Association between molar hypomineralization, genes involved in enamel development, and medication in early childhood: A preliminary study.

BACKGROUND: Molar hypomineralization (MH) is defined as a multifactorial condition, and thus, its presence may be defined by interactions between environmental and genetic factors. AIM: To evaluate the association between MH, genes involved in enamel development, and the use of medication during pregnancy in early childhood. DESIGN: One hundred and eighteen children, 54 with and 64 without MH, were studied. The data collected included demographics, socioeconomic data, and the medical history of mothers and children. Genomic DNA was collected from saliva. Genetic polymorphisms in ameloblastin (AMBN; rs4694075), enamelin (ENAM; rs3796704, rs7664896), and kallikrein (KLK4; rs2235091) were evaluated. These genes were analyzed by real-time polymerase chain reaction using TaqMan chemistry. The software PLINK was used to compare allele and genotype distributions of the groups and to assess the interaction between environmental variables and genotypes (p < .05). RESULTS: The variant allele KLK4 rs2235091 was associated with MH in some children (odds ratio [OR]: 3.75; 95% confidence interval [CI] = 1.65-7.81; p = .001). Taking medications in the first 4 years of life was also associated with MH (OR: 2.94; 95% CI = 1.02-6.04; p = .041) and specifically in association with polymorphisms in ENAM, AMBN, and KLK4 (p < .05). The use of medications during pregnancy was not associated with MH (OR: 1.37; 95% CI = 0.593-3.18; p = .458). CONCLUSION: The results of this study suggest that taking medication in the postnatal period appears to contribute to the etiology of MH in some evaluated children. There may be a possible genetic influence of polymorphisms in the KLK4 gene with this condition.

Microcomputed Tomography Mineral Density Profile as Reference Standard for Early Carious Lesion Activity Assessment.

Early caries diagnosis is crucial to treatment decisions in dentistry and requires identification of lesion activity: whether a carious lesion is active (progressively demineralizing) or arrested (progressively remineralizing). This study aimed to identify microtomographic (micro-CT) differences between active and arrested smooth surface enamel lesions, to quantify those micro-CT differences by creating thresholds for ex vivo caries activity assessment to serve as a future reference standard, and to validate those thresholds against the remaining sample. Extracted human permanent teeth (n = 59) were selected for sound surfaces and non-cavitated smooth surface carious lesions. Each surface was then examined for caries activity by calibrated individuals via visual-tactile examination using the International Caries Classification and Management System (ICCMS) activity criteria. Each tooth was scanned via micro-CT and the mineral density was plotted against lesion depth. The area under the curve (AUC) was calculated and represented the loss of density for the outermost 96 µm of enamel. AUC thresholds obtained from micro-CT were established to classify sound, remineralized, and demineralized surfaces against the gold standard examiner's lesion assessment of sound, inactive, and active lesions, respectively. The established AUC thresholds demonstrated moderate agreement with the assessment in identifying demineralized lesions (k = 0.45), with high sensitivity (0.73) and specificity (0.77). This study demonstrated quantifiable differences among demineralized lesions, remineralized lesions, and sound surfaces, which contributes to the establishment of micro-CT as a reference standard for caries activity that may be used to improve clinical and laboratorial dental caries evaluations.

Instrumentation time and effectiveness of hand and rotary files in a prototyped second mandibular primary molar: A micro-CT study.

BACKGROUND: Eccentric instruments have been proposed as more effective and less time-consuming for endodontic instrumentation. AIM: To compare biomechanical outcomes of different instrumentation systems and time undertaken for instrumentation in resin prototypes. DESIGN: Sixty standardized prototypes of mandibular second primary molars were instrumented according to the following systems: K-files, ProTaper Next (PTN), XP-endo Shaper (XPS), XP-endo Finisher (XPF), XP-Clean (XPC), and Sequence Baby File (SBF; n = 10/each). Irrigation was performed with saline with simultaneous aspiration, and time spent was recorded. The prototypes were micro-CT-scanned before and after the instrumentation, and image sets were reconstructed and registered. Non-instrumented areas, accumulated debris, removed root material volume, and canal transportation were quantified. Data were analyzed through ANOVA, the Kruskal-Wallis test, and the Wilcoxon signed-rank test (α = 5%). RESULTS: K-files and SBF resulted in more instrumentation time (p < .05). SBF, XPC and PTN removed less root dentine (p < .05), but PTN left more untouched areas (p < .05). Accumulated debris were lower for XPC and SBF (p < .05). Canal transportation was similar among the groups. CONCLUSION: Rotary systems reduced instrumentation time, whereas SBF and XPC resulted in more conservative instrumentation, with less debris accumulation and non-instrumented areas. A dedicated paediatric endodontic system (SBF) outperformed eccentric instruments in terms of effectiveness.

Management of compromised first permanent molars in a cohort of UK paediatric patients referred to hospital-based services.

BACKGROUND: There are diverse opinions among dentists about managing compromised first permanent molars (cFPMs) in children and a perceived lack of guidance to help them evaluate prognosis. AIM: To evaluate the current management of cFPM in children referred to a UK hospital centre and to report the severity of the affected teeth. DESIGN: A service evaluation was undertaken, based on case records of medically fit children (6-11 years) referred to for the management of cFPMs. The presence of hypomineralisation, post-eruptive breakdown and the proposed care plans were recorded. Radiographic signs of severity were scored using the ICDAS index (intra/inter-rater kappa 0.96/0.82). RESULTS: From 349 records screened over a 4-month period, 249 met the selection criteria. Almost 81% were planned to have extraction of at least one cFPM, whereas 19.3% were managed without extraction. More than half of the extraction cases (n = 105) had radiographic radiolucencies not exceeding the middle third of dentine in the worst-affected FPM. At the time of extraction, the mean age of the patients was 9.8 years (±0.9). GA was used in 196 (97.5%) cases, and 40.8% had not received previous treatment in any of their cFPMs. CONCLUSION: Potentially restorable cFPMs in children is, most of the time, in a cohort of UK patients referred for tier 3 services, being managed by timed extractions under general anasethesia.

Root canal obturation materials and filling techniques for primary teeth: In vitro evaluation in polymer-based prototyped incisors.

BACKGROUND: Achieving a void-free root canal filling is a challenge in current clinical pulpectomy practice. AIM: To compare filling effectiveness and internal voids of root filling materials and obturation techniques in resin-prototyped primary incisors by micro-CT. DESIGN: Fifty prototypes were instrumented and randomly divided (n = 10) according to the filling materials (Vitapex® , ZOE, Calcicur® , Feapex, and Calen® -ZO) and obturation technique: lentulo or pressure syringe (n = 5). The specimens were micro-CT scanned (pixel size = 7.83 µm) and reconstructed, and the total volume of filled canal (%FC) and internal voids (%IV) of the bulk filling material was calculated. Kruskal-Wallis and Mann-Whitney tests were used to detect differences and interactions among groups. RESULTS: Calen® -ZO, Vitapex® , and ZOE showed similar %FC. Calcicur® showed lower %FC compared with Calen® -ZO, Vitapex® , and ZOE (P < .05) but similar to Feapex. No statistically significant differences in %FC between lentulo or pressure syringe were disclosed. Regarding %IV, Vitapex® , and Calen® -ZO performed better with syringe, although Calcicur® was better with lentulo. The number of voids in the obturation bulk was similar among materials, but always lower (P < .05) in syringe filled specimens. CONCLUSION: Vitapex® , Calen® -ZO, and ZOE outperformed Calcicur® and Feapex in %FC and if the syringe technique is used, %IV of the obturation bulk and presence of defects was lower.

Is the caregivers' oral health related to dental caries in children or adolescents? A systematic review.

OBJECTIVES: This systematic review aimed to evaluate evidence on the relation between the caregivers' oral health condition and dental caries prevalence in their offspring. MATERIALS AND METHODS: Scientific literature was searched in PubMed, Scopus, LILACS, Web of Science, the Cochrane Library databases, and Grey Literature. Observational studies were included if mentioning oral health conditions in caregivers and dental caries in offsprings. The internal validity of the selected articles was judged by two evaluators according to a previously published guideline based on eight questions (1 point each). Studies included were divided into low methodological quality (1-3 points), moderate (4-6 points), or high (7-8 points) according to the quality assessment. The GRADE approach was used to assess the quality of evidence provided by the selected studies. RESULTS: Initially, 12.458 records were recovered, of which 54 full-text articles were evaluated. Hand search added 5 records, but after application of the exclusion criteria, only 16 articles which met the adopted eligibility criteria remained. Critical assessment scored one study as low, 10 moderate, and 5 with high validity. Most of the studies plotted correlations between the variables (12) while 4 studies compared DMFT (3) or ICDAS (1) scores between caries-active/caries-free children with caries experience in caregivers. Regarding the main study question, 15 studies (93.7%), containing 5704 caregivers and 5467 children/adolescents, found a significant relationship between mothers/caregivers and children's/adolescents' caries prevalence; one study found this relationship only for individuals showing active caries and one study did not disclose any relationship between caries prevalence in caregivers-children's/adolescents' pairs. The overall evidence was, however, qualified as low due to problems in the imprecision of the included studies. CONCLUSIONS: Caregivers' oral health may be considered as an important risk marker in children's and adolescent's caries prevalence. CLINICAL RELEVANCE: Assuming the contribution of caregivers' oral health conditions on dental caries in their offspring may help to establish control measures for such prevalent disease in the family environment.

Reciprocating instrumentation in a maxillary primary central incisor: A protocol tested in a 3D printed prototype.

BACKGROUND: Efficient endodontic instrumentation of primary teeth is a challenge for paediatric dentists. AIM: To evaluate biomechanical outcomes of endodontic instrumentation with a reciprocating system in a polymer-prototyped primary maxillary central incisor. DESIGN: The specimen was systematically instrumented and micro-CT scanned before and after each file. The amount of debris, percentage of non-instrumented areas, removed dentin volume, and lower dentin thickness at specific points along the root canal were analyzed. RESULTS: A 10% increase in removed dentin volume was observed when R40 was compared to R25 (14.5% vs 4.2%). When comparing R50 with R40, this increase was only 3.4% (17.9% vs 14.5%). In the root cervical third, there was substantial reduction in dentin thickness with R50 (48.8%), followed by R40 (39.5%) and R25 (18.6%). There was no difference between R25 and R40 in the removal of dentin at the apical third (15.8%), while R50 resulted in 39.8% reduction in dentin thickness. Percentage of non-instrumented areas were the same for all files. Accumulated debris with R40 and R50 was the same (0.19 mm³) while for R25 was 0.11 mm³. CONCLUSIONS: The Reciproc® system was effective for instrumentation of a prototyped primary maxillary central incisor. The most suitable file for apical preparation was R40.

Bioactive Restorative Materials Applied over Coronal Dentine-A Bibliometric and Critical Review.

The objective of the research was to examine the scientific literature concerning restorative materials with bioactive properties for the purpose of covering dentin. Searches were performed in various databases including MEDLINE, Scopus, Web of Science, Cochrane Library, Lilacs/BBO, and Embase. Inclusion criteria involved studies that utilized the terms "dentin" and "bioactive", along with "ion-releasing", "smart materials", "biomimetic materials" and "smart replacement for dentin". The information extracted included the title, authors, publication year, journal and the country of affiliation of the corresponding author. The studies were categorized based on their study design, type of material, substrate, analytical method, and bioactivity. A total of 7161 records were recovered and 159 were included for data extraction. Most of the publications were in vitro studies (n = 149), testing different types of materials in sound dentine (n = 115). Most studies were published in Dental Materials (n = 29), and an increase in publications could be observed after the year 2000. Most of the articles were from the USA (n = 34), followed by Brazil (n = 28). Interfacial analysis was the most investigated (n = 105), followed by bond strength (n = 86). Bioactivity potential was demonstrated for most tested materials (n = 148). This review presents insights into the current trends of bioactive materials development, clearly showing a severe lack of clinical studies.

In vitro and in situ caries-preventive effect of a new combined fluoride and calcium experimental nanocomposite solution.

To assess the in vitro and in situ effect of experimental combined fluoride and calcium nanocomposite solutions on dental caries prevention. Nanocompound mesoporous silica (MS) with calcium (Ca) and sodium fluoride (NaF) - (MSCaNaF); MS with NaF (MSNaF), NaF solution (positive control), and deionized water (negative control - CG) were studied. The specimens (n=130) were submitted in vitro to a multispecies biofilm in the presence of 2% sucrose. After 24 h and 48 h, the culture medium pH, the percent of surface mineral loss (%SML), and lesion depth (ΔZ) were analyzed. In the in situ study, 10 volunteers participated in four phases of 7-days each. The products were applied on the specimens (n=240) before 20% sucrose solution drips. The polysaccharides (SEPS and IEPS), %SML and roughness (Sa) were evaluated. There was an in vitro decrease in pH values in 24h and 48h, compared to baseline. The MSCaNaF and MSNaF groups obtained lower values of %SML and ΔZ (p < 0.05) than CG and NaF after 24h and were similar to NaF after 48h (p<0.05). In situ results showed similar SEPS and IEPS among all groups after 48h. An after 7-days, the nanocomposites had similar values (p>0.05), while NaF was similar to CG (p>0.05). After 48h, the MSCaNaF and MSNaF reduced the %SML (p<0.05). After 7-days, both experimental nanocomposites were similar to NaF (p>0.05). Regarding Sa, MSCaNaF was better than NaF for both periods (p<0.05). The nanocomposites controlled the in vitro and in situ enamel demineralization, mainly in the initial periods.

Shaping Ability of TRUShape and XP-endo Shaper in C-Shaped Canals Using 3D-Printed Replicas: A Micro-CT Study.

OBJECTIVE: This study compared the shaping ability of TRUShape and XP-endo Shaper systems on C-shaped root canals replicas using microcomputed tomography (micro-CT). MATERIAL AND METHODS: Thirty three-dimensional replicas based on a mandibular second molar classified as C1 type I C-shaped canal were randomly divided into two groups (n = 15): TRUShape (G.TRU) and XP-endo Shaper (G.XP) and instrumented with each system according to the manufacturer's instructions. Changes in volume and surface and the unprepared area of the root canal were measured by scanning on micro-CT before and after instrumentation. RESULTS: The unprepared areas were 39% in the G.TRU and 43% in the G.XP group with no significant difference between them (p > 0.05), but both the tested systems left a high percentage of unprepared root canal walls of C-shaped root canals. CONCLUSION: TRUShape and XP-endo Shaper showed a high rate of unprepared areas with similar results after C-shaped root canals replicas for root canal preparation.

Porosity and pore size distribution in high-viscosity and conventional glass ionomer cements: a micro-computed tomography study.

OBJECTIVES: This study aimed to compare and evaluate the porosity and pore size distribution of high-viscosity glass ionomer cements (HVGICs) and conventional glass ionomer cements (GICs) using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty cylindrical specimens (n = 10) were produced in standardized molds using HVGICs and conventional GICs (Ketac Molar Easymix, Vitro Molar, MaxxionR, and Riva Self-Cure). The specimens were prepared according to ISO 9917-1 standards, scanned in a high-energy micro-CT device, and reconstructed using specific parameters. After reconstruction, segmentation procedures, and image analysis, total porosity and pore size distribution were obtained for specimens in each group. After checking the normality of the data distribution, the Kruskal-Wallis test followed by the Student-Newman-Keuls test was used to detect differences in porosity among the experimental groups with a 5% significance level. RESULTS: Ketac Molar Easymix showed statistically significantly lower total porosity (0.15%) than MaxxionR (0.62%), Riva (0.42%), and Vitro Molar (0.57%). The pore size in all experimental cements was within the small-size range (< 0.01 mm3), but Vitro Molar showed statistically significantly more pores/defects with a larger size (> 0.01 mm3). CONCLUSIONS: Major differences in porosity and pore size were identified among the evaluated GICs. Among these, the Ketac Molar Easymix HVGIC showed the lowest porosity and void size.

Micro-CT evaluation of root canal preparation with rotary instrumentation on prototyped primary incisors.

This study aimed to evaluate the endodontic instrumentation outcomes with asymmetrical files compared to reciprocating and hand files (HFs) in 3D-printed prototypes of upper primary incisors using micro-computed tomography (micro-CT). For this purpose, 50 prototypes were randomly divided (n = 10) according to the instrumentation technique as follows: HFs, a reciprocating file (WaveOne® Gold [WOG]), and three asymmetrical movement files: XP-Endo® Shaper (XPS), XP-Endo® Finisher (XPF), and XP Clean (XPC). The specimens were scanned and, after registration of the baseline and instrumented volumes, changes in the root canal volume (RCV), debris accumulation, removed root material volume (RRMV), non-instrumented areas, and the presence of cracks/perforations were quantified. Data were analyzed by analysis of variance and Student's t-test, while the effect size was calculated for statistically significant outcomes. All groups showed an increase in RCV after instrumentation (p < 0.05), but this was higher with HFs (p < 0.05). Accumulated debris was higher for WOG and XPS (p < 0.05), but WOG exhibited more in the medium and apical third areas. HFs showed the highest RRMV (p < 0.05), especially at the apical third. The non-instrumented areas were lower for HFs and XPC than for the other systems (p < 0.05). Cracks were present in a few WOG (n = 2) and HF specimens (n = 3) and in this group, one of the cracked specimens and two others showed perforations. The asymmetric systems resulted in conservative dentin removal and fewer cracks/perforations as compared to HFs and a reciprocation file in prototyped primary upper incisors. XPC showed the best compromise between RRMV and non-instrumented areas with a low accumulation of debris.

Fabrication and characterization of remineralizing dental composites containing calcium type pre-reacted glass-ionomer (PRG-Ca) fillers.

OBJECTIVE: To fabricate and characterize dental composites with calcium type pre-reacted glass-ionomer (PRG-Ca) fillers. METHODS: PRG-Ca fillers were prepared by the reaction of calcium fluoroaluminosilicate glass with polyacrylic acid. Seven dental composites were produced from the same organic matrix (70/30wt% Bis-GMA/TEGDMA), with partial replacement of barium borosilicate (BaBSi) fillers (60wt%) by PRG-Ca fillers (wt%): E0 (0) - control, E1 (10), E2 (20), E3 (30), E4 (40), E5 (50) and E6 (60). Enamel remineralization was evaluated in caries-like enamel lesions induced by S. mutans biofilm using micro-CT. The following properties were characterized: degree of conversion (DC%), roughness (Ra), Knoop hardness (KHN), flexural strength (FS), flexural modulus (FM), water sorption (Wsp), water solubility (Wsl), and translucency (TP). Data were analyzed to one-way ANOVA and Tukey's HSD test (α=0.05). RESULTS: All composites with PRG-Ca induced enamel remineralization. E0 and E1 presented similar and highest DC% than E2=E3=E4=E5=E6. Ra and KHN were not influenced by PRG-Ca fillers (p<0.05). The higher the content of PRG-Ca, the lower FS, FM and TP (p<0.05). Wsp increased linearly with the content of PRG-Ca fillers (p<0.05). E6 presented the highest Wsl (p<0.05), while the Wsl of the other composites were not different from each other (p>0.05). SIGNIFICANCE: Incorporation of 10-40wt.% of PRG-Ca fillers endowed remineralizing potential to dental composites without jeopardizing the overall behavior of their physicochemical properties. Dental composites with PRG-Ca fillers seems to be a good alternative for reinforcing the enamel against caries development.

In vitro effect of experimental nanocomposites solutions on the prevention of dental caries around orthodontic brackets.

This study aimed to evaluate the in vitro effect of a single application of experimental nanocomposite solutions on the prevention of dental caries around orthodontic brackets. The specimens were exposed to mesoporous silica (MS) nanocomposites containing fluoride by association with titanium tetrafluoride (TiF4) or sodium fluoride (NaF). Nanocomposites also could contain calcium and groups were described as MSCaTiF4, MSTiF4, MSCaNaF, MSNaF, and controls (TiF4, and NaF). Specimens were subjected to the formation of a multispecies biofilm to generate a cariogenic challenge. After 24h, both pH and total soluble fluoride concentration of the culture medium were assessed. Mineral loss was evaluated by percentage of surface mineral loss (%SML), mineral volume variation (ΔZ) of inner enamel and polarized light microscopy (PL). Linear (Ra) and volumetric (Sa) surface roughness and scanning electronic microscopy (SEM) were used to assess enamel topography. Statistical analyses were conducted considering p<0.05. MSNaF had the highest value of culture medium pH after cariogenic challenge, similarly to MSTiF4. All nanocomposite solutions released less fluoride than their controls NaF and TiF4 (p<0.05). All nanocomposite solutions presented lower %SML compared to their respective control groups (p<0.05). Lower Ra, Sa and ΔZ were observed for experimental groups compared to TiF4 (p<0.05). The results were confirmed by PL and SEM analysis. The experimental nanocomposite solutions contributed for lower enamel demineralization around orthodontic brackets.

Minimally invasive judgement calls: managing compromised first permanent molars in children.

This paper aims to update the reader on how minimally invasive (MI) techniques may be used to improve the longevity of carious or defective/compromised first permanent molars (cFPMs) in young children. Clinical and radiographic diagnosis and the prognostic factors will be discussed in view of recent studies showing that these teeth can be kept in function and have an improved prognosis as the child gets older. Clinical protocols for their care, based on the latest evidence and techniques for MI restorations, together with longevity information of possible restorative options, are described. This paper also explores the rationale behind enforced extractions and related morbidity, in order to help oral healthcare practitioners to determine the optimal management of these key elements in the dentition for the benefit of the patients.

Contemporary restorative ion-releasing materials: current status, interfacial properties and operative approaches.

Minimally invasive (MI) concepts in restorative dentistry in the year 2020 request from the practitioner not only a scientifically supported rationale for carious tissue removal/excavation and defect-oriented, biological cavity preparation, but also a deep understanding of how to ensure a biomechanically stable and durable restoration in different clinical situations by applying different restorative options. Bio-interactive materials play an increasingly relevant role, as they not only replace diseased or lost tissue, but also optimise tissue mineral recovery (among other properties) when used in restorative and preventive dentistry. Indeed, this is of certain interest in MI restorative dentistry, especially in those cases where gap formation jeopardises the integrity of the margins along resin composite restorations, causing penetration of bacteria and eventually promoting the formation of secondary caries. Recently, the interest in whether ion-releasing materials may reduce such biofilm penetration into margin gaps and reduce such a risk for development and propagation of secondary caries is growing significantly among clinicians and scientists. The aim of this article was to explore mechanisms involved in the process that allow mineral deposition at the interface between such materials and dentine, and to describe how conventional 'bioactive' restorative materials currently available on the market may benefit treatments in MI dentistry.

Experimental composites containing quaternary ammonium methacrylates reduce demineralization at enamel-restoration margins after cariogenic challenge.

OBJECTIVE: This study evaluated the influence of experimental composites containing quaternary ammonium monomers (QAM) at different concentrations and alkyl chains on demineralization at enamel-composite margins after cariogenic challenge. METHODS: Standardized 4×4mm cavities were cut into 35 bovine enamel blocks, which were randomly divided into seven groups (n=5) and restored with the following experimental composites and commercial materials: (G12.5) - 5% dimethylaminododecyl methacrylate (DMADDM) with a 12-carbon alkyl chain (G12.10) - 10% DMADDM, (G16.5) - 5% dimethylaminohexadecyl methacrylate (DMAHDM) with a 16-carbon alkyl chain (G16.10) - 10% DMAHDM, (CG) - control group (without QAM), (GZ250) - commercial composite (Filtek Z250®), and (GIC) - glass ionomer cement (Maxxion R®). After restorative procedures, initial microhardness was measured and experimental composites were subjected to Streptococcus mutans biofilm formation for 48h. After cariogenic challenge, the samples were washed and microhardness was reassessed. A 3D non-contact profilometer was used to determine surface roughness and enamel demineralization was assessed by micro-CT. Microhardness results were analyzed by the Kruskal-Wallis and Mann-Whitney tests and micro-CT results were analyzed by Tukey's HSD test (95% confidence interval). RESULTS: None of the materials could prevent mineral loss at the enamel-restoration margins. The addition of 10% DMAHDM yielded the lowest, albeit statistically significant, mineral loss (p<0.05). 3D non-contact profilometry showed enamel surface roughness modification after biofilm exposure. The CG had the highest roughness values. Micro-CT analysis revealed mineral loss, except for GIC. SIGNIFICANCE: The addition of 10% QAM with a 16-carbon chain in experimental composites reduced mineral loss at the enamel-restoration margins after cariogenic challenge.

Caregivers' Sense of Coherence and Untreated Dental Caries in Children and Adolescents: A Cross-Sectional Study

ABSTRACT Objective: To associate caregivers' sense of coherence (SOC) and untreated caries with oral health status in children covered by a dental public health system. Material and Methods: A convenience sample of caregivers/children in Angra dos Reis, Brazil, was surveyed. Caregivers' SOC was evaluated using the 13-question version questionnaire. For both caregivers/children, sociodemographic information was acquired and caries experience was evaluated by DMFT/dmft and PUFA/pufa index. Statistical associations between children's untreated carious teeth and interest variables from the caregivers were evaluated by binary logistic regression assessed by generalized linear modeling. Results: A total of 233 pairs of caregivers-children were included. Children's untreated permanent and primary carious teeth represented 34.8% and 62.2% of the caries experience, respectively and at least one PUFA/pufa scored tooth was detected in 22.7% of them. Caregivers' DMFT was 13.5±7.0, while 33.6% scored on PUFA. A total of 62.1% of them presented untreated carious lesions. Results from the univariate model, correlating children's untreated caries and caregivers' attributes showed a statistical significance for SOC values (p<0.015), untreated decayed teeth (p<0.035), self-perception of oral health (p<0.022) and oral impact on daily performance (p<0.010). The multivariate logistic first model kept the statistical significance only for the caregiver's untreated decayed teeth. Conclusion: Caregivers' SOC and untreated carious teeth could be used as indicators of dental treatment needs in their offspring.

Accuracy of visual and image-based ICDAS criteria compared with a micro-CT gold standard for caries detection on occlusal surfaces.

The aim of this study was to check the in vitro accuracy of ICDAS criteria on digital images compared to visual examination for the diagnosis of occlusal caries against a micro-CT gold standard. ICDAS was scored in 40 extracted permanent molars by means of visual inspection and stereomicroscopic images. Visual examinations were performed in duplicate and at a one-week interval by three different calibrated examiners. The analysis of digital images by ICDAS criteria was also performed in duplicate, 1 month after visual examinations. The detection methods were compared by means of sensitivity, specificity, area under the curve, predictive positive and negative values, and accuracy for two different thresholds (1- sound vs. carious teeth; 2- tooth requiring operative vs. non-operative treatment). Sensitivity and accuracy values for threshold 1 in the visual ICDAS and image-based ICDAS methods were high for sensitivity (0.93 and 0.97) and for accuracy (0.83 and 0.85), but low for specificity (0.55 for both methods). Specificity values for threshold 2 were 0.77 and 0.82, while sensitivity was 0.33 and 0.28 for each method. Spearman's rank correlation coefficient was 0.53 and 0.43 (p<0.05) for visual and image-based ICDAS compared to the gold standard scores. Both visual and image-based ICDAS scores were similar to each other in terms of diagnostic accuracy when compared to the micro-CT gold standard. Low specificity for the presence of caries and sensitivity for the detection of caries requiring operative treatment were found.

A dual energy micro-CT methodology for visualization and quantification of biofilm formation and dentin demineralization.

OBJECTIVE: The aim of this study was to induce artificial caries in human sound dentin by means of a microcosm model using human saliva as source of bacteria and to apply a novel dual-energy micro-CT technique to quantify biofilm formation and evaluate its demineralization potential. DESIGN: Eight sound third molars had the occlusal enamel removed by cutting with a diamond disk and five cylindrical cavities (±2mm diameter; ±1.5mm depth) were prepared over the dentin surface in each specimen (n=40 cavities). After sterilization, each specimen received the bacterial salivary inoculum obtained from individuals without any systemic diseases presenting dentin caries lesions and were incubated in BHI added of with 5% sucrose for 96h to allow biofilm formation. After that, two consecutive micro-CT scans were acquired from each specimen (40kv and 70kv). Reconstruction of the images was performed using standardized parameters. After alignment, registration, filtering and image calculations, a final stack of images containing the biofilm volume was obtained from each prepared cavity. Dentin demineralization degree was quantified by comparison with sound dentin areas. All data were analyzed using Shapiro-Wilk test and Spearman correlation using α=5%. RESULTS: Dual-energy micro-CT technique disclosed biofilm formation in all cavities. Biofilm volume inside each cavity varied from 0.30 to 1.57mm3. A positive correlation between cavity volume and volume of formed biofilm was obtained (0.77, p<0.01). The mineral decrease obtained in dentin was high (±90%) for all cavities and all demineralized areas showed mineral density values lower than a defined threshold for dentin caries (1.2g/cm3). CONCLUSION: Dual-energy micro-CT technique was successful in the quantification of a microcosm human bacterial biofilm formation and to quantify its demineralization potential in vitro.