RESUMO
By means of numerical simulations, using a computational fluid dynamics software together with an optical ray tracing analysis platform, we show that we can tune various optical aberrations by electrically manipulating the shape of liquid lenses using one hundred individually addressable electrodes. To demonstrate the flexibility of our design, we define electrode patterns based on specific Zernike modes and show that aspherical, cylindrical and decentered shapes of liquid lenses can be produced. Using different voltages, we evaluate the tuning range of spherical aberration (Z11), astigmatism (Z5 and Z6) and coma (Z7), while a hydrostatic pressure is applied to control the average curvature of a microlens with a diameter of 1mm. Upon activating all electrodes simultaneously spherical aberrations of 0.15 waves at a pressure of 30Pa can be suppressed almost completely for the highest voltages applied. For astigmatic and comatic patterns, the values of Z5, Z6 and Z7 increase monotonically with the voltage reaching values up to 0.06, 0.06 and 0.2 waves, respectively. Spot diagrams, wavefront maps and modulation transfer function are reported to quantify the optical performance of each lens. Crosstalk and independence of tunability are discussed in the context of possible applications of the approach for general wavefront shaping.
RESUMO
We propose a new design for tuning the astigmatism of liquid micro-lenses using electric field and hydrostatic pressure as control parameters. We explore the feasibility and operating range of the lens with a self-consistent numerical calculation of the electric field distribution and the shape of the two-phase interface. Equilibrium shapes, including surface profiles parallel and perpendicular to a stripe electrode, are extracted to determine the astigmatism. The wavefronts are decomposed into Zernike polynomials under zero defocus conditions using a commercial ray-tracing software. We observe that the global curvature of the lens is primarily controlled by the hydrostatic pressure, while asphericity and astigmatism are controlled by the electric field. For optimized electrode geometries and simultaneous control of pressure and electric fields the astigmatism can be tuned from Z6 = 0 0.38 µm with minor changes in the focal length.
RESUMO
Streptococcus pneumoniae is one of the primary pathogens that are associated with acute respiratory infections (ARI) that cause high rates of morbidity and mortality among children under five years of age in developed and developing countries. This study aimed to determine the prevalence of nasopharyngeal colonization, the antimicrobial resistance profile, and the capacity for biofilm formation by S. pneumoniae isolated from children aged 0-6 years with ARI throughout the Porto Velho-RO. A total of 660 swabs were collected from children with ARI. Molecular and biochemical tests were performed to characterize the isolates. The disk-difusion method and the E-test were used for antimicrobial sensitivity testing (TSA). Biofilm formation capacity was assessed using microtiter plate assays, and serotype detection was acheived using polymerase chain reaction (PCR) analyses. The colonization rate for S. pneumoniae was 8.9% (59/660) and exhibited a high prevalence in children under 23 months of age 64.4% (38/59). The observed serotypes were 9V and 19F with frequencies of 1.7% (1/59) and 13.6% (8/59), respectively. The antimicrobial susceptibility test revealed 100% (59/59) sensitivity to vancomycin. In contrast, trimethoprim and oxacillin exhibited high resistance rates of 76.3% (45/59) and 52.5% (31/59), respectively. Of the biofilm-forming isolates, 54.8% (23/42) possessed resistance to some antimicrobials. In this study, S. pneumoniae showed high rates of antimicrobial resistance and the ability to form biofilms, as these are factors that favor bacterial persistence and can cause serious damage to the host.