Tunable polarization beam splitter and broadband optical power sensor using hybrid microsphere resonators.

Based on silica microsphere resonators embedded with iron oxide nanoparticles, we proposed and fabricated an all-optical and continuously tunable polarization beam splitter (PBS), and a broadband optical power sensor (OPS) with high sensitivity. The PBS is realized since the effective refractive indexes of the transverse-electric and transverse-magnetic polarization modes in the microsphere resonator are different. Due to the excellent photothermal effect of iron oxide nanoparticles, we realized the all-optical and continuously tunable PBS based on the hybrid microsphere resonator. A maximum polarization splitting ratio of 20 dB and a tuning range of 5 nm are achieved. Based on this mechanism, the hybrid microsphere resonator can also be used as a broadband OPS. The sensitivity of the OPS is 0.487 nm/mW, 0.477 nm/mW, and 0.398 nm/mW when the probe wavelength is 690 nm, 980 nm, and 1550 nm, respectively. With such good performances, the tunable PBS and the broadband OPS have great potential in applications such as optical routers, switches and filters.

Tunable sub-kHz single-mode fiber laser based on a hybrid microbottle resonator.

We experimentally demonstrated an all-optical tunable sub-kHz single-mode fiber laser based on an ultrahigh-quality (Q)-factor hybrid microbottle resonator. The wavelength tunability is a very important function for fiber lasers, and the all-optical tuning method has rarely been proposed. Here, we use the iron-oxide-nanoparticle-coated silica microbottle resonator with a Q factor of 1.8×108 as the feedback element of the fiber ring laser and suppress the higher-order modes of the microresonator to achieve single-mode lasing with a linewidth of ∼500 Hz and a signal-to-noise ratio of 49 dB. Iron oxide nanoparticles are coated on the tapered area of the microbottle resonator and the control light is fed through the axial direction of the microbottle. The lasing wavelength of the fiber laser can be all-optically and linearly tuned with a range of 2.7 nm due to the strong photothermal effect of iron oxide nanoparticles. With such an excellent tunability and a narrow linewidth, this single-mode fiber laser has great potential in applications, such as optical spectroscopy, sensing, and signal processing.

Interfacial Shear Strength and Adhesive Behavior of Silk Ionomer Surfaces.

The interfacial shear strength between different layers in multilayered structures of layer-by-layer (LbL) microcapsules is a crucial mechanical property to ensure their robustness. In this work, we investigated the interfacial shear strength of modified silk fibroin ionomers utilized in LbL shells, an ionic-cationic pair with complementary ionic pairing, (SF)-poly-l-glutamic acid (Glu) and SF-poly-l-lysine (Lys), and a complementary pair with partially screened Coulombic interactions due to the presence of poly(ethylene glycol) (PEG) segments and SF-Glu/SF-Lys[PEG] pair. Shearing and adhesive behavior between these silk ionomer surfaces in the swollen state were probed at different spatial scales and pressure ranges by using functionalized atomic force microscopy (AFM) tips as well as functionalized colloidal probes. The results show that both approaches were consistent in analyzing the interfacial shear strength of LbL silk ionomers at different spatial scales from a nanoscale to a fraction of a micron. Surprisingly, the interfacial shear strength between SF-Glu and SF-Lys[PEG] pair with partially screened ionic pairing was greater than the interfacial shear strength of the SF-Glu and SF-Lys pair with a high density of complementary ionic groups. The difference in interfacial shear strength and adhesive strength is suggested to be predominantly facilitated by the interlayer hydrogen bonding of complementary amino acids and overlap of highly swollen PEG segments.

Drug-drug co-amorphous systems: An emerging formulation strategy for poorly water-soluble drugs.

Overcoming the poor water solubility of small-molecule drugs is a major challenge in the development of clinical pharmaceuticals. Amorphization of crystalline drugs is a highly effective strategy to improve their aqueous solubility. However, amorphous drugs are thermodynamically unstable and likely to crystallize during manufacturing and storage. Recently, drug-drug co-amorphous systems have emerged as a novel strategy to not only enable enhanced dissolution and physical stability of the individual drugs within the system but also to provide a strategy for combination therapy of the same or different clinical indications. This review serves to highlight advances in the methods used to manufacture and characterize drug-drug co-amorphous systems, summarize drug-drug co-amorphous applications reported in recent decades, and provide an outlook on future possibilities and perspectives.

Self-crosslinking hyaluronic acid hydrogel as an enteroprotective agent for the treatment of inflammatory bowel disease.

The pathological changes in inflammatory bowel disease (IBD) include the disruption of intestinal barrier function and the infiltration of pathogenic microbes. The application of an artificial protective barrier at the site of inflammation can prevent bacterial infiltration, promote epithelial cell migration, and accelerate wound healing. In this study, dopamine-modified hyaluronic acid (HA-DA) was developed as a bioadhesive self-cross-linkable hydrogel, which acted as an enteroprotective agent to promote the healing of inflamed intestinal tissue. The adhesion strength HA-DA to mouse colon was 3.81-fold higher than HA. Moreover, HA-DA promoted Caco-2 cell proliferation and migration as well as had a strong physical barrier effect after gelation. After oral administration, the HA-DA reduced weight loss and attenuated impaired goblet cell function in mice with dextran sodium sulfate-induced IBD. In addition, HA-DA promoted restoration of the epithelial barrier by the upregulation of tight junction proteins. The results reported herein substantiated that self-cross-linkable hydrogel-based enteroprotective agents are a promising approach for the treatment of IBD.

Hydrogen evolution boosted by moderate Co3ZnC with current densities beyond 1000 mA cm-2.

Co3ZnC can efficiently boost the activity of Co@N, O co-doped carbons for hydrogen evolution. The results show that moderate Co3ZnC plays key roles in achieving an appropriate weighted Co 3d band centre, enhancing charger transfer and thus optimizing the electrochemical active surface area. Thus, a low overpotential of ∼219 mV can drive a high current density of 1000 mA cm-2 under the favourable condition of moderate Co3ZnC.

Pop-Up Conducting Large-Area Biographene Kirigami.

We demonstrate the rapid, large-area transformation of bioenabled graphene laminates into multidimensional geometries for pop-up and stretchable applications. Water-vapor annealing facilitates the controlled plasticization of the multilayered silk-graphene morphologies, allowing highly localized kirigami cuts by programmable drag knife with diverse type and depth of cuts. By adjusting drag-knife depth, we can generate a microscale array of full and partial cuts, enabling a purely topological approach toward the control of metastable fold-unfold states and crack fracture paths in kirigami structures. Through orthogonal control over the graphene-silk composite's nanoscale morphology, cut pattern, and semimetal-like conductivity, we showcase bioenabled laminates as a platform for prospective soft and shape-transforming electronics as flexible interconnects and stretchable energy harvesters.

En Route to Practicality of the Polymer Grafting Technology: One-Step Interfacial Modification with Amphiphilic Molecular Brushes.

Surface modification with polymer grafting is a versatile tool for tuning the surface properties of a wide variety of materials. From a practical point of view, such a process should be readily scalable and transferable between different substrates and consist of as least number of steps as possible. To this end, a cross-linkable amphiphilic copolymer system that is able to bind covalently to surfaces and form permanently attached networks via a one-step procedure is reported here. This system consists of brushlike copolymers (molecular brushes) made of glycidyl methacrylate, poly(oligo(ethylene glycol) methyl ether methacrylate), and lauryl methacrylate, which provide the final product with tunable reactivity and balance between hydrophilicity and hydrophobicity. The detailed study of the copolymer synthesis and properties has been carried out to establish the most efficient pathway to design and tailor this amphiphilic molecular brush system for specific applications. As an example of the applications, we showed the ability to control the deposition of graphene oxide (GO) sheets on both hydrophilic and hydrophobic surfaces using GO modified with the molecular brushes. Also, the capability to tune the osteoblast cell adhesion with the copolymer-based coatings was demonstrated.

Highly Conductive and Transparent Reduced Graphene Oxide Nanoscale Films via Thermal Conversion of Polymer-Encapsulated Graphene Oxide Sheets.

Despite noteworthy progress in the fabrication of large-area graphene sheetlike nanomaterials, the vapor-based processing still requires sophisticated equipment and a multistage handling of the material. An alternative approach to manufacturing functional graphene-based films includes the employment of graphene oxide (GO) micrometer-scale sheets as precursors. However, search for a scalable manufacturing technique for the production of high-quality GO nanoscale films with high uniformity and high electrical conductivity is still continuing. Here we show that conventional dip-coating technique can offer fabrication of high quality mono- and bilayered films made of GO sheets. The method is based on our recent discovery that encapsulating individual GO sheets in a nanometer thick molecular brush copolymer layer allows for the nearly perfect formation of the GO layers via dip coating from water. By thermal reduction the bilayers (cemented by a carbon-forming polymer linker) are converted into highly conductive and transparent reduced GO films with a high conductivity up to 104 S/cm and optical transparency on the level of 90%. The value is the highest electrical conductivity reported for thermally reduced nanoscale GO films and is close to the conductivity of indium tin oxide currently in use for transparent electronic devices, thus making these layers intriguing candidates for replacement of ITO films.

Template-Guided Assembly of Silk Fibroin on Cellulose Nanofibers for Robust Nanostructures with Ultrafast Water Transport.

The construction of multilength scaled hierarchical nanostructures from diverse natural components is critical in the progress toward all-natural nanocomposites with structural robustness and versatile added functionalities. Here, we report a spontaneous formation of peculiar "shish kebab" nanostructures with the periodic arrangement of silk fibroin domains along straight segments of cellulose nanofibers. We suggest that the formation of these shish kebab nanostructures is facilitated by the preferential organization of heterogeneous (ß-sheets and amorphous silk) domains along the cellulose nanofiber driven by modulated axial distribution of crystalline planes, hydrogen bonding, and hydrophobic interactions as suggested by all-atom molecular dynamic simulations. Such shish kebab nanostructures enable the ultrathin membrane to possess open, transparent, mechanically robust interlocked networks with high mechanical performance with up to 30 GPa in stiffness and 260 MPa in strength. These nanoporous robust membranes allow for the extremely high water flux, up to 3.5 × 104 L h-1 m-2 bar-1 combined with high rejection rate for various organic molecules, capability of capturing heavy metal ions and their further reduction into metal nanoparticles for added SERS detection capability and catalytic functionalities.

Robust, Uniform, and Highly Emissive Quantum Dot-Polymer Films and Patterns Using Thiol-Ene Chemistry.

This work demonstrates a facile and versatile method for generating low scattering cross-linked quantum dot (QD)-polymer composite films and patterned highly emissive structures with ultrahigh QD loading, minimal phase separation, and tunable mechanical properties. Uniform QD-polymer films are fabricated using thiol-ene chemistry, in which cross-linked polymer networks are rapidly produced in ambient conditions via fast UV polymerization in bulk to suppress QD aggregation. UV-controlled thiol-ene chemistry limits phase separation through producing highly QD loaded cross-linked composites with loadings above majority of those reported in the literature (<1%) and approaching 30%. As the QD loading is increased, the thiol and ene conversion decreases, resulting in nanocomposites with widely variable and tailorable mechanical properties as a function of UV irradiation time with an elastic modulus decreasing to 1 GPa being characteristic of reinforced elastomeric materials, in contrast to usually observed stiff and brittle materials under these loading conditions. Furthermore, we demonstrate that the thiol-ene chemistry is compatible with soft-imprint lithography, making it possible to pattern highly loaded QD films while preserving the optical properties essential for high gain and low optical loss devices. The versatility of thiol-ene chemistry to produce high-dense QD-polymer films potentially makes it an important technique for polymer-based elastomeric optical metamaterials, where efficient light propagation is critical, like peculiar waveguides, sensors, and optical gain films.

Self-Powered Electronic Skin with Biotactile Selectivity.

Power-generating flexible thin films for facile detection of biotactile events are fabricated from patterned metal-graphene oxide biopaper. These tactile materials are mechanically robust with a consistent output of 1 V and high response rate of 20 Hz. It is demonstrated that the simple quadruple electronic skin sensitively and selectively recognizes nine spatial biotactile positions and can readily be expanded.

Dramatic Enhancement of Graphene Oxide/Silk Nanocomposite Membranes: Increasing Toughness, Strength, and Young's modulus via Annealing of Interfacial Structures.

We demonstrate that stronger and more robust nacre-like laminated GO (graphene oxide)/SF (silk fibroin) nanocomposite membranes can be obtained by selectively tailoring the interfacial interactions between "bricks"-GO sheets and "mortar"-silk interlayers via controlled water vapor annealing. This facial annealing process relaxes the secondary structure of silk backbones confined between flexible GO sheets. The increased mobility leads to a significant increase in ultimate strength (by up to 41%), Young's modulus (up to 75%) and toughness (up to 45%). We suggest that local silk recrystallization is initiated in the proximity to GO surface by the hydrophobic surface regions serving as nucleation sites for ß-sheet domains formation and followed by SF assembly into nanofibrils. Strong hydrophobic-hydrophobic interactions between GO layers with SF nanofibrils result in enhanced shear strength of layered packing. This work presented here not only gives a better understanding of SF and GO interfacial interactions, but also provides insight on how to enhance the mechanical properties for the nacre-mimic nanocomposites by focusing on adjusting the delicate interactions between heterogeneous "brick" and adaptive "mortar" components with water/temperature annealing routines.

Ultrarobust Transparent Cellulose Nanocrystal-Graphene Membranes with High Electrical Conductivity.

Ultra-robust nanomembranes possessing high mechanical strength combined with excellent stiffness and toughness rarely achieved in nanocomposite materials are presented. These are fabricated by alternately depositing 1D cellulose nanocrystals and 2D graphene oxide nanosheets by using a spin assisted layer-by-layer assembly technique. Such a unique combination of 1D and 2D reinforcing nanostructures results in layered nanomaterials.