Simvastatin Attenuates Areca Nut Extract-Induced Subdermal Fibrosis in Mice by Targeting TGF-ß Signaling Pathways.

Oral submucous fibrosis (OSMF) is a chronic inflammatory disease and a potentially malignant oral disorder, characterized by fibrosis of the oral mucosa. TGF-ß signaling pathways have been implicated in the development of OSMF, with areca nut extract (ANE) contributing to the disease progression. Simvastatin, a statin drug, has demonstrated anti-fibrotic properties in various fibrotic conditions. However, its therapeutic potential in treating OSMF remains unclear. In this study, 8-week-old male BALB/c mice were randomly divided into three groups based on different time points. Each mouse was then treated with four different drug formulations. Post-treatment, specimens were collected for histopathological examination and staining to assess skin thickness, fibrosis, and collagen deposition. ANE treatment alone significantly increased skin thickness and collagen deposition compared to the control group after the 4-week time point. The combined administration of ANE and simvastatin, resulted in a notable reduction in skin thickness and collagen deposition. Western blot analysis revealed that simvastatin effectively suppressed the expression of fibrosis-related proteins, including CTGF, and α-SMA, in ANE-induced subdermal fibrosis. These results suggest that simvastatin has potential therapeutic effects on ANE-induced subdermal fibrosis, providing a foundation for future studies and possible clinical applications.

Operationally defining physical literacy in Chinese culture: Results of a meta-narrative synthesis and the Panel's recommendations.

Purpose: The definition of physical literacy (PL) needs to be explored by researchers from educational, public health, and sports organisations in Chinese culture; an adequate definition and theoretical framework of PL can then be embraced within different contexts and according to cultural influences. Methods: This meta-narrative synthesis of literature in this area included a series of planning, search, mapping, appraisal, synthesis, and recommendation phases. The literature was translated into English and circulated among international experts to seek suggestions. A total of 74 articles were included in the PL definition synthesis and 28 were included for philosophical synthesis in this study. Results: Based on three rounds of discussions, the final agreement was reached among panel members regarding the defining statements and practical and theoretical models of PL in Chinese culture. According to consensus, PL is the integration of physical, perceptual, cognitive, psychological, and behavioural capabilities, echoing with the need for an active, healthy, and fulfilling lifestyle, which involves continuous positive interactions with the environment and embodied engagement in physical activities for life. The framework addressed five domains (physical, sensory-perceptual, cognitive, psychological, and behavioural) and one important overlapping factor (dynamic environment). A further explanation was provided in the defining statement to assist in understanding the concept. Conclusion: It is suggested that the cultural interpretation and historical background of PL in Chinese discourse should be addressed and respected. The development of a specific cultural definition statement of PL in one country could provide implications for PL researchers worldwide.

Genomic and transcriptomic comparison of nucleotide variations for insights into bruchid resistance of mungbean (Vigna radiata [L.] R. Wilczek).

BACKGROUND: Mungbean (Vigna radiata [L.] R. Wilczek) is an important legume crop with high nutritional value in South and Southeast Asia. The crop plant is susceptible to a storage pest caused by bruchids (Callosobruchus spp.). Some wild and cultivated mungbean accessions show resistance to bruchids. Genomic and transcriptomic comparison of bruchid-resistant and -susceptible mungbean could reveal bruchid-resistant genes (Br) for this pest and give insights into the bruchid resistance of mungbean. RESULTS: Flow cytometry showed that the genome size varied by 61 Mb (mega base pairs) among the tested mungbean accessions. Next generation sequencing followed by de novo assembly of the genome of the bruchid-resistant recombinant inbred line 59 (RIL59) revealed more than 42,000 genes. Transcriptomic comparison of bruchid-resistant and -susceptible parental lines and their offspring identified 91 differentially expressed genes (DEGs) classified into 17 major and 74 minor bruchid-resistance-associated genes. We found 408 nucleotide variations (NVs) between bruchid-resistant and -susceptible lines in regions spanning 2 kb (kilo base pairs) of the promoters of 68 DEGs. Furthermore, 282 NVs were identified on exons of 148 sequence-changed-protein genes (SCPs). DEGs and SCPs comprised genes involved in resistant-related, transposable elements (TEs) and conserved metabolic pathways. A large number of these genes were mapped to a region on chromosome 5. Molecular markers designed for variants of putative bruchid-resistance-associated genes were highly diagnostic for the bruchid-resistant genotype. CONCLUSIONS: In addition to identifying bruchid-resistance-associated genes, we found that conserved metabolism and TEs may be modifier factors for bruchid resistance of mungbean. The genome sequence of a bruchid-resistant inbred line, candidate genes and sequence variations in promoter regions and exons putatively conditioning resistance as well as markers detecting these variants could be used for development of bruchid-resistant mungbean varieties.

Traveling by Private Motorized Vehicle and Physical Fitness in Taiwanese Adults.

BACKGROUND: Although the time spent sitting in motorized vehicles has been determined to be adversely associated with cardiometabolic health, its association with other health indicators remains unclear. PURPOSE: This study examined associations between traveling by private motorized vehicle and 4 indicators of physical fitness in adults. METHOD: Data from 52,114 Taiwanese adults aged 20 to 65 years who participated in the 2013 National Adults Fitness Survey were used. The examined variables were height, body mass, and performance in modified sit-and-reach (flexibility), bent-leg sit-up (abdominal muscular strength and endurance), and a 3-min step test (cardiorespiratory endurance). Participants were asked on how many days they had used a private car or motorcycle for traveling from place to place and categorized as non-, occasional, and daily private motorized vehicle travelers. Logistic and linear regression models were used to examine associations between the categories of using private motorized vehicles to travel and physical fitness performance. RESULTS: After an adjustment for potential demographic and behavioral confounders, daily traveling by private motorized vehicle was associated with a higher probability of overweight (odds ratio = 1.18), lower performance of abdominal muscular strength and endurance (-0.37 times/min), and lower cardiorespiratory fitness (-0.60 physical fitness index) than was traveling that did not involve private motorized vehicles. CONCLUSION: The results suggest that in addition to unfavorable cardiorespiratory fitness and a risk of overweight, daily traveling by private motorized vehicle is associated with poor performance in abdominal muscular strength and endurance.

Reverse Torque Value of Angulated Screw Channel Abutment before and after Cyclic Loading: An In Vitro Study.

This in vitro experiment aimed to understand the difference in preload acting on an abutment screw under different angles of angulated screw-retained crown and the performance after cyclic loading. In total, thirty implants with angulated screw channel (ASC) abutments were divided into two parts. The first part consisted of three groups: a 0° access channel with a zirconia crown (ASC-0) (n = 5), a 15° access channel with a specially designed zirconia crown (sASC-15) (n = 5), and a 25° access channel with a specially designed zirconia crown (sASC-25) (n = 5). The reverse torque value (RTV) was measured at 0° for each specimen. The second part consisted of three groups: a 0° access channel with a zirconia crown (ASC-0) (n = 5); a 15° access channel with a zirconia crown (ASC-15) (n = 5), and a 25° access channel with a zirconia crown (ASC-25) (n = 5). The manufacturer's recommended torque was applied to each specimen, and baseline RTV was measured before cyclic loading. Each ASC implant assembly was cyclically loaded at 0 to 40 N with 1 million cycles at 10 Hz. RTV was measured after cyclic loading. Kruskal-Wallis test and Jonckheere-Terpstra test were used for statistical analysis. All specimens were examined under a digital microscope and scanning electron microscope (SEM) to observe the wear of the screw head before and after the whole experiment. A significant difference in the different percentages of straight RTV (sRTV) between the three groups was found (p = 0.027). The angle of ASC to the different percentages of sRTV showed a significant linear trend (p = 0.003). No significant differences were found in RTV difference after cyclic loading among the ASC-0, ASC-15, and ASC-25 groups (p = 0.212). The ASC-25 group had the most serious degree of wear based on a digital microscope and SEM examination. The ASC angle will affect the actual preload acting on a screw: the larger the ASC angle, the smaller the preload. The performance of the angled ASC groups in RTV difference was comparable to that of 0° ASC after cyclic loading.

Effect of Marginal Bone Integrity and Aftermarket Abutment Screws on Dental Implant Systems-A Preliminary Study with Finite Element Method.

Bone resorption around implants is quite common, and the maturity and popularization of computer-aided design and computer-aided manufacturing (CAD/CAM) technology have made the use of aftermarket abutment screws more widespread. This study aimed to explore the biomechanical influence of these two common factors on the internal stress of an implant system using three-dimensional finite element analysis (3D FEA). The FEA results indicated that under the same loading conditions, the use of an aftermarket screw had the greatest impact on the screw itself among the three components of the implant system, while the maximum stress increased by 6.3% and 10.5% in the bone integrity and bone loss models, respectively. Moreover, the marginal bone loss models had the greatest impact on the implant fixture, with a maximum stress increase of 51.8% on average. Evidently, the influence of bone loss might be far greater than that of the aftermarket screw; however, any factor could be enough to cause clinical failure. Therefore, we should pay more attention to the maintenance of the long-term peri-implant marginal bone integrity.

A Retrospective Analysis of Implants with Low Insertion Torque in Immediately Loaded Full-Arch Fixed Prostheses with Corresponding Occlusal Schemes.

PURPOSE: Poor alveolar bone quality and quantity may cause low insertion torque during implant placement; therefore, a delicate occlusal design is important for the immediate loading procedure. This retrospective clinical study aimed to investigate (1) the proportion of implants with a low insertion torque between the maxilla and mandible, (2) factors affecting implants with a low insertion torque, and (3) survival rates of implants with a low insertion torque value (< 35 Ncm) using different occlusal designs with full-arch fixed prostheses supported by immediately loaded implants. MATERIALS AND METHODS: Between 2013 and 2017, patients who received full-arch reconstructions were treated with immediately loaded one-piece fixed prostheses supported by four to six implants. Full-arch fixed prostheses with at least one immediately loaded regular implant with a low insertion torque value were included in this study. The fixed provisional acrylic prosthesis with a rigid framework was delivered within 3 to 5 days after surgery. According to the distribution of implants with low insertion torque, provisional prostheses were divided into three groups with different occlusal schemes. Definitive prostheses were fabricated after 3 months of loading. RESULTS: A total of 144 patients were treated; 608 and 304 regular implants were inserted in 118 maxillae and 76 mandibles, respectively. Moreover, 42 patients (11 men and 31 women) with 39 maxillae and 4 mandibles were included in this study. The proportion of implants with low insertion torque values in the maxilla was significantly greater than that in the mandible (10.5% vs 1.6%, respectively, P < .001). Implant length and low insertion torque value had no significant correlation (P = .948). Implants with a 3.3-mm diameter (narrow platform) had a greater proportion of low insertion torque values than 4-mm-wide implants (P = .002). Implants placed in a fresh socket had a greater proportion of insertion torque values ≥ 35 Ncm (P = .023). The overall cumulative implant survival rate was 98.6%. Groups 1, 2, and 3 had 14, 23, and 6 provisional prostheses, respectively. The survival rates for implants with insertion torque values < 35 Ncm and ≥ 35 Ncm were 98.4% and 98.7%, respectively, and were not significantly different (P = .866). All prostheses were still functioning during the mean follow-up of 3.7 ± 1.2 years. CONCLUSION: The high cumulative implant survival rate indicated that implants with a low insertion torque in immediately loaded full-arch provisional prostheses did not jeopardize the outcomes after a corresponding occlusal scheme was used.

Effects of Marginal Bone Loss Progression on Stress Distribution in Different Implant-Abutment Connections and Abutment Materials: A 3D Finite Element Analysis Study.

Peri-implantitis is a common implant-supported prosthesis complication, and marginal bone loss affects the stress distribution in implant systems. This three-dimensional finite element analysis study investigated how bone loss affects the implant assembly; in particular, models including two implant systems with different connection systems (external or internal hexagon), abutment materials (titanium or zirconia), and bone loss levels (0, 1.5, 3, or 5 mm) were created. We observed that the maximum von Mises stress distinctly increased in the groups with bone loss over 1.5 mm compared to the group without bone loss, regardless of the connection system or abutment material used. Moreover, the screw stress patterns with bone loss progression were determined more by the connection systems than by the abutment materials, and the magnitude of the stress on the fixture was affected by the connection systems with a similar pattern. The highest stress on the screw with the external hexagon connection system increased over 25% when bone loss increased from 3 to 5 mm, exceeding the yield strength of the titanium alloy (Ti-6Al-4V) when 5 mm bone loss exists; clinically, this situation may result in screw loosening or fracture. The highest stress on the fixture, exceeding the yield strength of pure titanium, was noted with the internal hexagon connection system and 1.5 mm bone loss. Titanium and zirconia abutments-both of which are clinically durable-presented similar screw and fixture stress patterns. Therefore, clinicians should pay more attention to maintaining the peri-implant bone to achieve the long-term stability of the implant-supported prosthesis.

Editing site analysis in a gymnosperm mitochondrial genome reveals similarities with angiosperm mitochondrial genomes.

Sequence analysis of organelle genomes and comprehensive analysis of C-to-U editing sites from flowering and non-flowering plants have provided extensive sequence information from diverse taxa. This study includes the first comprehensive analysis of RNA editing sites from a gymnosperm mitochondrial genome, and utilizes informatics analyses to determine conserved features in the RNA sequence context around editing sites. We have identified 565 editing sites in 21 full-length and 4 partial cDNAs of the 39 protein-coding genes identified from the mitochondrial genome of Cycas taitungensis. The information profiles and RNA sequence context of C-to-U editing sites in the Cycas genome exhibit similarity in the immediate flanking nucleotides. Relative entropy analyses indicate that similar regions in the 5' flanking 20 nucleotides have information content compared to angiosperm mitochondrial genomes. These results suggest that evolutionary constraints exist on the nucleotide sequences immediately adjacent to C-to-U editing sites, and similar regions are utilized in editing site recognition.

Evolution of reduced and compact chloroplast genomes (cpDNAs) in gnetophytes: selection toward a lower-cost strategy.

The cpDNA of Welwitschia mirabilis (the only species of Welwitschiales) was recently reported to be the most reduced and compact among photosynthetic land plants. However, cpDNAs of the other two gnetophyte lineages (viz. Ephedrales and Gnetales) have not yet been studied. It remains unclear what underlining mechanisms have downsized the cpDNA. To pin down major factors for cpDNA reduction and compaction in gnetophytes, we have determined 4 complete cpDNAs, including one from each of the 3 gnetophyte orders, Ephedra equisetina, Gnetum parvifolium, and W. mirabilis, and one from the non-Pinus Pinaceae, Keteleeria davidiana. We report that the cpDNAs of E. equisetina (109,518bp) and G.parvifolium (114,914bp) are not only smaller but more compact than that of W. mirabilis (118,919bp). The gnetophyte cpDNAs have commonly lost at least 18 genes that are retained in other seed plants. Furthermore, they have significantly biased usages of AT-rich codons and shorter introns and intergenic spaces, which are largely due to more deletions at inter-operon than intra-operon spaces and removal of segment sequences rather than single-nucleotides. We show that the reduced gnetophyte cpDNAs clearly resulted from selection for economy by deletions of genes and non-coding sequences, which then led to the compactness and the accelerated substitution rates. The smallest C-values in gnetophyte nuclear DNAs and the competitive or resource-poor situations encountered by gnetophytes further suggest a critical need for an economic strategy.

Computed tomographic analysis of maxillary sinus anatomy relevant to sinus lift procedures in edentulous ridges in Taiwanese patients.

PURPOSE: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). METHODS: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. RESULTS: The average ridge width was 10.26±3.16 mm, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was 8.55±4.09 mm, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was 2.08±0.94 mm, with no significant difference between the tooth position and lateral wall thickness. CONCLUSIONS: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.

The complete mitochondrial genome of wild mung bean (Vigna radiata var. sublobata TC1966).

The entire mitogenome of wild mung bean (Vigna radiata var. sublobata TC1966) was identified as a circular molecule of 402,981 bp length. The wild mung bean mitogenome encoded 3 rRNAs, 16 tRNAs, and 33 proteins. A phylogenetic tree was reconstructed using the 18 protein-coding genes of 14 legumes and one close species, Ricinus communis. Our phylogenetic analysis suggests that the wild mung bean clustered with the Vigna radiata var. radiata, as well as, the species of Vigna and Glycine appeared as a monophyletic group. This complete mitogenome sequence provides a genomic resource for further studies in mung bean breeding and domestication.

The complete chloroplast genome of agarwood producing species, Aquilaria sinensis (Lour.) Gilg: a species on IUCN red list.

The entire chloroplast genome of Aquilaria sinensis (Lour.) Gilg was identified as a circular molecule of 174,885 bp length with a typical tetrad structure, including a pair of inverted repeats (42,103 bp each), a large single copy (87,331 bp) and a small single copy (3,348 bp) regions. The A. sinensis cp genome encoded 8 rRNAs, 39 tRNAs, and 90 proteins. A phylogenetic tree was reconstructed using the 43 protein-coding genes of eight Thymelaeaceae. Two other Malvales, Abelmoschus esculentus and Durio zibethinus, were selected as the outgroup. Our phylogenetic analysis suggests that the five examined species of Aquilaria appeared a monophyletic group with robust support.

Comparative Mouse Genomics Centers Consortium: the Mouse Genotype Database.

The Comparative Mouse Genomics Centers Consortium (CMGCC) is a branch of the Environmental Genome Project sponsored by the National Institute of Environmental Health Sciences (NIEHS) focusing upon the identification of human single nucleotide polymorphisms (SNPs) that may confer disease susceptibility within the human population. The goal of the CMGCC (http://www.niehs.nih.gov/cmgcc/) is to make genetic mouse models for human SNPs within cell cycle control, DNA replication and DNA repair genes that may be associated with human pathologies. In order to facilitate information sharing and analysis within the consortium a set of informatics resources have been generated to support the mouse model development efforts. The primary entry point for information about the mouse models developed by the consortium is through the CMGCC Genotype Database (http://mrages.niehs.nih.gov/genotype/), which maintains both a consortium specific and public access display of the available and developing mouse models.

Implementing partnership-driven clinical federated electronic health record data sharing networks.

OBJECTIVE: Building federated data sharing architectures requires supporting a range of data owners, effective and validated semantic alignment between data resources, and consistent focus on end-users. Establishing these resources requires development methodologies that support internal validation of data extraction and translation processes, sustaining meaningful partnerships, and delivering clear and measurable system utility. We describe findings from two federated data sharing case examples that detail critical factors, shared outcomes, and production environment results. METHODS: Two federated data sharing pilot architectures developed to support network-based research associated with the University of Washington's Institute of Translational Health Sciences provided the basis for the findings. A spiral model for implementation and evaluation was used to structure iterations of development and support knowledge share between the two network development teams, which cross collaborated to support and manage common stages. RESULTS: We found that using a spiral model of software development and multiple cycles of iteration was effective in achieving early network design goals. Both networks required time and resource intensive efforts to establish a trusted environment to create the data sharing architectures. Both networks were challenged by the need for adaptive use cases to define and test utility. CONCLUSION: An iterative cyclical model of development provided a process for developing trust with data partners and refining the design, and supported measureable success in the development of new federated data sharing architectures.

Revisiting the Plastid Phylogenomics of Pinaceae with Two Complete Plastomes of Pseudolarix and Tsuga.

Phylogeny of the ten Pinaceous genera has long been contentious. Plastid genomes (plastomes) provide an opportunity to resolve this problem because they contain rich evolutionary information. To comprehend the plastid phylogenomics of all ten Pinaceous genera, we sequenced the plastomes of two previously unavailable genera, Pseudolarix amabilis (122,234 bp) and Tsuga chinensis (120,859 bp). Both plastomes share similar gene repertoire and order. Here for the first time we report a unique insertion of tandem repeats in accD of T. chinensis From the 65 plastid protein-coding genes common to all Pinaceous genera, we re-examined the phylogenetic relationship among all Pinaceous genera. Our two phylogenetic trees are congruent in an identical tree topology, with the five genera of the Abietoideae subfamily constituting a monophyletic clade separate from the other three subfamilies: Pinoideae, Piceoideae, and Laricoideae. The five genera of Abietoideae were grouped into two sister clades consisting of (1) Cedrus alone and (2) two sister subclades of Pseudolarix-Tsuga and Abies-Keteleeria, with the former uniquely losing the gene psaM and the latter specifically excluding the 3 psbA from the residual inverted repeat.

The complete mitochondrial genome of mungbean Vigna radiata var. radiata NM92 and a phylogenetic analysis of crops in angiosperms.

The entire mitogenome of the Vigna radiata var. radiata NM92 was identified as a circular molecule of 401 262 bp length (DDBJ accession number: AP014716). The contents of A, T, C, and G in the NM92 mitogenome were found to be 27.48%, 27.41%, 22.63%, and 22.48%, respectively. The NM92 mitogenome encoded 3 rRNAs, 16 tRNAs and 33 proteins. Eight protein-coding genes (nad1, nad2, nad4, nad5, nad7, rps3, and rps10) centain introns. Among them, three (nad1, nad2, and nad5) are trans-spliced genes. A phylogenetic tree was reconstructed using the 21 protein-coding genes of 16 crops. A species of gymnosperms, Cycas, was selected as the outgroup. This complete mitogenome sequence provides useful information to understand the cultivation of Vigna radiata and other crops.

A pilot study to validate a standardized one-week salt estimation method evaluating salt intake and its sources for family members in China.

The objective of this study was to develop a new method named the "one-week salt estimation method" that could estimate an individual's salt intake and the sources of salt in the diet, and to evaluate this new method with a 24-h urine collection. The new method estimates salt intake from: (1) household cooking by weighing the family salt container and other high-salt condiments or sauces at the beginning and end of a week; (2) processed food according to established China food composition figures; and (3) cafeteria or restaurant meals using the results of previous studies. Consumption of salt additives and major salt contained foods and salt intake related eating habits were collected using a structured simple seven-day questionnaire. In order to validate the method, we studied 37 individuals from 11 families using the new method and 26 of these participants collected seven concurrent 24-h urine samples. The average salt intake for the 26 participants was 15.6±5.5 g/person/day (mean±standard deviation) by the 24-h urine collection and 13.7±6.5 g/person/day by the new method. The difference was 1.8±4.2 g/day/person (p=0.037). The Pearson correlation coefficient was 0.762 (p<0.001) and the partial correlation coefficient was 0.771 (p<0.001) when adjusted for family code. Bland-Altman Plot showed the average of the difference between the two methods was -1.83, with 95% limits of -10.1 to 6.5 g/person/day. The new method showed that 43.7% of salt intake came from household cooking (33.5% from cooking salt, 10.2% from other condiments and sauces), 12.9% from processed food, and 43.4% from eating out. In conclusion, despite its limitations of underestimating salt intake, the "one-week salt estimation method" is easier for people to implement and is likely to provide useful information that highlights the excessively high intake of salt and its sources, and in turn is helpful in guiding dietary salt reduction.

School based education programme to reduce salt intake in children and their families (School-EduSalt): cluster randomised controlled trial.

OBJECTIVE: To determine whether an education programme targeted at schoolchildren could lower salt intake in children and their families. DESIGN: Cluster randomised controlled trial, with schools randomly assigned to either the intervention or control group. SETTING: 28 primary schools in urban Changzhi, northern China. PARTICIPANTS: 279 children in grade 5 of primary school, with mean age of 10.1; 553 adult family members (mean age 43.8). INTERVENTION: Children in the intervention group were educated on the harmful effects of salt and how to reduce salt intake within the schools' usual health education lessons. Children then delivered the salt reduction message to their families. The intervention lasted for one school term (about 3.5 months). MAIN OUTCOME MEASURES: The primary outcome was the difference between the groups in the change in salt intake (as measured by 24 hour urinary sodium excretion) from baseline to the end of the trial. The secondary outcome was the difference between the two groups in the change in blood pressure. RESULTS: At baseline, the mean salt intake in children was 7.3 (SE 0.3) g/day in the intervention group and 6.8 (SE 0.3) g/day in the control group. In adult family members the salt intakes were 12.6 (SE 0.4) and 11.3 (SE 0.4) g/day, respectively. During the study there was a reduction in salt intake in the intervention group, whereas in the control group salt intake increased. The mean effect on salt intake for intervention versus control group was -1.9 g/day (95% confidence interval -2.6 to -1.3 g/day; P<0.001) in children and -2.9 g/day (-3.7 to -2.2 g/day; P<0.001) in adults. The mean effect on systolic blood pressure was -0.8 mm Hg (-3.0 to 1.5 mm Hg; P=0.51) in children and -2.3 mm Hg (-4.5 to -0.04 mm Hg; P<0.05) in adults. CONCLUSIONS: An education programme delivered to primary school children as part of the usual curriculum is effective in lowering salt intake in children and their families. This offers a novel and important approach to reducing salt intake in a population in which most of the salt in the diet is added by consumers.Trial registration ClinicalTrials.gov NCT01821144. .

Transcriptional Slippage and RNA Editing Increase the Diversity of Transcripts in Chloroplasts: Insight from Deep Sequencing of Vigna radiata Genome and Transcriptome.

We performed deep sequencing of the nuclear and organellar genomes of three mungbean genotypes: Vigna radiata ssp. sublobata TC1966, V. radiata var. radiata NM92 and the recombinant inbred line RIL59 derived from a cross between TC1966 and NM92. Moreover, we performed deep sequencing of the RIL59 transcriptome to investigate transcript variability. The mungbean chloroplast genome has a quadripartite structure including a pair of inverted repeats separated by two single copy regions. A total of 213 simple sequence repeats were identified in the chloroplast genomes of NM92 and RIL59; 78 single nucleotide variants and nine indels were discovered in comparing the chloroplast genomes of TC1966 and NM92. Analysis of the mungbean chloroplast transcriptome revealed mRNAs that were affected by transcriptional slippage and RNA editing. Transcriptional slippage frequency was positively correlated with the length of simple sequence repeats of the mungbean chloroplast genome (R2=0.9911). In total, 41 C-to-U editing sites were found in 23 chloroplast genes and in one intergenic spacer. No editing site that swapped U to C was found. A combination of bioinformatics and experimental methods revealed that the plastid-encoded RNA polymerase-transcribed genes psbF and ndhA are affected by transcriptional slippage in mungbean and in main lineages of land plants, including three dicots (Glycine max, Brassica rapa, and Nicotiana tabacum), two monocots (Oryza sativa and Zea mays), two gymnosperms (Pinus taeda and Ginkgo biloba) and one moss (Physcomitrella patens). Transcript analysis of the rps2 gene showed that transcriptional slippage could affect transcripts at single sequence repeat regions with poly-A runs. It showed that transcriptional slippage together with incomplete RNA editing may cause sequence diversity of transcripts in chloroplasts of land plants.