A multilevel electrolyte-gated artificial synapse based on ruthenium-doped cobalt ferrite.

Synaptic devices that emulate synchronized memory and processing are considered the core components of neuromorphic computing systems for the low-power implementation of artificial intelligence. In this regard, electrolyte-gated transistors (EGTs) have gained much scientific attention, having a similar working mechanism as the biological synapses. Moreover, compared to a traditional solid-state gate dielectric, the liquid dielectric has the key advantage of inducing extremely large modulation of carrier density while overcoming the problem of electric pinholes, that typically occurs when using large-area films gated through ultra-thin solid dielectrics. Herein we demonstrate a three-terminal synaptic transistor based on ruthenium-doped cobalt ferrite (CRFO) thin films by electrolyte gating. In the CRFO-based EGT, we have obtained multilevel non-volatile conductance states for analog computing and high-density storage. Furthermore, the proposed synaptic transistor exhibited essential synaptic behavior, including spike amplitude-dependent plasticity, spike duration-dependent plasticity, long-term potentiation, and long-term depression successfully by applying electrical pulses. This study can motivate the development of advanced neuromorphic devices that leverage simultaneous modulation of electrical and magnetic properties in the same device and show a new direction to synaptic electronics.

Chemical Vapor Deposition of Superconducting FeTe1-xSex Nanosheets.

FeTe1-xSex, a promising layered material used to realize Majorana zero modes, has attracted enormous attention in recent years. Pulsed laser deposition (PLD) and molecular-beam epitaxy (MBE) are the routine growth methods used to prepare FeTe1-xSex thin films. However, both methods require high-vacuum conditions and polished crystalline substrates, which hinder the exploration of the topological superconductivity and related nanodevices of this material. Here we demonstrate the growth of the ultrathin FeTe1-xSex superconductor by a facile, atmospheric pressure chemical vapor deposition (CVD) method. The composition and thickness of the two-dimensional (2D) FeTe1-xSex nanosheets are well controlled by tuning the experimental conditions. The as-prepared FeTe0.8Se0.2 nanosheet exhibits an onset superconducting transition temperature of 12.4 K, proving its high quality. Our work offers an effective strategy for preparing the ultrathin FeTe1-xSex superconductor, which could become a promising platform for further study of the unconventional superconductivity in the FeTe1-xSex system.

Giant Third-Order Nonlinear Hall Effect in Misfit Layer Compound (SnS)1.17(NbS2)3.

The nonlinear Hall effect (NLHE) holds immense significance in recognizing the band geometry and its potential applications in current rectification. Recent discoveries have expanded the study from second-order to third-order nonlinear Hall effect (THE), which is governed by an intrinsic band geometric quantity called the Berry Connection Polarizability tensor. Here we demonstrate a giant THE in a misfit layer compound, (SnS)1.17(NbS2)3. While the THE is prohibited in individual NbS2 and SnS due to the constraints imposed by the crystal symmetry and their band structures, a remarkable THE emerges when a superlattice is formed by introducing a monolayer of SnS. The angular-dependent THE and its scaling relationship indicate that the phenomenon could be correlated to the band geometry modulation, concurrently with the symmetry breaking. The resulting strength of THE is orders of magnitude higher compared to recent studies. Our work illuminates the modulation of structural and electronic geometries for novel quantum phenomena through interface engineering.

Electrical Control Grain Dimensionality with Multilevel Magnetic Anisotropy.

In alignment with the increasing demand for larger storage capacity and longer data retention, the electrical control of magnetic anisotropy has been a research focus in the realm of spintronics. Typically, magnetic anisotropy is determined by grain dimensionality, which is set during the fabrication of magnetic thin films. Despite the intrinsic correlation between magnetic anisotropy and grain dimensionality, there is a lack of experimental evidence for electrically controlling grain dimensionality, thereby impairing the efficiency of magnetic anisotropy modulation. Here, we demonstrate an electric field control of grain dimensionality and prove it as the active mechanism for tuning interfacial magnetism. The reduction in grain dimensionality is associated with a transition from ferromagnetic to superparamagnetic behavior. We achieve a nonvolatile and reversible modulation of the coercivity in both the ferromagnetic and superparamagnetic regimes. Subsequent electrical and elemental analysis confirms the variation in grain dimensionality upon the application of gate voltages, revealing a transition from a multidomain to a single-domain state, accompanied by a reduction in grain dimensionality. Furthermore, we exploit the influence of grain dimensionality on domain wall motion, extending its applicability to multilevel magnetic memory and synaptic devices. Our results provide a strategy for tuning interfacial magnetism through grain size engineering for advancements in high-performance spintronics.

Multifunctional Magnetic Oxide-MoS2 Heterostructures on Silicon.

Correlated oxides and related heterostructures are intriguing for developing future multifunctional devices by exploiting their exotic properties, but their integration with other materials, especially on Si-based platforms, is challenging. Here, van der Waals heterostructures of La0.7 Sr0.3 MnO3 (LSMO) , a correlated manganite perovskite, and MoS2 are demonstrated on Si substrates with multiple functions. To overcome the problems due to the incompatible growth process, technologies involving freestanding LSMO membranes and van der Waals force-mediated transfer are used to fabricate the LSMO-MoS2 heterostructures. The LSMO-MoS2 heterostructures exhibit a gate-tunable rectifying behavior, based on which metal-semiconductor field-effect transistors (MESFETs) with on-off ratios of over 104 can be achieved. The LSMO-MoS2 heterostructures can function as photodiodes displaying considerable open-circuit voltages and photocurrents. In addition, the colossal magnetoresistance of LSMO endows the LSMO-MoS2 heterostructures with an electrically tunable magnetoresponse at room temperature. This work not only proves the applicability of the LSMO-MoS2 heterostructure devices on Si-based platform but also demonstrates a paradigm to create multifunctional heterostructures from materials with disparate properties.

Qing-Xin-Jie-Yu Granule for patients with stable coronary artery disease (QUEST Trial): A multicenter, double-blinded, randomized trial.

BACKGROUND AND AIM: Despite optimal secondary preventive treatment, patients with stable coronary artery disease (SCAD) remain at high risk of cardiovascular events. This multicenter, double-blinded, randomized trial sought to determine whether the addition of Qing-Xin-Jie-Yu Granule (QXJYG), a traditional Chinese medicine prescription, to standard therapy would further reduce risk of cardiovascular events in patients with SCAD. METHODS: A total of 1500 patients with documented SCAD were randomly assigned in a 1:1 ratio to QXJYG or placebo for 6 months, and followed up for another 6 months. The primary outcome was a composite of cardiovascular death, nonfatal myocardial infarction (MI) and coronary revascularization. Near the end of the trial, but before unblinding, a commonly used composite 'hard' endpoint composed of cardiovascular death, nonfatal myocardial infarction and ischemic stroke was additionally analyzed. RESULTS: During a median follow-up of 12 months, no significant difference of the primary outcome between the two groups was observed (1.59% vs. 1.62%; hazard ratio, 0.41; 95% CI, 0.13-1.28). However, absolute risk of the composite 'hard' endpoint was reduced by 0.99% (0.31% vs. 1.30%; hazard ratio, 0.06; 95%CI, 0.01 to 0.53). No difference of adverse events between the two groups was observed. CONCLUSION: In patients with SCAD, the addition of QXJYG to standard therapy was associated with reduced risk of nonfatal MI and the composite 'hard' endpoint of cardiovascular death, nonfatal MI and stroke. (http://www.chictr.org.cn/showproj.aspx?proj=5200, ChiCTR-TRC-13004370).

Synthesis and photoelectrocatalytic activity of In2O3 hollow microspheres via a bio-template route using yeast templates.

Indium oxide (In2O3) hollow microspheres were prepared using yeast as a bio-template with the aid of a precipitation method. The yeast provided a solid frame for the deposition of In(OH)3 to form the precursor. The resulting In2O3 hollow microspheres were obtained by calcining the precursor at 650 °C. The samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 adsorption-desorption isotherms and UV-Vis diffuse reflectance spectroscopy. The results showed that the diameter of the In2O3 hollow microspheres was about 2.0-3.0 µm and the spherical shells were composed of In2O3 nanoparticles with a size of ∼20 nm. The BET specific surface area of the sample was 19.23 m2 g-1. The photoelectrocatalytic test results showed that the photoelectrocatalytic degradation efficiency of methylene blue (MB) using In2O3 hollow microspheres as catalysts under visible light irradiation and a certain voltage could reach above 95% after 4 hours, much higher than that of only photodegradation. The enhanced photoelectrocatalytic activity could be attributed to the hydroxyl radicals HO˙ produced by the light irradiation reaction process which could oxidize the electron donors and were beneficial to reducing the recombination of electrons and holes.

2D end-to-end carbon nanotube conductive networks in polymer nanocomposites: a conceptual design to dramatically enhance the sensitivities of strain sensors.

New generation wearable devices require mechanically compliant strain sensors with a high sensitivity in a full detecting range. Herein, novel 2D end-to-end contact conductive networks of multi-walled carbon nanotubes (MWCNTs) were designed and realized in an ethylene-α-octene block copolymer (OBC) matrix. The prepared strain sensor showed a high gauge factor (GF) of 248 even at a small strain (5%) and a linear resistance response throughout the whole strain range. The sensors also exhibited very good stretchability up to 300% and high cycling durability. This novel design solved the intrinsic problem of sensors based on carbon nanotube bundles, i.e., a long sliding phase before the disconnection of CNTs in a cost-effective and scalable way. This study rationalizes the 2D end-to-end contact concept to improve the sensitivity of the existing sensors and has great potential to be used in a wide variety of polymer based sensors.

Qing-Xin-Jie-Yu Granules in addition to conventional treatment for patients with stable coronary artery disease (QUEST Trial): study protocol for a randomized controlled trial.

BACKGROUND: Recurrent cardiovascular event remains high in stable coronary artery disease (SCAD), especially in patients with multiple risk factors, despite a high rate of use conventional treatment. Traditional Chinese Medicine (TCM) is a promising complementary and alternative medicine for treating SCAD, while evidence for its effect on long-term survival is limited. This study was designed to test if Chinese herbal medicine in addition to conventional treatment is more effective than conventional treatment alone in reducing major adverse cardiac event (MACE) for SCAD patients with multiple risk factors during a 1-year follow-up. METHODS: This is a multicenter, placebo-controlled, double-blinded, randomized controlled clinical trial. A total of 1500 patients are randomized in a 1:1 ratio to receive the Qing-Xin-Jie-Yu Granules (QXJYG) or the placebo granules, twice daily for 6 months. The primary outcome is the combined outcomes including cardiac death, nonfatal myocardial infarction and revascularization. The secondary outcome is the combined outcomes including all-cause mortality, re-admission for acute coronary syndrome (ACS), heart failure, malignant supraventricular and ventricular arrhythmia influencing hemodynamics, ischemic stroke, and other thromboembolic events during 1-year follow-up. The assessment is performed at baseline (before randomization), 1, 3, 6, 9, and 12 months after randomization. DISCUSSION: This is the first multicenter trial sponsored by the national funding of China to evaluate TCM in combination with conventional treatment on 1-year survival in high-risk SCAD patients. If successful, it will provide an evidence-based complementary therapeutic approach for reducing MACE from SCAD. TRIAL REGISTRATION: The trial was registered in the Chinese Clinical Trial Registry on December 28, 2013. The registration number is ChiCTR-TRC-13004370 .