Ultrathin Ionic Diodes with Electrostatically Heterogeneous Hybrid Interfaces of Nanoporous SiO2 Nanofilms and Polymer Layer-by-Layer Multilayers.

Nanofluidic ionic diodes have attracted much attention due to their unique functions as unidirectional ion transportation ability and promising applications from molecular sensing, and energy harvesting to emerging neuromorphic devices. However, it remains a challenge to fabricate diode-like nanofluidic systems with ultrathin film thickness <100 nm. Herein the formation of ultrathin ionic diodes from hybrid nanoassemblies of nanoporous (NP) SiO2 nanofilms and polyelectrolyte layer-by-layer (LbL) multilayers is described. Ultrathin ionic diodes are prepared by integrating polyelectrolyte multilayers onto photo-oxidized NP SiO2 nanofilms obtained from silsesquioxane-containing block copolymer thin films as a template. The obtained ultrathin ionic diodes exhibit ion current rectification (ICR) properties with high ICR factor = ≈20 under low ionic strength and asymmetric pH conditions. It is concluded that this ICR behavior arises from effective ion accumulation and depletion at the interface of NP SiO2 nanofilms and LbL multilayers attributed to high ion selectivity by combining the experimental data and theoretical calculations using finite element methods. These results demonstrate that the hybrid nano assemblies of NP SiO2 nanofilms and polyelectrolyte LbL multilayers have potential applications for (bio)sensing materials and integrated ionic circuits for seamless connection of human-machine interfaces.

Assembly Structure Formation in Bulk and Ultrathin Films of Poly(substituted methylene) Having an Azobenzene Side Chain.

The density of the side chain introduced to a polymer main chain greatly influences the properties and functions of the polymer. This work first reports on the packing structure and properties at an interface of a poly(substituted methylene) where an azobenzene side chain is introduced at every carbon atom in the main chain (C1PAz). The structure and properties are compared with those of a conventional vinyl polymer [poly(methacrylate)] possessing an identical side-chain structure (C2PAz). The packing structure in the bulk state analyzed by X-ray measurements revealed that C1PAz adopts a highly ordered rectangular unit cell structure, whereas C2PAz shows a less ordered lamellar one. Langmuir film balance experiments indicated that both polymers with the trans-azobenzene give essentially the identical 2D side-chain occupying area on water, which agrees well with the smectic B (hexatic packing) model based on the X-ray data. Upon transfer onto a solid substrate, only C1PAz shows a conformational transformation to a spread bilayer-type layer, most probably due to conformational frustration stemming from the crowding of the side chains. This study proposes new insights into the effects of side-chain density on the self-assembly and photoreaction of azobenzene-containing polymers, which are expected to expand the possibilities of polymer design for various applications.

Influence of Humidity on Layer-by-Layer Growth and Structure in Coordination Networks.

Metal-organic frameworks (MOFs) are promising materials because of their high designability of pores and functionalities. Especially, MOF thin films and their properties have been investigated toward applications in nanodevices. Typically, MOF thin films are fabricated by using a bottom-up method such as layer-by-layer (LbL) growth in air. Because the water molecules can coordinate and be replaced with organic linkers during synthesis, humidity conditions will be expected to influence the LbL growth processes. In this study, we fabricated MOF thin films composed of Zn2+, tetrakis-(4-carboxyphenyl)-porphyrin (TCPP), and 4,4'-bipyridyl (bpy) at 10 and 40% relative humidity (RH) conditions. Then, we investigated the humidity effects on chemical compositions of TCPP and bpy, periodic structure, orientation, and surface morphology. At high RH, coordination replacement of water with the organic linkers becomes more competitive than that at low RH, resulting in a different TCPP/bpy composition ratio between the two RH conditions. Also, more frequent coordination replacements of water with the organic linkers at high RH led to the formation of phases other than that observed at low RH, loss of growth orientation, and rough surface. The findings clarified the importance of controlling the RH condition during LbL growth to obtain the desired coordination networks.

Induction of Highly Ordered Liquid Crystalline Phase of an Azobenzene Side Chain Polymer by Contact with 4'-Pentyl-4-cyanobiphenyl: An In Situ Study.

The orientation of liquid crystal (LC) molecules is significantly governed by solid interfaces and free surfaces, and a variety of functional materials have been developed using these properties. Although LC materials are already in industrial use, particularly for LC display panels, various studies have been conducted in recent years to better grasp the interface behavior of LC molecules. In this work, we succeeded in in situ observations of induction of higher ordered LC phases at the interface between a side-chain LC azobenzene polymer film with a thickness of ∼400 nm and a low-molecular-mass nematic LC, 4'-pentyl-4-cyanobiphenyl of 35 µm thickness, using small-angle X-ray scattering measurements and polarized optical microscopy. It is revealed that the two different mesogens cooperatively form hybrid higher ordered smectic LC phases probably through weak electron transfer immediately after interfacial contact. The induction process consists of three stages in terms of dynamic structure evolutions. Upon UV irradiation, the hybrid smectic LC structure diminished. This study provides new insights into the behavior of LC molecules near the alignment film on the solid substrate.

Effect of the Poly(ethylene glycol) Diacrylate (PEGDA) Molecular Weight on Ionic Conductivities in Solvent-Free Photo-Cross-Linked Solid Polymer Electrolytes.

To obtain safe, high-performance Li-ion batteries, the development of electrolytes with high impact resistance and high ionic conductivity is important. Ionic conductivity at room temperature has been improved by using poly(ethylene glycol) (PEG) diacrylate (PEGDA) to form three-dimensional (3D) networks and solvated ionic liquids. However, the effects of the molecular weight of PEGDA on ionic conductivities and the relationship between ionic conductivities and network structures of cross-linked polymer electrolytes have not been discussed in detail. In this study, the dependence of the ionic conductivity of photo-cross-linked PEG solid electrolytes on the molecular weight of the PEGDA was evaluated. X-ray scattering (XRS) gave detailed information about the dimensions of 3D networks formed by the photo-cross-linking of PEGDA, and the effects of the network structures on the ionic conductivities were discussed.

Order-order transitions in poly(N-octadecyl acrylamide-co-hydroxyethyl acrylamide) statistical copolymer films.

This study demonstrates that a simple statistical copolymer can form self-assembled lamellae, whose structures depend on both the comonomer composition and the annealing temperature. Statistical copolymers of octadecyl acrylamide and hydroxyethyl acrylamide [p(ODA/HEAm)] were prepared via free-radical copolymerization, and their thermal properties were studied by differential scanning calorimetry. Thin films of p(ODA/HEAm) were prepared via spin-coating, and their structures were analyzed using X-ray diffraction. It was found that copolymers with HEAm contents between 28 and 50% formed self-assembled lamellae upon annealing at a temperature ∼10 °C above the glass-transition temperature. The self-assembled form was found to possess a "side-chain-mixed" lamellar structure, in which the ODA and HEAm side chains are oriented perpendicular to the lamellar plane composed of the polymer main chain. Interestingly, a copolymer with a HEAm content between 36 and 50% transformed from the side-chain-mixed lamellar structure to generate a "side-chain-segregated" lamellar structure upon annealing at a significantly higher temperature (∼50 °C above Tg). In this structure, the ODA and HEAm side chains were found to be oriented in opposite directions but perpendicular to the lamellar plane. The packing of the side chains in the lamellar structures was studied using Fourier-transform infrared spectroscopy. It was concluded that the structures of the self-assembled lamellae are determined by the strain forces generated during self-assembly, and by the segregation forces existing between the comonomers.

Induced Smectic E Phase in a Binary Blend of Side-Chain Liquid Crystalline Polymers.

Two liquid crystalline polymers containing an azobenzene or cyanobiphenyl mesogenic side chain that adopt smectic A phases are mechanically mixed at 1:1 mesogen molar ratio at an isotropic phase temperature and then cooled. The resultant binary polymer mixture behaves like a single component as revealed by polarized microscopy observation and differential scanning calorimetry, indicating that the binary mixture forms a fully compatible polymer blend. Moreover, the simple polymer blend unexpectedly leads to a higher-ordered smectic E phase where a herringbone structure is formed with restricted mesogen axis rotation. These results suggest a specific intermolecular interaction between the two mesogens, thereby inducing unusual compatibilized polymer blends and the most ordered liquid crystal (LC) phase.

Supramolecular Helical Assemblies of Dirhodium(II) Paddlewheels with 1,4-Diazabicyclo[2.2.2]octane: A Remarkable Substituent Effect on the Helical Sense Preference and Amplification of the Helical Handedness Excess of Metallo-Supramolecular Helical Polymers.

We report unique coordination-driven supramolecular helical assemblies of a series of dirhodium(II) tetracarboxylate paddlewheels bearing chiral phenyl- or methyl-substituted amide-bound m-terphenyl residues with triethylene glycol monomethyl ether (TEG) or n-dodecyl tails through a 1:1 complexation with 1,4-diazabicyclo[2.2.2]octane (DABCO). The chiral dirhodium complexes with DABCO in CHCl3/n-hexane (1:1) form one-handed helical coordination polymers with a controlled propeller chirality at the m-terphenyl groups, which are stabilized by intermolecular hydrogen-bonding networks between the adjacent amide groups at the periphery mainly via a cooperative nucleation-elongation mechanism as supported by circular dichroism (CD), vibrational CD, and variable-temperature (VT) absorption and CD analyses. The VT visible-absorption titrations revealed the temperature-dependent changes in the degree of polymerization. The columnar supramolecular helical structures were elucidated by X-ray diffraction and atomic force microscopy. The helix sense of the homopolymer carrying the bulky phenyl and n-dodecyl substituents is opposite those of other chiral homopolymers despite having the same absolute configuration at the pendants. A remarkably strong "sergeants and soldiers" (S&S) effect was observed in most of the chiral/achiral copolymers, while the copolymers of the bulky chiral phenyl-substituted dirhodium complexes with n-dodecyl chains displayed an "abnormal" S&S effect accompanied by an inversion of the helix sense, which could be switched to a "normal" S&S effect by changing the solvent composition. A nonracemic dirhodium complex of 20% enantiomeric excess bearing the less bulky chiral methyl substituents with n-dodecyl chains assembled with DABCO to form an almost one-handed helix (the "majority rule" (MR) effect), whereas the three other nonracemic copolymers showed a weak MR effect.

Cross-correlated humidity-dependent structural evolution of Nafion thin films confined on a platinum substrate.

Nanometer thin films of Nafion ionomer interfaced with platinum form the functional electrodes in many electrochemical devices including fuel cells and electrolyzers. To impart facile proton conduction in a Nafion ionomer, sufficient hydration of the Nafion ionomer is necessary to create a percolating network of water-filled nanometer-sized hydrophilic domains that manifest as macroscopic swelling. This hydration behavior of the ionomer thin films is poorly understood especially for films confined on electrochemically relevant Pt substrates. In this work, we present the evolution of hydration-dependent microscopic hydrophilic domains and macroscopic expansion of a 55 nm thin Nafion film on a Pt substrate. The cross-correlation among the film macro-expansion from ellipsometry, the micro-expansion from GISAXS, and the water distribution from neutron reflectometry (NR) explains the observed non-affine behavior of the film which can be attributed to the randomly and spatially non-uniform distribution of water domains. A correlation between the macroscopic factor (ε/τ) for protonic conductivity, and the domain size and swelling is presented for the first time. In addition, interfacial water between Pt and the ionomer interface is estimated at 75% and 84% RH, and an increase in domain size with RH is discussed to explain the increased activity and oxygen diffusivity with RH.

Random Planar Orientation in Liquid-Crystalline Block Copolymers with Azobenzene Side Chains by Surface Segregation.

Rodlike liquid-crystalline (LC) mesogens preferentially adopt a homeotropic orientation by excluded volume effects at the free surface in side-chain LC (SCLC) polymer films. The homeotropic orientation is not advantageous for in-plane LC alignment processes. Surface segregation of polymers is the phenomenon in which one component with a low surface free energy covers the surface in a mixture of two or more polymers or a block copolymer film. In SCLC block copolymer films, the surface segregation structure induces a random planar orientation due to the formation of a microphase-separated interface parallel to the substrate via the covering of one of the segregated polymer blocks. This feature article focuses on the unique, random planar orientation induced by the surface segregation of SCLC block copolymer films with the photoresponsive azobenzene (Az) mesogenic group. A transition moment of the Az mesogens is parallel to the molecular long axis, and light irradiation is conducted perpendicular to the film surface in general photoreaction processes. Therefore, the homeotropic molecular orientation in the SCLC polymer systems with Az mesogenic units inhibits efficient photoreaction reorientations in thin films. The random planar orientations by the surface segregation of a coil block in SCLC block polymers provide efficient in-plane photoreorientation and photoswitching with LC hierarchical mesostructures, such as microphase-separated structures of SCLC block copolymers and laminated LC polymer films. On the other hand, surface-segregated SCLC blocks form a high-density polymer LC brush layer with a random planar orientation by self-assembly, which exhibits efficient angular selective photoreactions. These approaches using the surface segregation of SCLC block copolymers are expected to offer new concepts for the LC photoalignment process for LC polymer devices.

Formation of High-Density Brush of Liquid Crystalline Polymer Block Associated with Dewetting Process on Amorphous Polymer Film.

The understanding of polymer dewetting on solid surfaces is significant in both fundamental polymer physics and practical film technologies. When liquid crystalline (LC) polymers are dewetted, LC ordering is involved in the dewetting process. Here, we report on the characteristic dewetting processes of a diblock copolymer composed of a cyanobiphenyl side chain liquid crystalline polymer (SCLCP) block connected with polystyrene (PS) taking place on a PS base film. Thin films of the block copolymer were prepared by the water-floating method onto the PS film, and the dewetting process is observed in a softened state above the glass transition temperature of the PS. At the smectic A phase temperature of the SCLCP block, the dewetted surface layer generated a flat unique fingering pattern leading to a monolayered (two-dimensional) high-density LC polymer brush through the LC ordering. The important role of the anchoring PS block on the base PS film surface is suggested for the formation of highly stretched LC polymer brush. Above the isotropization temperature, in contrast, ordinary three-dimensional droplet morphologies with smooth round edges were observed. By photo-cross-linking the base PS film, the lateral diffusion rate was significantly reduced. This can be applied to an entropy-driven morphology patterning via dewetting. The polymer brush formation and its spatial controls are expected to provide new opportunities for the modification strategies of polymer surfaces.

Synthesis and Field-Effect Transistor Application of π-Extended Lactam-Fused Conjugated Oligomers obtained by Tandem Direct Arylation.

Five π-extended lactam-fused conjugated oligomers (5FO, 5FS, 4FPO, 4FPS, and R-4FPO) were synthesized by the tandem direct arylation. The intermolecular oxidative direct arylation was applied in the second step. These conjugated oligomers had fine-tuned FMO energies predictable by the theoretical calculation and excellent thermal stabilities. 4FPO and 4FPS bearing tetrafluoropyridine exhibited lower LUMO energy levels (-3.20 eV and -3.39 eV, respectively) compared with others. Based on the X-ray crystallography, 4FPO was found to have a herringbone crystal packing and a considerably large electron transfer integral value (137 meV). 4FPO-based bottom-gate, bottom-contact FET device demonstrated an electron mobility of 5.2×10-3  cm2 V-1 s-1 as a result of an edge-on alignment on the SiO2 substrate.

Photo-Responsive Soft Ionic Crystals: Ion-Pairing Assemblies of Azobenzene Carboxylates.

This report delineates the design and synthesis of negatively charged azobenzene derivatives that form photo-responsive ion-pairing assemblies. The azobenzene carboxylates possessing aliphatic chains were prepared as photo-responsive anions that promote the formation of ion-pairing dimension-controlled assemblies, including mesophases, when used in conjunction with a tetrabutylammonium (TBA) cation. The photo-responsive properties of the ion pairs and the precursory carboxylic acids in the bulk state were examined by polarized optical microscopy (POM) and X-ray diffraction (XRD), demonstrating that liquid crystal (LC)-liquid and crystal-liquid phase transitions occurred, depending on the number and lengths of the aliphatic chains of each assembly. An ion pair exhibited photo-induced crystal-crystal phase transitions upon switching between two irradiation wavelengths (365/436 nm).

Acid-Group-Content-Dependent Proton Conductivity Mechanisms at the Interlayer of Poly(N-dodecylacrylamide-co-acrylic acid) Copolymer Multilayer Nanosheet Films.

The effect of the content of acid groups on the proton conductivity at the interlayer of polymer-nanosheet assemblies was investigated. For that purpose, amphiphilic poly(N-dodecylacrylamide-co-acrylic acid) copolymers [p(DDA/AA)] with varying contents of AA were synthesized by free radical polymerization. Surface pressure (π)-area (A) isotherms of these copolymers indicated that stable polymer monolayers are formed at the air/water interface for AA mole fraction (n) ≤ 0.49. In all cases, a uniform dispersion of the AA groups in the polymer monolayer was observed. Subsequently, polymer monolayers were transferred onto solid substrates using the Langmuir-Blodgett (LB) technique. X-ray diffraction (XRD) analyses of the multilayer films showed strong Bragg diffraction peaks, suggesting a highly uniform lamellar structure for the multilayer films. The proton conductivity of the multilayer films parallel to the direction of the layer planes were measured by impedance spectroscopy, which revealed that the conductivity increased with increasing values of n. Activation energies for proton conduction of ∼0.3 and 0.42 eV were observed for n ≥ 0.32 and n = 0.07, respectively. Interestingly, the proton conductivity of a multilayer film with n = 0.19 did not follow the Arrhenius equation. These results were interpreted in terms of the average distance between the AA groups (lAA), and it was concluded that, for n ≥ 0.32, an advanced 2D hydrogen bonding network was formed, while for n = 0.07, lAA is too long to form such hydrogen bonding networks. The lAA for n = 0.19 is intermediate to these extremes, resulting in the formation of hydrogen bonding networks at low temperatures, and disruption of these networks at high temperatures due to thermally induced motion. These results indicate that a high proton conductivity with low activation energy can be achieved, even under weakly acidic conditions, by arranging the acid groups at an optimal distance.

Photoalignment of Vertically Oriented Microphase Separated Lamellae in LC-LC Diblock Copolymer Thin Film.

The microphase separation and photoalignment behavior of a diblock copolymer consisting of two kinds of side chain liquid crystalline (LC) polymers are investigated. Here, the mesogens of photoresponsive azobenzene and non-photoresponsive cyanobiphenyl are introduced in the side chains. The azobenzene and cyanobiphenyl mesogens orient homeotropically and planarly, respectively, in a thin film state. The combination of these contrasting orienting properties leads to a formation of vertically oriented lamella in the microphase separation structure. Irradiation with linearly polarized light onto this polymer film induces a highly oriented microphase separation structure having regularly elongated stripe morphology with 30 nm periodicity. The nearly defect-free morphology of this LC-LC diblock copolymer after the photoalignment is a distinct feature when compared with those of coil (amorphous)-LC diblock copolymer films possessing the same azobenzene side chain.

Free Surface Command Layer for Photoswitchable Out-of-Plane Alignment Control in Liquid Crystalline Polymer Films.

To date, reversible alignment controls of liquid crystalline materials have widely been achieved by photoreactive layers on solid substrates. In contrast, this work demonstrates the reversible out-of-plane photocontrols of liquid crystalline polymer films by using a photoresponsive skin layer existing at the free surface. A polymethacrylate containing a cyanobiphenyl side-chain mesogen adopts the planar orientation. Upon blending a small amount of azobenzene-containing side-chain polymer followed by successive annealing, segregation of the azobenzene polymer at the free surface occurs and induces a planar to homeotropic orientation transition of cyanobiphenyl mesogens underneath. By irradiation with UV light, the mesogen orientation turns into the planar orientation. The orientation reverts to the homeotropic state upon visible light irradiation or thermally, and such cyclic processes can be repeated many times. On the basis of this principle, erasable optical patterning is performed by irradiating UV light through a photomask.

Metal-Organic Coordination Network Thin Film by Surface-Induced Assembly.

The growth of metal-organic coordination network thin films on surfaces has been pursued extensively and intensively to manipulate the molecular arrangement. For this study, the oriented multilayer thin films based on porphyrinic nanoarchitecture were synthesized toward metal-organic coordination networks using surface-induced assembly (SIA). Nanoscale molecular thin films were prepared at room temperature using cobalt(II) ion and porphyrin building blocks as precursors. Stepwise growth with a highly uniform layer was characterized using UV-vis, AFM, IR, and XPS studies. The grazing incidence small-angle X-ray scattering and X-ray reflectivity results remarkably suggested a periodic structure in in-plane direction with constant and high mass density (ca. 1.5 g/cm(3)) throughout the multilayer formation. We propose that orientation of the porphyrin macrocycle plane with a hexagonal packed model by single anchoring mode was tilted approximately 60° with respect to the surface substrate. It is noteworthy that the well-organized structure of porphyrin-based macrocyclic framework on the amine-terminated surface substrate can be achieved efficiently using a simple SIA approach under mild synthetic conditions. The synthesized thin film provides a different structure from that obtained using bulk synthesis. This result suggests that the SIA technique can control not only the film thickness but also the structural arrangement on the surface. This report of our research provides insight into the ordered porphyrin-based metal-organic coordination network thin films, which opens up opportunities for exploration of unique thin film materials for diverse applications.

Fabrication and Characterization of Cross-Linked Organic Thin Films with Nonlinear Mass Densities.

The preparation of urea (bonded) cross-linked multilayer thin films by sequential deposition of bifunctional and tetrafunctional molecular building blocks is demonstrated. Multilayer growth as a function of deposition cycles was inspected using UV-vis absorption spectroscopy. From infrared results, three characteristic infrared bands of amide I, amide II, and asymmetric νa(N-C-N) stretching confirmed the formation of polyurea networks by alternate dipping into solutions of amine and isocyanate functionality monomers. The deconvoluted component of the C 1s and N 1s spectra obtained by X-ray photoelectron spectroscopy shows clear evidence of stable polyurea networks. The enhancement of structural periodicity with film growth was demonstrated by grazing-incidence small-angle X-ray scattering measurements. The thin film near the substrate surface seems to have an amorphous structure. However, molecular ordering improves in the surface normal direction of the substrate with a certain number of deposited layers. Constant mass density was not observed with deposition cycles. The mass density increased up to 16% within deposited layers from proximate layers to those extending away from the substrate surface. This difference in the packing density might derive from the different degrees of cross-linking among layers proximate to the substrate surface and extending away from the substrate surface.

Proton Conductivities of Lamellae-Forming Bioinspired Block Copolymer Thin Films Containing Silver Nanoparticles.

Size-controlled metal nanoparticles (NPs) were spontaneously formed when the amphiphilic diblock copolymers consisting of poly(vinyl catechol) and polystyrene (PVCa-b-PSt) were used as reductants and templates for NPs. In the present study, the proton conductivity of well-aligned lamellae structured PVCa-b-PSt films with Ag NPs was evaluated. We found that the proton conductivity of PVCa-b-PSt film was increased 10-fold by the addition of Ag NPs into the proton conduction channels filled with catechol moieties. In addition, the effect of humidity and the origin of proton conductivity enhancement was investigated.

Evaluations of Mesogen Orientation in Thin Films of Polyacrylate with Cyanobiphenyl Side Chain.

The orientation behavior of mesogens in a polyacrylate with cyanobiphenyl (CB) side chain in thin films was investigated in detail by UV-vis absorption spectroscopy and grazing incidence small-angle X-ray scattering (GI-SAXS) measurements using both high-energy X-rays of Cu Kα line (λ = 0.154 nm) and low-energy synchrotron X-rays (λ = 0.539 nm). By changing the film thickness ranging 7-200 nm, it is concluded that the planar orientation is predominant for thin films with thickness below 10-15 nm. This planar mesogen orientation near the substrate surface coexists with the homeotropically aligned CB mesogens in films thicker than 30 nm. For the thinnest 7 nm film, the planar orientation is unexpectedly lost, which is in consort with a disordering of smectic layer structure. Peculiar orienting characteristics of CB mesogen are suggested, which probably stem from the tendency to form an antiparallel arrangement of mesogens due to the strong dipole moment of the terminal cyano group.