Image processing and neural network technique for size characterization of gravel particles.

Particle size is considered one of the significant characteristics used in geotechnical practices. Traditionally, sieve analysis is utilized for coarse-grained soil. However, this method could be time consuming and take much effort, especially for large scale infrastructure projects. This paper presents an efficient method for estimating gravel particle characterization utilizing image processing and artificial neural network technique (IPNN). The proposed algorithm is performed by utilizing particle boundary delineation and shape feature extraction to train a neural network model for estimating gravel size distribution curve. It is found that excellent agreement exists between the results obtained from conventional sieve analysis and neural analysis for gravel soil particles with maximum difference in passing percentages up to only 3.70%. The proposed technique shows satisfactory results for crushed stone samples with maximum difference in passing percentages about 10.90% mainly in large diameter particles. The presented technique (IPNN) could offer a promising alternative technique for material quality control process especially in large scale projects.

Numerical modeling of the funnel multiphysical flow of fresh self-compacting concrete considering proportionate heterogeneity of aggregates.

Filling ability is one of the prominent rheological properties of the self-compacting concrete (SCC), which has been studied in this research work deploying the functional behavior of the concrete through the studied funnel apparatus using the coupled ANSYS-SPH interface. Seven (7) model cases were studied and optimized. The aim of this numerical study is to propose a more sustainable mix of coarse and fine aggregates proportion that allows for most minimum flow time to enhance a more efficient filling of forms during concreting. The maximum size of the coarse aggregates considered is 20 mm and that of the fine aggregates is below 4 mm. The Bingham model properties for the multiphysics (SPH)-ANSYS models' simulation are; viscosity = 20 ≤ µ ≤ 100 and the yield stress = 50 [Formula: see text], standard flow time, t (s) ranges; 6 ≤ t ≤ 25 and the funnel volume is 12 L. The minimum boundary flow time, which represents the time it takes for the SCC to completely flow through a specified distance, typically measured in seconds was modeled for in the seven (7) model cases. The second case with 40% coarse mixed with 60% fine completely flowed out in 16 s, thus fulfilling the minimum flow time. This minimum flow time was considered alongside other relevant parameters and tests, such as slump flow, passing ability, segregation resistance, and rheological properties (stresses), to comprehensively assess the filling ability of SCC in this model. By considering these factors and the optimized mix (40%C + 60%F:16s), engineers and researchers can optimize the SCC mix design to achieve the desired flowability and filling performance for their specific construction applications. The multiphase optimized mix was further simulated using the coupled interface of the ANSYS-SPH platform operating with the CFX command at air temperature of 25 °C. The results show energy reduction jump at the optimized flow time. Ideally, the mix, 40%C + 60%F:16s has been proposed as the mix with the most efficient flow to achieve the filling ability for sustainable structural concrete construction.

Machine learning optimization of bio-sandcrete brick modelling using response surface methodology.

In this study, raw grinded groundnut shell (RGGNS) was used as a fine aggregate in the brick industry to reuse agricultural waste in building materials. In this study, an experimental approach was used to examine a new cement brick with raw groundnut shells integrated with compressive strength, water absorption and dry density optimization utilizing response surface methodology (RSM). The raw ground-nut shell content improved the fine aggregate performance of the 40%, 50%, and 60% samples. The 28-day high compressive strength with the raw ground-nut shell was 6.1 N/mm2 maximum, as needed by the technical standard. Samples made from 40%, 50%, and 60% raw groundnut shells yielded densities of 1.7, 2.2, and 1.9 kg/cm3 for groundnut shell (GNS) brick, respectively. A product's mechanical properties meet the IS code standard's minimum requirements. RSM was then utilized to develop a model for the addition of raw groundnut shell to concrete. R-square and Adeq precision values indicated that the results are highly significant, and equations for predicting compressive strength, water absorption, and dry density have been developed. In addition, optimization was performed on the RSM findings to determine the efficiency optimization of the model. Following the optimization results, experiments were conducted to determine the applicability of the optimized model.

Prediction of steel plate-based damper for improving the behavior of concentrically braced frames based on RSM and ML approaches for sustainable structures.

The stiffness (K) and slenderness factor (λ) of a steel plate-based damper has been studied on the basis of elastic-inelastic-plastic buckling (EIP) modes and flexural/shear/flexural-shear failure mechanisms (FSF-S), which has been designed for the improvement of the behavior of concentrically braced frames. Steel plate-based dampers offer significant benefits in terms of mode shapes and failure mechanisms, contributing to improved dynamic performance, enhanced structural resilience, and increased safety of civil engineering structures. Their effectiveness in mitigating dynamic loads makes them a valuable tool for engineers designing structures to withstand extreme environmental conditions and seismic events. This study was undertaken by using the learning abilities of the response surface methodology (RSM), artificial neural network (ANN) and the evolutionary polynomial regression (EPR). Steel plate dampers are special structural designs used to withstand the effect of special loading conditions especially seismic effects. Its design based on the prediction of its stiffness (K) and slenderness factor (λ) cannot be overlooked in the present-day artificial intelligence technology. In this research work, thirty-three entries based on the steel plate damper geometrical properties were recorded and deployed for the intelligent forecast of the fundamental properties (λ and K). Design ratios of the steel plate damper properties were considered and models behavior was recorded. From the outcome of the model, it can be observed that even though the EPR and ANN in that order outclassed the other techniques, the RSM produced model minimization and maximization features of the desirability levels, color factor scales and 3D surface observation, which shows the real model behaviors. Overall, the EPR with R2 of 0.999 and 1.000 for the λ and K, respectively showed to be the decisive model but the RSM has features that can be beneficial to the structural design of the studied steel plate damper for a more robust and sustainable construction. With these performances recorded in this exercise, the techniques have shown their potential to be applied in the prediction of steel damper stiffness with optimized characteristic features to withstand structural stresses.

Estimating the strength of soil stabilized with cement and lime at optimal compaction using ensemble-based multiple machine learning.

It has been imperative to study and stabilize cohesive soils for use in the construction of pavement subgrade and compacted landfill liners considering their unconfined compressive strength (UCS). As long as natural cohesive soil falls below 200 kN/m2 in strength, there is a structural necessity to improve its mechanical property to be suitable for the intended structural purposes. Subgrades and landfills are important environmental geotechnics structures needing the attention of engineering services due to their role in protecting the environment from associated hazards. In this research project, a comparative study and suitability assessment of the best analysis has been conducted on the behavior of the unconfined compressive strength (UCS) of cohesive soil reconstituted with cement and lime and mechanically stabilized at optimal compaction using multiple ensemble-based machine learning classification and symbolic regression techniques. The ensemble-based ML classification techniques are the gradient boosting (GB), CN2, naïve bayes (NB), support vector machine (SVM), stochastic gradient descent (SGD), k-nearest neighbor (K-NN), decision tree (Tree) and random forest (RF) and the artificial neural network (ANN) and response surface methodology (RSM) to estimate the (UCS, MPa) of cohesive soil stabilized with cement and lime. The considered inputs were cement (C), lime (Li), liquid limit (LL), plasticity index (PI), optimum moisture content (OMC), and maximum dry density (MDD). A total of 190 mix entries were collected from experimental exercises and partitioned into 74-26% train-test dataset. At the end of the model exercises, it was found that both GB and K-NN models showed the same excellent accuracy of 95%, while CN2, SVM, and Tree models shared the same level of accuracy of about 90%. RF and SGD models showed fair accuracy level of about 65-80% and finally (NB) badly producing an unacceptable low accuracy of 13%. The ANN and the RSM also showed closely matched accuracy to the SVM and the Tree. Both of correlation matrix and sensitivity analysis indicated that UCS is greatly affected by MDD, then the consistency limits and cement content, and lime content comes in the third place while the impact of (OMC) is almost neglected. This outcome can be applied in the field to obtain optimal compacted for a lime reconstituted soil considering the almost negligible impact of compactive moisture.

Modeling of the effect of gradation and compaction characteristics on the california bearing ratio of granular materials for subbase and landfill liner construction.

The California bearing ratio (CBR) of a granular materials are influence by the soil particle distribution indices such as D10, D30, D50, and D60 and also the compaction properties such as the maximum dry density (MDD) and the optimum moisture content (OMC). For this reason, the particle packing and compactibility of the soil play a big role in the design and construction of subbases and landfills. In this research paper, experimental data entries have been collected reflecting the CBR behavior of granular soil used to construct landfill and subbase. The database was utilized in the ratio of 78-22% to predict the CBR behavior considering the artificial neural network (ANN), the evolutionary polynomial regression (EPR), the genetic programming (GP), Extreme Gradient Boosting (XGBoost), Random Forest (RF) and the response surface methodology (RSM) intelligent learning and symbolic abilities. The relative importance values for each input parameter were carried out, which indicated that the (CBR) value depends mainly on the average particle size (D30, 50 & 60). They showed a combined influence index of 66% of the considered parameters in the model exercise. This further shows the importance and structural influence of the particles within the D50 and D60 range in a granular material consistency in the design and construction purposes. Performance indices were also used to study the ability of the models. The ANN model showed the best performance with accuracy of 88%, then GP, EPR and RF with almost the same accuracies of 85% and lastly the XGBoost with accuracy of 81%. Also, the RSM produced an R2 of 0.9464 with a p-value of less than 0.0001. These values show that the ANN produced the decisive model with the superior performance indices in the forecast of CBR of granular material used as subbase and waste compacted earth liner material. The results further show that optimal performance of the CBR depended on D50 and D60 for the design of subgrade, subbase, and liner purposes and also during the performance monitoring phase of the constructed flexible pavement foundations and compacted earth liners.

Comprehensive study on zeolitepolyester composite coated sheet for eco-friendly solar panels for enhanced panel performance and reduced panel temperature.

Solar energy is the most promising source for generating residential, commercial, and industrial electricity. However, solar panels should be eco-friendly to increase sustainability during manufacturing and recycling. This study investigates the potential of using natural fibre composites as eco-friendly alternatives to conventional polyethylene terephthalate (PET) back sheets in solar panels. Furthermore, it examines the performance of sisal fibres coated with zeolite-polyester resin. The chemical composition, structural integrity, and crystalline properties of the composites were evaluated through extensive microstructural analysis. The results from the experimental analysis revealed significant improvements in voltage (8%) and current (6%) for the coated sisal fibre panels compared to conventional panels. Power output increased by 12%, and overall efficiency improved from 9.75 to 10.8%. Solar panels with sisal fibre sheets exhibit adequate tensile strength and impact resistance and reduce operating temperature by 2-3 °C, ensuring stable operation and minimizing heat loss. Statistical analysis confirmed the reliability and significance of these results. The life cycle analysis demonstrated a 60% reduction in CO2 emissions and a 50% decrease in energy consumption during the production, utilization and disposal of sisal fibre sheets. These findings underscore the viability of natural fibre composites in enhancing the performance and sustainability of solar panels.

Numerical model of debris flow susceptibility using slope stability failure machine learning prediction with metaheuristic techniques trained with different algorithms.

In this work, intelligent numerical models for the prediction of debris flow susceptibility using slope stability failure factor of safety (FOS) machine learning predictions have been developed. These machine learning techniques were trained using novel metaheuristic methods. The application of these training mechanisms was necessitated by the need to enhance the robustness and performance of the three main machine learning methods. It was necessary to develop intelligent models for the prediction of the FOS of debris flow down a slope with measured geometry due to the sophisticated equipment required for regular field studies on slopes prone to debris flow and the associated high project budgets and contingencies. With the development of smart models, the design and monitoring of the behavior of the slopes can be achieved at a reduced cost and time. Furthermore, multiple performance evaluation indices were utilized to ensure the model's accuracy was maintained. The adaptive neuro-fuzzy inference system, combined with the particle swarm optimization algorithm, outperformed other techniques. It achieved an FOS of debris flow down a slope performance of over 85%, consistently surpassing other methods.

Estimating the strength of bi-axially loaded track and channel cold formed composite column using different AI-based symbolic regression techniques.

Steel construction is increasingly using thin-walled profiles to achieve lighter, more cost-effective structures. However, analyzing the behavior of these elements becomes very complex due to the combined effects of local buckling in the thin walls and overall global buckling of the entire column. These factors make traditional analytical methods difficult to apply. Hence, in this research work, the strength of bi-axially loaded track and channel cold formed composite column has been estimated by applying three AI-based symbolic regression techniques namely (GP), (EPR) and (GMDH-NN). These techniques were selected because their output models are closed form equations that could be manually used. The methodology began with collecting a 90 records database from previous researches and conducting statistical, correlation and sensitivity analysis, and then the database was used to train and validate the three models. All the models used local and global slenderness ratios (λ, λc, λt) and relative eccentricities (ex/D, ey/B) as inputs and (F/Fy) as output. The performances of the developed models were compared with the predicted capacities from two design codes (AISI and EC3). The results showed that both design codes have prediction error of 33% while the three developed models showed better performance with error percent of 6%, and the (EPR) model is the simplest one. Also, both correlation and sensitivity analysis showed that the global slenderness ratio (λ) has the main influence on the strength, then the relative eccentricities (ex/D, ey/B) and finally the local slenderness ratios (λc, λt).

Correction: Forecasting the rheological state properties of self-compacting concrete mixes using the response surface methodology technique for sustainable structural concreting.

[This corrects the article DOI: 10.1371/journal.pone.0302202.].

Forecasting the rheological state properties of self-compacting concrete mixes using the response surface methodology technique for sustainable structural concreting.

It is structurally pertinent to understudy the important roles the self-compacting concrete (SCC) yield stress and plastic viscosity play in maintaining the rheological state of the concrete to flow. It is also important to understand that different concrete mixes with varying proportions of fine to coarse aggregate ratio and their nominal sizes produce different and corresponding flow- and fill-abilities, which are functions of the yield stress/plastic viscosity state conditions of the studied concrete. These factors have necessitated the development of regression models, which propose optimal rheological state behavior of SCC to ensure a more sustainable concreting. In this research paper on forecasting the rheological state properties of self-compacting concrete (SCC) mixes by using the response surface methodology (RSM) technique, the influence of nominal sizes of the coarse aggregate has been studied in the concrete mixes, which produced experimental mix entries. A total of eighty-four (84) concrete mixes were collected, sorted and split into training and validation sets to model the plastic viscosity and the yield stress of the SCC. In the field applications, the influence of the sampling sizes on the rheological properties of the concrete cannot be overstretched due to the importance of flow consistency in SCC in order to achieve effective workability. The RSM is a symbolic regression analysis which has proven to exercise the capacity to propose highly performable engineering relationships. At the end of the model exercise, it was found that the RSM proposed a closed-form parametric relationship between the outputs (plastic viscosity and yield stress) and the studied independent variables (the concrete components). This expression can be applied in the design and production of SCC with performance accuracies of above 95% and 90%, respectively. Also, the RSM produced graphical prediction of the plastic viscosity and yield stress at the optimized state conditions with respect to the measured variables, which could be useful in monitoring the performance of the concrete in practice and its overtime assessment. Generally, the production of SCC for field applications are justified by the components in this study and experimental entries beyond which the parametric relations and their accuracies are to be reverified.

Modeling the influence of bacteria concentration on the mechanical properties of self-healing concrete (SHC) for sustainable bio-concrete structures.

In this research paper, the intelligent learning abilities of the gray wolf optimization (GWO), multi-verse optimization (MVO), moth fly optimization, particle swarm optimization (PSO), and whale optimization algorithm (WOA) metaheuristic techniques and the response surface methodology (RSM) has been studied in the prediction of the mechanical properties of self-healing concrete. Bio-concrete technology stimulated by the concentration of bacteria has been utilized as a sustainable structural concrete for the future of the built environment. This is due to the recovery tendency of the concrete structures after noticeable structural failures. However, it requires a somewhat expensive exercise and technology to create the medium for the growth of the bacteria needed for this self-healing ability. The method of data gathering, analysis and intelligent prediction has been adopted to propose parametric relationships between the bacteria usage and the concrete performance in terms of strength and durability. This makes is cheaper to design self-healing concrete structures based on the optimized mathematical relationships and models proposed from this exercise. The performance of the models was tested by using the coefficient of determination (R2), root mean squared errors, mean absolute errors, mean squared errors, variance accounted for and the coefficient of error. At the end of the prediction protocol and model performance evaluation, it was found that the classified metaheuristic techniques outclassed the RSM due their ability to mimic human and animal genetics of mutation. Furthermore, it can be finally remarked that the GWO outclassed the other methods in predicting the concrete slump (Sl) with R2 of 0.998 and 0.989 for the train and test, respectively, the PSO outclassed the rest in predicting the flexural strength with R2 of 0.989 and 0.937 for train and test, respectively and the MVO outclassed the others in predicting the compressive strength with R2 of 0.998 and 0.958 for train and test, respectively.

A critical review of rheological models in self-compacting concrete for sustainable structures.

Studying the rheological behavior of concrete, especially self-compacting concrete is vital in the design and structural integrity of concrete structures for design, construction, and structural material sustainability. Both analytical and numerical techniques have been applied in the previous research works to study precisely the behavior of the yield stress and plastic viscosity of the fresh self-compacting concrete with the associated flow properties and these results have not been systematically presented in a critical review, which will allow researchers, designers and filed operators the opportunity to be technically guided in their design and model techniques selection in order to achieve a more sustainable concrete model for sustainable concrete buildings. Also, the reported analytical and numerical techniques have played down on the effect of the shear strain rate behavior and as to reveal the viscosity changes of the Bingham material with respect to the strain rate. In this review paper, a critical study has been conducted to present the available methods from various research contributions and exposed the inability of these contributions to revealing the effect of the shear strain rate on the rheological behavior of the self-compacting concrete. With this, decisions related to the rheology and flow of the self-compacting concrete would have been made with apt and more exact considerations.

Soft computing techniques for predicting the properties of raw rice husk concrete bricks using regression-based machine learning approaches.

In this study, the replacement of raw rice husk, fly ash, and hydrated lime for fine aggregate and cement was evaluated in making raw rice husk-concrete brick. This study optimizes compressive strength, water absorption, and dry density of concrete brick containing recycled aggregates via Response Surface Methodology. The optimized model's accuracy is validated through Artificial Neural Network and Multiple Linear Regression. The Artificial Neural Network model captured the 100 data's variability from RSM optimization as indicated by the high R threshold- (R > 0.9997), (R > 0.99993), (R > 0.99997). Multiple Linear Regression model captured the data's variability the decent R2 threshold confirming- (R2 > 0.9855), (R2 > 0.9768), (R2 > 0.9155). The raw rice husk-concrete brick 28-day compressive strength, water absorption, and density prediction were more accurate when using Response Surface Methodology and Artificial Neural Network compared to Multiple Linear Regression. Lower MAE and RMSE, coupled with higher R2 values, unequivocally indicate the model's superior performance. Additionally, employing sensitivity analysis, the influence of the six input parameters on outcomes was assessed. Machine learning aids efficient prediction of concrete's mechanical properties, conserving time, labor, and resources in civil engineering.

Recycling and sustainable applications of waste printed circuit board in concrete application and validation using response surface methodology.

The present investigation aims to examine the mechanical and durability properties of concrete that has been reinforced with a waste printed circuit board (WPCB) towards a low-carbon built environment. It assessed the fresh and hardened characteristics of the low-carbon concrete reinforced with WPCB fibres, after a curing period of 7 and 28 days. The evaluation was done by quantifying slump, compressive strength, split tensile strength, flexural strength, sorptivity, rapid, and acid tests. It further analysed eleven discrete concrete mixes with WPCB fibres at a weight percentage ranging from 1 to 5% in the cement mixture. The results indicate that incorporating WPCB fibre into concrete improves its mechanical strength. The results revealed that incorporating 5% WPCB fibre yielded the most favourable outcomes. The properties of WPCB fibre-reinforced concrete have been theoretically validated through Response Surface Methodology (RSM), which employs various statistical and mathematical tools to analyse the experimental data. The results derived from RSM were compared with the experimental results. It was found that the RSM model demonstrated a high level of accuracy (R2 ≥ 0.98) in validating the mechanical properties of WPCB fibre concrete. The statistical model exhibited no indication of prediction bias and demonstrated a statistically significant outcome, with a p-value below 0.5.

Extensive overview of soil constitutive relations and applications for geotechnical engineering problems.

A state-of-the-art review has been conducted in this work on soil constitutive modeling, which has emphasized on: soil type, ground-water conditions, loading conditions, structural behavior, constitutive relation discipline, and dimensions. By extension also, the soil constitutive applications were reviewed on the bases of: single discipline dealing with soil mechanical properties constitutive modeling which included slope stability problems, bearing capacity, settlement of foundations, earth pressure problems, soil dynamics, soil structure interaction, thermal and hydrological conditions; bi-discipline (coupled problems) which solve problems related to thermomechanical (freeze/thaw conditions), smoothed particle hydrodynamics (SPH) and hydromechanical (consolidation, collapse and liquefaction) conditions in soils and rocks and multi-discipline constitutive models which solve complex problems related to thermo-hydromechanical (THM) conditions in soils and rocks. This work has shown that smoothed particle hydrodynamics (SPH) and hydromechanical (HM) models, which belong to bi-discipline or coupled conditions are better suited for geotechnical applications, generally, while thermo-hydromechanical (THM) models, which belong to multi-discipline are better suited to solving freeze/thaw and thermal piles problems and these are proven with high performance and flexibility.

Behavior of strip footing rested on undrained clay using consistency limits-based constitutive law.

The behavior of undrained clay was extensively studied by many earlier researchers. A lot of constitutive models were developed to describe the behavior of undrained clay based on its mechanical properties. The aim of this research is to present an innovative constitutive model for undrained clay based on its consistency limits and water content. The main concept of this model is to estimate the mechanical properties of clay using earlier correlations with consistency limits, then implement the estimated mechanical properties in a hyperbolic model and calibrate the hyperbolic parameters to match the failure criteria of the undrained clay. To verify the validity of the developed constitutive model, it was applied on a standard problem which is a strip footing rested on undrained clay layer, the results confirmed the ability of the model to simulate the nonlinear behavior of undrained clay up to ultimate condition. The main advantage of this constitutive model is the ability to capture the reduction of mechanical properties of clay with the increase in its water content, which makes it ideal to study the impact of seepage on shallow foundation.