Fluorine-Containing Poly(Fluorene)-Based Anion Exchange Membrane with High Hydroxide Conductivity and Physicochemical Stability for Water Electrolysis.

Improving the hydroxide conductivity and dimensional stability of anion exchange membranes (AEMs) while retaining their high alkaline stability is necessary to realize the commercialization of AEM water electrolysis (AEMWE). A strategy for improving the hydroxide conductivity and dimensional stability of AEMs by inserting fluorine atoms in the core structure of the backbone is reported, which not only reduces the glass transition temperature of the polymer due to steric strain, but also induces distinct phase separation by inducing polarity discrimination to facilitate the formation of ion transport channels. The resulting PFPFTP-QA AEM with fluorine into the core structure shows high hydroxide conductivity (>159 mS cm-1 at 80 °C), favorable dimensional stability (>25% at 80 °C), and excellent alkaline stability for 1000 h in 2 m KOH solution at 80 °C. Moreover, the PFPFTP-QA is used to construct an AEMWE cell with a platinum group metal (PGM)-free NiFe anode, which exhibits the current density of 6.86 A cm-2 at 1.9 V at 80 °C, the highest performance in Pt/C cathode and PGM-free anode reports so far and operates stably for over 100 h at a constant current of 0.5 A cm-2 .

Energy-Efficient and Self-Powered Green Ammonia Synthesis by Electrochemical Nitrate Reduction Combined with Hydrazine Oxidation.

To achieve the global goal of carbon neutrality, recently, emphasis has been placed on developing green ammonia production method to replace the Haber-Bosch process. Nitrate reduction reaction (NO3 RR) has received considerable attention, especially for electrochemically producing ammonia from nitrate and simultaneously purifying wastewater. This study first demonstrates that the combination of NO3 RR with hydrazine oxidation reaction (HzOR) is an energy efficient green ammonia production method, which overcomes the sluggish water oxidation limitation. Tungsten phosphide (WP) nanowires (NWs) are prepared as cathode NO3 RR electrocatalysts, which exhibit a high Faradaic efficiency in both neutral (≈93%) and alkaline (≈85%) media. Furthermore, they show a high bifunctional activity in anodic reactions and exhibit a low potential 0.024 V for generating a current density of 10 mA cm-2 in HzOR. The overall NO3 RR-HzOR required an impressively low potential of 0.24 V for generating a current density of 10 mA cm-2 ; this potential is much lower than those required for NO3 RR-OER (1.53 V) and NO3 RR-UOR (1.31 V). A self-powered ammonia production system, prepared by assembling an NO3 RR-HzOR with a perovskite solar cell, displays a high ammonia production rate of 1.44 mg cm-2  h-1 . A single PV cell provides enough driving voltage in the PV-EC due to low required potential. This system facilitates unassisted green ammonia synthesis with a low energy consumption and also allows upcycling of wastewater to produce useful fuel.

Cationic Iridium(III) Complexes with Benzothiophene-Quinoline Ligands for Deep-Red Light-Emitting Electrochemical Cells.

Three new cationic cyclometalated iridium(III) complexes equipped with differently substituted benzo[b]thiophen-2-ylquinoline cyclometalating ligands and with a sterically demanding tert-butyl-substituted 2,2'-bipyridine ancillary ligand were synthesized and structurally characterized by NMR and X-ray diffraction techniques. To tune the electronic properties of such complexes, the quinoline moiety of the cyclometalating ligands was kept pristine or equipped with electron-withdrawing phenyl and -CF3 substituents, leading to complexes 1, 2, and 3, respectively. A complete electrochemical and photophysical investigation, supported by density functional theory calculations, permits a deep understanding of their electronic properties. The emission of all complexes arises from ligand-centered triplet states in the spectral range between 625 and 950 nm, with excited-state lifetimes between 2.10 and 6.32 µs at 298 K. The unsubstituted complex (1) exhibits the most blue-shifted emission in polymeric matrix at 298 K (λmax = 667 nm, photoluminescence quantum yield (PLQY) = 0.25 and τ = 5.32 µs). The phenyl-substituted complex (2) displays the highest photoluminescent quantum yields (up to 0.30 in polymeric matrix), while the CF3-substituted counterpart (3) shows the most red-shifted emission, peaking at approx. 720 nm, but with lower quantum yields (e.g., 0.10 in polymeric matrix at 298 K). Complexes 1 and 2 were tested in single-layer nondoped light-emitting electrochemical cells (LEECs), using a nozzle-printing technique; both devices display deep-red electroluminescence with an external quantum efficiency close to 20%.

Synergy Effect of a π-Conjugated Ionic Compound: Dual Interfacial Energy Level Regulation and Passivation to Promote Voc and Stability of Planar Perovskite Solar Cells.

Defects and energy offsets at the bulk and heterojunction interfaces of perovskite are detrimental to the efficiency and stability of perovskite solar cells (PSCs). Herein, we designed an amphiphilic π-conjugated ionic compound (QAPyBF4 ), implementing simultaneous defects passivation and interface energy level alignments. The p-type conjugated cations passivated the surface trap states and optimized energy alignment at the perovskite/hole transport layer. The highly electronegative [BF4 ]- enriched at the SnO2 interface featured desired band alignment due to the dipole moment of this interlayer. The planar n-i-p PSC had an efficiency of 23.1 % with Voc of 1.2 V. Notably, the synergy effect elevated the intrinsic endothermic decomposition temperature of the perovskite. The modified devices showed excellent long-term thermal (85 °C) and operational stability at the maximum power point for 1000 h at 45 °C under continuous one-sun illumination with no appreciable efficiency loss.

Design Strategy of Quantum Dot Thin-Film Solar Cells.

Quantum dots (QDs) are emerging photovoltaic materials that display exclusive characteristics that can be adjusted through modification of their size and surface chemistry. However, designing a QD-based optoelectronic device requires specialized approaches compared with designing conventional bulk-based solar cells. In this paper, design considerations for QD thin-film solar cells are introduced from two different viewpoints: optics and electrics. The confined energy level of QDs contributes to the adjustment of their band alignment, enabling their absorption characteristics to be adapted to a specific device purpose. However, the materials selected for this energy adjustment can increase the light loss induced by interface reflection. Thus, management of the light path is important for optical QD solar cell design, whereas surface modification is a crucial issue for the electrical design of QD solar cells. QD thin-film solar cell architectures are fabricated as a heterojunction today, and ligand exchange provides suitable doping states and enhanced carrier transfer for the junction. Lastly, the stability issues and methods on QD thin-film solar cells are surveyed. Through these strategies, a QD solar cell study can provide valuable insights for future-oriented solar cell technology.

NiMoFe and NiMoFeP as Complementary Electrocatalysts for Efficient Overall Water Splitting and Their Application in PV-Electrolysis with STH 12.3.

Complementary water splitting electrocatalysts used simultaneously in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) can simplify water splitting systems. Herein, earth-abundant NiMoFe (NMF) and phosphorized NiMoFeP (NMFP) are synthesized as complementary overall water splitting (OWS) catalysts. First, NMF is tested as both the HER and OER promoter, which exhibits low overpotentials of 68 (HER) and 337 mV (OER). A quaternary NMFP is then prepared by simple phosphorization of NMF, which shows a much lower OER overpotential of 286 mV. The enhanced OER activity is attributed to the unique surface/core structure of NMFP. The surface phosphate acts as a proton transport mediator and expedites the rate-determining step. With the application of OER potential, the NMFP surface is composed of Ni(OH)2 and FeOOH, active sites for OER, but the inner core consists of Ni, Mo, and Fe metals, serving as a conductive electron pathway. OWS with NMF-NMFP requires an applied voltage of 1.452 V to generate 10 mA cm-2 , which is one of the lowest values among OWS results with transition-metal-based electrocatalysts. Furthermore, the catalysts are combined with tandem perovskite solar cells for photovoltaic (PV)-electrolysis, producing a high solar-to-hydrogen (STH) conversion efficiency of 12.3%.

Green-Solvent-Processable, Dopant-Free Hole-Transporting Materials for Robust and Efficient Perovskite Solar Cells.

In addition to having proper energy levels and high hole mobility (µh) without the use of dopants, hole-transporting materials (HTMs) used in n-i-p-type perovskite solar cells (PSCs) should be processed using green solvents to enable environmentally friendly device fabrication. Although many HTMs have been assessed, due to the limited solubility of HTMs in green solvents, no green-solvent-processable HTM has been reported to date. Here, we report on a green-solvent-processable HTM, an asymmetric D-A polymer (asy-PBTBDT) that exhibits superior solubility even in the green solvent, 2-methylanisole, which is a known food additive. The new HTM is well matched with perovskites in terms of energy levels and attains a high µh (1.13 × 10-3 cm2/(V s)) even without the use of dopants. Using the HTM, we produced robust PSCs with 18.3% efficiency (91% retention after 30 days without encapsulation under 50%-75% relative humidity) without dopants; with dopants (bis(trifluoromethanesulfonyl) imide and tert-butylpyridine, a 20.0% efficiency was achieved. Therefore, it is a first report for a green-solvent-processable hole-transporting polymer, exhibiting the highest efficiencies reported so far for n-i-p devices with and without the dopants.

High-Field-Effect Mobility of Low-Crystallinity Conjugated Polymers with Localized Aggregates.

Charge carriers typically move faster in crystalline regions than in amorphous regions in conjugated polymers because polymer chains adopt a regular arrangement resulting in a high degree of π-π stacking in crystalline regions. In contrast, the random polymer chain orientation in amorphous regions hinders connectivity between conjugated backbones; thus, it hinders charge carrier delocalization. Various studies have attempted to enhance charge carrier transport by increasing crystallinity. However, these approaches are inevitably limited by the semicrystalline nature of conjugated polymers. Moreover, high-crystallinity conjugated polymers have proven inadequate for soft electronics applications because of their poor mechanical resilience. Increasing the polymer chain connectivity by forming localized aggregates via π-orbital overlap among several conjugated backbones in amorphous regions provides a more effective approach to efficient charge carrier transport. A simple strategy relying on the density of random copolymer alkyl side chains was developed to generate these localized aggregates. In this strategy, steric hindrance caused by these side chains was modulated to change their density. Interestingly, a random polymer exhibiting low alkyl side chain density and crystallinity displayed greatly enhanced field-effect mobility (1.37 cm(2)/(V·s)) compared with highly crystalline poly(3-hexylthiophene).

Highly Efficient Solar Water Splitting from Transferred TiO2 Nanotube Arrays.

We report a synergistic effect of flame and chemical reduction methods to maximize the efficiency of solar water splitting in transferred TiO2 nanotube (TNT) arrays on a transparent conducting oxide (TCO) substrate. The flame reduction method (>1000 °C) leads to few oxygen vacancies in the anatase TNT arrays, but it exhibits unique advantages for excellent interfacial characteristics between transferred TNT arrays and TCO substrates, which subsequently induce a cathodic on-set potential shift and sharp photocurrent evolution. By contrast, the employed chemical reduction method for TNT arrays/TCO gives rise to an abrupt increase in photocurrent density, which results from the efficient formation of oxygen vacancies in the anatase TiO2 phase, but a decrease in charge transport efficiency with increasing chemical reduction time. We show that flame reduction followed by chemical reduction could significantly improve the saturation photocurrent density and interfacial property of TNT arrays/TCO photoanodes simultaneously without mechanical fracture via the synergistic effects of coreducing methods.

Optically pumped distributed feedback dye lasing with slide-coated TiO2 inverse-opal slab as Bragg reflector.

We demonstrate an optical amplification of organic dye within a TiO2 inverse-opal (IO) distributed feedback (DFB) reflector prepared by a slide-coating method. Highly reflective TiO2 IO film was fabricated by slide coating the binary aqueous dispersions of polystyrene microspheres and charge-stabilized TiO2 nanoparticles on a glass slide and subsequently removing the polymer-opal template. TiO2 IO film was infiltrated, in turn, with the solutions of DCM, a fluorescent dye in various solvents with different indices of refraction. Optical pumping by frequency-doubled Nd:YAG laser resulted in amplified spontaneous emission in each dye solution. In accordance with the semi-empirical simulation by the FDTD method, DCM in ethanol showed the best emission/stopband matching for the TiO2 IO film used in this study. Therefore, photo excitation of a DCM/ethanol cavity showed a single-mode DFB lasing at 640 nm wavelength at moderate pump energy.

Elucidating Charge Carrier Dynamics in Perovskite-Based Tandem Solar Cells.

Recently, multijunction tandem solar cells (TSCs) have presented high power conversion efficiency and revealed their immense potential in photovoltaic evolution. It is demonstrated that multiple light absorbers with various bandgap energies overcome the Shockley-Queisser limit of single-junction solar cells by absorbing the wide-range wavelength photons. Here, the main key challenges are reviewed, especially the charge carrier dynamics in perovskite-based 2-terminal (2-T) TSCs in terms of current matching, and how to manage these issues from a vantage point of characterization. To do this, the effect of recombination layers, optical and fabrication hurdles, and the impact of wide bandgap perovskite solar cells are discussed extensively. Afterward, this review focuses on various optoelectronics, spectroscopic, and theoretical (optical simulation) characterizations to figure out those issues, especially current-matching issues faced by the photovoltaic society. This review comprehensively provides deep insights into the relationship between the current-matching problems and the photovoltaic performance of TSCs through a variety of perspectives. Consequently, it is believed that this review is essential to address the main problems of 2-T TSCs, and the suggestions to elucidate the charge carrier dynamics and its characterization may pave the way to overcome such obstacles to further improve the development of 2-T TSCs in relation to the current-matching problems.

Rugged Island-Bridge Inorganic Electronics Mounted on Locally Strain-Isolated Substrates.

Various strain isolation strategies that combine rigid and stretchable regions for stretchable electronics were recently proposed, but the vulnerability of inorganic materials to mechanical stress has emerged as a major impediment to their performance. We report a strain-isolation system that combines heteropolymers with different elastic moduli (i.e., hybrid stretchable polymers) and utilize it to construct a rugged island-bridge inorganic electronics system. Two types of prepolymers were simultaneously cross-linked to form an interpenetrating polymer network at the rigid-stretchable interface, resulting in a hybrid stretchable polymer that exhibited efficient strain isolation and mechanical stability. The system, including stretchable micro-LEDs and microheaters, demonstrated consistent operation under external strain, suggesting that the rugged island-bridge inorganic electronics mounted on a locally strain-isolated substrate offer a promising solution for replacing conventional stretchable electronics, enabling devices with a variety of form factors.

Key Factors Affecting the Stability of CsPbI3 Perovskite Quantum Dot Solar Cells: A Comprehensive Review.

The power conversion efficiency of CsPbI3 perovskite quantum dot (PQD) solar cells shows increase from 10.77% to 16.2% in a short period owing to advances in material and device design for solar cells. However, the device stability of CsPbI3 PQD solar cells remains poor in ambient conditions, which requires an in-depth understanding of the degradation mechanisms of CsPbI3 PQDs solar cells in terms of both inherent material properties and device characteristics. Along with this analysis, advanced strategies to overcome poor device stability must be conceived. In this review, fundamental mechanisms that cause the degradation of CsPbI3 PQD solar cells are discussed from the material property and device viewpoints. In addition, based on detailed insights into degradation mechanisms in CsPbI3 PQD solar cells, various strategies are introduced to improve the stability of CsPbI3 PQD solar cells. Finally, future perspectives and challenges are presented to achieve highly durable CsPbI3 PQD solar cells. The investigation of the degradation mechanisms and the stability enhancement strategies can pave the way for the commercialization of CsPbI3 PQD solar cells.

Asymmetric Polymer Additive for Morphological Regulation and Thermally Stable Organic Solar Cells.

High thermal stability is crucial for the commercialization of organic solar cells (OSCs). The thermal stability of OSCs has been improved using the tailoring blend morphology of bulk heterojunctions (BHJs). Herein, we demonstrated thermally stable OSCs in a ternary blended system containing low-crystalline semiconducting polymers (asy-PNDI1FTVT and PTB7-Th) and a non-fullerene acceptor (Y6). The asymmetric n-type semiconducting polymer (asy-PNDI1FTVT) differed from general symmetric semiconducting polymers as it randomly substituted fluorine atoms at the donor moiety (TVT), resulting in significantly lower crystallinity. asy-PNDI1FTVT in PTB7-Th:Y6 exhibited a well-mixed morphology at the BHJ and efficiently facilitated the charge dissociation process with an enhanced fill factor and power conversion efficiency. Furthermore, the ternary system of PTB7-Th:Y6:asy-PNDI1FTVT suppressed phase separation with negligible burn-in loss and performance degradation under thermal stress. The experiments showed that our devices without encapsulation retained over 90% of their initial efficiencies after 100 h at 65 °C. These results show significant potential for the development of thermally stable OSCs with reasonable efficiency.

A supramolecular gel-elastomer system for soft iontronic adhesives.

Electroadhesion provides a promising route to augment robotic functionalities with continuous, astrictive, and reversible adhesion force. However, the lack of suitable conductive/dielectric materials and processing capabilities have impeded the integration of electroadhesive modules into soft robots requiring both mechanical compliance and robustness. We present herein an iontronic adhesive based on a dynamically crosslinked gel-elastomer system, including an ionic organohydrogel as adhesive electrodes and a resilient polyurethane with high electrostatic energy density as dielectric layers. Through supramolecular design and synthesis, the dual-material system exhibits cohesive heterolayer bonding and autonomous self-healing from damages. Iontronic soft grippers that seamlessly integrate actuation, adhesive prehension, and exteroceptive sensation are devised via additive manufacturing. The grippers can capture soft and deformable items, bear high payload under reduced voltage input, and rapidly release foreign objects in contrast to electroadhesives. Our materials and iontronic mechanisms pave the way for future advancement in adhesive-enhanced multifunctional soft devices.

Trifluoromethyl-Substituted Conjugated Random Terpolymers Enable High-Performance Small and Large-Area Organic Solar Cells Using Halogen-Free Solvent.

The advancement of non-fullerene acceptors with crescent-shaped geometry has led to the need for polymer donor improvements. Additionally, there is potential to enhance the photovoltaic parameters in high-efficiency organic solar cells (OSCs). The random copolymerization method is a straightforward and effective strategy to further optimize photoactive morphology and enhance device performance. However, finding a suitable third component in terpolymers remains a crucial challenge. In this study, a series of terpolymer donors (PTF3, PTF5, PTF10, PTF20, and PTF50) is synthesized by introducing varying amounts of the trifluoromethyl-substituted unit (CF3) into the PM6 polymer backbone. Even subtle changes in the CF3 content can significantly enhance all the photovoltaic parameters due to the optimized energy levels, molecular aggregation/miscibility, and bulk-heterojunction morphology of the photoactive materials. Thus, the best binary OSC based on the PTF5:Y6-BO achieves an outstanding power conversion efficiency (PCE) of 18.2% in the unit cell and a PCE of 11.6% in the sub-module device (aperture size: 54.45 cm2 ), when using halogen-free solvent o-xylene. This work showcases the remarkable potential of the easily accessible CF3 unit as a key constituent in the construction of terpolymer donors in high-performance OSCs.

Defect Passivation through (α-Methylguanido)acetic Acid in Perovskite Solar Cell for High Operational Stability.

Defect passivation has become essential in improving efficiency and stability in perovskite solar cells. Here, we report the use of (α-methylguanido)acetic acid, also known as creatine, as a passivation molecule. It is employed both as an additive and as a surface passivation layer of perovskite thin films, given its multiple functional groups, which could address different defect sites, and its size, which could inherently affect the material structure. We prove that the surface passivation is more efficiently working by removing vulnerable defects on the surface. Hole and electron defect densities were reduced, leading to the highest power conversion efficiency of 22.6%. In addition, it can effectively protect the perovskite thin film and improve the operational stabilities in high thermal (85 °C) and humid conditions (50% relative humidity), suggesting a strong stability of the surface passivation layer.

High-Performance Perovskite Quantum Dot Solar Cells Enabled by Incorporation with Dimensionally Engineered Organic Semiconductor.

Perovskite quantum dots (PQDs) have been considered promising and effective photovoltaic absorber due to their superior optoelectronic properties and inherent material merits combining perovskites and QDs. However, they exhibit low moisture stability at room humidity (20-30%) owing to many surface defect sites generated by inefficient ligand exchange process. These surface traps must be re-passivated to improve both charge transport ability and moisture stability. To address this issue, PQD-organic semiconductor hybrid solar cells with suitable electrical properties and functional groups might dramatically improve the charge extraction and defect passivation. Conventional organic semiconductors are typically low-dimensional (1D and 2D) and prone to excessive self-aggregation, which limits chemical interaction with PQDs. In this work, we designed a new 3D star-shaped semiconducting material (Star-TrCN) to enhance the compatibility with PQDs. The robust bonding with Star-TrCN and PQDs is demonstrated by theoretical modeling and experimental validation. The Star-TrCN-PQD hybrid films show improved cubic-phase stability of CsPbI3-PQDs via reduced surface trap states and suppressed moisture penetration. As a result, the resultant devices not only achieve remarkable device stability over 1000 h at 20-30% relative humidity, but also boost power conversion efficiency up to 16.0% via forming a cascade energy band structure.

Synthesis of a redox-responsive quadruple hydrogen-bonding unit for applications in supramolecular chemistry.

A redox-responsive quadruple hydrogen-bonding module (eDAN) has been developed. The strong binding between the reduced form and its partner (DeUG) can be significantly decreased upon oxidation but restored upon subsequent reduction. This on-off switch was successfully applied to provide reversible control of macroscopic supramolecular polymer networks.

Thermodynamic control over the competitive anchoring of N719 dye on nanocrystalline TiO2 for improving photoinduced electron generation.

TiO(2) electrodes, sensitized with the N719 dye at high immersion temperatures during the sensitization process, were found to have large fractions of weakly bound N719 on the electrode surface, which resulted in dye aggregation and decreased device longevity. These disadvantages were ameliorated using a low-temperature stearic acid (SA)-assisted anchoring method described here. The activation energy (ΔE(NS)(++)) and relative fraction of strongly bound N719 were twice as large as the respective values obtained without the use of SA. Slowing of adsorption, both by thermal means and through SA-mediated processes, effectively controlled the binding mode of N719 on the surface of TiO(2). The resulting sensitized electrodes displayed enhanced device longevity and improved generation of photoinduced electrons.