Investigating the anti-bioadhesion properties of short, medium chain length, and amphiphilic polyhydroxyalkanoate films.

Silicone materials are widely used in fouling release coatings, but developing eco-friendly protection via biosourced coatings, such as polyhydroxyalcanoates (PHA) presents a major challenge. Anti-bioadhesion properties of medium chain length PHA and short chain length PHA films are studied and compared with a reference Polydimethylsiloxane coating. The results highlight the best capability of the soft and low-roughness PHA-mcl films to resist bacteria or diatoms adsorption as compared to neat PDMS and PHBHV coatings. These parameters are insufficient to explain all the results and other properties related to PHA crystallinity are discussed. Moreover, the addition of a low amount of PEG copolymers within the coatings, to create amphiphilic coatings, boosts their anti-adhesive properties. This work reveals the importance of the physical or chemical ambiguity of surfaces in their anti-adhesive effectiveness and highlights the potential of PHA-mcl film to resist the primary adhesion of microorganisms.

Anti-Biofilm Activity of a Hyaluronan-like Exopolysaccharide from the Marine Vibrio MO245 against Pathogenic Bacteria.

Biofilms, responsible for many serious drawbacks in the medical and marine environment, can grow on abiotic and biotic surfaces. Commercial anti-biofilm solutions, based on the use of biocides, are available but their use increases the risk of antibiotic resistance and environmental pollution in marine industries. There is an urgent need to work on the development of ecofriendly solutions, formulated without biocidal agents, that rely on the anti-adhesive physico-chemical properties of their materials. In this context, exopolysaccharides (EPSs) are natural biopolymers with complex properties than may be used as anti-adhesive agents. This study is focused on the effect of the EPS MO245, a hyaluronic acid-like polysaccharide, on the growth, adhesion, biofilm maturation, and dispersion of two pathogenic model strains, Pseudomonas aeruginosa sp. PaO1 and Vibrio harveyi DSM19623. Our results demonstrated that MO245 may limit biofilm formation, with a biofilm inhibition between 20 and 50%, without any biocidal activity. Since EPSs have no significant impact on the bacterial motility and quorum sensing factors, our results indicate that physico-chemical interactions between the bacteria and the surfaces are modified due to the presence of an adsorbed EPS layer acting as a non-adsorbing layer.

Assessment of the global toxicity of marine sediments from the Dakar peninsula (Senegal, West Africa).

Marine pollution in West Africa is major threat particularly around coastal megacities. We assess the chemical and ecotoxicological quality of the marine sediments in various submerged sampling sites of Dakar. Analysis revealed that sediments were slightly basic in which fine and coarse sands predominated. High percentages of total organic carbon were found sometime above 6%. Higher levels of heavy metal were reported than in previous studies. Chromium and nickel were above the Probable Effect Concentration. Low trophic level appeared not affected by the overall toxicity, while medium trophic level was more affected. Indeed, the vast majority (91%) of sites studied revealed a net percentage of Magallana gigas embryolarval developmental abnormality over 20%. The assessment of the global toxicity of marine sediments from the Dakar sites Studied (n = 11) seemed, almost, as a whole, to be in a poor ecotoxicological state calling to take measures to improve the sanitary condition of this marine feature.

Temperate and tropical coastal waters share relatively similar microbial biofilm communities while free-living or particle-attached communities are distinct.

Free-living (FL) marine microbial communities differ from those attached to particles (PA). Likewise, biofilms (B) colonizing artificial surfaces, including plastics or ship hulls, hardly resemble their planktonic surroundings. However, few studies have examined the effect of the environment on these lifestyles and on the source of organisms colonizing marine surfaces. Using 16S rRNA gene metabarcoding, we identified specificities of marine prokaryotic community lifestyles (FL, PA or B) sampled in three coastal polluted locations with dissimilar environmental conditions: the North-Western Mediterranean Sea and the Atlantic and Indian Oceans. Biofilms developed over polyvinyl chloride (PVC) were found to be significantly different from FL or PA collected during the immersions. Alpha-diversity increased from FL to PA and to B, illustrating the integrative aspect of the latter, with little proportion of operational taxonomic units shared with the first two. Beta-diversity clustered first the lifestyles and then the sites. FL and PA were more affected by water quality, especially by trace metal contamination, whereas B were as sensitive to trace metals as to nutrients. Although biofilms should be supplied by the planktonic (ultra) rare biosphere, source tracking could only detect small contributions of FL or PA taxa to B communities.

Additives for Efficient Biodegradable Antifouling Paints.

The evolution of regulations concerning biocidal products aims to increase protection of the environment (e.g., EU Regulation No 528/2012) and requires the development of new non-toxic anti-fouling (AF) systems. The development of these formulations implies the use of ingredients (polymers, active substances, additives) that are devoid of toxicity towards marine environments. In this context, the use of erodable antifouling paints based on biodegradable polymer and authorized biocides responds to this problem. However, the efficiency of paints could be improved by the use of specific additives. For this purpose, three additives acting as surface modifiers were studied (Tween 80, Span 85 and PEG-silane). Their effects on parameters involved in antifouling efficiency as hydrophobicity, hydration and copper release were studied. Results showed that the addition of 3% of additives modulated hydrophobicity and hydration without an increase of copper release and significantly reduced microfouling development. Efficient paints based on biodegradable polymer and with no organic biocide could be obtained by mixing copper thiocyanate and additives.

Anti-Bacterial Adhesion Activity of Tropical Microalgae Extracts.

The evolution of regulations concerning biocidal products aimed towards an increased protection of the environment (e.g., EU Regulation No 528/2012) requires the development of new non-toxic anti-fouling (AF) systems. As the marine environment is an important source of inspiration, such AF systems inhibiting the adhesion of organisms without any toxicity could be based on molecules of natural origin. In this context, the antibiofilm potential of tropical microalgal extracts was investigated. The tropics are particularly interesting in terms of solar energy and temperatures which provide a wide marine diversity and a high production of microalgae. Twenty microalgal strains isolated from the Indian Ocean were studied. Their extracts were characterized in terms of global chemical composition by high resolution magic angle spinning (HR-MAS) and nuclear magnetic resonance (NMR) spectroscopy, toxicity against marine bacteria (viability and growth) and anti-adhesion effect. The different observations made by confocal laser scanning microscopy (CLSM) showed a significant activity of three extracts from Dinoflagellate strains against the settlement of selected marine bacteria without any toxicity at a concentration of 50 µg/mL. The Symbiodinium sp. (P-78) extract inhibited the adhesion of Bacillus sp. 4J6 (Atlantic Ocean), Shewanella sp. MVV1 (Indian Ocean) and Pseudoalteromonas lipolytica TC8 (Mediterranean Ocean) at 60, 76 and 52%, respectively. These results underlined the potential of using microalgal extracts to repel fouling organisms.

Sponge-Inspired Dibromohemibastadin Prevents and Disrupts Bacterial Biofilms without Toxicity.

Since the banning of several families of compounds in antifouling (AF) coatings, the search for environmentally friendly AF compounds has intensified. Natural sources of AF compounds have been identified in marine organisms and can be used to create analogues in laboratory. In a previous study, we identified that dibromohemibastadin-1 (DBHB) is a promising AF molecule, leading to the inhibition of the activity of phenoloxidase, an enzyme involved in the attachment of mussels to surfaces. This paper describes the activity of the DBHB on biofilm formation and its detachment and on bacterial adhesion and communication: quorum sensing. DBHB has an anti-biofilm activity without affecting adhesion of marine and terrestrial bacteria at a dose of 10 µM. Moreover, DBHB activity on quorum sensing (QS) is demonstrated at doses of 8 and 16 µM. The activity of DBHB on QS is compared to kojic acid, a quorum sensing inhibitor already described. This compound is a promising environmentally friendly molecule potentially useful for the inhibition of microfouling.

Anti-Biofilm Effect of Biodegradable Coatings Based on Hemibastadin Derivative in Marine Environment.

Dibromohemibastadin-1 (DBHB) is an already known potent inhibitor of blue mussel phenoloxidase (which is a key enzyme involved in bioadhesion). Within this study, the potentiality of DBHB against microfouling has been investigated. The activity of DBHB was evaluated on key strains of bacteria and microalgae involved in marine biofilm formation and bioassays assessing impact on growth, adhesion and biofilm formation were used. To assess the efficiency of DBHB when included in a matrix, DBHB varnish was prepared and the anti-microfouling activity of coatings was assessed. Both in vitro and in situ immersions were carried out. Confocal Laser Scanning Microscopy (CLSM) was principally used to determine the biovolume and average thickness of biofilms developed on the coatings. Results showed an evident efficiency of DBHB as compound and varnish to reduce the biofilm development. The mode of action seems to be based principally on a perturbation of biofilm formation rather than on a biocidal activity in the tested conditions.

Bacteria and diatom resistance of silicones modified with PEO-silane amphiphiles.

Silicone coatings with enhanced antifouling behavior towards bacteria, diatoms, and a diatom dominated slime were prepared by incorporating PEO-silane amphiphiles with varied siloxane tether lengths (a-c): α-(EtO)3Si(CH2)2-oligodimethylsiloxanen-block-poly(ethylene oxide)8-OCH3 [n = 0 (a), 4 (b), and 13 (c)]. Three modified silicone coatings (A-C) were prepared by the acid-catalyzed sol-gel cross-linking of a-c, respectively, each with a stoichiometric 2:3 M ratio of α, ω-bis(Si-OH)polydimethylsiloxane (Mn = 3,000 g mol(-1)). The coatings were exposed to the marine bacterium Bacillus sp.416 and the diatom (microalga) Cylindrotheca closterium, as well as a mixed community of Bacillus sp. and C. closterium. In addition, in situ microfouling was assessed by maintaining the coatings in the Atlantic Ocean. Under all test conditions, biofouling was reduced to the highest extent on coating C which was prepared with the PEO-silane amphiphile having the longest siloxane tether length (c).

Effect of biofilm age on settlement of Mytilus edulis.

Biofilm ageing is commonly assumed to improve mussel settlement on artificial substrata, but the structure and taxonomic composition of biofilms remains unclear. In the present study, multi-species biofilms were characterized at different ages (1, 2, and 3 weeks) and their influence on settlement of the blue mussel, Mytilus edulis, was tested in the field. As biofilms can constitute a consistent food resource for larvae, the lipid quality, defined as the proportion of related essential fatty acids, may be a selection criterion for settlement. Overall mussel settlement increased on biofilms older than 1 week, and the enhanced settlement corresponded to the abundance and composition of the biofilm community, rather than to essential fatty acid levels. However, during a pulse of phytoplankton, the positive influence of biofilm was not detected, suggesting that pelagic cues overwhelmed those associated with biofilms. The influence of biofilms on mussel settlement could be more crucial when planktonic resources are limited.

The sigma factor AlgU plays a key role in formation of robust biofilms by nonmucoid Pseudomonas aeruginosa.

The extracytoplasmic function sigma factor AlgU of Pseudomonas aeruginosa is responsible for alginate overproduction, leading to mucoidy and chronic infections of cystic fibrosis patients. We investigated here the role of AlgU in the formation of nonmucoid biofilms. The algU mutant of P. aeruginosa PAO1 (PAOU) showed a dramatic impairment in biofilm formation under dynamic conditions. PAOU was defective both in cell attachment to glass and in development of robust, shear-resistant biofilms. This was explained by an impaired production of extracellular matrix, specifically of the exopolysaccharide Psl, as revealed by microscopy and enzyme-linked immunosorbent assay. Complementing the algU mutation with a plasmid-borne algU gene restored wild-type phenotypes. Compared with that in PAO1, expression of the psl operon was reduced in the PAOU strain, and the biofilm formation ability of this strain was partially restored by inducing the transcription of the psl operon. Furthermore, expression of the lectin-encoding lecA and lecB genes was reduced in the PAOU strain. In agreement with the requirement of LecB for type IV pilus biogenesis, PAOU displayed impaired twitching motility. Collectively, these genetic downregulation events explain the biofilm formation defect of the PAOU mutant. Promoter mapping indicated that AlgU is probably not directly responsible for transcription of the psl operon and the lec genes, but AlgU is involved in the expression of the ppyR gene, whose product was reported to positively control psl expression. Expressing the ppyR gene in PAOU partially restored the formation of robust biofilms.

Booster biocides and microfouling.

Antifouling (AF) paints are used to prevent the attachment of living organisms to the submerged surfaces of ships, boats and aquatic structures, usually by the release of biocides. Apart from copper, organic booster biocides are the main active components in AF paints, but their use can have a negative impact on the marine environment. The direct effects of biocides on marine bacteria are poorly known. This work investigates the impact of two biocides, viz. diuron and tolylfluanid, on the growth and the viability of marine microorganisms and on their ability to form biofilms. The biocides in solution were found to inhibit growth of two strains of marine bacteria, viz. Pseudoalteromonas and Vibrio vulnificus, at a high concentration (1000 microg ml(-1)), but only a small effect on viability was observed. Confocal laser scanning microscopy (CLSM) showed that the booster biocides decreased biofilm formation by both bacteria. At a concentration of 10 microg ml(-1), the biocides inhibited cell attachment and reduced biofilm thickness on glass surfaces. The percentage of live cells in the biofilms was also reduced. The effect of the biocides on two diatoms, Fragilaria pinnata and Cylindrotheca closterium, was also evaluated in terms of growth rate, biomass, chlorophyll a content and attachment to glass. The results demonstrate that diuron and tolylfluanid are more active against diatoms than bacteria.

Pseudomonas aeruginosa resistance of monosaccharide-functionalized glass surfaces.

Preventing microorganism colonization on a surface is a great challenge in the conception of medical, food and marine devices. Here, we describe the formation of carbohydrate functionalized glass surfaces with D-glucose, D-galactose and D-mannose and how they efficiently affected the bacterial attachment. The carbohydrate entities were covalently attached to the pre-functionalized surface by click chemistry thanks the copper catalysed alkyl-azide cycloaddition. Water contact angle and X-ray photoelectron spectroscopy characterisations showed a homogeneous and quantitative cycloaddition at the scale of microorganisms. The adhesion assays with Pseudomonas aeruginosa, used as model of opportunistic pathogen, indicated a significant diminution of almost 40% of the bacterial accumulation on glycosidic surfaces with respect to initial surface. This activity was further compared with a surface presenting a simple hydroxyl residue. Exploration of specific interactions through Lectin A deficient Pseudomonas aeruginosa mutant strain provided new evidences that Lectin A was involved in biofilm maturation, rather than bacterial attachment. Subsequently, the determination of surface free energy and the adhesion free energy between surfaces and bacterial cell wall showed that the adhesion was thermodynamically unfavourable.

Non-Leachable Hydrophilic Additives for Amphiphilic Coatings.

Amphiphilic surfaces are particularly effective at inhibiting the adhesion of microorganisms (bacteria, cells, microalgae, etc.) in liquid media. The aim of this study is to determine the best hydrophilic linker to promote bonding between poly(ethylene glycol) (PEG) as a hydrophilic additive and poly(dimethyl siloxane) (PDMS) as the hydrophobic matrix. Various parameters have been studied (molecular weight, linker type, and polymer end-group), as well as the efficiency of the linking, the capacity of PEG to access to the surface of the film, and overall film homogeneity. According to the results, a PDMS linker paired with a PEG moiety allows for compatibilization of the compounds during cross-linking. This compatibilization seems to provide a good bonding with the matrix and a good surface access to the hydrophilic moiety. Therefore, this structure comprising a linking function attached to the PDMS⁻PEG copolymer has high potential as a non-releasable additive for amphiphilic coating applications.

Influence of Biodegradable Polymer Properties on Antifouling Paints Activity.

The development of new antifouling paints requires understanding the parameters involved in antifouling activity and to develop new analytical tools for their evaluation. A series of biodegradable poly(ε-caprolactone-co-δ-valerolactone) copolymers varying by molecular weight and composition were synthesized, characterized and formulated as antifouling paints. The physico-chemical properties such as hydration, degradation, erosion and lixiviation of paints were studied. Microfouling (bacteria and microalgae) was observed by microscopic observations in a short delay, whereas macrofouling colonization was observed by visual inspection during one year. The antifouling activity of paints was modified by varying the composition and molecular weight of copolymer. The crystallinity appears to play a major role in antifouling activity, however the involvement of other properties such as hydration, degradation or erosion remains difficult to understand. Confocal laser scanning and scanning electron microscopes were used for the evaluation of antifouling paints. Results show that microalgae seem to be a pertinent indicator of antifouling activity.

Rapid identification of osmolytes in tropical microalgae and cyanobacteria by (1)H HR-MAS NMR spectroscopy.

In this study, we report the chemical characterization of 47 tropical microalgae and cyanobacteria by HR-MAS. The generated data confirm the interest of HR-MAS as a rapid screening technique with the major advantage of its easiness. The sample is used as powder of freeze-dried microalgae without any extraction process before acquisition. The spectral fingerprints of strains are then tested as variables for a chemotaxonomy study to discriminate cyanobacteria and dinoflagellates. The individual factor map generated by PCA analysis succeeds in separating the two groups, essentially thanks to the presence of specific carbohydrates. Furthermore, more resolved signals enable to identify many osmolytes. More precisely the characteristics δ of 2-O-alpha-D-glucosylglycerol (GG) are observed in all 21 h-MAS spectra of tropical cyanobacteria. After specific extraction, complementary analysis by 1D and 2D-NMR spectroscopies validates the identification of this osmolyte.

Joint-action of antifouling substances in copper-free paints.

Due to the environmentally harmful impact of tributyltin self-polishing paints, there is a critical need of more ecological alternatives. The aim of the present work is to study the joint-action of three molecules chosen in order to combine the two modes of prevention: chemical and physical repelling of biofouling. This "hybrid" system is principally dedicated to disturb durable settlement of microfouling. Each component was chosen according to its specific properties: chlorhexidine is a bisdiguanide antiseptic with antibacterial activity, zinc peroxide is an inorganic precursor of high instable entities which react with seawater to create hydrogen peroxide, Tween 85 is a non ionic surfactant disturbing interactions between colonizing organisms and surface. Obtained results highlighted the interest on mixing such molecules to get additive action on antifouling efficiency.

Dynamic approaches of mixed species biofilm formation using modern technologies.

Bacteria and diatoms exist in sessile communities and develop as biofilm on all surfaces in aqueous environments. The interaction between these microorganisms in biofilm was investigated with a bacterial genus Pseudoalteromonas sp. (strain 3J6) and two benthic diatoms Amphora coffeaeformis and Cylindrotheca closterium. Each biofilm was grown for 22 days. Images from the confocal microscopy show a difference of adhesion between Pseudoalteromonas 3J6 and diatoms. Indeed, a stronger adhesion is found with C. closterium suggesting cohabitation between Pseudoalteromonas 3J6 and C. closterium compared at an adaptation for bacteria and A. coffeaeformis. The cellular attachment and the growth evolution in biofilm formation depend on each species of diatoms in the biofilm. Behaviour of microalgae in presence of bacteria demonstrates the complexity of the marine biofilm.

Evaluation of antibacterial activity against Salmonella Enteritidis.

Salmonella enterica serovar Enteritidis is a well-known pathogenic bacterium responsible for human gastrointestinal enteritis mainly due to the consumption of eggs and egg-products. The first aim of this work was to study several virulence factors of a strain isolated from egg content: SEovo. First, bacterial growth was studied at several temperatures and cell morphology was observed by scanning electronic microscopy. These experiments showed Salmonella's ability to grow at low temperatures and to produce exoproducts. Next, Salmonella motility was observed performing swimming, twitching, and swarming tests. Results indicated a positive flagellar activity and the cell ability to differentiate and become hyperflagellated under specific conditions. Moreover, SEovo adherence and biofilm formation was carried out. All of these tests enabled us to conclude that SEovo is a potential pathogen, thus it can be used as a model to perform antibacterial experiments. The second part of the study was dedicated to the evaluation of the antibacterial activity of different molecules using several methods. The antibacterial effect of silver and copper aluminosilicates was tested by two different kinds of methods. On the one hand, the effect of these two antibacterial agents was determined using microbiological methods: viable cell count and agar-well diffusion. And on the other hand, the antibacterial activity was evaluated using CLSM and SYTO Red/SYTOX Green dyeing. CLSM allowed for the evaluation of the biocide on sessile cells, whereas the first methods did not. Results showed that adhered bacteria were more resistant than planktonic counterparts and that CLSM was a good alternative to evaluate antibacterial activity on fixed bacteria without having to carry out a removing step.

Modification of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) film by chemical graft copolymerization.

The graft copolymerization of 2-hydroxyethylmethacrylate (HEMA) onto poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) films has been investigated. The graft copolymerization was conducted in aqueous media using benzoyl peroxide (BPO) as chemical initiator. PHBHV films were prepared by solvent casting. Different parameters affecting the graft yield were studied such as monomer concentration, initiator concentration, and reaction time. The extent of grafting has been modulated by the preparation conditions, in particular the concentration of HEMA. However, it is interesting to note that the initiator concentration had only a slight influence on the graft yield. Characterization of the grafted PHBHV films assumed that the graft copolymerization not only occurred on the film surface but also took place into the film bulk. Differential scanning calorimetry showed that crystallinity dramatically decreased with increasing graft yield, indicating that graft copolymerization hindered the crystallization process. Wettability has been obviously improved by grafting a hydrophilic monomer such as HEMA for high graft yield (>130%).