High-Performance Monolithic 3D Integrated Complementary Inverters Based on Monolayer n-MoS2 and p-WSe2.

Herein, the structure of integrated M3D inverters are successfully demonstrated where a chemical vapor deposition (CVD) synthesized monolayer WSe2 p-type nanosheet FET is vertically integrated on top of CVD synthesized monolayer MoS2 n-type film FET arrays (2.5 × 2.5 cm) by semiconductor industry techniques, such as transfer, e-beam evaporation (EBV), and plasma etching processes. A low temperature (below 250 °C) is employed to protect the WSe2 and MoS2 channel materials from thermal decomposition during the whole fabrication process. The MoS2 NMOS and WSe2 PMOS device fabricated show an on/off current ratio exceeding 106 and the integrated M3D inverters indicate an average voltage gain of ≈9 at VDD = 2 V. In addition, the integrated M3D inverter demonstrates an ultra-low power consumption of 0.112 nW at a VDD of 1 V. Statistical analysis of the fabricated inverters devices shows their high reliability, rendering them suitable for large-area applications. The successful demonstration of M3D inverters based on large-scale 2D monolayer TMDs indicate their high potential for advancing the application of 2D TMDs in future integrated circuits.

Design of a Self-Powered System by Wind-Driven Triboelectric Nanogenerator Based on 0.94(Bi0.5 Na0.5 )TiO3 -0.06Ba(Zr0.25 Ti0.75 )O3 /Polyvinylidene Fluoride (BNT-BZT/PVDF) Composites.

The portable power bank as an energy storage device has received tremendous attention while the limited capacity and periodical charging are critical issues. Here, a self-charging power system (SCPS) consisting of a 0.94(Bi0.5 Na0.5 )TiO3 -0.06Ba(Zr0.25 Ti0.75 )O3 /polyvinylidenefluoride (BNT-BZT/PVDF) composite film-based triboelectric nanogenerator (TENG) is designed as a wind energy harvester and an all-solid-state lithium-ion battery (ASSLIB) as the energy storage device. The optimized TENG can provide an output voltage of ≈400 V, a current of ≈45 µA, and a maximum power of ≈10.65 mW, respectively. The ASSLIB assembled by LiNiCoMnO2 as the cathode, NiCo2 S4 as the anode, and Li7 La3 Zr2 O12 as the solid electrolyte can maintain a discharge capacity of 51.3 µAh after 200 cycles with a Coulombic efficiency of 98.5%. Particularly, an ASSLIB can be easily charged up to 3.8 V in 58 min using the wind-driven TENG, which can continuously drive 12 parallel-connected white light-emitting diodes (LEDs) or a pH meter. This work demonstrates the development of low-cost, high-performance and high-safety SCPSs and their large-scale practical application in self-powered microelectronic devices.

Epidemiology and Ecology of Severe Fever With Thrombocytopenia Syndrome in China, 2010‒2018.

BACKGROUND: The growing epidemics of severe fever with thrombocytopenia syndrome (SFTS), an emerging tick-borne disease in East Asia, and its high case fatality rate have raised serious public health concerns. METHODS: Surveillance data on laboratory-confirmed SFTS cases in China were collected. The spatiotemporal dynamics and epidemiological features were explored. The socioeconomic and environmental drivers were identified for SFTS diffusion using survival analysis and for SFTS persistence using a two-stage generalized boosted regression tree model. RESULTS: During 2010‒2018, a total of 7721 laboratory-confirmed SFTS cases were reported in China, with an overall case fatality rate (CFR) of 10.5%. The average annual incidence increased >20 times and endemic areas expanded from 27 to 1574 townships, whereas the CFR declined from 19% to 10% during this period. Four geographical clusters-the Changbai Mountain area, the Jiaodong Peninsula, the Taishan Mountain area, and the Huaiyangshan Mountain area-were identified. Diffusion and persistence of the disease were both driven by elevation, high coverages of woods, crops, and shrubs, and the vicinity of habitats of migratory birds but had different meteorological drivers. Residents ≥60 years old in rural areas with crop fields and tea farms were at increased risk to SFTS. CONCLUSIONS: Surveillance of SFTS and intervention programs need to be targeted at areas ecologically suitability for vector ticks and in the vicinity of migratory birds to curb the growing epidemic.

Topical doxycycline monohydrate hydrogel 1% targeting proteases/PAR2 pathway is a novel therapeutic for atopic dermatitis.

Atopic Dermatitis (AD) is characterized by skin barrier disruption and an aberrant immune response. Doxycycline is tetracycline antibiotics broadly used systemically to treat inflammatory dermatologic conditions. Several studies have shown doxycycline has anti-inflammatory and pro-healing properties, mainly by blocking tissue proteolytic activity. It is our hypothesis that daily application of a novel doxycycline topical formulation in AD subjects will reduce severity of the disease, by blocking cutaneous proteases activity and restoring skin barrier function and inflammation. To test this hypothesis, we performed a proof of concept, open-label clinical study. Subjects enrolled in the study (n = 15) applied NanoDOX® Hydrogel 1% daily for 4 weeks on a chosen eczematous area. Investigational drug was well tolerated, and no local or systemic adverse events due to investigational drug were reported. Notably, a significant clinical improvement was observed based on a modified Eczema Area & Severity Index (EASI) score of the treated area from start of treatment to 14 and 28 days post-treatment (P < .001). A significant improvement of pruritus was also observed (P = .02). This proof of concept clinical trial is first to explore the impact of a non-systemic doxycycline treatment on AD patients. Our results provide evidence to investigate novel AD treatment strategies targeting cutaneous proteases activity.

Epidemiological parameters of COVID-19 and its implication for infectivity among patients in China, 1 January to 11 February 2020.

BackgroundThe natural history of disease in patients infected with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) remained obscure during the early pandemic.AimOur objective was to estimate epidemiological parameters of coronavirus disease (COVID-19) and assess the relative infectivity of the incubation period.MethodsWe estimated the distributions of four epidemiological parameters of SARS-CoV-2 transmission using a large database of COVID-19 cases and potential transmission pairs of cases, and assessed their heterogeneity by demographics, epidemic phase and geographical region. We further calculated the time of peak infectivity and quantified the proportion of secondary infections during the incubation period.ResultsThe median incubation period was 7.2 (95% confidence interval (CI): 6.9‒7.5) days. The median serial and generation intervals were similar, 4.7 (95% CI: 4.2‒5.3) and 4.6 (95% CI: 4.2‒5.1) days, respectively. Paediatric cases < 18 years had a longer incubation period than adult age groups (p = 0.007). The median incubation period increased from 4.4 days before 25 January to 11.5 days after 31 January (p < 0.001), whereas the median serial (generation) interval contracted from 5.9 (4.8) days before 25 January to 3.4 (3.7) days after. The median time from symptom onset to discharge was also shortened from 18.3 before 22 January to 14.1 days after. Peak infectivity occurred 1 day before symptom onset on average, and the incubation period accounted for 70% of transmission.ConclusionThe high infectivity during the incubation period led to short generation and serial intervals, necessitating aggressive control measures such as early case finding and quarantine of close contacts.

Designing a 0D/2D S-Scheme Heterojunction over Polymeric Carbon Nitride for Visible-Light Photocatalytic Inactivation of Bacteria.

Constructing heterojunctions between two semiconductors with matched band structure is an effective strategy to acquire high-efficiency photocatalysts. The S-scheme heterojunction system has shown great potential in facilitating separation and transfer of photogenerated carriers, as well as acquiring strong photoredox ability. Herein, a 0D/2D S-Scheme heterojunction material involving CeO2 quantum dots and polymeric carbon nitride (CeO2 /PCN) is designed and constructed by in situ wet chemistry with subsequent heat treatment. This S-scheme heterojunction material shows high-efficiency photocatalytic sterilization rate (88.1 %) towards Staphylococcus aureus (S. aureus) under visible-light irradiation (λ≥420 nm), which is 2.7 and 8.2 times that of pure CeO2 (32.2 %) and PCN (10.7 %), respectively. Strong evidence of S-scheme charge transfer path is verified by theoretical calculations, in situ irradiated X-ray photoelectron spectroscopy, and electron paramagnetic resonance.

Exploring the existence of better hands for manipulation than the human hand based on hand proportions.

Human exhibits the most dexterous manual manipulation among the anthropoids. The sophisticated dexterity of human hand has been linked to its distinctive morphology compared to the nonhuman anthropoids. The human hand is derived from the ancestral hands after longtime evolution. However, there are more possible morphologies that the hands could take during the evolutionary process. It remains unknown whether better hands for manipulation than the human hand exist among these possible hands. To answer the question, the relationship between the manipulative capability and hand morphology need to be investigated in the region of more possible hands. Here we employ a kinematic model to quantitatively assess the manipulative ability of the possible hands from the aspect of hand proportions. The segment length proportions of each possible hand are reconstructed by the major evolutionary patterns of the anthropoid hands. Our results reveal that too long and too short thumbs relative to fingers both hamper the manual dexterity, though the long thumb of human hand is traditionally thought to be beneficial to manipulation. The results promote the understanding of the link between hand morphology and function. Furthermore, we find out the optimal hand for dexterous manipulation within the region reconstructed by the major evolutionary patterns of the anthropoid hands. The optimal hand is more dexterous than the human hand. Compared to the optimal hand, the human hand has shorter metacarpals relative to phalanges, which is thought to be advantageous to the prehensility. It suggests that the human hand is not an organ exclusive for the dexterous manipulation, but a trade-off between multiple functions.

Assessing the manipulative potentials of monkeys, apes and humans from hand proportions: implications for hand evolution.

The hand structure possesses a greater potential for performing manipulative skills than is typically observed, whether in humans or non-human anthropoids. However, a precise assessment of the potential manipulative skills of hands has been challenging, which hampers our understanding of the evolution of manipulative abilities in anthropoid hands. Here, we establish a functional model to quantitatively infer the manipulative potentials of anthropoid hands based on hand proportions. Our results reveal a large disparity of manipulative potentials among anthropoid hands. From the aspect of hand proportions, the human hand has the best manipulative potential among anthropoids. However, the species with a manipulative potential closer to that of humans are not our nearest relatives, chimpanzees, but rather, are certain monkey species. In combination with the phylogenetically informed morphometric analyses, our results suggest that the morphological changes of non-human anthropoid hands did not coevolve with the brain to facilitate the manipulative ability during the evolutionary process, although the manipulative ability is a survival skill. The changes in non-human anthropoid hands may have more likely evolved under selective pressure for locomotion than manipulation.

Highly Tribo-Positive Nylon-11 Film Fabricated by Multiscale Structural Regulation through a Roll-to-Roll Processing.

Triboelectric polymers have attracted extensive attention due to their great electron-accepting and electron-donating properties in contact electrification as well as their flexible and low-cost merits and have become promising electrode materials in triboelectric nanogenerators (TENGs). However, most research has exclusively focused on improving the electron capture capability of the triboelectric layer, neglecting to enhance the electron-donating capability, which leads to a low output performance of TENG and limits its practical application. In this study, we developed a method to fabricate highly tribo-positive Nylon-11 film through roll-to-roll processing. Paired with the poly(tetrafluoroethylene) triboelectric layer, the transferred charge density of contact-separation TENG based on Nylon-11 film prepared by this method reaches 291.1 µC/m2, which has been improved by 12.4% compared with the conventional compression molding sample. The novel fabricating method can regulate the surface functional groups to achieve higher surface potential and obtain a favorable pseudohexagonal crystal phase, leading to an increasing transferred charge density in triboelectrification. Additionally, it has been analyzed that higher chemical potential of materials can facilitate the transfer of electrons from the triboelectric polymer surface. This study provides a nonadditive, simple, and effective strategy to fabricate excellent tribo-positive material, which can significantly enhance the performance of TENG.

Rational design of comb-like 1D-1D ZnO-ZnSe heterostructures toward their excellent performance in flexible photodetectors.

One-dimensional (1D) Zn-based heterostructures have attracted considerable interest in the field of photodetection because of their tunable properties, flexibility, and unique optoelectronic properties. However, designing 1D multi-component Zn-based heterostructures for advanced photodetectors is still a great challenge. Herein, comb-like 1D-1D ZnO-ZnSe heterostructures with ZnO and ZnSe nanowires (NWs) comprising the shaft and teeth of a comb are reported. The length of the ZnO NWs can be modulated in the range of 300-1200 nm. Microstructural characterizations confirm that the 1D heterostructure clearly shows the spatial distribution of individual components. The well-designed structure displays an extended broadband photoresponse and higher photosensitivity than pure ZnSe NWs. Furthermore, ZnSe NWs with an appropriate length of ZnO branches show increased photoresponses of 3835% and 798% compared to those of pure ZnSe NWs under green and red-light irradiation, respectively. In addition, the integrated flexible photodetector presents excellent folding endurance after 1000 bending tests. This well-designed structure has significant potential for other 1D-based semiconductors in optoelectronic applications.

A systematic review and meta-analysis on the effectiveness of bivalent mRNA booster vaccines against Omicron variants.

BACKGROUND: A global shift to bivalent mRNA vaccines is ongoing to counterbalance the diminishing effectiveness of the original monovalent vaccines due to the evolution of SARS-CoV-2 variants, yet substantial variation in the bivalent vaccine effectiveness (VE) exists across studies and a complete picture is lacking. METHODS: We searched papers evaluating absolute or relative effectiveness of SARS-CoV-2 BA.1 type or BA.4/5 type bivalent mRNA vaccines on eight publication databases published from September 1st, 2022, to November 8th, 2023. Pooled VE against Omicron-associated infection and severe events (hospitalization and/or death) was estimated in reference to unvaccinated, ≥2 original monovalent doses, and ≥ 3 original monovalent doses. RESULTS: From 630 citations identified, 28 studies were included, involving 55,393,303 individuals. Bivalent boosters demonstrated higher effectiveness against symptomatic or any infection for all ages combined, with an absolute VE of 53.5 % (95 % CI: -22.2-82.3 %) when compared to unvaccinated and relative VE of 30.8 % (95 % CI: 22.5-38.2 %) and 28.4 % (95 % CI: 10.2-42.9 %) when compared to ≥ 2 and ≥ 3 original monovalent doses, respectively. The corresponding VE estimates for adults ≥ 60 years old were 22.5 % (95 % CI: 16.8-39.8 %), 31.4 % (95 % CI: 27.7-35.0 %), and 30.6 % (95 % CI: -13.2-57.5 %). Pooled bivalent VE estimates against severe events were higher, 72.9 % (95 % CI: 60.5-82.4 %), 57.6 % (95 % CI: 42.4-68.8 %), and 62.1 % (95 % CI: 54.6-68.3 %) for all ages, and 72.0 % (95 % CI: 51.4-83.9 %), 63.4 % (95 % CI: 41.0-77.3 %), and 60.7 % (95 % CI: 52.4-67.6 %) for adults ≥ 60 years old, compared to unvaccinated, ≥2 original monovalent doses, and ≥ 3 original monovalent doses, respectively. CONCLUSIONS: The bivalent boosters demonstrated superior protection against severe outcomes than the original monovalent boosters across age groups, highlighting the critical need for improving vaccine coverage, especially among the vulnerable older subpopulation.

Enhanced Electrical Transport Properties of Molybdenum Disulfide Field-Effect Transistors by Using Alkali Metal Fluorides as Dielectric Capping Layers.

The electronic properties of 2D materials are highly influenced by the molecular activity at their interfaces. A method was proposed to address this issue by employing passivation techniques using monolayer MoS2 field-effect transistors (FETs) while preserving high performance. Herein, we have used alkali metal fluorides as dielectric capping layers, including lithium fluoride (LiF), sodium fluoride (NaF), and potassium fluoride (KF) dielectric capping layers, to mitigate the environmental impact of oxygen and water exposure. Among them, the LiF dielectric capping layer significantly improved the transistor performance, specifically in terms of enhanced field effect mobility from 74 to 137 cm2/V·s, increased current density from 17 µA/µm to 32.13 µA/µm at a drain voltage of Vd of 1 V, and decreased subthreshold swing to 0.8 V/dec The results have been analytically verified by X-ray photoelectron spectroscopy (XPS) and Raman, and photoluminescence (PL) spectroscopy, and the demonstrated technique can be extended to other transition metal dichalcogenide (TMD)-based FETs, which can become a prospect for cutting-edge electronic applications. These findings highlight certain important trade-offs and provide insight into the significance of interface control and passivation material choice on the electrical stability, performance, and enhancement of the MoS2 FET.

Dissipation, residues, and risk assessment of spirodiclofen in citrus.

The dissipation, residues, and distribution of spirodiclofen, a new type of insecticide and acaricide that belongs to the class of ketoenols or tetronic acids, in citrus were investigated in this study. Risk assessment of sprodiclofen was also conducted based on those data. The open-field experiments were conducted in Guangdong, Fujian, and Guangxi of China. Results showed that the half-lives in citrus ranged from 6.5 to 13.6 days at three sites. The terminal residues of spirodiclofen were all below the FAO/WHO maximum residue limit of 0.5 mg/kg in citrus, when they were determined 14 days after final application. Distribution of spirodiclofen in peel and flesh was analyzed, and residues were found to be concentrated on peel. Risk assessment was performed by calculation of risk quotient, which showed that the use of spirodiclofen is comparably safe for humans.

Effectiveness of SARS-CoV-2 vaccines against Omicron infection and severe events: a systematic review and meta-analysis of test-negative design studies.

Background: A rapidly growing body was observed of literature evaluating the vaccine effectiveness (VE) against Omicron in test-negative design studies. Methods: We systematically searched papers that evaluated VE of SARS-CoV-2 vaccines on PubMed, Web of Science, Cochrane Library, Google Scholar, Embase, Scopus, bioRxiv, and medRxiv published from November 26th, 2021, to June 27th, 2022 (full doses and the first booster), and to January 8th, 2023 (the second booster). The pooled VE against Omicron-associated infection and severe events were estimated. Results: From 2,552 citations identified, 42 articles were included. The first booster provided stronger protection against Omicron than full doses alone, shown by VE estimates of 53.1% (95% CI: 48.0-57.8) vs. 28.6% (95% CI: 18.5-37.4) against infection and 82.5% (95% CI: 77.8-86.2) vs. 57.3% (95% CI: 48.5-64.7) against severe events. The second booster offered strong protection among adults within 60 days of vaccination against infection (VE=53.1%, 95% CI: 48.0-57.8) and severe events (VE=87.3% (95% CI: 75.5-93.4), comparable to the first booster with corresponding VE estimates of 59.9% against infection and 84.8% against severe events. The VE estimates of booster doses against severe events among adults sustained beyond 60 days, 77.6% (95% CI: 69.4-83.6) for first and 85.9% (95% CI: 80.3-89.9) for the second booster. The VE estimates against infection were less sustainable regardless of dose type. Pure mRNA vaccines provided comparable protection to partial mRNA vaccines, but both provided higher protection than non-mRNA vaccines. Conclusions: One or two SARS-CoV-2 booster doses provide considerable protection against Omicron infection and substantial and sustainable protection against Omicron-induced severe clinical outcomes.

Rational design on high-performance triboelectric nanogenerator consisting of silicon carbide@silicon dioxide nanowhiskers/polydimethylsiloxane (SiC@SiO2/PDMS) nanocomposite films.

The relatively low output performance of triboelectric nanogenerator (TENG), which faces a challenge in performance improvement, limits its practical applications. Here, a high-performance TENG consisting of a silicon carbide@silicon dioxide nanowhiskers/polydimethylsiloxane (SiC@SiO2/PDMS) nanocomposite film and a superhydrophobic aluminum (Al) plate as triboelectric layers is demonstrated. The 7 wt% SiC@SiO2/PDMS TENG presents a peak voltage of 200 V and a peak current of 30 µA, which are ~ 300 and ~ 500% over that of the PDMS TENG, owing to an increase in dielectric constant and a decrease in dielectric loss of the PDMS film because of electric insulated SiC@SiO2 nanowhiskers. Furthermore, a 10 µF capacitor can be charged up to 3 V within ~ 87 s, which can be continuously operated on the electronic watch for 14 s. The work provides an effective strategy for improving output performance of TENG by adding core-shell nanowhiskers to modulate the dielectric properties of organic materials.

Hierarchical porous Fe-N/C@surfactant composites synthesized by a surfactant-assisted strategy as high-performance bifunctional oxygen electrodes for rechargeable zinc-air batteries.

Herein, a soft-template strategy involving the cationic surfactants has been successfully applied to size-controlled synthesis of hierarchical porous Fe-N/C for the first time. Specifically, a small amount of Fe and cationic surfactants can be uniformly doped into the zinc-based zeolite imidazole framework (ZIF-8) crystal particles and the cationic surfactants play a critical role in the formation of hierarchically porous Fe-ZIF-8@surfactant precursors. When the Fe-ZIF-8@surfactant is subsequently pyrolyzed, atomically dispersed Fe-Nx coordination structures can be in-situ converted to Fe-N/C, while the cationic surfactants decompose to form a carbon matrix to encapsulate the active sites, thereby preventing the aggregation of nanoparticles to a certain extent. As a result, the combined Fe nanocrystals and atomically dispersed Fe-Nx in the graphitic carbon matrix generate a synergistic effect to boost the electrocatalytic behaviors with a more positive half-wave potential (0.92 V) for oxygen reduction reaction (ORR) and a lower overpotential (420 mV at 10 mA cm-2) for oxygen evolution reaction (OER). As a proof of concept, the Fe-N/C@TTAB based zinc-air batteries (ZABs) present an outstanding peak power density (107.9 mW cm-2) and a superior specific capacity (706.3 mAh g-1) with robust cycling stability over 900 cycles for 150 h, which are better than the commercial Pt/C + IrO2 based ZABs.

Effect and Related Mechanism of Platelet-Rich Plasma on the Osteogenic Differentiation of Human Adipose-Derived Stem Cells.

Objective: Human adipose-derived stem cells (hADSCs) are ideal seed cells for the regeneration of alveolar bone defects. Platelet-rich plasma (PRP), which is rich in growth factors, promotes tissue repair. The purpose of the present study was to investigate whether PRP promotes the osteogenic differentiation of hADSCs and to perform high-throughput sequencing to explore the possible mechanism. Methods: hADSCs were divided into the three following groups: CON group, OM group, and PRP group. Osteogenesis was detected by Alizarin Red staining on day 14. Total RNA was extracted from the OM and PRP groups for high-throughput sequencing. The target genes of the differentially expressed osteogenic-related miRNAs were predicted, and combined miRNA/mRNA analysis was then performed. The mRNA and protein expression levels of hsa-miR-212-5p, type 1 cannabinoid receptor (CNR1), alkaline phosphatase (ALP), Runx2, osteocalcin (OCN), and collagen 1 A1 (COL1A1) in the OM and PRP groups were detected by qRT-PCR and Western blot analyses. The binding between hsa-miR-212-5p and CNR1 was detected by a dual-luciferase reporter assay. Results: Both the OM and PRP groups exhibited enhanced proliferation of hADSCs, and the differences at 48 h and 72 h were statistically significant (P < 0.05). The PRP group had significantly more calcium nodules than the CON group (P < 0.05). Through high-throughput sequencing analysis, differential miRNA and mRNA expression profiles were obtained. During hADSC osteogenesis, the expression of hsa-miR-212-5p was downregulated, and the expression of CNR1 was upregulated. hsa-miR-212-5p was found to bind directly to the 3' UTR of CNR1. Conclusions: The present findings indicated that downregulation of hsa-miR-212-5p and upregulation of CNR1 may be involved in the process by which PRP promotes the osteogenic differentiation of hADSCs.

Hierarchically Hybrid Porous Co3O4@NiMoO4/CoMoO4 Heterostructures for High-Performance Electrochemical Energy Storage.

Hierarchical, ultrathin, and porous NiMoO4@CoMoO4 on Co3O4 hollow bones were successfully designed and synthesized by a hydrothermal route from the Co-precursor, followed by a KOH (potassium hydroxide) activation process. The hydrothermally synthesized Co3O4 nanowires act as the scaffold for anchoring the NiMoO4@CoMoO4 units but also show more compatibility with NiMoO4, leading to high conductivity in the heterojunction. The intriguing morphological features endow the hierarchical Co3O4@NiMoO4@CoMoO4 better electrochemical performance where the capacity of the Co3O4@NiMoO4@CoMoO4 heterojunction being 272 mA·h·g-1 at 1 A·g-1 can be achieved with a superior retention of 84.5% over 1000 cycles. The enhanced utilization of single/few NiMoO4@CoMoO4 shell layers on the Co3O4 core make it easy to accept extra electrons, enhancing the adsorption of OH- at the shell surface, which contribute to the high capacity. In our work, an asymmetric supercapacitor utilizing the optimized Co3O4@NiMoO4@CoMoO4 activated carbon (AC) as electrode materials was assembled, namely, Co3O4@NiMoO4@CoMoO4//AC device, yielding a maximum high energy density of 53.9 W·h·kg-1 at 1000 W·kg-1. It can retain 25.92 W·h·kg-1 even at 8100 W·kg-1, revealing its potential and viability for applications. The good power densities are ascribed to the porous feature from the robust architecture with recreated abundant mesopores on the composite, which assure improved conductivity and enhanced diffusion of OH- and also the electron transport. The work demonstrated here holds great promise for synthesizing other heterojunction materials M3O4@MMoO4@MMoO4 (M = Fe, Ni, Sn, etc).

Ecology of Middle East respiratory syndrome coronavirus, 2012-2020: A machine learning modelling analysis.

The ongoing enzootic circulation of the Middle East respiratory syndrome coronavirus (MERS-CoV) in the Middle East and North Africa is increasingly raising the concern about the possibility of its recombination with other human-adapted coronaviruses, particularly the pandemic SARS-CoV-2. We aim to provide an updated picture about ecological niches of MERS-CoV and associated socio-environmental drivers. Based on 356 confirmed MERS cases with animal contact reported to the WHO and 63 records of animal infections collected from the literature as of 30 May 2020, we assessed ecological niches of MERS-CoV using an ensemble model integrating three machine learning algorithms. With a high predictive accuracy (area under receiver operating characteristic curve = 91.66% in test data), the ensemble model estimated that ecologically suitable areas span over the Middle East, South Asia and the whole North Africa, much wider than the range of reported locally infected MERS cases and test-positive animal samples. Ecological suitability for MERS-CoV was significantly associated with high levels of bareland coverage (relative contribution = 30.06%), population density (7.28%), average temperature (6.48%) and camel density (6.20%). Future surveillance and intervention programs should target the high-risk populations and regions informed by updated quantitative analyses.

Rational Design on Chemical Regulation of Interfacial Microstress Engineering by Matching Young's Modulus in a CsPbBr3 Perovskite Film with Mechanical Compatibility toward Enhanced Photoelectric Conversion Efficiency.

Thermodynamically induced tensile stress in the perovskite film will lead to the formation of atomic vacancies, seriously destroying the photovoltaic efficiency stability of the perovskite solar cells (PSCs). Among them, cations and halide anions vacancies are unavoidable; these point vacancies are considered to be a major source of the ionic migration and perovskite degradation at the crystal boundary and surface of the perovskite films. Here, we use choline bromide to modify the perovskite film by occupying the atomic defects in the CsPbBr3 perovskite film. The results show that the zwitterion quaternary ammonium ions and bromide ions in choline bromide can simultaneously occupy the Cs+ cation and Br- anions vacancies in the perovskite film by the ionic bonding effect, for which the defect-state density on the surface of the perovskite film can be significantly reduced, leading to the effective enhancement of carrier lifetime. In addition, the residual stress at the crystal boundary can be effectively reduced by lowering the Young's modulus in the CsPbBr3 perovskite film. As a result, the optimized device achieves a photoelectric conversion efficiency (PCE) of 9.06% with an increase of 41.1% compared to the control device with a PCE of 6.42%. Most importantly, the newborn thermal stress due to thermal expansion during heat working conditions can be transferred from the polycrystalline perovskite to the carbon layer by the matched Young's modulus, thus resulting in improved stability perovskite film under environmental conditions. The work provides new insights for preparing high-quality perovskite films with low defect-state density and residual stress.