RESUMO
In the study of Early Pleistocene stone artifacts, researchers have made considerable progress in reconstructing the technical decisions of hominins by examining various aspects of lithic technology, such as reduction sequences, hammer selection, platform preparation, core management, and raw material selection. By comparison, our understanding of the ways in which Early Pleistocene hominins controlled the delivery and application of percussive force during flaking remains limited. In this study, we focus on a key aspect of force delivery in stone knapping, namely the hammerstone striking angle (or the angle of blow), which has been shown to play a significant role in determining the knapping outcome. Using a dataset consists of 12 Early Pleistocene flake assemblages dated from 1.95 Ma to 1.4 Ma, we examined temporal patterns of the hammer striking angle by quantifying the bulb angle, a property of the flake's Hertzian cone that reflects the hammer striking angle used in flake production. We further included a Middle Paleolithic flake assemblage as a point of comparison from a later time period. In the Early Pleistocene dataset, we observed an increased association between the bulb angle and other flake variables related to flake size over time, a pattern similarly found in the Middle Paleolithic assemblage. These findings suggest that, towards the Oldowan-Acheulean transition, hominins began to systematically adjust the hammer striking angle in accordance with platform variables to detach flakes of different sizes more effectively, implying the development of a more comprehensive understanding of the role of the angle of blow in flake formation by â¼1.5 Ma.
RESUMO
One of the greatest difficulties with evolutionary approaches in the study of stone tools (lithics) has been finding a mechanism for tying culture and biology in a way that preserves human agency and operates at scales that are visible in the archaeological record. The concept of niche construction, whereby organisms actively construct their environments and change the conditions for selection, could provide a solution to this problem. In this review, we evaluate the utility of niche construction theory (NCT) for stone tool archaeology. We apply NCT to lithics both as part of the "extended phenotype" and as residuals or precipitates of other niche-constructing activities, suggesting ways in which archaeologists can employ niche construction feedbacks to generate testable hypotheses about stone tool use. Finally, we conclude that, as far as its applicability to lithic archaeology, NCT compares favorably to other prominent evolutionary approaches, such as human behavioral ecology and dual-inheritance theory.
Assuntos
Evolução Biológica , Evolução Cultural , Ecossistema , Comportamento de Utilização de Ferramentas , Animais , Arqueologia , Hominidae , Humanos , TecnologiaRESUMO
North Africa is quickly emerging as one of the more important regions yielding information on the origins of modern Homo sapiens. Associated with significant fossil hominin remains are two stone tool industries, the Aterian and Mousterian, which have been differentiated, respectively, primarily on the basis of the presence and absence of tanged, or stemmed, stone tools. Largely because of historical reasons, these two industries have been attributed to the western Eurasian Middle Paleolithic rather than the African Middle Stone Age. In this paper, drawing on our recent excavation of Contrebandiers Cave and other published data, we show that, aside from the presence or absence of tanged pieces, there are no other distinctions between these two industries in terms of either lithic attributes or chronology. Together, these results demonstrate that these two 'industries' are instead variants of the same entity. Moreover, several additional characteristics of these assemblages, such as distinctive stone implements and the manufacture and use of bone tools and possible shell ornaments, suggest a closer affinity to other Late Pleistocene African Middle Stone Age industries rather than to the Middle Paleolithic of western Eurasia.
Assuntos
Fósseis , Tecnologia/história , África do Norte , Animais , Antropologia Física , História Antiga , Hominidae , Tecnologia/instrumentaçãoRESUMO
Contrasting with the predominance of blade-based assemblages in the Eurasian Upper Paleolithic, the large-scale persistence of a core-and-flake technology remains one of the defining features of Late Pleistocene lithic technology in East Asia. In North China, Shuidonggou is an exceptional site where both technologies are documented, therefore, it is an important archaeological sequence to understand regional technological evolution during the Marine Isotopic Stage 3. Blade technology first occurred at Shuidonggou Locality 1 and 2 around 41 ka cal BP while core-and-flake assemblages were widespread in North China. However, systematic technological studies on assemblages postdating 34 ka cal BP have not been conducted to examine whether the blade technology appeared and disappeared over a short yet abrupt episode, or persists and integrates into other forms in the region. Here, we conducted qualitative and quantitative analyses to reconstruct lithic productions on the assemblages at Shuidonggou Locality 2, dated after 34 ka cal BP. Our results show that there is a total absence of laminar elements in stone artifacts dated to 34-28 ka cal BP at Shuidonggou. Instead, we observe a dominance of an expedient production of flakes in the younger assemblages, illustrating a rapid return to flake-based technology after a relatively brief episode of stone blade production. Combining archaeological, environmental, and genetic evidence, we suggest that this technological 'reversal' from blades back to core and flake technology reflect population dynamics and adaptive strategies at an ecological interface between East Asian winter and summer monsoon.
Assuntos
Arqueologia , Hominidae , Animais , Artefatos , China , Ásia Oriental , Fósseis , TecnologiaRESUMO
To understand the ways in which past stone knappers controlled the morphology of the flakes they produced, archaeologists have focused on examining the effects of striking platform attributes on flake size and shape. Among the variables commonly considered, platform width has routinely been noted to correlate with flake size and hence used to explain past knapping behaviors. Yet, the influence of platform width on flake variation remains equivocal due to the fact that the attribute is not under the direct control of the knapper. Instead, platform width tends to be treated as a by-product of other independent knapping parameters, such as platform depth. In this study, we hypothesize that platform width acts as an intermediary that intervenes the effect of other independent variables on flake attributes. By analyzing experimental flakes produced under both controlled and replicative settings, the results support the hypothesis that platform width mediates the effect of platform depth on flake width, such that flakes with relatively larger platform widths are generally wider but no longer. This finding provides a way to incorporate platform width into discussions of the interrelationships among knapping variables, and highlights the importance of platform width for investigating how past knappers controlled flake production through platform manipulation.
Assuntos
Arqueologia , HumanosRESUMO
The peopling of Sahul (the combined continent of Australia and New Guinea) represents the earliest continental migration and settlement event of solely anatomically modern humans, but its patterns and ecological drivers remain largely conceptual in the current literature. We present an advanced stochastic-ecological model to test the relative support for scenarios describing where and when the first humans entered Sahul, and their most probable routes of early settlement. The model supports a dominant entry via the northwest Sahul Shelf first, potentially followed by a second entry through New Guinea, with initial entry most consistent with 50,000 or 75,000 years ago based on comparison with bias-corrected archaeological map layers. The model's emergent properties predict that peopling of the entire continent occurred rapidly across all ecological environments within 156-208 human generations (4368-5599 years) and at a plausible rate of 0.71-0.92 km year-1. More broadly, our methods and approaches can readily inform other global migration debates, with results supporting an exit of anatomically modern humans from Africa 63,000-90,000 years ago, and the peopling of Eurasia in as little as 12,000-15,000 years via inland routes.
RESUMO
The site of Shuidonggou Locality 2 offers important evidence for the Late Paleolithic sequence of north China. The site not only contains one of the earliest instances of ornamental freshwater shell and ostrich eggshell beads in the region, but also stone artifacts with features arguably resembling the Initial Upper Paleolithic (IUP) blade technology found farther north. The appearance of these innovative archaeological forms have been attributed to the arrival of hominin populations, possibly modern humans, into the region during Marine Isotope Stage 3. Yet, the chronology of the site remains debated due to ambiguities in the existing dates. In this study, we conduct a systematical radiocarbon analysis of charcoal and ostrich eggshell samples obtained throughout the site sequence. Both acid-base-acid and the more stringent acid-base-oxidation pretreatment methods were applied to the charcoal samples. The resulting ages follow an age-depth relationship that is consistent with the stratigraphic profile. In line with previous stratigraphic assessments, Bayesian age modeling suggests that site formation history can be split into two phases: an early phase 43-35 cal kBP associated with a lacustrine depositional environment, and a later phase 35-28 cal kBP associated with rapid terrestrial silt accumulation. The chronology of the archaeological layers containing IUP-like artifacts are placed at 43-39 cal kBP and 35-34 cal kBP respectively. This finding supports the interpretation that an IUP-like blade technology appeared in the SDG region by at least ~41 ka.
Assuntos
Arqueologia , Tecnologia/história , Animais , Teorema de Bayes , Carvão Vegetal/química , China , Casca de Ovo/química , Fósseis , História Antiga , Hominidae , Humanos , Datação RadiométricaRESUMO
In the version of this Article originally published, the authors mistakenly included duplicate entries in the flake datasets for the new Pech de l'Azé IV and Warwasi collections, resulting in minor errors in the statistical analysis. The authors have now repeated this analysis with the correct flake datasets. As a result, in the following two sentences, the number of flakes has been changed from 19,000 to 18,000: "Using more than 18,000 flakes from 81 assemblages spanning two million years..." and "We applied a comparative approach...on more that 18,000 complete and unmodified flakes." In addition, in Figs. 1-3 and Supplementary Fig. 1, some of the data points for the Pech de l'Azé IV and Warwasi collections have moved; the original and corrected figures are below. Supplementary Tables 1 and 2 have been updated to reflect the corrected statistics, and datasets 'Flake_data' and 'Summary_data' have been replaced with the corrected data files. Furthermore, the data availability statement has been updated with the text "Open access to these data and the R code generated for this study is provided at https://zenodo.org/record/1408081#.W6iyn84zaHs ". The authors would like to thank L. Premo at Washington State University for finding the duplicate entries in the published flake dataset.
RESUMO
Temporal variability in flaking stone has been used as one of the currencies for hominin behavioural and biological evolution. This variability is usually traced through changes in artefact forms and techniques of production, resulting overall in unilineal and normative models of hominin adaptation. Here, we focus on the fundamental purpose of flaking stone-the production of a sharp working edge-and model this behaviour over evolutionary time to reassess the evolutionary efficiency of stone tool technology. Using more than 19,000 flakes from 81 assemblages spanning two million years, we show that greater production of sharp edges was followed by increased variability in this behaviour. We propose that a diachronic increase in this variability was related to a higher intensity of interrelations between different behaviours involving the use and management of stone resources that gave fitness advantages in particular environmental contexts. The long-term trends identified in this study inform us that the evolutionary efficiency of stone tool technology was not inherently in advanced tool forms and production techniques, but emerged within the contingencies of hominin interaction with local environments.