Basin scale sources of siltation in a contaminated hydropower reservoir.

Siltation and the loss of hydropower reservoir capacity is a global challenge with a predicted 26 % loss of storage at the global scale by 2050. Like in many other Latin American contexts, soil erosion constitutes one of the most significant water pollution problems in Chile with serious siltation consequences downstream. Identifying the sources and drivers affecting hydropower siltation and water pollution is a critical need to inform adaptation and mitigation strategies especially in the context of changing climate regimes e.g. rainfall patterns. We investigated, at basin scale, the main sources of sediments delivered to one of the largest hydropower reservoirs in South America using a spatio-temporal geochemical fingerprinting approach. Mining activities contributed equivalent to 9 % of total recent sediment deposited in the hydropower lake with notable concentrations of sediment-associated pollutants e.g. Cu and Mo in bed sediment between the mine tributary and the reservoir sediment column. Agricultural sources represented ca. 60 % of sediment input wherein livestock production and agriculture promoted the input of phosphorus to the lake. Evaluation of the lake sediment column against the tributary network showed that the tributary associated with both dominant anthropogenic activities (mining and agriculture) contributed substantially more sediment, but sources varied through time: mining activities have reduced in proportional contribution since dam construction and proportional inputs from agriculture have increased in recent years, mainly promoted by recent conversion of steep lands from native vegetation to agriculture. Siltation of major hydropower basins presents a global challenge exemplified by the Rapel basin. The specific challenges faced here highlight the urgent need for co-design of evidence-led, context-specific solutions that address the interplay of drivers both within and without the basin and its communities, enhancing the social acceptability of sediment management strategies to support the sustainability of clean, hydropower energy production.

First use of a compound-specific stable isotope (CSSI) technique to trace sediment transport in upland forest catchments of Chile.

Land degradation is a problem affecting the sustainability of commercial forest plantations. The identification of critical areas prone to erosion can assist this activity to better target soil conservation efforts. Here we present the first use of the carbon-13 signatures of fatty acids (C14 to C24) in soil samples for spatial and temporal tracing of sediment transport in river bodies of upland commercial forest catchments in Chile. This compound-specific stable isotope (CSSI) technique was tested as a fingerprinting approach to determine the degree of soil erosion in pre-harvested forest catchments with surface areas ranging from 12 to 40ha. For soil apportionment a mixing model based on a Bayesian inference framework was used (CSSIAR v.2.0). Approximately four potential sediment sources were used for the calculations of all of the selected catchments. Unpaved forestry roads were shown to be the main source of sediment deposited at the outlet of the catchments (30-75%). Furthermore, sampling along the stream channel demonstrated that sediments were mainly comprised of sediment coming from the unpaved roads in the upper part of the catchments (74-98%). From this it was possible to identify the location and type of primary land use contributing to the sediment delivered at the outlet of the catchments. The derived information will allow management to focus efforts to control or mitigate soil erosion by improving the runoff features of the forest roads. The use of this CSSI technique has a high potential to help forestry managers and decision makers to evaluate and mitigate sources of soil erosion in upland forest catchments. It is important to highlight that this technique can also be a good complement to other soil erosion assessment and geological fingerprinting techniques, especially when attempting to quantify (sediment loads) and differentiate which type of land use most contributes to sediment accumulation.

Source identification, apportionment and toxicity of indoor and outdoor PM2.5 airborne particulates in a region characterised by wood burning.

The occurrence of airborne particulate matter has been flagged as "of concern" in several megacities, especially in Asia. Selected Chilean regions have similar problems as wood burning is the major source of heating in homes. This concern has led to mitigation measures restricting the burning of wood at periods when the particulate matter smaller than 2.5 µm (PM2.5) concentrations are predicted to be high. This work investigates the linkage between indoor and outdoor particle concentrations, determines their source through the polyaromatic hydrocarbon (PAH) signature and investigates the efficacy of the current management practice of burning restrictions. The PM2.5 fraction was collected at 12 different properties with coincident indoor and outdoor sampling using a low-volume active sampler for 24 hours. Indoor concentrations of PM2.5 ranged from 6 to 194 µg m(-3) with a mean of 72 µg m(-3) and corresponding outdoor concentrations ranged from 5 to 367 µg m(-3) with a mean of 85 µg m(-3) over the winter periods of 2014 and 2015; the Chilean national permitted maximum in outdoor air is 50 µg m(-3) in 24 hours. Higher concentrations were measured when the outdoor air temperature was lower. The PAHs were analysed on the PM2.5 fraction; the indoor concentrations ranged from 2 to 291 ng m(-3) with a mean of 51 ng m(-3) compared to an outdoor concentration between 3 and 365 ng m(-3) with a mean of 71 ng m(-3). Multivariate statistical analysis of the PAH profiles using principal components analysis (PCA) and polytopic vector analysis (PVA) identified wood burning, static and mobile diesel emissions and kerosene combustion as the major contributors to the particulate matter. When converted to toxicity equivalents (BaP-TEQ), the highest toxicity arising from PAHs in the indoor air was associated with a property that used a "leaky" combined wood stove and heater and also used a wood-fired brazier for local heating. In outdoor air, there was a relationship between the housing density and the BaP-TEQ, such that denser housing had higher BaP-TEQ values. The restrictions in wood burning on selected days may have had a measureable effect on the PM2.5 concentrations in that region but the effects were small and only present for the day of the restriction.