Physiological roles of propolis and red ginseng nanoplatforms in alleviating dexamethasone-induced male reproductive challenges in a rat model.

BACKGROUND: Red ginseng and propolis are well-known antioxidants that have been related to a reduction in oxidative stress. OBJECTIVE: This study evaluated the efficiency of red ginseng and propolis, either in powder or as nano-forms against dexamethasone-induced testicular oxidative challenges in adult male albino rats. METHODS: Forty rats were divided into 8 equal groups including control negative group that was given vehicle (DMSO), control positive group that was administered dexamethasone in addition to the nano-propolis, nano-ginseng, nano-propolis + dexamethasone, nano ginseng+dexamethasone, propolis+dexamethasone and ginseng + dexamethasone groups. Serum, semen and tissue samples were obtained. RESULTS: Lower testosterone levels, higher levels of MDA, and lower levels of total antioxidant capacity in serum, as well as impaired semen quality and a disturbed histopathological picture of both the testis and seminal glands, were all observed as significant negative effects of dexamethasone. These findings were confirmed by lower gene expression profiles of CYP11A1, StAR, HSD-3b, Nrf-2 and ACTB-3b in testicular and seminal gland tissues. The most powerful anti-dexamethasone effects were obtained with either propolis in nanoform or conventional ginseng. CONCLUSION: Propolis nano-formulation and ginseng in conventional form could be considered excellent candidates to ameliorate the oxidative stress provoked by dexamethasone, however, neither nano-ginseng nor conventional propolis showed such effects.

Zonulin and copeptin relation to some metabolic markers in school-aged obese children.

BACKGROUND: Using Zonulin and Copeptin as potential obesity markers in children, hasn't yet been focused. AIM: To evaluate the association between serum levels of both Zonulin and Copeptin with the obesity markers, and to assess their role as metabolic disturbance predictors in obese children. METHODS: A case-control study comprised 111 Egyptian children (45 males and 66 females); aged 6-10 years to avoid the effect of puberty (prepubertal). They were classified according to their body mass index (BMI) percentiles into: 72 obese (BMI ≥ 95th ), and 39 control ones (BMI > 15th - <85th ), based on the Egyptian Growth Charts for children and adolescents. Anthropometric parameters and blood pressure were measured, and body composition analysis, lipid profile, Zonulin, and Copeptin levels were assessed. RESULTS: The obese group showed a significantly higher value of Copeptin and a lower value of Zonulin than the control one Also, the obese group showed significant negative correlations between Zonulin and both anthropometric obesity markers and body composition, whereas Copeptin showed significant positive ones. Moreover, significant positive correlations were found between Copeptin and both body weight and fat distribution. Insignificant correlations were observed between both serum Zonulin and Copeptin levels and blood pressure and lipid profile. CONCLUSION: Zonulin and Copeptin cannot be used as metabolic disturbance predictors, among Egyptian children, as they were insignificantly correlated with lipid profile or blood pressure.

Unveiling the Impact of Eco-Friendly Synthesized Nanoparticles on Vegetative Growth and Gene Expression in Pelargonium graveolens and Sinapis alba L.

Nanoscale geranium waste (GW) and magnesium nanoparticle/GW nanocomposites (Mg NP/GW) were prepared using green synthesis. The Mg NP/GW samples were subjected to characterization using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR-FT). The surface morphology of the materials was examined using a scanning electron microscope (SEM), and their thermal stability was assessed through thermal gravimetric analysis (TG). The BET-specific surface area, pore volume, and pore size distribution of the prepared materials were determined using the N2 adsorption-desorption method. Additionally, the particle size and zeta potentials of the materials were also measured. The influence of the prepared nanomaterials on seed germination was intensively investigated. The results revealed an increase in seed germination percent at low concentrations of Mg NP/GWs. Upon treatment with Mg NP/GW nanoparticles, a reduction in the mitotic index (MI) was observed, indicating a decrease in cell division. Additionally, an increase in chromosomal abnormalities was detected. The efficacy of GW and Mg NP/GW nanoparticles as new elicitors was evaluated by studying their impact on the expression levels of the farnesyl diphosphate synthase (FPPS1) and geranylgeranyl pyrophosphate (GPPS1) genes. These genes play a crucial role in the terpenoid biosynthesis pathway in Sinapis alba (S. alba) and Pelargonium graveolens (P. graveolens) plants. The expression levels were analyzed using reverse transcription-quantitative polymerase chain reaction (RT-qPCR) analysis. The qRT-PCR analysis of FPPS and GPPS gene expression was performed. The outputs of FPPS1 gene expression demonstrated high levels of mRNA in both S. alba and P. graveolens with fold changes of 25.24 and 21.68, respectively. In contrast, the minimum expression levels were observed for the GPPS1 gene, with fold changes of 11.28 and 6.48 in S. alba and P. graveolens, respectively. Thus, this study offers the employment of medicinal plants as an alternative to fertilizer usage resulting in promoting environmental preservation, optimal waste utilization, reducing water consumption, and cost reduction.

Anti-inflammatory and anti-oxidant activities of mesenchymal stem cells in chemically induced arthritic rats.

BACKGROUND: Mesenchymal stem cells (MSCs) have been extensively used as cell-based treatments for decades due to their anti-inflammatory, immunomodulatory, and healing abilities. The intent of our study was to determine the efficacy of MSCs in alleviating rheumatoid arthritis (RA) induced by Complete Freund's adjuvant (CFA) and to investigate the anti-inflammatory and antioxidant characteristics of MSCs. METHODS AND RESULTS: Intrapedally injecting 0.1 ml of CFA directly into the footpad of the right hind paw daily for 2 days was used to induce RA. Arthritic rats received four doses of MSCs (1 × 106 cells/rat/dose) intravenously through the lateral tail vein. Our results showed that arthritic rats treated with MSCs exhibited reduced levels of paw edema. Furthermore, arthritic rats treated with MSCs exhibited a significant decrease in the levels of RF, CRP, IL-1ß, TNF-α, IL-17 and ADAMTS-5, along with a significant increase in the levels of IL-4 and TIMP-3. Additionally, MSCs significantly reduced the expression of TGF-ß. Both the glutathione (GSH) content and antioxidant activity of GST were enhanced by MSCs, while LPO levels were suppressed. CONCLUSION: These findings provide further evidence that MSCs are valuable in treating RA, possibly due to their anti-inflammatory and anti-oxidative properties. Thus, MSCs have potential as a more effective therapeutic strategy for treating RA.

Formation of electroactive biofilms derived by nanostructured anodes surfaces.

Microbial fuel cells (MFCs) have significant interest in the research community due to their ability to generate electricity from biodegradable organic matters. Anode materials and their morphological structures play a crucial role in the formation of electroactive biofilms that enable the direct electron transfer. In this work, modified electrodes with nanomaterials, such as multiwalled carbon nanotubes (MWCNTs), reduced graphene oxide (rGO), Al2O3/rGO or MnO2/MWCNTs nanocomposites were synthesized, characterized and utilized to support the growth of electrochemically active biofilms. The MFC's performance is optimized using anode-respiring strains isolated from biofilm-anode surface, while the adjusted operation is conducted with the consortium of (Enterobacter sp.). Besides the formation of matured biofilm on its surface, MnO2/MWCNTs nanocomposite produced the highest electrical potential outputs (710 mV) combined with the highest power density (372 mW/m2). Thus, a correlation between the anode nanostructured materials and the progression of the electrochemically active biofilms formation is presented, allowing new thoughts for enhancing the MFC's performance for potential applications ranging from wastewater treatment to power sources.

Design, preparation, and performance of different adsorbents based on carboxymethyl chitosan/sodium alginate hydrogel beads for selective adsorption of Cadmium (II) and Chromium (III) metal ions.

Developing cost-effective and efficient adsorbents for heavy metals in multicomponent systems is a challenge that needs to be resolved to meet the challenges of wastewater treatment technology. Two adsorbents were synthesized, characterized, and investigated for the removal of Cd2+ and Cr3+ as model heavy metals in their single and binary solutions. The first adsorbent (ACZ) was a nanocomposite formed of O-Carboxymethyl chitosan, sodium alginate, and zeolite. While, the other (ACL) contained ZnFe layered double hydroxides instead of the zeolite phase. Adsorbents were characterized using XRD, FTIR, SEM, and swelling degree analysis. For single heavy metal adsorption isotherms, data for both adsorbents was best fitted and indicated a multilayer adsorption nature. For binary adsorption, Langmuir model with interacting parameters showed the best results compared to other models for both pollutants. For single system, Avrami model was found to be the best model representing the adsorption kinetics data, which indicates that the mechanism of adsorption follows multiple kinetic orders that may change during duration of adsorption process. Numerous interaction mechanisms can occur between the heavy metals and functional groups in the synthesized hydrogels such as NH2, COOH, and OH groups leading to efficient adsorption of metal ions.

Consecutive high-performance removal of Cu2+ metal ions and Deltamethrin using multifunctional pyrolysis cuttlebone/cotton fabric nanocomposite.

A simple technique was developed for the modification of cotton materials that is inexpensive, environmentally friendly, and very effective. Waste Cotton fabrics (WCFs) are loaded with propolis extract (PE) for Cu2+ removal. Then, Cu2+ underwent a pyrolysis process with modified cuttlebone (CB) at 900 °C for 5 h. The surface of the prepared materials was characterized using X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), Fourier transform infrared (FTIR), BET, particle sizes, thermogravimetric analysis (TGA) and zeta potential analysis. The Cu2+ metal ions from an aqueous solution were removed using WCFs/PE, and DLM was subsequently removed using pyro WCFs/PE/Cu/CB. The as-prepared NPs exhibited the face-centered cubic structure of WCFs/PE/Cu/CB with crystallite sizes ranging from 386.70 to 653.10 nm. FTIR spectra revealed that CB was present on the surface of the resulting WCFs/PE/Cu. SEM revealed the dispersion of a uniformly flower-like morphology over a large area. Sorption studies were performed based on parameters that included pH, dose, contact time, and initial concentration. The adsorption isotherm and the kinetic studies of the DLM adsorption process were applied at a pH of 5.0 and a temperature of 25 °C using several isotherms and kinetic models. The results revealed qmax (20.51 mg/g) with R2 = 0.97, the Langmuir isotherm that best matches the experimental data. Hence, the Langmuir isotherm suggests that it is the model that best describes sorption on homogenous surfaces or surface-supporting sites with various affinities. The correlation coefficient R2, χ2, adjusted correlation coefficient, and error functions like root mean square (RMSE), normalized root mean square error (NRMES), and mean absolute error (MAE) were used to evaluate the best-fit models to the experimental adsorption data. Moreover, cost estimation for the prepared adsorbent WCFs/PE/Cu showed that it costs approximately 3 USD/g, which is a cheap adsorbent compared to other similar adsorbents reported in the literature. The examined WCFs/PE have significant applicability potential for Cu2+-laden wastewater treatment due to their superior Cu2+ metal ions adsorption capability and reusability. The cytotoxicity and safety study showed that at higher concentrations, it resulted in much less cell viability. Additionally, the removal efficiency of Cu2+ metal ions from synthetic, realistic industrial wastewater using WCFs/PE reached up to 96.29 %, demonstrating good adsorption capability. Thus, there is a huge possibility of accomplishing this and performing well. This study paves the way for the reuse and valorization of selected adsorbents following circular economy principles. Two green metrics were applied, the Analytical Eco-scale and the Analytical GREEnness Calculator (AGREE).

Electronic, mechanical, and thermal properties of zirconium dioxide nanotube interacting with poly lactic-co-glycolic acid and chitosan as potential agents in bone tissue engineering: insights from computational approaches.

For the first time, the interaction of the Poly lactic-co-glycolic acid (PLGA) and Chitosan (CH) with Zirconium dioxide (ZrO2) nanotube was studied using density functional theory (DFT). The binding energies of the most stable configurations of PLGA and CH monomers absorbed on ZrO2 were calculated using density functional theory (DFT) methods. The obtained results indicate that both CH and PLGA monomers were chemisorbed on the surface of ZrO2. The interaction between PLGA and ZrO2 is stronger than that of CH due to its shorter equilibrium interval and higher binding energy. In addition, the electronic density of states (DOS) of the most stable configuration was computed to estimate the electronic properties of the PLGA/CH absorbed on ZrO2. Also, the molecular dynamics (MD) simulations were computed to investigate the mechanical properties of all studied compounds in individual and nanocomposite phases. MD simulation revealed that the shear and bulk moduli of PLGA, CH as well as Young's modulus increase upon interacting with the ZrO2 surface. As a result, the mechanical properties of PLGA and CH are improved by adding ZrO2 to the polymer matrix. The results showed that the elastic modulus of PLGA and CH nanocomposites decreased with increasing temperature. These findings indicate that PLGA-ZrO2 nanocomposites have mechanical and thermal properties, suggesting that they could be exploited as potential agents in biomedical sectors such as bone tissue engineering and drug delivery.Communicated by Ramaswamy H. Sarma.

Experimental insights and modeling innovations: Deciphering Fe(VI) oxidation in imidazole ionic liquids through QSAR and RFR.

In this investigation, we conducted a detailed analysis of the oxidation of 16 imidazole ionic liquid variants by Fe(VI) under uniform experimental setups, thereby securing a dataset of second-order reaction rate constants (kobs). This methodology ensures superior data consistency and comparability over traditional methods that amalgamate disparate data from varied studies. Utilizing 16 chemical structural parameters obtained via Density Functional Theory (DFT) as descriptors, we developed a Quantitative Structure Activity Relationship (QSAR) model. Through rigorous correlation analysis, Principal Component Analysis (PCA), Multiple Linear Regression (MLR), and Applicability Domain (AD) evaluation, we identified a pronounced negative correlation between the molecular orbital gap energy (Egap) and kobs. MLR analysis further underscored Egap as a pivotal predictive variable, with its lower values indicating heightened oxidative reactivity towards Fe(VI) in the ionic liquids, leading the QSAR model to achieve a predictive accuracy of 0.95. Furthermore, we integrated an advanced machine learning approach - Random Forest Regression (RFR), which adeptly highlighted the critical factors influencing the oxidation efficiency of imidazole ionic liquids by Fe(VI) through elaborate decision trees, feature importance assessment, Recursive Feature Elimination (RFE), and cross-validation strategies. The RFR model demonstrated a remarkable predictive performance of 0.98. Both QSAR and RFR models pinpointed Egap as a key descriptor significantly affecting oxidation efficiency, with the RFR model presenting lower root mean square errors, establishing it as a more reliable predictive tool. The application of the RFR model in this study significantly improved the model's stability and the intuitive display of key influencing factors, introducing promising advanced analytical tools to the field of environmental chemistry.

Transformation and Degradation of PAH Mixture in Contaminated Sites: Clarifying Their Interactions with Native Soil Organisms.

Soil contamination of polycyclic aromatic hydrocarbons (PAHs), especially caused by the mixture of two or more PAHs, raised great environmental concerns. However, research on the migration and transformation processes of PAHs in soils and their interactions with native communities is limited. In this work, soil samples from uncontaminated sites around the industrial parks in Handan, Hengshui, and Shanghai were artificially supplemented with three concentrations of anthracene (Ant), 9-chloroanthracene (9-ClAnt), benzopyrene (BaP), and chrysene (Chr). Ryegrass was planted to investigate the degradation of PAHs and its interaction with native soil organisms in the constructed ryegrass-microbe-soil microcosmic system. The bacterial and fungal communities in soil were affected by PAHs; their species diversity and relative abundance changed after exposure to different concentrations of PAHs, among which Lysobacter, Bacillus, Pseudomonas, and Massilia bacteria were correlated to the degradation of PAHs. On the 56th day, the contents of BaP, Chr, and Ant decreased with the degradation process, while the degradation of 9-ClAnt was limited. Nineteen intermediates, including hydroxylation and carboxylated compounds, were identified. The present research would help clarify the potential interactions between PAHs and native organisms in contaminated sites, providing fundamental information for evaluating the transformation risks of PAHs in the natural environment.

Efficient degradation of benzalkonium chloride (BAC) by zero-valent iron activated persulfate: Kinetics, reaction mechanisms, theoretical calculations and toxicity evolution.

The present study systematically investigated the elimination of benzalkonium chloride (BAC) in the zero valent iron activated persulfate (Fe0/PS) system. The influence of operational parameters, including PS concentration, Fe0 dosage and pH, were investigated through a series of kinetic experiments. When the Fe0 dosage was 5.0 mM, the initial ratio of [PS]:[BAC] was 10:1, the degradation efficiency could achieve 91.7% at pH 7.0 within 60 min. Common inorganic anions and humic acid did not significantly affect BAC degradation, implying that Fe0/PS system had a potential application prospect in the actual wastewater remediation. Based on the electron paramagnetic resonance test and quenching experiments, the BAC degradation was found to be contributed by •OH, SO4•- and Fe(IV). A total of 23 intermediates were identified by the liquid chromatography-mass spectrometry, and the degradation pathways were proposed accordingly, including dealkylation and demethylation, hydroxylation, sulfate substitution and benzyl C-N cleavage reactions. Density functional theory based calculations were conducted to realize the rationality of the proposed reaction mechanisms. The toxicity of transformation products was predicted by ECOSAR program. This work demonstrated the possibility of BAC removal in hospital and municipal wastewater by Fe0/PS treatment, and also provides a safe choice for deep treatment of quaternary ammonium salt wastewater.

Co/Ni/Cu-NH2BDC MOF@natural Egyptian zeolite ore nanocomposite for calcium ion removal in water softening applications.

Water softening is a treatment process required to remove calcium (Ca(II)) and magnesium (Mg(II)) cations from water streams. Nanocomposites can provide solutions for such multiple challenges and have high performance and low application costs. In this work, a multimetallic cobalt, nickel, and copper 2-aminoterephthalic acid metal-organic framework ((Co/Ni/Cu-NH2BDC) MOF) was synthesized by a simple solvothermal technique. This MOF was supported on an Egyptian natural zeolite ore and was used for the adsorption of Ca(II) ions for water-softening applications. The adsorbent was characterized using Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), N2 adsorption-desorption isotherms, and zeta potential measurements. The adsorption isotherm data for the prepared adsorbent toward Ca(II) were best fit using the Redlich-Peterson model and showed a maximum adsorption capacity of 88.1 mg/g. The adsorption kinetics revealed an equilibrium time of 10 min, which was best fit using the Avrami model. The intermolecular interactions of Ca(II) ions with zeolite and MOF were investigated by Monte Carlo simulations, molecular dynamics simulations, and FTIR and XRD analyses. The adsorption sites in the zeolite structure were oxygen atoms, while those in the MOF structure were amine nitrogen atoms. The Ca(II) ions are coordinated with the solvent molecules in both structures. Finally, the in vitro cytotoxicity of this nanocomposite was assessed, revealing viability levels of 74.57 ± 2.1% and 21 ± 2.79% for Vero and African green monkey kidney and human liver (HepG2) cells, respectively. Cytotoxicity assays help assess the environmental impact of these materials, ensuring that they do not harm aquatic organisms or disrupt ecosystems. Thus, this study demonstrated the valorization of MOF/zeolite as a valuable and industry-ready adsorbent that can appropriate Ca(II) contaminants from aqueous streams.

Antifungal and antibacterial investigation of quinary Zr Al Fe Co Ni layered double hydroxide and its Al Fe Co Ni quaternary and Fe Co Ni tertiary roots.

Layered double hydroxides (LDH) are promising 2D nanomaterials being investigated for several engineering and biomedical applications. In this work, quinary Zr Al Fe Co Ni LDH and its Al Fe Co Ni LDH quaternary and Fe Co Ni LDH tertiary roots were prepared and characterized. All samples showed an aggregated, layered morphology with zero surface charge and approximately 300 nm of hydrodynamic size. BET surface area of Al Fe Co Ni LDH showed a remarkable value of 143.25 m2 g-1 as opposed to 26.2 m2 g-1 and 45.4 m2 g-1 for Fe Co Ni LDH and Zr Al Fe Co Ni LDH, respectively. The antimicrobial activity of the prepared samples was assessed against the many pathogenic bacteria; Bacillus (B.) subtilis, Escherichia (E.) coli, Haemophilus (H.) influenza, Listeria (L.) monocytogenes, Staphylococcus (S.) aureus, and Streptococcus (St.) pneumonia, and six fungal species. Furthermore, anti-biofilm activity, growth curve assay, and effect of UV illumination were examined against various pathogenic microbes. Zr Al Fe Co Ni displayed remarkable antibacterial activity, as indicated by the lowest values of the minimum inhibitory concentrations (MIC) of 4-166.7 µg mL-1. Results for fungal strains varied in terms of their susceptibilities for the different samples tested. Zn Al Fe Co Ni was able to inhibit the biofilm formation of S. aureus (96.09%), E. coli (98.32%), and Candida (C.) albicans (95.93%). This study shown that certain LDH categories, particularly Zr Al Fe Co Ni, may be promising antibacterial agents against variety of pathogenic microorganisms that cause serious infections.

Cellulose-based CoFe LDH composite as a nano-adsorbent for sulfamethoxazole and cefixime residues: Evaluation of performance, green metrics and cytotoxicity.

The increase in antibiotic residues poses a serious threat to ecological and aquatic environments, necessitating the development of cost-effective, convenient, and recyclable adsorbents. In our study, we used cellulose-based layered double hydroxide (LDH) as an efficient adsorbent and nanocarrier for both sulfamethoxazole (SMX) and cefixime (CFX) residues due to their biodegradability and biocompatibility. Chemical processes are measured according to green chemistry metrics to identify which features adhere to the principles. A GREEnness Assessment (ESA), Analytical GREEnness Preparation (AGREEprep), and Analytical Eco-Scale Assessments (ESA) were used to assess the suitability of the proposed analytical method. We extensively analyzed the synthesized CoFe LDH/cellulose before and after the adsorption processes using XRD, FTIR, and SEM. We investigated the factors affecting the adsorption process, such as pH, adsorbent dose, concentrations of SMX and CFX and time. We studied six nonlinear adsorption isotherm models at pH 5 using CoFe LDH, which showed maximum adsorption capacities (qmax) of 272.13 mg/g for SMX and 208.00 mg/g for CFX. Kinetic studies were also conducted. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay was performed on Vero cells in direct contact with LDH nanocomposites to evaluate the cytotoxicity and side effects of cellulose-based CoFe LDH. The cellulose-based CoFe LDH nanocomposite demonstrated excellent cytocompatibility and less cytotoxic effects on the tested cell line. These results validate the potential use of these unique LDH-based cellulose cytocompatible biomaterials for water treatment applications. The cost of the prepared adsorbents was investigated.

Investigation of ternary Zn-Co-Fe layered double hydroxide as a multifunctional 2D layered adsorbent for moxifloxacin and antifungal disinfection.

Layered double hydroxides have recently gained wide interest as promising multifunctional nanomaterials. In this work, a multifunctional ternary Zn-Co-Fe LDH was prepared and characterized using XRD, FTIR, BET, TEM, SEM, and EDX. This LDH showed a typical XRD pattern with a crystallite size of 3.52 nm and a BET surface area of 155.9 m2/g. This LDH was investigated, for the first time, as an adsorbent for moxifloxacin, a common fluoroquinolones antibiotic, showing a maximum removal efficiency and equilibrium time of 217.81 mg/g and 60 min, respectively. Its antifungal activity, for the first time, was investigated against Penicillium notatum, Aspergillus flavus, Aspergillus fumigatus, Aspergillus niger, and Mucor fungi at various concentrations (1000-1.95 µg/mL). This LDH was found to be effective against a variety of fungal strains, particularly Penicillium and Mucor species and showed zones of inhibition of 19.3 and 21.6 mm for Penicillium and Mucor, respectively, with an inhibition of 85% for Penicillium species and 68.3% for Mucormycosis. The highest antifungal efficacy results were obtained at very low MIC concentrations (33.3 and 62 µg/ml) against Penicillium and Mucor, respectively. The results of this study suggest a promising multifunctional potential of this LDH for water and wastewater treatment and disinfection applications.

Carbon supported ternary layered double hydroxide nanocomposite for Fluoxetine removal and subsequent utilization of spent adsorbent as antidepressant.

Fluoxetine (FLX) is one of the most persistent pharmaceuticals found in wastewater due to increased use of antidepressant drugs in recent decades. In this study, a nanocomposite of ternary ZnCoAl layered double hydroxide supported on activated carbon (LAC) was used as an adsorbent for FLX in wastewater effluents. The nanocomposite was characterized using Fourier Transform Infrared Spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and surface area analysis (BET). The adsorption investigations showed that the maximum removal capacity was achieved at pH 10, with a 0.1 g/L adsorbent dose, 50 mL volume of solution, and at a temperature of 25 °C. The FLX adsorption process followed the Langmuir-Freundlich model with a maximum adsorption capacity of 450.92 mg/g at FLX concentration of 50 µg/mL. Density functional theory (DFT) computations were used to study the adsorption mechanism of FLX and its protonated species. The safety and toxicity of the nanocomposite formed from the adsorption of FLX onto LAC (FLX-LAC) was investigated in male albino rats. Acute toxicity was evaluated using probit analysis after 2, 6, and 24 h to determine LD50 and LD100 values in a rat model. The FLX-LAC (20 mg/kg) significantly increased and lengthened the sleep time of the rats, which is important, especially with commonly used antidepressants, compared to the pure standard FLX (7 mg/kg), regular thiopental sodium medicine (30 mg/kg), and LAC alone (9 mg/kg). This study demonstrated the safety and longer sleeping duration in insomniac patients after single-dose therapy with FLX-LAC. Selective serotonin reuptake inhibitors (SSRIs) like FLX were found to have decreased side effects and were considered the first-line mood disorder therapies.

Nitrogen-doped carbon quantum dots as a novel treatment for black fungal bone infections (Mucormycosis): in vitro and in vivo study.

Most fungal bone and joint infections (arthritis) are caused by Mucormycosis (Mucor indicus). These infections may be difficult to treat and may lead to chronic bone disorders and disabilities, thus the use of new antifungal materials in bone disorders is vital, particularly in immunocompromised individuals, such as those who have contracted coronavirus disease 2019 (COVID-19). Herein, we reported for the first time the preparation of nitrogen-doped carbon quantum dots (N/CQDs) and a nitrogen-doped mesoporous carbon (N/MC) using a quick micro-wave preparation and hydrothermal approach. The structure and morphology were analysed using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and surface area analyser. Minimum inhibitory concentration (MIC), disc diffusion tests, minimum fungicidal concentration (MFC) and antifungal inhibitory percentages were measured to investigate the antifungal activity of N/CQDs and N/MC nanostructures. In addition to the in vivo antifungal activity in rats as determined by wound induction and infection, pathogen count and histological studies were also performed. According to in vitro and in vivo testing, both N/CQDs with small size and N/MC with porous structure had a significant antifungal impact on a variety of bone-infecting bacteria, including Mucor infection. In conclusion, the present investigation demonstrates that functional N/CQDs and N/MC are effective antifungal agents against a range of microbial pathogenic bone disorders in immunocompromised individuals, with stronger and superior fungicidal activity for N/CQDs than N/MC in vitro and in vivo studies.

Microalgal-based macro-hollow loofah fiber bio-composite for methylene blue removal: A promising step for a green adsorbent.

This study looked into how well the macro-hollow loofah fiber with and without the bio-attaching with green microalga (Chlamydomonas reinhardtii OR242521) was applied methylene blue elimination from water. Based on the results, the biosorption capacity of loofah sponge for methylene blue significantly increased with the increase of contact time, weight of microalgal biofilm, and methylene blue concentration. The maximum biosorption capacity was achieved after 120 min, after 0.042 mgg-1 biofilm weight, and MB concentration of 140 mgL-1. Furthermore, methylene blue's biosorption capacity was strongly affected by pH, reaching its maximum at pH 7. The biosorption capacity of the bio-attached loofah sponge was much higher than that of the loofah sponge, revealing that the microalgae bio-attachment enhanced the biosorption capacity of the loofah sponge. At the end of the MB biosorption process, the used bio-attached loofah sponge can still be utilized once more for the same purpose after the desorption of MB but with a lower biosorption capacity. Furthermore, the loofah sponge could also be applied as a bio-sorbent after domestic use. According to this study, the loofah sponge with or without algal biofilm attachment could be applied as a low-cost efficient bio-sorbent for methylene blue removal from water. However, the loofah sponge's ability for biosorption was dramatically increased by the bio-attachment of microalgae, making it a more potent bio-sorbent. Likewise, this study offers insights into the variables influencing the biosorption capacity of loofah sponges and bio-attached loofah sponges, which could be beneficial for enhancing the biosorption processes.

Cost estimation of synthesis and utilization of nano-adsorbents on the laboratory and industrial scales: A detailed review.

The recent regulations pertaining to the circular economy have unlocked new prospects for researchers. In contrast to the unsustainable models associated with the linear economy, integration of concepts of circular economy braces reducing, reusing, and recycling of waste materials into high-end products. In this regard, adsorption is a promising and cost-effective water treatment technology for handling conventional and emerging pollutants. Numerous studies are published annually to investigate the technical performance of nano-adsorbents and nanocomposites in terms of adsorption capacity and kinetics. Yet, economic performance evaluation is rarely discussed in the literature. Even if an adsorbent shows high removal efficiency towards a specific pollutant, its high preparation and/or utilization costs might hinder its real-life use. This tutorial review aims at illustrating cost estimation methods for the synthesis and utilization of conventional and nano-adsorbents. The current treatise discusses the synthesis of adsorbents on a laboratory scale where the raw material, transportation, chemical, energy, and any other costs are discussed. Moreover, equations for estimating the costs at the large-scale adsorption units for wastewater treatment are illustrated. This review focuses on introducing these topics to non-specialized readers in a detailed but simplified manner.

Green UPLC method for estimation of ciprofloxacin, diclofenac sodium, and ibuprofen with application to pharmacokinetic study of human samples.

Investigation of a unique and fast method for the determination and separation of a mixture of three drugs viz., ciprofloxacin (CIP), Ibuprofen (IBU), and diclofenac sodium (DIC) in actual samples of human plasma. Also, the technique was used to look at their pharmacokinetics study. Hydrocortisone was chosen as the internal standard (IS). The drugs were chromatographically separated using an Acquity ultra-performance liquid chromatography UPLC ® BEH C18 1.7 µm (2.1 × 150 mm) column with a mobile phase composed of acetonitrile: water (65:35, v/v) adjusted to pH 3 with diluted acetic acid. Plasma proteins were precipitated with acetonitrile. The separated drugs ranged from 0.3 to 10, 0.2-11, and 1-25 µg/mL for CIP, IBU, and DIC, respectively. Calibration curves were discovered to achieve linearity with acceptable correlation coefficients (0.99%). Examination of quality assurance samples showed exceptional precision and accuracy. Following the successful application of this improved technique to plasma samples, the pharmacokinetic characteristics of each selected drug were evaluated using (UPLC) with UV detection at 210 nm. Two green metrics were applied, the Analytical Eco-scale and the Analytical GREEnness Calculator (AGREE). Separation was achieved in only 4-min analysis time. The method's validation agreed with the requirements of the FDA, and the results were sufficient.