose transporter GLUT1 in cancer cells. In addition, during cancer progression, cancer cells may suffer from insufficient glucose supply. Yet, cancer cells can somehow tolerate glucose starvation. Uncovering the underlying mechanisms shall shed insight into cancer progression and benefit cancer therapy. TFE3 is a transcription factor known to activate autophagic genes. Physiological TFE3 activity is regulated by phosphorylation-triggered translocation responsive to nutrient status. We recently reported TFE3 constitutively localizes to the cell nucleus and promotes cell proliferation in kidney cancer even under nutrient replete condition. It remains unclear whether and how TFE3 responds to glucose starvation. In this study, we show TFE3 promotes kidney cancer cell resistance to glucose starvation by exposing cells to physiologically relevant glucose concentration. We find glucose starvation triggers TFE3 protein stabilization through increasing its O-GlcNAcylation. Furthermore, through an unbiased functional genomic study, we identify SLC36A1, a lysosomal amino acid transporter, as a TFE3 target gene sensitive to TFE3 protein level. We find SLC36A1 is overexpressed in kidney cancer, which promotes mTOR activity and kidney cancer cell proliferation. Importantly, SLC36A1 level is induced by glucose starvation through TFE3, which enhances cellular resistance to glucose starvation. Suppressing TFE3 or SLC36A1 significantly increases cellular sensitivity to GLUT1 inhibitor in kidney cancer cells. Collectively, we uncover a functional TFE3-SLC36A1 axis that responds to glucose starvation and enhances starvation tolerance in kidney cancer.

The P53-P21-RB1 pathway promotes BRD4 degradation in liver cancer through USP1.

Liver cancer is notoriously refractory to conventional therapeutics. Tumor progression is governed by the interplay between tumor-promoting genes and tumor-suppressor genes. BRD4, an acetyl lysine-binding protein, is overexpressed in many cancer types, which promotes activation of a pro-tumor gene network. But the underlying mechanism for BRD4 overexpression remains incompletely understood. In addition, understanding the regulatory mechanism of BRD4 protein level will shed insight into BRD4-targeting therapeutics. In this study, we investigated the potential relation between BRD4 protein level and P53, the most frequently dysregulated tumor suppressor. By analyzing the TCGA datasets, we first identify a strong negative correlation between protein levels of P53 and BRD4 in liver cancer. Further investigation shows that P53 promotes BRD4 protein degradation. Mechanistically, P53 indirectly represses the transcription of USP1, a deubiquitinase, through the P21-RB1 axis. USP1 itself is also overexpressed in liver cancer and we show USP1 deubiquitinates BRD4 in vivo and in vitro, which increases BRD4 stability. With cell proliferation assays and xenograft model, we show the pro-tumor role of USP1 is partially mediated by BRD4. With functional transcriptomic analysis, we find the USP1-BRD4 axis upholds expression of a group of cancer-related genes. In summary, we identify a functional P53-P21-RB1-USP1-BRD4 axis in liver cancer.

TRIM28 represses renal cell carcinoma cell proliferation by inhibiting TFE3/KDM6A-regulated autophagy.

Autophagy plays a pivotal role in physiology and pathophysiology, including cancer. Mechanisms of autophagy dysregulation in cancer remain elusive. Loss of function of TRIM28, a multifunction protein, is seen in familial kidney malignancy, but the mechanism by which TRIM28 contributes to the etiology of kidney malignancy is unclear. In this study, we show TRIM28 retards kidney cancer cell proliferation through inhibiting autophagy. Mechanistically, we find TRIM28 promotes ubiquitination and proteasome-mediated degradation of transcription factor TFE3, which is critical for autophagic gene expression. Genetic activation of TFE3 due to gene fusion is known to cause human kidney malignancy, but whether and how transcription activation by TFE3 involves chromatin changes is unclear. Here, we find another mode of TFE3 activation in human renal carcinoma. We find that TFE3 is constitutively localized to the cell nucleus in human and mouse kidney cancer, where it increases autophagic gene expression and promotes cell autophagy as well as proliferation. We further uncover that TFE3 interacts with and recruits histone H3K27 demethylase KDM6A for autophagic gene upregulation. We reveal that KDM6A contributes to expression of TFE3 target genes through increasing H3K4me3 rather than demethylating H3K27. Collectively, in this study, we identify a functional TRIM28-TFE3-KDM6A signal axis, which plays a critical role in kidney cancer cell autophagy and proliferation.

Amorphization of MXenes: Boosting Electrocatalytic Hydrogen Evolution.

The emergence of amorphous 2D materials has opened up new avenue for materials science and nanotechnology in the recent years. Their unique disordered structure, excellent large-area uniformity, and low fabrication cost make them important for various industrial applications. However, there have no reports on the amorphous MXene materials. In this work, the amorphous Ti2C-MXene (a-Ti2C-MXene) model is built by ab initio molecular dynamics (AIMD) approach. This model is a unique amorphous model, which is totally different from continuous random network (CRN) model for silicate glass and amorphous model for amorphous 2D BN and graphene. The structure analysis shows that the a-Ti2C-MXene composited by [Ti5C] and [Ti6C] cluster, which are surrounded by the region of mixed cluster [TixC], [Ti-Ti] cluster, and [C-C] cluster. There is a high chemical activity for hydrogen evolution reaction (HER) in a-Ti2C-MXene with |ΔGH| 0.001 eV, implying that they serve as the potential boosting HER performance. The work provides insights that can pave the way for future research on novel MXene materials, leading to their increased applications in various fields.

Symbiosis between Dendrobium catenatum protocorms and Serendipita indica involves the plant hypoxia response pathway.

Mycorrhizae are ubiquitous symbioses established between fungi and plant roots. Orchids, in particular, require compatible mycorrhizal fungi for seed germination and protocorm development. Unlike arbuscular mycorrhizal fungi, which have wide host ranges, orchid mycorrhizal fungi are often highly specific to their host orchids. However, the molecular mechanism of orchid mycorrhizal symbiosis is largely unknown compared to that of arbuscular mycorrhizal and rhizobial symbiosis. Here, we report that an endophytic Sebacinales fungus, Serendipita indica, promotes seed germination and the development of protocorms into plantlets in several epiphytic Epidendroideae orchid species (6 species in 2 genera), including Dendrobium catenatum, a critically endangered orchid with high medicinal value. Although plant-pathogen interaction and high meristematic activity can induce the hypoxic response in plants, it has been unclear whether interactions with beneficial fungi, especially mycorrhizal ones, also involve the hypoxic response. By studying the symbiotic relationship between D. catenatum and S. indica, we determined that hypoxia-responsive genes, such as those encoding alcohol dehydrogenase (ADH), are highly induced in symbiotic D. catenatum protocorms. In situ hybridization assay indicated that the ADH gene is predominantly expressed in the basal mycorrhizal region of symbiotic protocorms. Additionally, the ADH inhibitors puerarin and 4-methylpyrazole both decreased S. indica colonization in D. catenatum protocorms. Thus, our study reveals that S. indica is widely compatible with orchids and that ADH and its related hypoxia-responsive pathway are involved in establishing successful symbiotic relationships in germinating orchids.

Commonly Existing Hole-Capturer Organics Adsorption-Induced Recombination over Metal/Semiconductor Perimeters: A Possible Important Factor Affecting Photocatalytic Efficiencies.

Photocatalysis is a physiochemical effect arising from the relaxation of photoinduced electrons from the conduction band to the valence band. Controlling the electron relaxation to occur through photocatalytic pathways and prohibiting other relaxations is the main scientific thought for photocatalytic studies. It is needed to know the parallel relaxation pathways that can compete with photocatalytic reactions. By means of in situ photoconductances (PCs) and photoinduced absorptions (PAs), the current research studied the photoinduced electron relaxations of the Au/TiO2 in different atmospheres and at different temperatures. The PC and PA relaxations became different and fast when methanol, ethanol, isopropanol, and acetone were introduced; they also tend to decrease as temperature increases, while that of the undecorated TiO2 in all atmospheres and the Au/TiO2 in pure N2 increased. The results indicated that the organic adsorptions over the Au/TO2 perimeters change the relaxation pathway, and a hole-capturing organics adsorption-induced recombination over the Au/TiO2 perimeter was proposed to explain the relaxations. We found that this relaxation also exists for Ag/TiO2, Pt/TiO2, and Au/ZnO, so it is a commonly existing physical course for the metal/semiconductor (M/S) materials. The effect of the organics and M/S structures on the relaxation was discussed, and the relationship with photocatalytic reactions was also analyzed. Our finding means that blocking this relaxation pathway is an effective way to increase photocatalytic activities, which might open a door for highly active photocatalyst developments.

Adaptive river flow measurement method based on spatiotemporal image velocimetry and optical flow.

This paper proposes an adaptive river discharge measurement method based on spatiotemporal image velocimetry (STIV) and optical flow to solve the problem of blurred texture features and limited measurement accuracy under complex natural environmental conditions. Optical flow tracking generates spatiotemporal images by following the flow mainstream direction of rivers with both regular and irregular natural banks. A texture similarity function filtering method effectively enhances spatiotemporal texture features. The proposed method is applied to a natural river, with measurement results from a propeller-type current meter used as truth values. It is evaluated and compared with three other methods regarding measurement accuracy, error, and other evaluation indices. The results demonstrate that the method significantly improves spatiotemporal image quality. Its estimation outcomes perform better across all evaluation metrics, enhancing the adaptability and accuracy of the flow measurement method.

Enabling Interfacial Lattice Matching by Selective Epitaxial Growth of CuS Crystals on Bi2WO6 Nanosheets for Efficient CO2 Photoreduction into Solar Fuels.

Photocatalytic CO2 reduction serves as an important technology for value-added solar fuel production; however, it is generally limited by interfacial charge transport. To address this limitation, a two-dimensional/two-dimensional (2D/2D) p-n heterojunction CuS-Bi2WO6 (CS-BWO) with highly connected and matched interfacial lattices was designed via a two-step hydrothermal tandem synthesis strategy. The integration of CuS with BWO created a robust interface electric field and provided fast charge transfer channels due to the work function difference, as well as highly connected and matched interfacial lattices. The p-n heterojunction promoted electron transfer from the Cu to Bi sites, leading to coordination of Bi sites with high electronic density and low oxidation state. The Bi sites in BWO nanosheets facilitated the adsorption and activation of CO2, and generation of high-coverage key intermediate b-CO32-, while broad light-harvesting CuS (CS) provide abundant photoinduced electrons that were injected into the conduction band of BWO for CO2 photoreduction reaction. Remarkably, the p-n heterojunction CS-BWO exhibited CO and CH4 yields of 135.7 and 62.5 µmol g-1, respectively, which were significantly higher than those of CS, BWO, and physical mixture CS-BWO nanosheets. This work provided an innovative design strategy for developing high-activity heterojunction photocatalyst for converting CO2 into value-added solar fuels.

Lysine demethylase KDM1A promotes cell growth via FKBP8-BCL2 axis in hepatocellular carcinoma.

Advanced hepatocellular carcinoma (HCC) has a dismal prognosis. KDM1A (lysine demethylase 1A), overexpressed in multiple cancer types, is a lysine demethylase that targets both histone and nonhistone proteins. However, it is unclear how KDM1A expression affects HCC etiology. Here, we show that KDM1A can interact with and demethylate FKBP8 (FKBP prolyl isomerase 8), a cytoplasmic protein that regulates cell survival through the antiapoptotic protein BCL2 (B-cell lymphoma-2). We show that demethylation of FKBP8 enhances its ability to stabilize BCL2. Consistently, we observed positive correlation between KDM1A and BCL2 protein levels in liver cancer patients. Functionally, we reveal that FKBP8 demethylation by KDM1A is critical for liver cancer cell growth in vitro and in vivo. We went on to explore the mechanisms that might regulate KDM1A cytoplasmic localization. We found that the cytoplasmic localization and protein stability of KDM1A were promoted by acetylation at lysine-117 by the acetyl transferase KAT8 (lysine acetyltransferase 8). In agreement with this, we show that KDM1A-K117 (lysine 117) acetylation promotes demethylation of FKBP8 and level of BCL2. Finally, it has been shown that the efficacy of sorafenib, a first-line treatment for advanced HCC, is limited by clinical resistance. We show that KDM1A and BCL2 protein levels are increased during acquired sorafenib resistance, whereas inhibiting KDM1A can antagonize sorafenib resistance. Collectively, these results define a functional KDM1A-FKBP8-BCL2 axis in HCC.

Electrospinning Photocatalysis Meet In Situ Irradiated XPS: Recent Mechanisms Advances and Challenges.

Producing solar fuels over photocatalysts under light irradiation is a considerable way to alleviate energy crises and environmental pollution. To develop the yields of solar fuels, photocatalysts with broad light absorption, fast charge carrier migration, and abundant reaction sites need to be designed. Electrospun 1D nanofibers with large specific areas and high porosity have been widely used in the efficient production of solar fuels. Nevertheless, it is challenging to do in-depth mechanism research on electrospun nanofiber-based photocatalysts since there are multiple charge transfer routes and various reaction sites in these systems. Here, the basic principles of electrospinning and photocatalysis are systemically discussed. Then, the different roles of electrospun nanofibers played in recent research to boost photocatalytic efficiency are highlighted. It is noteworthy that the working principles and main advantages of in situ irradiated photoelectron spectroscopy (ISI-XPS), a new technique to investigate migration routes of charge carriers and identify active sites in electrospun nanofibers based photocatalysts, are summarized for the first time. At last, a brief summary on the future orientation of photocatalysts based on electrospun nanofibers as well as the perspectives on the development of the ISI-XPS technique are also provided.

In Situ 1D Carbon Chain-Mail Catalyst Assembly for Stable Lithium-Sulfur Full Batteries.

The main obstacles for the commercial application of Lithium-Sulfur (Li-S) full batteries are the large volume change during charging/discharging process, the shuttle effect of lithium polysulfide (LiPS), sluggish redox kinetics, and the indisciplinable dendritic Li growth. Especially the overused of metal Li leads to the low utilization of active Li, which seriously drags down the actual energy density of Li-S batteries. Herein, an efficient design of dual-functional CoSe electrocatalyst encapsulated in carbon chain-mail (CoSe@CCM) is employed as the host both for the cathode and anode regulation simultaneously. The carbon chain-mail constituted by carbon encapsulated layer cross-linking with carbon nanofibers protects CoSe from the corrosion of chemical reaction environment, ensuring the high activity of CoSe during the long-term cycles. The Li-S full battery using this carbon chain-mail catalyst with a lower negative/positive electrode capacity ratio (N/P < 2) displays a high areal capacity of 9.68 mAh cm-2 over 150 cycles at a higher sulfur loading of 10.67 mg cm-2 . Additionally, a pouch cell is stable for 80 cycles at a sulfur loading of 77.6 mg, showing the practicality feasibility of this design.

Tailoring Advanced N-Defective and S-Doped g-C3 N4 for Photocatalytic H2 Evolution.

Although challenges remain, synergistic adjusting various microstructures and photo/electrochemical parameters of graphitic carbon nitride (g-C3 N4 ) in photocatalytic hydrogen evolution reaction (HER) are the keys to alleviating the energy crisis and environmental pollution. In this work, a novel nitrogen-defective and sulfur-doped g-C3 N4 (S-g-C3 N4 -D) is designed elaborately. Subsequent physical and chemical characterization proved that the developed S-g-C3 N4 -D not only displays well-defined 2D lamellar morphology with a large porosity and a high specific surface area but also has an efficient light utilization and carriers-separation and transfer. Moreover, the calculated optimal Gibbs free energy of adsorbed hydrogen (ΔGH* ) for S-g-C3 N4 -D at the S active sites is close to zero (≈0.24 eV) on the basis of first-principle density functional theory (DFT). Accordingly, the developed S-g-C3 N4 -D catalyst shows a high H2 evolution rate of 5651.5 µmol g-1  h-1 . Both DFT calculations and experimental results reveal that a memorable defective g-C3 N4 /S-doped g-C3 N4 step-scheme heterojunction is constructed between S-doped domains and N-defective domains in the structural configuration of S-g-C3 N4 -D. This work exhibits a significant guidance for the design and fabrication of high-efficiency photocatalysts.

Correction: Additive-mediated intercalation and surface modification of MXenes.

Correction for 'Additive-mediated intercalation and surface modification of MXenes' by Jing Zou et al., Chem. Soc. Rev., 2022, DOI: 10.1039/d0cs01487g.

Additive-mediated intercalation and surface modification of MXenes.

2D carbides and nitrides of transition metals, also known as MXenes, are an emerging class of 2D nanomaterials that have shown excellent performances and broad application prospects in the fields of energy storage, catalysis, sensing, electromagnetic shielding, electronics and photonics, and life sciences. This unusual diversity of applications is due to their superior hydrophilicity and conductivity, high carrier concentration, ultra-high volumetric capacitance, rich surface chemistry, and large specific surface area. However, it is difficult to make MXenes with the desired surface functional groups that deliver high reactivity and high stability, because most MXenes are extracted from ceramics (MAX phase) by an etching process, where a large number of metal atoms are inevitably exposed on the surface, with other anions and cations embedded uncontrollably. The exposed metal atoms and implanted ions are thermodynamically unstable and readily react with trace oxygen or oxygen-containing groups to form the corresponding metal oxides or degrade chemically, resulting in a sharp decline in activity and loss of excellent physicochemical properties. The addition of certain synergistic additives during the intercalation and chemical modification of surface functional groups under non-hazardous conditions can result in stable and efficient MXene-based materials with exceptional optical, electrical, and magnetic properties. This review discusses several such methods, mainly additive-mediated intercalation and chemical modification of the surface functional groups of MXene-based materials, followed by their potential applications. Finally, perspectives are given to discuss the future challenges and promising opportunities of this exciting field.

What role does the seed coat play during symbiotic seed germination in orchids: an experimental approach with Dendrobium officinale.

BACKGROUND: Orchids require specific mycorrhizal associations for seed germination. During symbiotic germination, the seed coat is the first point of fungal attachment, and whether the seed coat plays a role in the identification of compatible and incompatible fungi is unclear. Here, we compared the effects of compatible and incompatible fungi on seed germination, protocorm formation, seedling development, and colonization patterns in Dendrobium officinale; additionally, two experimental approaches, seeds pretreated with NaClO to change the permeability of the seed coat and fungi incubated with in vitro-produced protocorms, were used to assess the role of seed coat played during symbiotic seed germination. RESULTS: The two compatible fungi, Tulasnella sp. TPYD-2 and Serendipita indica PI could quickly promote D. officinale seed germination to the seedling stage. Sixty-two days after incubation, 67.8 ± 5.23% of seeds developed into seedlings with two leaves in the PI treatment, which was significantly higher than that in the TPYD-2 treatment (37.1 ± 3.55%), and massive pelotons formed inside the basal cells of the protocorm or seedlings in both compatible fungi treatments. In contrast, the incompatible fungus Tulasnella sp. FDd1 did not promote seed germination up to seedlings at 62 days after incubation, and only a few pelotons were occasionally observed inside the protocorms. NaClO seed pretreatment improved seed germination under all three fungal treatments but did not improve seed colonization or promote seedling formation by incompatible fungi. Without the seed coat barrier, the colonization of in vitro-produced protocorms by TPYD-2 and PI was slowed, postponing protocorm development and seedling formation compared to those in intact seeds incubated with the same fungi. Moreover, the incompatible fungus FDd1 was still unable to colonize in vitro-produced protocorms and promote seedling formation. CONCLUSIONS: Compatible fungi could quickly promote seed germination up to the seedling stage accompanied by hyphal colonization of seeds and formation of many pelotons inside cells, while incompatible fungi could not continuously colonize seeds and form enough protocorms to support D. officinale seedling development. The improvement of seed germination by seed pretreatment may result from improving the seed coat hydrophilicity and permeability, but seed pretreatment cannot change the compatibility of a fungus with an orchid. Without a seed coat, the incompatible fungus FDd1 still cannot colonize in vitro-produced protocorms or support seedling development. These results suggest that seed coats are not involved in symbiotic germination in D. officinale.

Enhanced Activities in Alkaline Hydrogen and Oxygen Evolution Reactions on MoS2 Electrocatalysts by In-Plane Sulfur Defects Coupled with Transition Metal Doping.

2D transition metal disulfides (TMDs) are promising and cost-effective alternatives to noble-metal-based catalysts for hydrogen production. Activation of the inert basal plane of TMDs is crucial to improving the catalytic efficiency. Herein, introduction of in-plane sulfur vacancies (Sv ) and 3d transition metal dopants in concert activates the basal planes of MoS2 (M-Sv -MoS2 ) to achieve high activities in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Acetate introducing mild wet chemical etching removes surface S atoms facilitating subsequent cation exchange between the exposed Mo atoms and targeted metal ions in solution. Density-functional theory calculation demonstrates that the exposed 3d transition metal dopants in MoS2 basal planes serve as multifunctional active centers, which not only reduce ΔGH* but also accelerate water oxidation. As a result, the optimal Ni-Sv -MoS2 and Co-Sv -MoS2 electrocatalysts show excellent stability and alkaline HER and OER characteristics such as low overpotentials of 101 and 190 mV at 10 mA cm-2 , respectively. The results reveal a strategy to activate the inert MoS2 basal planes by defect and doping co-engineering and the technique can be extended to other types of TMDs for high-efficiency electrocatalysis beyond water splitting.

Electrochemical Ammonia Synthesis via NO Reduction on 2D-MOF.

Developing new catalysts that effectively promote electrocatalytic NO reduction (ENOR) is a very important industrial field. A two-dimensional (2D) metal-organic framework (MOF) with hexaaminobenzene (HAB) ligands (TM-HAB MOF, TM=Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Mo, Ru, Rh and Pd) as an electrocatalyst for ENOR was systematically explored in this work by means of well-defined density functional theory (DFT) calculations. We predicted the impact of the coordination structure of different MOFs on its catalytic performance and found that the suitable candidates are Co- and Rh-HAB MOFs due to moderate binding strength between NO and substrates. Further calculations indicated that Co-HAB MOF has the best ENOR catalytic activity with a limiting potential of - 0.26 V toward NH3 production at low NO coverage, yet NO reduction to N2 O at high NO coverage was limited due to high limiting potential. The scaling relationship with a good correlation coefficient between several electronic properties and the adsorption Gibbs free energy change of *NO (ΔG*NO ) were found, which implies that ΔG*NO can be used as a simple descriptor for screening out suitable electrocatalysts. This work offers a new paradigm for ENOR toward NH3 production under ambient conditions.

Facile Melting-Crystallization Synthesis of Cs2NaxAg1-xInCl6: Bi Double Perovskites for White Light-Emitting Diodes.

Lead-free double perovskites (DPs) have outstanding luminescent properties, which make them excellent candidates for wide use in optoelectronics. Herein, a solvent-free melting-crystallization technique, which can produce kilogram-scale DP microcrystals (DP-MCs) in one batch, is invented to synthesize the Cs2NaxAg1-xInCl6: Bi (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) DP-MCs. The structure and composition analysis confirmed the products are pure Cs2NaxAg1-xInCl6 DP-MCs. Affected by Jahn-Teller distortion of AgCl6 octahedra, self-trapped excitons appear in the excited state, resulting in the broadband emission (400-850 nm) of Cs2Ag1-xNaxInCl6: Bi DP-MCs. The enhancement of the photoluminescence quantum yield can be realized by introducing Na+ to break the parity-forbidden transition in the Cs2AgInCl6 DP. Optimized Cs2Na0.4Ag0.6InCl6: Bi DP-MC phosphors combined with commercial blue and green phosphors were coated on ultraviolet chips (365 nm) to fabricate white light-emitting diodes (WLEDs) from warm white (2930 K) to cold white (6957 K). An ultrahigh color rendering index of 97.1 and a CCT of 5548 K as well as Commission Internationale de l'Eclairage color coordinates of (0.331, 0.339) have been demonstrated. This kilogram-scale synthesis technique could stimulate the industrial development of WLEDs for general lighting based on DP-MC phosphors.

First report of apple root rot caused by Phytopythium vexans in China.

Apple production is of great economic importance in the fruit industry of China, where Yunnan Province is considered as a major producing area. A survey was conducted to identify apple trees that were problematic from March to November 2020 in Yunnan Province. Symptoms included smaller yellowing leaves, fewer sprouts per branch, browning and necrosis of the roots and lower parts of the stem bark, and wilting. 20% to 45% of apple trees were found infected and randomly scattered in the surveyed orchards. A total of 110 soil samples were collected from the root area of symptomatic apple trees in Tuanjie Town of Kunming City, Zhaotong City, and Malong District of Qujing City in Yunnan Province. Two grams of each soil sample was suspended in 400 ml of sterile water for three days and each soil extract was baited with two apple leaves (Red Fuji's). Following the baiting, those leaves were cut into 10 pieces (5mm×5mm), surface-sterilized with 70% ethanol for 30 seconds, rinsed three times with sterile water, and then air-dried. Each leaf piece was placed in a Petri dish with the oatmeal agar medium containing PCNB 20 mg/ml, rifampicin 20 mg/ml, and then incubated at 25℃ in the dark for 3 days. A mycelial agar plug was picked from the edge of the colonies and transferred to a fresh Potato Dexrose Agar (PDA) plate. Seventy colonies with similar growing characteristics were isolated from the 110 soil samples. Three isolates were retained for further analysis and named XLD8-1, SD1, and YF2. After being cultivated on PDA plates and incubated at 25℃ in the dark for 4 days, their colonies were rose petal-type and white with dense aerial hyphae (Fig 1, A). In ten days of incubation, oogonium measuring 24.55 ± 1.9µm × 20.27 ± 2.3µm and sporangia measuring 21.65 ± 1.3µm × 19.35 ± 1µm were observed (Fig 1, C, D). The total DNA of the isolates was extracted and amplified using three pairs of primers, ITS1/ITS4 (White et al. 1990), LROR/LR7 (LSU) (Vilgalys R, et al. 1990), and FM58/FM66 (COXⅡ) (Martin F N. 2000). The sequences were uploaded to GenBank (Accession No. OL960234, OK037658, OK052604 for ITS, OL960388, OM838413, OM838314 for LSU, and OM962847, OM962848, OM962849 for COXⅡ). ITS sequences of the three isolates (XLD8-1, SD1, YF2) showed 99.87%,99.87%, 99.87% similar to Pp. vexans (Accession No. AB468784, AB468784, and AM701801). LSU sequences of the three isolates showed 99.92%, 99.72%, 100% similar to Pp. vexans (Accession No. EF426541, MT729990, and EF426541). COXⅡ sequences of the three isolates showed 100%, 99.81%, 99.81% similar to Pp. vexans (Accession No. GU133560). Based on the sequence similarity and morphology, the isolates were identified as Phytopythium vexans. Koch's postulates were conducted by wounding the bases of 3 apple seedlings (1-year-old Red Fuji's) with a cork borer. A plug of mycelium of the isolate XLD8-1 grown on PDA plates was placed on each wound (Fig 1, B). Controls were set up to use sterile agar plugs as an inoculum. Seedlings have incubated an incubator at 23-26°C under the alternating light and dark intervals, 12-hours of each. In 15 days, after were inoculated with XLD8-1 the roots and lower part of the stem bark of those seedlings became brownish and necrotic, and their epidermis was easily sloughed off (Fig 1, E-G). The pathogen isolated from the necrotic root tissues were identical to the isolate XLD8-1. Symptoms of apple growth decline caused by Pp. vexans were reported in Morocco (Jabiri Salma, et al. 2021). This experiment verified that Pp. vexans causes root rot of apple. In China, Fusarium sp. is usually considered the main pathogen causing apple root rot. However, the discovery of large numbers of apple trees that were infected by Pp. vexans in Yunnan Province and the confirmation of pathogenicity of Pp. vexans on apple seedlings have demonstrated for the first time that Pp. vexans could cause apple root rot as Fusarium spp does and become an incoming threat to the apple industry, which lays the foundation for study on the disease epidemiology and integrated management of apple root rot in China. References: Jabiri Salma, et al. 2021. Microorganisms, doi:10.3390/MICROORGANISMS9091916. Martin, F. N. 2000. Mycologia, 92(4), 711-727. Vilgalys R., et al. 1990. Journal of Bacteriology, 172:4238-4246 White, T. J., et al. 1990. PCR Protocols: a guide to methods and applications, 18: 315.