Chitosan-Gated Fluorescent Mesoporous Silica Nanocarriers for the Real-Time Monitoring of Drug Release.

We have constructed a novel gated nanocarrier for the real-time monitoring of drug release, consisting of three parts: (i) mesoporous silica nanoparticles (MSNs) as the drug carrier, (ii) chitosan as the nanovalve to block and unlock the pores, and (iii) 1,8-naphthalimide fluorophore as a connecting arm and fluorescent signal source. In the absence of glutathione (GSH), the integrity of the system results in the formation of pores in a closed state and the sulfone would block the intramolecular charge transfer (ICT) process, leading to no fluorescence emission. However, the nucleophilic attack of GSH can cause the removal of the chitosan and recovery of ICT property, thus triggering drug release and green fluorescence emission. The results demonstrate that the change of GSH concentration in vivo or vitro would lead to a change in drug release as well as a concurrent change in fluorescence signal, which can expand the application of our gated nanocarrier for monitoring different drug release in real time.

A self-healing, robust adhesion, multiple stimuli-response hydrogel for flexible sensors.

Ionic hydrogels have great application potential in human index monitoring and wound treatment, such as in wearable sensors, wound dressings, and ionic skin. However, the design of a hydrogel achieving the synergistic characteristics of excellent mechanical properties, robust adhesion, and multiple stimuli-responses remains a critical challenge. Herein, by introducing negatively charged clay nanosheets, we report a smart ionic Gelatin/PAAm/Clay hydrogel (GPNs gel) with a high conductivity of 10.87 mS cm-1. The as-prepared gel exhibits excellent self-healing properties, robust adhesion (interfacial toughness of up to 485 J m-2 with pigskin), and multiple stimuli-responses driven by salt ions, pH, and stress. Based on this hydrogel, a capacitive sensor has also been designed, which provides linear responses over a wide range (applied pressure up to 2 kPa) and sensitively monitors human motion. In addition, the gel also displays good biocompatibility with human lung embryonic (MRC-5) cells. These characteristics demonstrate that the GPNs gel is an ideal candidate for developing flexible sensor devices.

Preparation of Electrospun Gelatin Mat with Incorporated Zinc Oxide/Graphene Oxide and Its Antibacterial Activity.

Current wound dressings have poor antimicrobial activities and are difficult to degrade. Therefore, biodegradable and antibacterial dressings are urgently needed. In this article, we used the hydrothermal method and side-by-side electrospinning technology to prepare a gelatin mat with incorporated zinc oxide/graphene oxide (ZnO/GO) nanocomposites. The resultant fibers were characterized by field emission environment scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffractometry (XRD) and Fourier transform infrared spectroscopy (FTIR). Results indicated that the gelatin fibers had good morphology, and ZnO/GO nanocomposites were uniformly dispersed on the fibers. The loss of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) viability were observed to more than 90% with the incorporation of ZnO/GO. The degradation process showed that the composite fibers completely degraded within 7 days and had good controllable degradation characteristics. This study demonstrated the potential applicability of ZnO/GO-gelatin mats with excellent antibacterial properties as wound dressing material.

3D plotting in the preparation of newberyite, struvite, and brushite porous scaffolds: using magnesium oxide as a starting material.

Calcium phosphate (CaP)-containing materials, such as hydroxyapatite and brushite, are well studied bone grafting materials owing to their similar chemical compositions to the mineral phase of natural bone and kidney calculi. In recent studies, magnesium phosphate (MgP)-containing compounds, such as newberyite and struvite, have shown promise as alternatives to CaP. However, the different ways in degradation and release of Mg2+ and Ca2+ ions in vitro may affect the biocompatibility of CaP and MgP-containing compounds. In the present paper, newberyite, struvite, and brushite 3D porous structures were constructed by 3D-plotting combining with a two-step cementation process, using magnesium oxide (MgO) as a starting material. Briefly, 3D porous green bodies fabricated by 3D-plotting were soaked in (NH4)2HPO4 solution to form semi-manufactured 3D porous structures. These structures were then soaked in different phosphate solutions to translate the structures into newberyite, struvite, and brushite porous scaffolds. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectrometry (EDS) were used to characterize the phases, morphologies, and compositions of the 3D porous scaffolds. The porosity, compressive strength, in vitro degradation and cytotoxicity on MC3T3-E1 osteoblast cells were assessed as well. The results showed that extracts obtained from immersing scaffolds in alpha-modified essential media induced minimal cytotoxicity and the cells could be attached merely onto newberyite and brushite scaffolds. Newberyite and brushite scaffolds produced through our 3D-plotting and two-step cementation process showed the sustained in vitro degradation and excellent biocompatibility, which could be used as scaffolds for the bone tissue engineering.

Environmentally Friendly Gelatin/ß-Cyclodextrin Composite Fiber Adsorbents for the Efficient Removal of Dyes from Wastewater.

In this paper, environmentally friendly gelatin/ß-cyclodextrin (ß-CD) composite fiber adsorbents prepared by electrospinning were used for the removal of dyes from wastewater. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and a universal materials tester were employed to characterize the internal structures, surface morphologies and mechanical strength of the composite fiber adsorbents. Additionally, the fiber was evaluated as an adsorbent for the removal of methylene blue (MB) from aqueous solution. The effects of the raw material ratio, pH, temperature, concentration and adsorption time were studied. The results show that the gelatin/ß-CD composite fiber adsorbents possess excellent mechanical strength and high adsorption efficiency for MB. The adsorption equilibrium and adsorption kinetics are well-described by the Langmuir isotherm model and the pseudo-second-order kinetic model, respectively. The theoretical maximum adsorption capacity is 47.4 mg·g-1. Additionally, after nine successive desorption-adsorption cycles, the removal rate is still over 70%. Moreover, the gelatin/ß-CD composite fiber adsorbents exhibit excellent adsorption capability for basic fuchsin, gentian violet, brilliant blue R and malachite green dyes. Therefore, owing to the characteristics of degradability, low cost and high-efficiency, the gelatin/ß-CD composite fiber can be used as an efficient adsorbent for the removal of dyes from wastewater.

[Research on Visual Perception-Referenced Compression Method for Multi-Spectral Data with High-Fidelity].

Aim In order to maintain the chromaticity precision in the process of linear compression of the multispectral data, a visual perception-referenced compression method (VPCM) based on the chroma gradient (refer to the partial derivative of chroma to wavelength) is proposed. Method The method firstly successfully developed the transfer functions which could synchronously fusion the spectral features and chromaticity characteristics of human visuals based on the nonlinear analytic feature of human visual system. For further improvement the transfer function, a modified optimizing function was developed to help find out the optimal transfer direction for different sample sets. If the transfer function was finally settled, it will be applied to transforming the spectral data of the sample set (Γ(S)=C). Then the transformed spectral data of the sample set will be compressed with high chromatic accuracy by the principle components analysis method. After that, the compressed data will be reconstructed through inverse transformation (Γ(-1)(C)=), while the reconstructed spectral data will be using to evaluate the effective of the proposed VPCM method. Result Four groups typical and representative sample sets were chosen to test the effective of the proposed method. The CIELab color difference in the D50/2° calculates condition and a proposed mean metamerism index (MMI) calculated with 75 groups typical light sources (including tungsten, fluorescent and LED lamp) was adopted as evaluating metrics. Eventually, the comparative experiment involving several existing methods Lab-PQR and 2-XYZ indicates that the proposed VPCM hold the best chromatic accuracy both for metric MMI and the average color difference ΔE(ab) when compared with Lab-PQR and 2-XYZ, and the spectral accuracy was calculated between Lab-PQR and 2-XYZ with Lab-PQR maintained the highest spectral accuracy. Conclusion The proposed VPCM can preserve high compression chromatic precision at the price of small loss of spectral precision and possess good colorimetric stability under variable reference conditions. It is very applicable for some application fields which require compressing of the multi-spectral data with high chromatic accuracy.

An epidermal growth factor receptor exon 19 mutation in a mucin-producing gastric cancer sample from a Chinese patient.

OBJECTIVE: To determine whether a subgroup of gastric cancer patients might benefit from epidermal growth factor receptor-tyrosine kinase inhibitors. METHODS: A total of 103 gastric cancer samples were collected for this study. High-resolution melting and deoxyribonucleic acid sequencing were used to detect epidermal growth factor receptor mutations in exons 19 and 21. RESULTS: Polymerase chain reaction-high-resolution melting was successfully performed on all 103 samples. Aberrant melting curves were found in only one sample. Sanger sequencing revealed a 15 bp deletion (c.2235_2249del; p.Glu746_Ala750del) in epidermal growth factor receptor exon 19. The sample was from a male patient, and the pathological diagnosis was a mucin-producing gastric cancer with lymph node metastasis. To date, this is the first report on epidermal growth factor receptor exon 19 mutation in gastric cancer. CONCLUSIONS: An epidermal growth factor receptor mutation in exon 19 was identified in mucin-producing gastric cancer sample from a male patient. This mutation indicates that the small subgroup of patients with mucin-producing gastric cancer might benefit from epidermal growth factor receptor-tyrosine kinase inhibitors.

The Preparation of Chitosan Oligosaccharide/Alginate Sodium/Gelatin Nanofibers by Spiral-Electrospinning.

A spiral-electrospinning was used to mass-produce gelatin nanofibers with a content of chitosan oligosaccharide (COS) and alginate sodium (AS). Multiple jets were observed to form on the edges of the helix slice-spinneret simultaneously. Important electrospinning parameters, such as concentration of COS/gelatin aqueous solution, rotational velocity of spinneret and spinning distance, were examined to investigate the electrospinnability of COS/gelatin solution and the morphology of COS/gelatin nanofiber membranes. Due to the poor miscibility between COS and AS, COS/AS/gelatin nanofiber membranes were obtained from COS/gelatin solution and AS/gelatin solution by mixing electrospinning with multi-spinnerets. The novel needleless electrospinning not only avoided the possibility of nozzle-clogging, but also prepared COS/AS/gelatin nanofibers on a large scale for a wide variety of applications.

On measures of dissimilarity between point patterns: classification based on prototypes and multidimensional scaling.

This paper presents a collection of dissimilarity measures to describe and then classify spatial point patterns when multiple replicates of different types are available for analysis. In particular, we consider a range of distances including the spike-time distance and its variants, as well as cluster-based distances and dissimilarity measures based on classical statistical summaries of point patterns. We review and explore, in the form of a tutorial, their uses, and their pros and cons. These distances are then used to summarize and describe collections of repeated realizations of point patterns via prototypes and multidimensional scaling. We also show a simulation study to evaluate the performance of multidimensional scaling with two types of selected distances. Finally, a multivariate spatial point pattern of a natural plant community is analyzed through various of these measures of dissimilarity.

Gelatin-Based Hydrogel Functionalized with Dopamine and Layered Double Hydroxide for Wound Healing.

Hydrogels with adhesion properties and a wetted structure are promising alternatives to traditional wound dressing materials. The insufficiency of gelatin hydrogels in terms of their adhesive and mechanical strength limits their application in wound dressings. This work presents the design and preparation of a gelatin-based hydrogel functionalized with dopamine (DA) and layered double hydroxide (LDH). The combination of DA and LDH improves the hydrogel's adhesion properties in terms of interfacial adhesion and inner cohesion. Hydrogels with 8% DA and 4% LDH attained the highest adhesion strength of 266.5 kPa, which increased to 295.5 and 343.3 kPa after hydrophobically modifying the gelatin with octanoyl and decanoyl aldehydes, respectively. The gelatin-based hydrogels also demonstrated a macroporous structure, excellent biocompatibility, and a good anti-inflammatory effect. The developed hydrogels accelerated wound healing in Sprague Dawley rat skin full-thickness wound models.

No causal relationship between glucose and inflammatory bowel disease: a bidirectional two-sample mendelian randomization study.

BACKGROUND: Association between glucose and inflammatory bowel disease (IBD) was found in previous observational studies and in cohort studies. However, it is not clear whether these associations reflect causality. Thus, this study investigated whether there is such a causal relation between elevated glucose and IBD, Crohn's disease (CD) and ulcerative colitis (UC). METHODS: We performed a two-sample Mendelian Randomization (MR) with the independent genetic instruments identified from the largest available genome-wide association study (GWAS) for IBD (5,673 cases; 213,119 controls) and its main subtypes, CD and UC. Summarized data for glucose which included 200,622 cases and glycemic traits including HbA1c and type 2 diabetes(T2DM) were obtained from different GWAS studies. Primary and secondary analyses were conducted by preferentially using the radial inverse-variance weighted (IVW) approach. A number of other meta-analysis approach and sensitivity analyses were carried out to assess the robustness of the results. RESULTS: We did not find a causal effect of genetically predicted glucose on IBD as a whole (OR 0.858; 95% CI 0.649-1.135; P = 0.286). In subtype analyses glucose was also suggestively not associated with Crohn's disease (OR 0.22; 95% CI 0.04-1.00; P = 0.05) and ulcerative colitis (OR 0.940; 95% CI 0.628-1.407; P = 0.762). In the other direction, IBD and its subtypes were not related to glucose and glycemic traits. CONCLUSIONS: This MR study is not providing any evidence for a causal relationship between genetically predicted elevated glucose and IBD as well as it's subtypes UC and CD. Regarding the other direction, no causal associations could be found. Future studies with robust genetic instruments are needed to confirm this conclusion.

Electrospun Nanofiber Scaffold for Skin Tissue Engineering: A Review.

Skin tissue engineering (STE) is widely regarded as an effective approach for skin regeneration. Several synthetic biomaterials utilized for STE have demonstrated favorable fibrillar characteristics, facilitating the regeneration of skin tissue at the site of injury, yet they have exhibited a lack of in situ degradation. Various types of skin regenerative materials, such as hydrogels, nanofiber scaffolds, and 3D-printing composite scaffolds, have recently emerged for use in STE. Electrospun nanofiber scaffolds possess distinct advantages, such as their wide availability, similarity to natural structures, and notable tissue regenerative capabilities, which have garnered the attention of researchers. Hence, electrospun nanofiber scaffolds may serve as innovative biological materials possessing the necessary characteristics and potential for use in tissue engineering. Recent research has demonstrated the potential of electrospun nanofiber scaffolds to facilitate regeneration of skin tissues. Nevertheless, there is a need to enhance the rapid degradation and limited mechanical properties of electrospun nanofiber scaffolds in order to strengthen their effectiveness in soft tissue engineering applications in clinical settings. This Review centers on advanced research into electrospun nanofiber scaffolds, encompassing preparation methods, materials, fundamental research, and preclinical applications in the field of science, technology, and engineering. The existing challenges and prospects of electrospun nanofiber scaffolds in STE are also addressed.

A water strider-inspired intestinal stent actuator for controllable adhesion and unidirectional biofluid picking.

Soft-bodied aquatic organisms exhibit extraordinary navigation and mobility in liquid environments which inspiring the development of biomimetic actuators with complex movements. Stimulus-responsive soft materials including hydrogels and shape-memory polymers are replacing traditional rigid parts that leading to dynamic and responsive soft actuators. In this study, we took inspiration from water strider to develop a biomimetic actuator for targeted stimulation and pH sensing in the gastrointestinal tract. We designed a soft and water-based Janus adhesive hydrogel patch that attaches to specific parts of the intestine and responds to pH changes through external stimulation. The hydrogel patch that forms the belly of the water strider driver incorporates an inverse opal microstructure that enables pH responsive behavior. The hydrogel patch on the water strider's leg uses a sandwich structure of Cu particles to convert light into heat and bend under infrared light to mimic the water strider's leg simulating the efficient and steady movement of the water strider's leg which transporting the biological fluid in one direction. This miniature bionic actuator demonstrates controlled adhesion and unidirectional biofluid delivery capabilities, proving its potential for targeted stimulus response and pH sensing in the gastrointestinal tract, thus opening up new possibilities for medical applications in the growing field of soft actuators.

Chlorogenic acid/carboxymethyl chitosan nanoparticle-assisted biomultifunctional hyaluronic acid-based hydrogel scaffolds for burn skin repair.

Burns are a prevalent type of injury worldwide, affecting tens of millions of people each year and significantly impacting the physical and psychological well-being of patients. Consequently, prompt treatment of burn wounds is imperative, with oxidative stress and excessive inflammation identified as primary factors contributing to delayed healing. In recent years, there has been growing interest in in situ crosslinked multifunctional hydrogels as a minimally invasive approach for personalized treatment delivery. To address these, a photocrosslinkable methacryloyl hyaluronic acid hydrogel scaffold embedded with chlorogenic acid/carboxymethyl chitosan nanoparticles (CGA/CMCS-HAMA, CCH), was developed for the treatment of burn wounds. The hydrogel prepared degraded by over 50 % by day 20, demonstrating stability and meeting the therapeutic requirements for burn wounds. Leveraging the extracellular matrix-like properties of HAMA and the antioxidant capabilities of CGA/CMCS NPs, this hydrogel demonstrates the ability to locally and continuously scavenge ROS and inhibit lipid peroxidation, inhibiting ferroptosis. Moreover, hydrogels well modulate the expression of macrophage- and fibroblast-associated inflammatory factors. Additionally, the hydrogel promotes cell adhesion and migration, further supporting the healing process. Overall, this innovative approach offers a safe and promising solution for burn wound treatment, addressing drug breakthrough and safety concerns while being adaptable to various irregular wound types.

Bioinspired colloidal crystal hydrogel pressure sensors with Janus wettability for uterus cervical canal tension perception.

The pursuit of flexible, sensitive, and cost-effective pressure sensors plays a pivotal role in medical diagnostics, particularly in the domain of cervical health monitoring. However, significant challenges remain in the economical production of flexible piezoresistive materials and the integration of microstructures aimed at enhancing sensor sensitivity. This urge highlights the use of innovative, stable hydrogel films that demonstrate robust adherence to soft biological tissues, thereby enabling prolonged bio-signal monitoring. In this study, we introduce an innovative integration of a flexible pressure electrical signal sensor with structural color hydrogel scaffolds. This integration leverages the tunability of the inverse opal structure to fine-tune the scaffold's adherence to the endocervical wall under varying environmental conditions and to amplify the sensitivity of pressure measurements. Our findings indicate that this novel approach holds promise for substantial enhancements in the manufacturing and functional capabilities of cervical pressure sensors, potentially revolutionizing personalized medical treatments and improving patient monitoring.

An Octopus-Inspired Stimulus-Responsive Structural Color Hydrogel for Uterus Cervical Canal Stent.

Soft-bodied aquatic organisms have exhibited remarkable capabilities in navigating and moving within liquid environments serving as a profound inspiration for the development of bionic robots with intricate movements. Traditional rigid components are being replaced by stimulus-responsive soft materials such as hydrogels and shape memory polymers, leading to the creation of dynamically responsive soft robots. In this study, the development of a bionic robot inspired by the shape of an octopus and the adsorptive properties of its tentacles, specifically tailored for targeted stimulation and pH sensing in the cervix, are presented. This approach involves the design of a soft, water-based Janus adhesive hydrogel patch that adheres to specific parts of the cervix and responds to pH changes through external stimuli. The hydrogel patch incorporates inverse opal microstructures mimicking the legs of an octopus, to facilitate efficient and stable locomotion, unidirectional transport of biofluids, and pH-responsive behavior. This miniature bionic robot showcases controlled adhesion and precise unidirectional fluid transport highlighting its potential for targeted stimulus response and pH sensing in the uterine cervical tract. This breakthrough opens new avenues for medical applications within the expanding field of soft-bodied robotics.

Intracranial mesenchymal tumor with multiple extracranial metastases: A case report and literature review.

This study presents a rare case of an older woman with an intracranial mesenchymal tumor in the right frontal and parietal lobes. Despite prompt surgical intervention, her condition rapidly deteriorated because of tumor dissemination, leading to her demise. We highlight the tumor's marked invasiveness and heterogeneity, coupled with a propensity for distant systemic metastasis, which negatively impacted the patient's prognosis. This particular clinical behavior had not been previously reported, making this a novel observation. Thus, through a comprehensive review of relevant literature, we aim to provide valuable insights for further understanding, diagnosing, and treating such tumors.

Implantable Resistive Strain Sensor-Decorated Colloidal Crystal Hydrogel Catheter for Intestinal Tract Pressure Sensing.

In the quest to develop advanced monitoring systems for intestinal peristaltic stress, this study introduces a groundbreaking approach inspired by nature's sensory networks. By the integration of novel materials and innovative manufacturing techniques, a multifunctional Janus hydrogel patch has been engineered. This unique patch not only demonstrates superior stress-sensing capabilities in the intricate intestinal environment but also enables adhesion to wet tissue surfaces. This achievement opens new avenues for real-time physiological monitoring and potential therapeutic interventions in the realm of gastrointestinal health.

Colloidal crystals array enabled bionic biliary stent for efficient domestic biofluid management.

In vivo surgical interventions require effective management of biofluids, including controlling bleeding and removing excess biofluids such as bile, wound exudate, and blood. To address these issues, recent advances have emerged, such as self-sealing needles, drug-eluting stents, and shear-thinning hydrogels. However, complications associated with intestinal mucosal injury and secondary damage still persist. Therefore, a multifunctional stent is urgently required that can effectively remove excessive biofluid. Surface wettability of biliary stents is crucial in biofluid management, and conventional coatings can cause adhesion to wound tissue. To overcome this issue, we developed an interpenetrating Janus wettability stent coating, enabling unidirectional draining of excessive biofluid from its hydrophobic side to hydrophilic side, thereby preventing biofluid from wetting the wound. Furthermore, we demonstrate a directional biofluid movement using a self-pumping dressing in an infected tissue model, providing a new approach for in situ biofluid collection and disease diagnosis by detecting metal ion changes. Overall, our integrated system presents an opportunity to design wound dressings with effective biofluid management and metal ion detection capabilities.

Gut microbiome and metabolic-associated fatty liver disease: Current status and potential applications.

Metabolic-associated fatty liver disease (MAFLD) is one of the most common chronic liver diseases worldwide. In recent years, the occurrence rate of MAFLD has been on the rise, mainly due to lifestyle changes, high-calorie diets, and imbalanced dietary structures, thereby posing a threat to human health and creating heavy social and economic burdens. With the development of 16S sequencing and integrated multi-omics analysis, the role of the gut microbiota (GM) and its metabolites in MAFLD has been further recognized. The GM plays a role in digestion, energy metabolism, vitamin synthesis, the prevention of pathogenic bacteria colonisation, and immunoregulation. The gut-liver axis is one of the vital links between the GM and the liver. Toxic substances in the intestine can enter the liver through the portal vascular system when the intestinal barrier is severely damaged. The liver also influences the GM in various ways, such as bile acid circulation. The gut-liver axis is essential in maintaining the body's normal physiological state and plays a role in the onset and prognosis of many diseases, including MAFLD. This article reviews the status of the GM and MAFLD and summarizes the GM characteristics in MAFLD. The relationship between the GM and MAFLD is discussed in terms of bile acid circulation, energy metabolism, micronutrients, and signalling pathways. Current MAFLD treatments targeting the GM are also listed.