Photoresponsive Prion-Mimic Foldamer to Induce Controlled Protein Aggregation.

Proteins reconfigure their 3D-structure, and consequently their function, under the control of specific molecular interactions that sense, process and transmit information from the surrounding environment. When this fundamental process is hampered, many pathologies occur as in the case of protein misfolding diseases. In this work, we follow the early steps of α-synuclein (aS) aggregation, a process associated with Parkinson's disease etiopathogenesis, that is promptly promoted by a light-mediated binding between the protein and a photoactive foldamer. The latter can switch between two conformations, one of which generates supramolecular fibrillar seeds that act as molecular templates able to induce a fast ß-sheet transition for aS monomers that successively undergo fibrillar polymerization. The proposed method represents a powerful tool to study protein aggregation relevant to misfolding diseases in a controlled and inducible system.

Effect on the Conformation of a Terminally Blocked, (E) ß,γ-Unsaturated δ-Amino Acid Residue Induced by Carbon Methylation.

Peptides are well-known to play a fundamental therapeutic role and to represent building blocks for numerous useful biomaterials. Stabilizing their active 3D-structure by appropriate modifications remains, however, a challenge. In this study, we have expanded the available literature information on the conformational propensities of a promising backbone change of a terminally blocked δ-amino acid residue, a dipeptide mimic, by replacing its central amide moiety with an (E) Cß═Cγ alkene unit. Specifically, we have examined by DFT calculations, X-ray diffraction in the crystalline state, and FT-IR absorption/NMR spectroscopies in solution the extended vs folded preferences of analogues of this prototype system either unmodified or possessing single or multiple methyl group substituents on each of its four -CH2-CH═CH-CH2- main-chain carbon atoms. The theoretical and experimental results obtained clearly point to the conclusion that increasing the number of adequately positioned methylations will enhance the preference of the original sequence to fold, thus opening interesting perspectives in the design of conformationally constrained peptidomimetics.

Oligopeptide Helical Conformations Control Gold Nanoparticle Cross-Linking.

Peptide sequences functionalized with primary amines at the N- and C-terminus are able to induce the aggregation of gold nanoparticles in ethanol as a consequence of their folding into a helical conformation. Random coil peptides are unable to induce such an aggregation process. Aggregation can be monitored spectrophotometrically by following the shift of the surface plasmon resonance (SPR) band of the nanoparticles and is confirmed by transmission electron microscopy and dynamic light scattering analyses. Partial denaturation of the peptides results in diminished cross-linking ability. The helicity parameter θ222 /θ208 correlates fairly well with the shift of the SPR band to longer wavelengths, supporting the relationship between the amount of helical content of a peptide sequence and its ability to induce aggregation.

Intrinsically Photoswitchable α/ß Peptides toward Two-State Foldamers.

A simple, unsaturated, E-Z photoisomerizable ß-amino acid, (Z)-3-aminoprop-2-enoic acid, has been introduced into peptide foldamers through a one-pot chemical coupling, based on Pd/Cu-catalyzed olefin oxidative amidation, between two peptide segments carrying, respectively, a -Gly-NH2 residue at the C-terminus and an acryloyl group at the N-terminus. Reversible conversion between the Z and E configurations of the 3-aminoprop-2-enoic linkage was achieved photochemically. A crystallographic analysis on two model compounds shed light on the consequences, in terms of 3D structure and self-association properties, brought about by the different configuration of the unsaturated linkage. As a proof of concept, E-Z photoisomerization of a 3-aminoprop-2-enoic acid residue, inserted as the junction between two conformationally distinct peptide domains (one helical while the other ß-sheet promoter), allowed supramolecular self-association to be reversibly turned on/off.

Tuning morphological architectures generated through living supramolecular assembly of a helical foldamer end-capped with two complementary nucleobases.

Two appropriately functionalized nucleobases, thymine and adenine, have been covalently linked at the N- and C-termini, respectively, of two α-aminoisobutyric acid-rich helical peptide foldamers, aiming at driving self-assembly through complementary recognition. A crystal-state analysis (by X-ray diffraction) on the shorter, achiral foldamer 1 unambiguously shows that adeninethymine base pairing, through Watson-Crick intermolecular H-bonding, does take place between either end of each peptide molecule. In the crystals, π-stacking between base pairs is also observed. Evidence for time-dependent foldameroldamer associations for the longer, chiral foldamer 2 in solution is provided by circular dichroism measurements. The self-assembly of foldamer 2, through living supramolecular polymerization, eventually leads to the formation of twisted fibers. Such a supramolecular organization can be affected by addition of either pristine adenine or thymine, that acts as a "terminator" by selectively matching a pairing nucleobase at one end of the foldamer. The co-assembly of foldamer 2 with a porphyrin-derivatized thymine, under appropriate experimental conditions, leads to the formation of vesicles which, in turn, can be converted to the fiber morphology by changing the environmental polarity. Conversely, dendrimeric, star polymer-like microstructures are generated when the supramolecular assembly of foldamer 2 is seeded by adenine-capped gold nanoparticles.

En route towards the peptide γ-helix: X-ray diffraction analyses and conformational energy calculations of Adm-rich short peptides.

We performed the solution-phase synthesis of a set of model peptides, including homo-oligomers, based on the 2-aminoadamantane-2-carboxylic acid (Adm) residue, an extremely bulky, highly lipophilic, tricyclic, achiral, Cα -tetrasubstituted α-amino acid. In particular, for the difficult peptide coupling reaction between two Adm residues, we took advantage of the Meldal's α-azidoacyl chloride approach. Most of the synthesized Adm peptides were characterized by single-crystal X-ray diffraction analyses. The results indicate a significant propensity for the Adm residue to adopt γ-turn and γ-turn-like conformations. Interestingly, we found that a -CO-(Adm)2 -NH- sequence is folded in the crystal state into a regular, incipient γ-helix, at variance with the behavior of all of the homo-dipeptides from Cα -tetrasubstituted α-amino acids already investigated, which tend to adopt either the ß-turn or the fully extended conformation. Our density functional theory conformational energy calculations on the terminally blocked homo-peptides (n = 2-8) fully confirmed the crystal-state data, strongly supporting the view that this rigid Cα -tetrasubstituted α-amino acid residue is largely the most effective building block for γ-helix induction, although to a limited length (anti-cooperative effect). Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.

Light-driven topochemical polymerization under organogel conditions of a symmetrical dipeptide-diacetylene system.

A symmetrical dipeptide-based diacetylene system (DAs) was found to be able to self-assemble in dichloromethane and to form a compact fiber network which resulted in a stable organogel. As a consequence of the organogel formation, we explored the possibility to run a light-induced topochemical polymerization. This is a typical reaction of ordered diacetylene moieties taking advantage from their organized packing mode resulting from fiber formation. Evidence for the generation of peptide-based polydiacetylenes is provided by Raman, UV-Vis, and CD spectroscopies and a set of microscopic techniques. Finally, we succeeded in processing a polymeric composite by use of the electrospinning technique, starting from a mixture of a dipeptide-based diacetylene and polymethyl methacrylate. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.

Metal-Free on-Surface Photochemical Homocoupling of Terminal Alkynes.

On-surface synthesis involving the homocoupling of aryl-alkynes affords the buildup of bisacetylene derivatives directly at surfaces, which in turn may be further used as ingredients for the production of novel functional materials. Generally, homocoupling of terminal alkynes takes place by thermal activation of molecular precursors on metal surfaces. However, the interaction of alkynes with surface metal atoms often induces unwanted reaction pathways when thermal energy is provided to the system. In this contribution we report about light-induced metal-free homocoupling of terminal alkynes on highly oriented pyrolitic graphite (HOPG). The reaction occurred with high efficiency and selectivity within a self-assembled monolayer (SAM) of aryl-alkynes and led to the generation of large domains of ordered butadiynyl derivatives. Such a photochemical uncatalyzed pathway represents an original approach in the field of topological C-C coupling at the solid/liquid interface.

Helical Foldamers Incorporating Photoswitchable Residues for Light-Mediated Modulation of Conformational Preference.

An E unsaturated fumaramide linkage may be introduced into Aib peptide foldamer structures by standard coupling methods and photoisomerized to its Z (maleamide) isomer by irradiation with UV light. As a result of the photoisomerization, a new hydrogen-bonded contact becomes possible between the peptide domains located on either side of the unsaturated linkage. Using the fumaramide/maleamide linker to couple a chiral and an achiral fragment allows the change in hydrogen bond network to communicate a conformational preference, inducing a screw sense preference in the achiral domain of the maleamide-linked foldamers that is absent from the fumaramides. Evidence for the induced screw sense preference is provided by NMR and CD, and also by the turning on by light of the diastereoselectivity of a peptide chain extension reaction. The fumaramide/maleamide linker thus acts as a "conformational photodiode" that conducts stereochemical information as a result of irradiation by UV light.

A terminally protected dipeptide: from crystal structure and self-assembly, through co-assembly with carbon-based materials, to a ternary catalyst for reduction chemistry in water.

A terminally protected, hydrophobic dipeptide Boc-L-Cys(Me)-L-Leu-OMe (1) was synthesized and its 3D-structure was determined by single crystal X-ray diffraction analysis. This peptide is able to hierarchically self-assemble in a variety of superstructures, including hollow rods, ranging from the nano- to the macroscale, and organogels. In addition, 1 is able to drive fullerene (C60) or multiwalled carbon nanotubes (MWCNTs) in an organogel by co-assembling with them. A hybrid 1-C60­MWCNT organogel was prepared and converted (through a high vacuum-drying process) into a robust, high-volume, water insoluble, solid material where C60 is well dispersed over the entire superstructure. This ternary material was successfully tested as a catalyst for: (i) the reduction reaction of water-soluble azo compounds mediated by NaBH4 and UV-light with an overall performance remarkably better than that provided by C60 alone, and (ii) the NaBH4-mediated reduction of benzoic acid to benzyl alcohol. Our results suggest that the self-assembly properties of 1 might be related to the occurrence in its single crystal structure of a sixfold screw axis, a feature shared by most of the linear peptides known so far to give rise to nanotubes.

Boosting carbon quantum dots/fullerene electron transfer via surface group engineering.

The design of novel nanostructures with tailored opto-electronic properties is a crucial step for third-generation photovoltaics, and the development of cheap and environmentally compatible materials is still a challenge. Carbon quantum dots (CQDs) emerged as promising candidates but usually a low processability and poor electron-donor properties hampered their photovoltaic applications. We tackle these issues through the synthesis and photophysical characterization of N-doped CQDs functionalized with different thiophene-containing groups. Functionalization was aimed at enhancing the electron donating properties of the carbon dots and improving the solubility in nonpolar solvents. The increased solubility in organic solvents allowed us to investigate the photoinduced interactions of the functionalized carbon dots with the fullerene derivative PCBM in solution and in solid blends. The investigation was carried out by cyclic voltammetry, photoluminescence spectroscopy and electron paramagnetic resonance (EPR). The remarkable oxidation potential shift of the functionalized carbon dots with respect to the pristine materials and the HOMO-LUMO energies strongly suggest them as good electron donors towards PCBM. The electron transfer process between CQDs and PCBM resulted in efficient fluorescence quenching in solution and in total quenching in solid blends. By using EPR spectroscopy in the solid blends, we demonstrated the efficient electron transfer by observing the photoinduced formation of a PCBM radical anion in the presence of functionalized CQDs. Time-resolved EPR allowed us to identify differences in the charge transport efficiency for different CQD:PCBM blends. The enhanced processability of CQDs with PCBM and the promising charge-generation and separation properties pave the way to the development of "all-carbon" photovoltaic devices.

Peptide δ-Turn: Literature Survey and Recent Progress.

Among the various types of α-peptide folding motifs, δ-turn, which requires a central cis-amide disposition, has been one of the least extensively investigated. In particular, this main-chain reversal topology has been studied in-depth neither in linear/cyclic peptides nor in proteins. This Minireview article assembles and critically analyzes relevant data from a literature survey on the δ-turn conformation in those compounds. Unpublished results from recent conformational energy calculations and a preliminary solution-state analysis on a small model peptide, currently ongoing in our laboratories, are also briefly outlined.

1H-Azepine-2-oxo-5-amino-5-carboxylic Acid: A 310 Helix Inducer and an Effective Tool for Functionalized Gold Nanoparticles.

A new α,α-disubstituted constrained glutamine analogue has been designed to decorate gold nanoparticles and to induce a 310-helix when inserted in peptides. Using an efficient "one-pot" asymmetric Schmidt reaction between 4-disubstituted-cyclohexanone and hydroxyalkylazides, 1H-azepine-2-oxo-5-amino-5-carboxylic acid was prepared. The main (R) isomer was inserted at the N-terminus in a very short peptide sequence (i.e., PhCO-(R)-Oxo-Azn-L-Ala-Aib-L-AlaNHMe) and a stable 310-helix conformation was obtained, as verified by both NMR experiments and molecular dynamics (MD) simulations. Finally, the presence of the hydroxyl chain at the nitrogen atom of the ring allowed for the preparation of covered chiral gold nanoparticles.

Handedness preference and switching of peptide helices. Part II: Helices based on noncoded α-amino acids.

In this second part of our review article on the preferred screw sense and interconversion of peptide helices, we discuss the most significant computational and experimental data published on helices formed by the most extensively investigated categories of noncoded α-amino acids. They are as follows: (i) N-alkylated Gly residues (peptoids), (ii) C(α) -alkylated α-amino acids, (iii) C(α,ß) -sp(2) configurated α-amino acids, and (iv) combinations of residues of types (ii) and (iii). With confidence, the large body of interesting papers examined and classified in this editorial effort will stimulate the development of helical peptides in many diverse areas of biosciences and nanosciences.

Templating the self-assembly of pristine carbon nanostructures in water.

The low solubility of carbon nanostructures (CNs) in water and the need of ordered architectures at the nanoscale level are two major challenges for materials chemistry. Here we report that a novel amino acid based low-molecular-weight gelator (LMWG) can be used to effectively disperse pristine CNs in water and to drive their ordered self-assembly into supramolecular hydrogels. A non-covalent mechanochemical approach has been used, so the π-extended system of the CNs remains intact. Optical spectroscopy and electron microscopy confirmed the effective dispersion of the CNs in water. Electron microscopy of the hydrogels showed the formation of an ordered, LMWG-assisted, self-assembled architecture. Moreover, the very same strategy allows the solubilization and self-assembly in water of a variety of hydrophobic molecules.

Enhancement of the helical content and stability induced in a linear oligopeptide by an i, i+4 intramolecularly double stapled, overlapping, bicyclic [31, 22, 5]-(E)ene motif.

Two consecutive i, i+4 intramolecular, side chain-to-side chain, macrocyclizations of different type carried out on a preformed, partially helical peptide result in a largely predominant, double stapled, overlapping, bicyclic [31,22,5]-(E)ene motif. A detailed ECD and NMR conformational study revealed a significant enhancement of the original helical content and stability, accompanied by an increase of the α-helix amount over that of the 3(10)-helix.

The 2.05-helix in hetero-oligopeptides entirely composed of C(α,α)-disubstituted glycines with both side chains longer than methyls.

The existence of the very uncommon, but potentially quite interesting, multiple, consecutive fully-extended conformation (2.05-helix) has been already clearly demonstrated in homo-oligopeptides based on quaternary α-amino acids with both side chains longer than methyls, but not cyclized on the α-carbon atom. To extend the scope of this research, in this work we investigated the occurrence of this flat 3D-structure in hetero-oligopeptides, each composed of two or three different residues of that class. The synthesis of a terminally protected peptide series to the tetrapeptide level was carried out by solution methods. The resulting oligomers were chemically and conformationally characterized. The data obtained point to an overwhelming population of the fully-extended conformation in CDCl3. However, a solvent-driven switch to a predominant 310-helical structure was seen in CD3CN. A delicate, local balance between these two conformations is confirmed to occur in the crystalline state. Molecular dynamics simulations in CHCl3 on a hetero-tetrapeptide converged to the fully-extended conformation even starting from the 310-helical structure.

Conformation and EPR characterization of rigid, 310 -helical peptides with TOAC spin labels: Models for short distances.

For 3D-structure determination in biophysical systems EPR is rapidly gaining ground. Proteins labeled specifically with two nitroxide spin labels can be prepared, and several EPR methods are available for distance determination, which makes it possible to determine distance constraints. However, such methods require frozen solutions, potentially causing non-physiological states of the sample. Here, we target spin- spin interaction in liquid solution at room temperature using rigid model compounds. A series of 310 -helical peptides, based on α-aminoisobutyric acid (Aib), is synthesized with pairs of spin labels separated by three, four, and five amino acids. To avoid flexibility, the noncoded nitroxyl-containing α-amino acid TOAC that is rigidly connected with the peptide backbone, is used. The EPR spectra of the peptides show a decreasing amount of coupling between the two spin labels within this series. We suggest through-bond interaction as the dominating mechanism for exchange interaction (J) and find a stronger J-coupling than in the corresponding Ala-based TOAC-peptides investigated previously (Hanson, et al., J Am Chem Soc 1996, 118, 7618-7625). We speculate that stronger coupling in Aib- vs Ala- peptides is due to intrinsically stronger through-bond interaction in the Aib-based peptides.

Handedness preference and switching of peptide helices. Part I: Helices based on protein amino acids.

In this article, we review the relevant results obtained during almost 60 years of research on a specific aspect of stereochemistry, namely handedness preference and switches between right-handed and left-handed helical peptide structures generated by protein amino acids or appropriately designed, side-chain modified analogs. In particular, we present and discuss here experimental and theoretical data on three categories of those screw-sense issues: (i) right-handed/left-handed α-helix transitions underwent by peptides rich in Asp, specific Asp ß-esters, and Asn; (ii) comparison of the preferred conformations adopted by helical host-guest peptide series, each characterized by an amino acid residue (e.g. Ile or its diastereomer aIle) endowed with two chiral centers in its chemical structure; and (iii) right-handed (type I)/left-handed (type II) poly-(Pro)n helix transitions monitored for peptides rich in Pro itself or its analogs with a pyrrolidine ring substitution, particularly at the biologically important position 4. The unique modular and chiral properties of peptides, combined with their relatively easy synthesis, the chance to shape them into the desired conformation, and the enormous chemical diversity of their coded and non-coded α-amino acid building blocks, offer a huge opportunity to structural chemists for applications to bioscience and nanoscience problems.

Protocol for photo-controlling the assembly of cyclic peptide nanotubes in solution and inside microfluidic droplets.

In this protocol, we describe how to perform the photo-isomerization of cyclic peptides containing an unsaturated ß-amino acid. This process triggers the formation or disassembly of cyclic peptide nanotubes under appropriate light irradiation. Specifically, we start by describing the solid-phase synthesis of the cyclic peptide component. We also present a technique for performing isomerization studies in solution and how to extend it to microfluidic aqueous droplets. For complete details on the use and execution of this protocol, please refer to Vilela-Picos et al.1.