Switchable Power Generation in Triboelectric Nanogenerator Toward Chip-Less Wearable Power Module Applications.

A conceptual shift toward next-generation wearable electronics is driving research into self-powered electronics technologies that can be independently operated without plugging into the grid for external power feeding. Triboelectric nanogenerators (TENGs) are emerging as a key component of self-powered electronics, but a power type mismatch between supply and demand limits their direct implementation into wearable self-powered electronics. Here, a TENG with switchable power mode capability is reported where the charge flow direction is modulated over the course of slow and random mechanical stimuli, with exceptional rectification capabilities as high as ≈133, stable outputs over the cycles, and design flexibility in different platforms. Importantly, the remarkable switchable power generation with fabric counter materials illuminates a new path for the smooth integration of flexible TENGs into wearable self-powered electronics.

Si/Organic Integrated Narrowband Near-Infrared Photodetector.

Spectrally selective narrowband photodetection is critical for near-infrared (NIR) imaging applications, such as for communicationand night-vision utilities. It is a long-standing challenge for detectors based on silicon, to achieve narrowband photodetection without integrating any optical filters. Here, this work demonstrates a NIR nanograting Si/organic (PBDBT-DTBT:BTP-4F) heterojunction photodetector (PD), which for the first time obtains the full-width-at-half-maximum (FWHM) of only 26 nm and fast response of 74 µs at 895 nm. The response peak can be successfully tailored from 895 to 977 nm. The sharp and narrow response NIR peak is inherently attributed to the coherent overlapping between the NIR transmission spectrum of organic layer and diffraction enhanced absorption peak of patterned nanograting Si substrates. The finite difference time domain (FDTD) physics calculation confirms the resonant enhancement peaks, which is well consistent with the experiment results. Meanwhile, the relative characterization indicates that the introduction of the organic film can promote carrier transfer and charge collection, facilitating efficient photocurrent generation. This new device design strategy opens up a new window in developing low-cost sensitive NIR narrowband detection.

Hybrid modeling of perovskite light-emitting diodes with nanostructured emissive layers.

Perovskite light-emitting diodes (PeLEDs) have attracted much attention due to their superior performance. When a bottleneck of energy conversion efficiency is achieved with materials engineering, nanostructure incorporation proves to be a feasible approach to further improve device efficiencies via light extraction enhancement. The finite-difference time-domain simulation is widely used for optical analysis of nanostructured optoelectronic devices, but reliable modeling of PeLEDs with nanostructured emissive layers remains unmet due to the difficulty of locating dipole light sources. Herein we established a hybrid process for modeling light emission behaviors of such nanostructured PeLEDs by calibrating light source distribution through electrical simulations. This hybrid modeling method serves as a universal tool for structure optimization of light-emitting diodes with nanostructured emissive layers.

Wafer-scale nanopatterning using fast-reconfigurable and actively-stabilized two-beam fiber-optic interference lithography.

A fast-reconfigurable and actively-stabilized fiber-optic interference lithography system is demonstrated in this paper. Employment of fiber-optic components greatly enhances the flexibility of the whole system, simplifies its optical alignment, and suppresses the interference of mechanical vibrations. Active stabilization is implemented in the system and evaluated through modeling and experiment. We demonstrate 3-inch-diameter wafer-scale patterning of 240-nm-period grating lines with a sub-50-nm linewidth and an aspect ratio over 3. Two-dimensional patterns of different geometries and dimensions are also demonstrated to show the versatility of our system. Step-and-repeat exposure is demonstrated with independently controlled patterning fields of 2×2cm2 large.

High-Performance Flexible Transparent Electrode with an Embedded Metal Mesh Fabricated by Cost-Effective Solution Process.

A new structure of flexible transparent electrodes is reported, featuring a metal mesh fully embedded and mechanically anchored in a flexible substrate, and a cost-effective solution-based fabrication strategy for this new transparent electrode. The embedded nature of the metal-mesh electrodes provides a series of advantages, including surface smoothness that is crucial for device fabrication, mechanical stability under high bending stress, strong adhesion to the substrate with excellent flexibility, and favorable resistance against moisture, oxygen, and chemicals. The novel fabrication process replaces vacuum-based metal deposition with an electrodeposition process and is potentially suitable for high-throughput, large-volume, and low-cost production. In particular, this strategy enables fabrication of a high-aspect-ratio (thickness to linewidth) metal mesh, substantially improving conductivity without considerably sacrificing transparency. Various prototype flexible transparent electrodes are demonstrated with transmittance higher than 90% and sheet resistance below 1 ohm sq(-1) , as well as extremely high figures of merit up to 1.5 × 10(4) , which are among the highest reported values in recent studies. Finally using our embedded metal-mesh electrode, a flexible transparent thin-film heater is demonstrated with a low power density requirement, rapid response time, and a low operating voltage.

Comparison of inducible versus constitutive expression of plectasin on yields and antimicrobial activities in Pichia pastoris.

BACKGROUND: Plectasin might serve as a substitute for traditional antibiotics, but its yields and antimicrobial activities warrant further investigation. OBJECTIVE: To identify the influence of inducible versus constitutive expression of plectasin on yields and antimicrobial activities. METHODS: Through SOE-PCR, a recombinant plectasin gene was generated and inserted into inducible (pPICZαA) and constitutive (pGAPZαA) vectors in order to create Pichia pastoris GS115 strains. After 120 h of fermentation, supernatants were purified by an AKTA purifier using nickel columns. Minimal inhibitory concentration (MIC) and inhibition zone assays were performed after Tricine-SDS-PAGE. RESULTS: After 120 h of fermentation, the yield of constitutive plectasin (370 µg/ml) was much lower than that from inducible vector (880 µg/ml) (P < 0.05). However, constitutive strain reached its plateau phase faster and keep more consistent yield (P < 0.05). The MICs of inducible plectasin against Methicillin-resistant Staphylococcus aureus (MRSA) 15471118, vancomycin-resistant Enterococcus feces (VREF), and penicillin-resistant Streptococcus pneumonia (PRSP) 31355 were 64, 32, and 64 µg/ml, respectively, while those of constitutive plectasin were 4, 4, and 16 µg/ml. No significant differences were observed in antimicrobial activities between inducible and constitutive plectasin for MRSA 15471118, VREF and PRSP 31355 (all P ï¼ž 0.05). However, constitutive plectasin had a larger inhibition zone than inducible plectasin with the same mass. CONCLUSIONS: Although P. pastoris GS115 (pGAPZαA-Plectasin-GS115) had lower expression than P. pastoris GS115 (pPICZαA-plectasin-GS115), it reached the plateau phase faster, had steadier yields and showed superiority in antimicrobial activities. Therefore, pGAPZαA might be more suitable for expression of plectasin in GS115 compared with pPICZαA.

Dispersion engineering of plasmonic nanocomposite for ultrathin broadband optical absorber.

We theoretically study the metal-insulator-metal (MIM) structure based ultrathin broadband optical absorber which consists of a metallic substrate, a dielectric middle layer, and a nanostructured metallic top layer. It is found that, there exists an effective permittivity, εnull, for the top nanostructured metallic layer which leads to unit-absorption (zero-reflection) of the MIM structure. Importantly, this εnull exhibits abnormal dispersion behaviors. Both its real and imaginary parts increase monotonically with the wavelength. To obtain such naturally non-existing permittivity, we investigate the optical properties of two typical types of metal-dielectric nanocomposites, namely, thoroughly mingled composites using Bruggeman's effective medium theory, and more realistic Au nanosphere-in-dielectric structures using numerical permittivity retrieval techniques. We demonstrate that the εnull-type dispersions, and consequently, perfect absorption can be obtained over a broad spectral range when the filling factor of the metal component is close to the percolation threshold. The result not only explains the recently reported broadband absorbers made of randomly deposited Au nanoparticles [M. K. Hedayati, et al, Adv. Mater. 23, 5410 (2011)], but also provides theoretical guidelines for designing ultrathin broadband plasmonic absorbers for a wealthy of important applications.

Nanoimprint-induced strain engineering of two-dimensional materials.

The high stretchability of two-dimensional (2D) materials has facilitated the possibility of using external strain to manipulate their properties. Hence, strain engineering has emerged as a promising technique for tailoring the performance of 2D materials by controlling the applied elastic strain field. Although various types of strain engineering methods have been proposed, deterministic and controllable generation of the strain in 2D materials remains a challenging task. Here, we report a nanoimprint-induced strain engineering (NISE) strategy for introducing controllable periodic strain profiles on 2D materials. A three-dimensional (3D) tunable strain is generated in a molybdenum disulfide (MoS2) sheet by pressing and conforming to the topography of an imprint mold. Different strain profiles generated in MoS2 are demonstrated and verified by Raman and photoluminescence (PL) spectroscopy. The strain modulation capability of NISE is investigated by changing the imprint pressure and the patterns of the imprint molds, which enables precise control of the strain magnitudes and distributions in MoS2. Furthermore, a finite element model is developed to simulate the NISE process and reveal the straining behavior of MoS2. This deterministic and effective strain engineering technique can be easily extended to other materials and is also compatible with common semiconductor fabrication processes; therefore, it provides prospects for advances in broad nanoelectronic and optoelectronic devices.

Double transfer UV-curing nanoimprint lithography.

A challenge in the fabrication of nanostructures into non-planar substrates is to form a thin, uniform resist film on non-planar surfaces. This is critical to the fabrication of nanostructures via a lithographic technique due to the subsequent pattern transfer process. Here we report a new double transfer UV-curing nanoimprint technique that can create a nanopatterned thin film with a uniform residual layer not only on flat substrates but also on highly curved surfaces. Surface relief gratings with pitches down to 200 nm are successfully imprinted on the cylindrical surface of optical fibers, and further transferred into a SiO2 matrix using reactive ion etching (RIE), demonstrating that our technique is applicable for fabricating high-resolution nanostructures on non-planar substrates.

Metallic Micro-Nano Network-Based Soft Transparent Electrodes: Materials, Processes, and Applications.

Soft transparent electrodes (TEs) have received tremendous interest from academia and industry due to the rapid development of lightweight, transparent soft electronics. Metallic micro-nano networks (MMNNs) are a class of promising soft TEs that exhibit excellent optical and electrical properties, including low sheet resistance and high optical transmittance, as well as superior mechanical properties such as softness, robustness, and desirable stability. They are genuinely interesting alternatives to conventional conductive metal oxides, which are expensive to fabricate and have limited flexibility on soft surfaces. This review summarizes state-of-the-art research developments in MMNN-based soft TEs in terms of performance specifications, fabrication methods, and application areas. The review describes the implementation of MMNN-based soft TEs in optoelectronics, bioelectronics, tactile sensors, energy storage devices, and other applications. Finally, it presents a perspective on the technical difficulties and potential future possibilities for MMNN-based TE development.

Unraveling Size-Dependent Ion-Migration for Stable Mixed-Halide Perovskite Light-Emitting Diodes.

Mixed-halide perovskites show tunable emission wavelength across the visible-light range, with optimum control of the light color. However, color stability remains limited due to the notorious halide segregation under illumination or an electric field. Here, a versatile path toward high-quality mixed-halide perovskites with high emission properties and resistance to halide segregation is presented. Through systematic in and ex situ characterizations, key features for this advancement are proposed: a slowed and controllable crystallization process can promote achievement of halide homogeneity, which in turn ensures thermodynamic stability; meanwhile, downsizing perovskite nanoparticle to nanometer-scale dimensions can enhance their resistance to external stimuli, strengthening the phase stability. Leveraging this strategy, devices are developed based on CsPbCl1.5 Br1.5 perovskite that achieves a champion external quantum efficiency (EQE) of 9.8% at 464 nm, making it one of the most efficient deep-blue mixed-halide perovskite light-emitting diodes (PeLEDs) to date. Particularly, the device demonstrates excellent spectral stability, maintaining a constant emission profile and position for over 60 min of continuous operation. The versatility of this approach with CsPbBr1.5 I1.5 PeLEDs is further showcased, achieving an impressive EQE of 12.7% at 576 nm.

High-fidelity and clean nanotransfer lithography using structure-embedded and electrostatic-adhesive carriers.

Metallic nanostructures are becoming increasingly important for both fundamental research and practical devices. Many emerging applications employing metallic nanostructures often involve unconventional substrates that are flexible or nonplanar, making direct lithographic fabrication very difficult. An alternative approach is to transfer prefabricated structures from a conventional substrate; however, it is still challenging to maintain high fidelity and a high yield in the transfer process. In this paper, we propose a high-fidelity, clean nanotransfer lithography method that addresses the above challenges by employing a polyvinyl acetate (PVA) film as the transferring carrier and promoting electrostatic adhesion through triboelectric charging. The PVA film embeds the transferred metallic nanostructures and maintains their spacing with a remarkably low variation of <1%. When separating the PVA film from the donor substrate, electrostatic charges are generated due to triboelectric charging and facilitate adhesion to the receiver substrate, resulting in a high large-area transfer yield of up to 99.93%. We successfully transferred the metallic structures of a variety of materials (Au, Cu, Pd, etc.) with different geometries with a <50-nm spacing, high aspect ratio (>2), and complex 3D structures. Moreover, the thin and flexible carrier film enables transfer on highly curved surfaces, such as a single-mode optical fiber with a curvature radius of 62.5 µm. With this strategy, we demonstrate the transfer of metallic nanostructures for a compact spectrometer with Cu nanogratings transferred on a convex lens and for surface-enhanced Raman spectroscopy (SERS) characterization on graphene with reliable responsiveness.

Electrochemical Replication and Transfer for Low-Cost, Sub-100 nm Patterning of Materials on Flexible Substrates.

The fabrication of high-resolution patterns on flexible substrates is an essential step in the development of flexible electronics. However, the patterning process on flexible substrates often requires expensive equipment and tedious lithographic processing. Here, a bottom-up patterning technique, termed electrochemical replication and transfer (ERT) is reported, which fabricates multiscale patterns of a wide variety of materials by selective electrodeposition of target materials on a predefined template, and subsequent transfer of the electrodeposited materials to a flexible substrate, while leaving the undamaged template for reuse for over 100 times. The additive and parallel patterning attribute of ERT allows the fabrication of multiscale patterns with resolutions spanning from sub-100 nm to many centimeters simultaneously, which overcomes the trade-off between resolution and throughput of conventional patterning techniques. ERT is suitable for fabricating a wide variety of materials including metals, semiconductors, metal oxides, and polymers into arbitrary shapes on flexible substrates at a very low cost.

Nanoscale negative-tone quantized patterning by novel selective electrochemical etching of a nanoimprinted sub-200 nm bimetallic tile array.

Quantum lithography (QL) is a revolutionary approach to significantly increase the throughput and lower the cost of electron beam lithography in writing large-area masks with nanoscale features. A major challenge in QL is that its principle can be readily applied to positive- but not negative-tone QL. In fact, negative-tone QL, which is as indispensable as positive-tone QL in practical usage, has not been achieved. Here we propose a new method to overcome the obstacle, and report the first experimental demonstration of negative-tone QL. The new method uses a new type of nanoimprinted blank with the nanoscale tiles made of an aluminum/chromium bi-layer of metals, and a novel electrochemical process that removes only non-tagged quantized tiles of the new blank while keeping tagged ones. The demonstrated negative-tone QL has a 200 nm pitch and 30 nm gap and can be further scaled down to even smaller pitch sizes.

Giant and uniform fluorescence enhancement over large areas using plasmonic nanodots in 3D resonant cavity nanoantenna by nanoimprinting.

Using a new nanoplasmonic architecture and an optimized spacer, we observed the following: (a) the average fluorescence of an infrared dye (indocyanine green) is enhanced by 2970 fold uniformly (variation < 11%) over a large sample area and over a wide range of dye concentrations (380 to 380,000 molecule µm(-2)), laser excitation powers and laser beam sizes; and (b) for a single molecule placed at a 'hot spot', the fluorescence enhancement is 4.5 × 10(6) fold. The giant and uniform enhancements (orders of magnitude higher than before), plus easy and inexpensive large area fabrication ( > 4″ wafers), should open up wide applications.

Spatial modulation of nanopattern dimensions by combining interference lithography and grayscale-patterned secondary exposure.

Functional nanostructures are exploited for a variety of cutting-edge fields including plasmonics, metasurfaces, and biosensors, just to name a few. Some applications require nanostructures with uniform feature sizes while others rely on spatially varying morphologies. However, fine manipulation of the feature size over a large area remains a substantial challenge because mainstream approaches to precise nanopatterning are based on low-throughput pixel-by-pixel processing, such as those utilizing focused beams of photons, electrons, or ions. In this work, we provide a solution toward wafer-scale, arbitrary modulation of feature size distribution by introducing a lithographic portfolio combining interference lithography (IL) and grayscale-patterned secondary exposure (SE). Employed after the high-throughput IL, a SE with patterned intensity distribution spatially modulates the dimensions of photoresist nanostructures. Based on this approach, we successfully fabricated 4-inch wafer-scale nanogratings with uniform linewidths of <5% variation, using grayscale-patterned SE to compensate for the linewidth difference caused by the Gaussian distribution of the laser beams in the IL. Besides, we also demonstrated a wafer-scale structural color painting by spatially modulating the filling ratio to achieve gradient grayscale color using SE.

Extraordinary light transmission through opaque thin metal film with subwavelength holes blocked by metal disks.

We observed that when subwavelength-sized holes in an optically opaque metal film are completely covered by opaque metal disks larger than the holes, the light transmission through the holes is not reduced, but rather enhanced. Particularly we report (i) the observation of light transmission through the holes blocked by the metal disks up to 70% larger than the unblocked holes; (ii) the observation of tuning the light transmission by varying the coupling strength between the blocking disks and the hole array, or by changing the size of the disks and holes; (iii) the observation and simulation that the metal disk blocker can improve light coupling from free space to a subwavelength hole; and (iv) the simulation that shows the light transmission through subwavelength holes can be enhanced, even though the gap between the disk and the metal film is partially connected with a metal. We believe these finding should have broad and significant impacts and applications to optical systems in many fields.

Three-dimensional cavity nanoantenna coupled plasmonic nanodots for ultrahigh and uniform surface-enhanced Raman scattering over large area.

We propose and demonstrate a new SERS substrate architecture that couples a dense three-dimensional (3-D) cavity nanoantenna array, through nano-gaps, with dense plasmonic nanodots; and a new nanofabrication that combines nanoimprint, guided self-assembly and self-alignment and has fabricated the architecture precisely, simply, inexpensively and over large area (4-inch wafer). We experimentally achieved not only high area-average SERS enhancement (1.2×109) but also excellent uniformity (22.4% variation) at the same time over the entire large-area sample by measuring 90 points with a regular mapping distance. The best uniformity achieved is 15% variation over 1.6 mm by 1.6 mm area at slightly lower enhancement factor and is independent of the excitation laser probe size, which had an area varying from ~1 to 10,000 µm2.

Printing of sub-20 nm wide graphene ribbon arrays using nanoimprinted graphite stamps and electrostatic force assisted bonding.

Nano-graphene ribbons are promising in many electronic applications, as their bandgaps can be opened by reducing the widths, e.g. below 20 nm. However, a high-throughput method to pattern large-area nano-graphene features is still not available. Here we report a fabrication method of sub-20 nm ribbons on graphite stamps by nanoimprint lithography and a transfer-printing of the graphene ribbons to a Si wafer using electrostatic force assisted bonding. These methods provide a path for fast and high-throughput nano-graphene device production.

Ultrasensitive Molecular Detection by Imaging of Centimeter-Scale Metasurfaces with a Deterministic Gradient Geometry.

Highly sensitive detection of trace amounts of substances is crucial for broad applications in healthcare, environmental monitoring, antiterrorism, etc., where cost effectiveness and portability are often demanded. Here, an ultrasensitive sensor is reported that can detect an angstrom-thick layer of adsorbed molecules through image acquisition and processing. The sensor features a centimeter-scale plasmonic metasurface with spatially varying geometry, where the light scattering is dependent on both the adsorbed substances and spatial locations. When illuminated with narrowband light (such as from a light emitting diode), the intensity pattern recorded on the metasurface changes with the surface-adsorbed molecules, enabling label-free, sensitive, and spectrometer-free molecular detection. The centimeter-scale size of the sensing area interfaces well with consumer-level imaging sensors on mobile devices without the need for microscopic optics and offers a high signal-to-noise ratio by leveraging the multimillion pixels for noise reduction. It is experimentally demonstrated that a single layer of Al2 O3 molecules deposited on the sensor, with a thickness of approximately one angstrom, can be detected by analyzing the images taken of the sensing chip. Furthermore, by integrating the sensor into a microfluidic setup, quantitative detection of BSA/anti-BSA immune complex formation events is demonstrated, which agrees well with the Langmuir isotherm model.