Enhancing ZnO nanowire gas sensors using Au/Fe2O3 hybrid nanoparticle decoration.

Heterojunctions are an important strategy for designing high performance electrical sensor materials and related devices. Herein, a new type of metal-semiconductor hybrid nanoparticle has been successfully used to remarkably sensitize the surface of ZnO nanowires for detecting NO2 with high responses over a broad temperature window ranging from room temperature to 600 °C. These hybrid nanoparticles are comprised of iron oxide nanowires with well dispersed single crystalline Au nanoparticles. The hybrid nanoparticle decorated ZnO nanowires have achieved a giant response, as high as 74 500 toward NO2 gas, about 42 times that of Au decorated ZnO nanowire sensors. This dramatic enhancement may be attributed to the efficient charge transfer across the Au-Fe2O3 Schottky and Fe2O3-ZnO semiconductor heterojunction interfaces. Due to the incorporation of thermally-stable Fe2O3 nanoparticles as the support of Au nanoparticles, the working temperature of nanowire sensors was successfully extended to higher temperatures, with an increase of 200 °C, from 400 °C to 600 °C. Such a combination of semiconductor heterojunction and semiconductor-metal Schottky contact presents a new strategy for designing high performance electrical sensors with high sensitivity, stability, selectivity, and wide operation temperature window, which are potentially suitable for advanced energy systems such as automotive engines and power plants.

Template-Guided Programmable Janus Heteronanostructure Arrays for Efficient Plasmonic Photocatalysis.

Janus heteronanostructures (HNs), as an important class of anisotropic nanomaterials, could facilitate synergistic coupling of diverse functions inherited by their comprised nanocomponents. Nowadays, synthesizing deterministically targeted Janus HNs remains a challenge. Here, a general yet scalable technique is utilized to fabricate an array of programmable Janus HNs based on anodic aluminum oxide binary-pore templates. By designing and employing an overetching process to partially expose four-edges of one set of nanocomponents in a binary-pore template, selective deposition and interfacing of the other set of nanocomponents is successfully achieved along the exposed four-edges to form a densely packed array of Janus HNs on a large scale. In combination with an upgraded two-step anodization, the synthesis provides high degrees of freedom for both nanocomponents of the Janus HNs, including morphologies, compositions, dimensions, and interfacial junctions. Arrays of TiO2-Au and TiO2/Pt NPs-Au Janus HNs are designed, fabricated, and demonstrated about 2.2 times photocurrent density and 4.6 times H2 evolution rate of that obtained from their TiO2 counterparts. The enhancement was mainly determined as a result of localized surface plasmon resonance induced direct hot electron injection and strong plasmon resonance energy transfer near the interfaces of TiO2 nanotubes and Au nanorods. This study may represent a promising step forward to pursue customized Janus HNs, leading to novel physicochemical effects and device applications.

Enhancing sorption kinetics by oriented and single crystalline array-structured ZSM-5 film on monoliths.

To enhance the reaction kinetics without sacrificing activity in porous materials, one potential solution is to utilize the anisotropic distribution of pores and channels besides enriching active centers at the reactive surfaces. Herein, by designing a unique distribution of oriented pores and single crystalline array structures in the presence of abundant acid sites as demonstrated in the ZSM-5 nanorod arrays grown on monoliths, both enhanced dynamics and improved capacity are exhibited simultaneously in propene capture at low temperature within a short duration. Meanwhile, the ZSM-5 array also helps mitigate the long-chain HCs and coking formation due to the enhanced diffusion of reactants in and reaction products out of the array structures. Further integrating the ZSM-5 array with Co3O4 nanoarray enables comprehensive propene removal throughout a wider temperature range. The array structured film design could offer energy-efficient solutions to overcome both sorption and reaction kinetic restrictions in various solid porous materials for various energy and chemical transformation applications.

Unraveling Anisotropic and Pulsating Etching of ZnO Nanorods in Hydrochloric Acid via Correlative Electron Microscopy.

Despite much technical progress achieved so far, the exact surface and shape evolution during wet chemical etching is less unraveled, especially in ionically bonded ceramics. Herein, by using in situ liquid cell transmission electron microscopy, a repeated two-stage anisotropic and pulsating periodic etching dynamic is discovered during the pencil shape evolution of a single crystal ZnO nanorod in aqueous hydrochloric acid. Specifically, the nanopencil tip shrinks at a slower rate along [0001̅] than that along the ⟨101̅0⟩ directions, resulting in a sharper ZnO pencil tip. Afterward, rapid tip dissolution happens due to accelerated etching rates along various crystal directions. Concurrently, the vicinal base region of the original nanopencil tip emerges as a new tip followed by the repeated sequence of tip shrinking and removal. The high-index surfaces, such as {101̅m} (m = 0, 1, 2, or 3) and {21̅ 1̅n} (n = 0, 1, 2, or 3), are found to preferentially expose in different ratios. Our 3D electron tomography, convergent beam electron diffraction, middle-angle bright-field STEM, and XPS results indicate the dissociative Cl- species were bound to the Zn-terminated tip surfaces. Furthermore, DFT calculation suggests the preferential Cl- passivation over the {101̅1} and (0001) surfaces of lower energy than others, leading to preferential surface exposures and the oscillatory variation of different facet etching rates. The boosted reactivity due to high-index nanoscale surface exposures is confirmed by comparatively enhanced chemical sensing and CO2 hydrogenation activity. These findings provide an in-depth understanding of anisotropic wet chemical etching of ionic nanocrystals and offer a design strategy for advanced functional materials.

Transcriptomic analysis of PhoR reveals its role in regulation of swarming motility and T3SS expression in Vibrio parahaemolyticus.

Vibrio parahaemolyticus is a common foodborne pathogen in seafood and represents a major threat to human health worldwide. In this study, we identified that PhoR, a histidine kinase, is involved in the regulation of swarming and flagella assembly. RNA sequencing analysis showed that 1122 genes were differentially expressed in PhoR mutant, including 394 upregulated and 728 downregulated genes. KEGG enrichment and heatmap analysis demonstrated that the bacterial secretion system, flagella assembly and chemotaxis pathways were significantly downregulated in PhoR mutant, while the microbial metabolism in diverse environments and carbon metabolism pathways were upregulated in PhoR mutant. qRT-PCR further confirmed that genes responsible for the type III secretion system (T3SS), swarming and the thermostable direct hemolysin were positively regulated by PhoR. Phosphorylation assays suggested that PhoR was highly activated in BHI medium compared to LB medium. Taken together, these data suggested that activated PhoR contributes to the expression of swarming motility and secretion system genes in Vibrio parahaemolyticus.

Author Correction: Activating low-temperature diesel oxidation by single-atom Pt on TiO2 nanowire array.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Elucidating the Nature of the Cu(I) Active Site in CuO/TiO2 for Excellent Low-Temperature CO Oxidation.

Stabilized Cu+ species have been widely considered as catalytic active sites in composite copper catalysts for catalytic reactions with industrial importance. However, few examples comprehensively explicated the origin of stabilized Cu+ in a low-cost and widely investigated CuO/TiO2 system. In this study, mass producible CuO/TiO2 catalysts with interface-stabilized Cu+ were prepared, which showed excellent low-temperature CO oxidation activity. A thorough characterization and theoretical calculations proved that the strong charge-transfer effect and Ti-O-Cu hybridization in Ti-doped CuO(111) at the CuO/TiO2 interface contributed to the formation and stabilization of Cu+ species. The CO molecule adsorbed on Cu+ and reacted directly with Ti doping-promoted active lattice oxygen via a Mars-van Krevelen mechanism, leading to the enhanced low-temperature activity.

Activating low-temperature diesel oxidation by single-atom Pt on TiO2 nanowire array.

Supported metal single atom catalysts (SACs) present an emerging class of low-temperature catalysts with high reactivity and selectivity, which, however, face challenges on both durability and practicality. Herein, we report a single-atom Pt catalyst that is strongly anchored on a robust nanowire forest of mesoporous rutile titania grown on the channeled walls of full-size cordierite honeycombs. This Pt SAC exhibits remarkable activity for oxidation of CO and hydrocarbons with 90% conversion at temperatures as low as ~160 oC under simulated diesel exhaust conditions while using 5 times less Pt-group metals than a commercial oxidation catalyst. Such an excellent low-temperature performance is sustained over hydrothermal aging and sulfation as a result of highly dispersed and isolated active single Pt ions bonded at the Ti vacancy sites with 5 or 6 oxygen ions on titania nanowire surfaces.

Ion-Exchange Loading Promoted Stability of Platinum Catalysts Supported on Layered Protonated Titanate-Derived Titania Nanoarrays.

Supported metal catalysts are one of the major classes of heterogeneous catalysts, which demand good stability in both the supports and catalysts. Herein, layered protonated titanate-derived TiO2 (LPT-TiO2) nanowire arrays were synthesized to support platinum catalysts using different loading processes. The Pt ion-exchange loading on pristine LPTs followed by thermal annealing resulted in superior Pt catalysts supported on the LPT-TiO2 nanoarrays with excellent hydrothermal stability and catalytic performance toward CO and NO oxidations as compared to the Pt catalysts through wet-impregnation on the anatase TiO2 (ANT-TiO2) nanoarrays resulted from thermal annealing of LPT nanoarrays. Both loading processes resulted in highly dispersed Pt nanoparticles (NPs) with average sizes smaller than 1 nm at their pristine states. However, after hydrothermal aging at 800 °C for 50 h, highly dispersed Pt NPs were only retained on the ion-exchanged LPT-TiO2 nanoarrays with the support structure consisting of a mixture of 74% anatase and 26% rutile TiO2. For the wet-impregnation loading directly on anatase TiO2 nanoarrays derived from LPT, the Pt catalysts experienced severe agglomeration after hydrothermal aging, with the nanoarray supports consisting of 86% anatase and 14% rutile TiO2. Spectroscopy analysis suggested that Pt2+ cations intercalated into the interlayers of the titanate frameworks through ion-exchange impregnation procedure, which altered the chemical and electronic structures of the catalysts, resulting in the shifts of the electronic binding energy, Raman bands, and optical energy bandgap. The ion-exchangeable nature of LPT nanoarrays clearly provides a structural modification in Pt-doped LPT that has resulted in a strong interaction between the Pt catalysts and LPT-TiO2 nanoarray supports, leading to the enhanced hydrothermal stability of the catalysts. Considering the wide applications of the LPT and TiO2 nanomaterials as supports for catalysts, this finding provides a new pathway to design highly stable supported metal catalysts for different reactions.

Direct Synthesis of Conformal Layered Protonated Titanate Nanoarray Coatings on Various Substrate Surfaces Boosted by Low-Temperature Microwave-Assisted Hydrothermal Synthesis.

Layered protonated titanates (LPTs) are promising support materials for catalytic applications because their high surface area and cation exchange capacity provide the possibility of achieving a high metal dispersion. However, the reported LPT nanomaterials are mainly limited to free-standing nanoparticles (NPs) and usually require high temperature and pressure conditions with extended reaction time. In this work, a high-throughput microwave-assisted hydrothermal method was developed for the direct synthesis of conformal LPT nanoarray coatings onto the three-dimensional honeycomb monoliths as well as other substrate surfaces at low temperature (75-95 °C) and pressure (1 atm). Using TiCl3 as the titanium source, H2O2 as the oxidant, and hydrochloric acid as the pH controller, a peroxotitanium complex (PTC) was formed and identified to play an essential role for the formation of LPT nanoarrays. The gaseous O2 released during the decomposition of PTC promotes the mass transfer of the precursors, making this method applicable to substrates with complex geometries. With the optimized conditions, a growth rate of 42 nm/min was achieved on cordierite monolith substrates. When loaded with Pt NPs, the LPT nanoarray-based monolithic catalysts showed excellent low-temperature catalytic activity for CO and hydrocarbon oxidation as well as satisfactory hydrothermal stability and mechanical robustness. The low temperature and pressure requirements of this facile hydrothermal method overcome the size- and pressure-seal restrictions of the reactors, making it feasible for scaled production of LPT nanoarray-based devices for various applications.