RESUMO
OBJECTIVES: Low molecular weight heparin (LMWH) may provide beneficial effects on outcomes of COVID-19. We aimed to examine the impact of LMWH treatment on clinical outcomes (duration of hospitalization, admission to intensive care unit, the requirement for mechanical ventilation, and death) of COVID-19 patients with normal D-dimer levels at admission. BACKGROUND: Coronavirus disease-2019 (COVID-19) predisposes patients to arterial and venous thrombosis. METHODS: In this retrospective, multicentre and observational study we analysed the data of 308 confirmed COVID-19 patients with normal D-dimer levels at initial admission. After propensity score matching (PSM) patients were grouped; Group 1; patients who received LMWH with D-dimer ≤0.5 mg/L, Group 2; patients who received LMWH after D-dimer levels exceeded 0.5 mg/L, and Group 3; patients who did not receive LMWH. RESULTS: After PSM, each group comprised 40 patients. The patients in Group1 had the best clinical outcomes compared to the other groups. Group 3 had the worst clinical outcomes (p<0.005). The benefit of LMWH increased with early prophylactic therapy especially when started while the D-dimer levels were ≤0.5 mg/L. CONCLUSION: Our results strongly suggest that proactive LMWH therapy improves clinical outcomes in hospitalized COVID-19 patients even with normal D-dimer levels (≤ 0.5 mg/L) (Tab. 3, Fig. 2, Ref. 34).
Assuntos
COVID-19 , Heparina de Baixo Peso Molecular , Anticoagulantes , Heparina , Humanos , Peso Molecular , Estudos Retrospectivos , SARS-CoV-2RESUMO
COVID-19 requires unprecedented mobilization of the health systems to prevent the rapid spread of this unique virus, which spreads via respiratory droplet and causes respiratory disease. There is an urgent need for an accurate and rapid test method to quickly identify many infected patients and asymptomatic carriers to prevent virus transmission and assure timely treatment of the patients. This article aims as an outcome of review of the evidence on viral load and its virulence of SARS-CoV2,so that it will help in further understanding the fact useful for investigating and managing the COVID-19 cases. A search of available evidence was conducted in pub-med "COVID-19 viral load and virulence" and its associated characters world-wide and Google Scholar to capture the most recently published articles. The WHO and Centre for Disease Control and Prevention (CDC) database of publications on novel coronavirus were also screened for relevant publications. Abstracts of 55 articles were screened by two authors and 15 were included in this study based on the inclusion criteria. SARS-coV2, the causative agent of COVID-19 falls under the coronavirus family but it has higher infectivity compared to SARS and MERS with higher reproduction numbers(Ro). Virulence has been found to be different throughout the world,however lower compared to SARS and MERS,till date. The most common clinical features have been found to be cough and fever. RT - PCR remains the most sensitive and specific method for the diagnosis of COVID-19 although it is time consuming, costly and requires highly skilled human resources. Hence, newer modalities like RT- LAMP can be alternative for point of care diagnosis as this is both cost effective and requires less skilled human resources. Despite recent advances in disease diagnosis and treatment outcomes using latest technological advances in molecular biology, the global pandemic COVID-19 remains a major headache for governments across the world due to limited testing capacity and lack of appropriate treatment and vaccine.
Assuntos
COVID-19 , Infecções por Coronavirus , COVID-19/diagnóstico , Teste para COVID-19 , Infecções por Coronavirus/diagnóstico , Infecções por Coronavirus/epidemiologia , Humanos , Pandemias , RNA Viral , SARS-CoV-2 , Carga ViralRESUMO
PURPOSE: The performance of carrier-based dry powder inhaler (DPI) formulations can be critically impacted by interfacial interactions driven by tribo-electrification. Therefore, the aim of the present work was to understand how distinct API particle characteristics affect the charging behaviour of blends intended for DPI delivery. METHODS: Salbutamol sulphate (SBS) particles engineered via spray-drying and jet milling were used as model APIs. D-mannitol was selected as a model carrier. The materials were characterized concerning their different particle properties and their charge was analysed alone and in blends before and after flow over a stainless-steel pipe. RESULTS: The spray-dried SBS (amorphous and spherical) charged positively and to a higher extent than jet milled SBS (crystalline and acicular) that charged negatively and to a lower extent. D-mannitol charged positively and to a higher extent than the APIs. All drug-excipient blends charged negatively and differences were found between the spray-dried and jet milled SBS blends at 2% and 5% drug loads. CONCLUSIONS: It was demonstrated how distinct solid-states, particle shape, size and morphology as well as different water contents of the different materials can affect tribo-charging. For their binary blends, the amount and nature of fines seem to govern inter-particle contacts critically impacting charge evolution.
Assuntos
Albuterol/administração & dosagem , Manitol/química , Administração por Inalação , Química Farmacêutica/métodos , Portadores de Fármacos/química , Inaladores de Pó Seco , Excipientes/química , Humanos , Tamanho da Partícula , Pós/química , Propriedades de SuperfícieRESUMO
The objectives of this study were to develop a predictive statistical model for low-fill-weight capsule filling of inhalation products with dosator nozzles via the quality by design (QbD) approach and based on that to create refined models that include quadratic terms for significant parameters. Various controllable process parameters and uncontrolled material attributes of 12 powders were initially screened using a linear model with partial least square (PLS) regression to determine their effect on the critical quality attributes (CQA; fill weight and weight variability). After identifying critical material attributes (CMAs) and critical process parameters (CPPs) that influenced the CQA, model refinement was performed to study if interactions or quadratic terms influence the model. Based on the assessment of the effects of the CPPs and CMAs on fill weight and weight variability for low-fill-weight inhalation products, we developed an excellent linear predictive model for fill weight (R(2 )= 0.96, Q(2 )= 0.96 for powders with good flow properties and R(2 )= 0.94, Q(2 )= 0.93 for cohesive powders) and a model that provides a good approximation of the fill weight variability for each powder group. We validated the model, established a design space for the performance of different types of inhalation grade lactose on low-fill weight capsule filling and successfully used the CMAs and CPPs to predict fill weight of powders that were not included in the development set.
Assuntos
Química Farmacêutica/métodos , Composição de Medicamentos/métodos , Excipientes/química , Modelos Estatísticos , Administração por Inalação , Cápsulas , Lactose/química , Análise dos Mínimos Quadrados , Pós , Tecnologia Farmacêutica/métodosRESUMO
Environmental conditions can have a profound impact on the bulk behaviour of pharmaceutical powders, including their tribo-charging tendency. Typically, high relative humidity (RH) has been associated to a reduction in the electrostatic charge of the material. However, the occurrence of charge mitigation seems to be related to the quantity of water molecules at the powder surface, which depends on intrinsic material attributes (i.e., water sorption propensity), and external factors (i.e., RH level). In the present study, pharmaceutical powders (i.e., microcrystalline cellulose, D-mannitol, paracetamol and magnesium stearate) were conditioned at three levels of RH, relevant for pharmaceutical operations, and their bulk behaviour, including charging propensity, was analyzed. Depending on the material type, powders sorbed water from the humid atmosphere to different extents, resulting in different charging behaviours. Overall, the charge density of the materials was found to decrease after a certain RH or monotonically decrease with an increase of RH, except for D-mannitol. For this material, a contrasting trend of increase in charging was observed with an increase in RH. Moreover, the powders showed a distinct tribo-charging sensitivity to RH, with paracetamol being the most affected. These findings suggest that a careful consideration on solid material-moisture interactions is needed when using RH as strategy to minimize electrostatic effects in powder processing.
Assuntos
Emolientes , Manitol , Umidade , Pós , Eletricidade EstáticaRESUMO
Powder feeding is a crucial unit operation in continuous manufacturing (CM) of pharmaceutical products. Twin-screw feeders are typically employed to ensure the accurate mass flow of pharmaceutical materials throughout the production process. Here, contact and separation of particles can give rise to electrostatic charges, affecting feeder performance and final product quality. The knowledge of the material charging tendency would therefore be beneficial for both formulation and process design. At the early stage of product development, only a limited amount of material is available and the propensity of the powders to charge needs to be assessed on lab test equipment, which not necessarily represent the material state during processing. In this study, the tribo-charging behaviour of a set of common pharmaceutical materials (i.e., microcrystalline cellulose, D-mannitol, paracetamol and magnesium stearate) was experimentally evaluated. To this end, powder materials were let to flow over the stainless-steel pipes of the GranuCharge™ instrument. The resulting charge was compared to the one acquired during twin-screw feeding. In both cases, paracetamol exhibited the highest charging tendency followed by D-mannitol and microcrystalline cellulose and last by magnesium stearate. A good correlation was found for charge values obtained for both methods, despite the different tribo-charging mechanisms involved in the two set-ups. However, these differences in experimental set-ups led to diverse magnitudes and, in one case, polarity of charge. Additionally, an extensive material characterization was performed on the selected powders and results were statistically analyzed to identify critical material attributes (CMAs) affecting powder tribo-charging. A strong correlation was obtained between the measured charge and inter-particle friction. This indicated the latter as one of the most influencing material characteristic impacting the powder tribo-charging phenomenon of the selected materials.
Assuntos
Química Farmacêutica , Manitol , Tamanho da Partícula , Pós , Eletricidade Estática , Tecnologia FarmacêuticaRESUMO
The recent global pandemic of novel coronavirus disease 2019 (COVID-19) is increasingly alarming. As of 21 June 2020, there are more than 8.7 million cases worldwide, with 460 000 deaths. Nepal is not an exception to COVID-19 and is currently facing a challenge to prevent the spread of infection. The analysis of the detected cases, severity and outcomes of the cases within a country is important to have a clear picture of where the pandemic is heading and what measures should be taken to curb the infection before it becomes uncontrollable. We collected data regarding all the cases, recoveries and deaths attributed to COVID-19 in Nepal starting from the first case on 23 January to 21 June 2020. At present, COVID-19 has spread all over Nepal, with a rapid increase in the number of new cases and deaths, which is alarming in a low-income country with an inadequate healthcare system like Nepal. Although the government implemented early school closure and lockdown, the management to contain COVID-19 does not appear to be adequate. Understanding the current situation regarding COVID-19 in Nepal is important for providing a direction towards proper management of the disease.
RESUMO
Coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has taken more than 1 million lives globally. This study, based on the official media releases of the Government of Nepal, analyses the clinical and epidemiological features of the individuals who died as a result of COVID-19 in Nepal from 23 January to 10 August 2020. We found that nearly half of the deaths were among people less than 50 years of age and being female increased the risk of death. The majority of deaths were associated with co-morbidities, the most common being cardiovascular diseases and diabetes followed by respiratory diseases. With the approaching festive season and relaxed lockdown, both government and citizens need to be more cautious about the severity of COVID-19 and take appropriate action.
RESUMO
The application of ethylene-vinyl acetate (EVA) copolymers in reservoir-type intra-vaginal rings (IVRs) offers advantages over silicones including i) versatile properties, ii) absence of curing chemistry, and iii) continuous and flexible processing via co-extrusion. Thus, we investigated the capability of EVA based IVRs to deliver broad ranges of estradiol (E2) thereby, fulfilling the requirements of local and systemic hormone replacement therapy (HRT) and contraception. To circumvent the high material needs associated with co-extrusion, we implemented a small-scale screening procedure that accurately predicts the E2 release from IVRs comprising E2 below its solubility concentration in the core. Rational formulation design yielded the target release for local HRT (<10⯵g/day), systemic HRT (50-100⯵g/day) and contraception (>150⯵g/day, combined with a progestin). Low E2 release was achieved by the combination of low E2 loadings, low VA content of the membrane polymer (also known as coat polymer or outer shell), and increased membrane thickness. Medium E2 release was provided by medium E2 loading, low VA content of the membrane polymer, and low membrane thickness. Combining high E2 loadings, high VA content of the membrane polymer, and low membrane thickness yielded high E2 release. This makes EVA based IVRs a versatile platform that can be used to deliver a broad range of E2 doses.
Assuntos
Dispositivos Anticoncepcionais Femininos , Sistemas de Liberação de Medicamentos , Estradiol/química , Estrogênios/química , Polivinil/química , Liberação Controlada de Fármacos , SolubilidadeRESUMO
This study investigates engineered carrier, as well as engineered API particles, and shows that there are distinct performance indicators of particle engineering for carrier-based dry powder inhalers (DPIs). Spray dried (SDSS) and jet-milled (JMSS) salbutamol sulphate (SS) was blended with untreated α-lactose monohydrate (LAC_R) and α-lactose monohydrate engineered (LAC_E). Subsequent capsule filling was performed with different process settings on a dosator nozzle capsule filling machine in order to reach a target fill weight of 20-25 mg. To evaluate the performance of the different mixtures, in vitro lung deposition experiments were carried out with a next generation impactor, the emitted dose (ED) and fine particle fraction (FPF) were calculated based on the specification of the European pharmacopoeia. The FPF of micronised powder blends is significantly higher (20%) compared to the FPF of spray dried blends (5%). Compared to API engineering, carrier engineering had a positive effect on the capsule filling performance (weight variability and mean fill weight) at lower compression ratios (setting 1). Results further showed that higher compression ratios appear to be beneficial in terms of capsule filling performance (higher fill weight and less fill weight variation). Concluding, it can be stated that the carrier engineering, or generally carrier properties, govern downstream processing, whereas the API engineering and API properties govern the aerosolisation performance and thereby significantly affect the dose delivery to the lungs.
Assuntos
Aerossóis/química , Cápsulas/química , Portadores de Fármacos/química , Administração por Inalação , Inaladores de Pó Seco/métodos , Excipientes/química , Lactose/química , Tamanho da Partícula , Pós/química , Propriedades de SuperfícieRESUMO
This work evaluates several compositions of an amorphous solid dispersion (ASD) comprising nimodipine (NMD) as poorly soluble model API in a dual-polymer carrier system. HPMC E5 and Eudragit E were used for the two polymeric carriers. The formulation was designed for hot-melt extrusion (HME) and subsequent strand pelletization. The aim was to identify a formulation window with desired functional ASD performance, i.e. physical stability and immediate API release, as well as processability in strand pelletization. Samples were prepared using small-scale methods, such as vacuum compression molding (VCM) and benchtop extrusion. Miscibility and phase studies were performed for a wide range of polymer ratios and three levels of API content (10-30%â¯w/w). Ternary ASD formulations were phase-separated, yet physically stable upon exposure to elevated temperature/humidity. A study of phase composition showed that the drug molecules were predominantly solubilized in the Eudragit E fraction of the formulation. The miscibility study and Fourier-transform infrared spectroscopy indicated hydrogen (H)bond interactions between NMD and Eudragit E. In HPMC, the amorphous API was dispersed in polymeric matrix and stabilized due to anti-plasticization and the disruption of intermolecular Hbonding between API molecules. Concerning processability in strand pelletization the formulation is limited at high Eudragit E content. NMD and EE-rich phases exhibit low mixture glass transition, low melt stability and brittle breaking behavior upon strand cutting. The high viscosity and yield point of HPMC contributes to the mechanical robustness of the strand at temperatures relevant for processing. Formulation-intrinsic dissolution rates in VCM ASDs developed as an irregular function of polymer ratio, associated with diverse and competitive dissolution mechanisms in the polymers. With regard to the binary system of NMD with HPMC E5, surface crystallization was observed in VCM ASDs. For extruded pellets this was not the case, and a steady trend of formulation-intrinsic dissolution rate across different polymer ratios was observed. These discrepancies indicated a major influence of shear stress during sample preparation on HPMC-based ASD performance. Finally, a feasible formulation window within a polymer ratio of 1:2-2:3 Eudragit E:HPMC was identified in which Eudragit E acts as a dissolution rate enhancer and ASD stabilizer during dissolution.
Assuntos
Química Farmacêutica/métodos , Portadores de Fármacos/química , Nimodipina/administração & dosagem , Polímeros/química , Cristalização , Composição de Medicamentos/métodos , Liberação Controlada de Fármacos , Estabilidade de Medicamentos , Excipientes/química , Temperatura Alta , Umidade , Ligação de Hidrogênio , Derivados da Hipromelose/química , Nimodipina/química , Ácidos Polimetacrílicos/química , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , TemperaturaRESUMO
In contact-less printing, such as piezo-electric drop on demand printing used in the study, the drop formation process is independent of the substrate. This means that having developed a printable formulation, printed pharmaceutical dosage forms can be obtained on any pharmaceutical grade substrate, such as polymer-based films. In this work we evaluated eight different oral films based on their suitability as printing substrates for sodium picosulfate. The different polymer films were compared regarding printed spot morphology, chemical stability and dissolution profile. The morphology of printed sodium picosulfate was investigated with scanning electron microscopy and optical coherence tomography. The spreading of the deposited drops was found to be governed by the contact angle of the ink with the substrate. The form of the sodium picosulfate drops changed on microcrystalline cellulose films at ambient conditions over 8â¯weeks and stayed unchanged on other tested substrates. Sodium picosulfate remained amorphous on all substrates according to small and wide angle X-ray scattering, differential scanning calorimetry and polarized light microscopy measurements. The absence of chemical interactions between the drug and substrates, as indicated by infrared spectroscopy, makes all tested substrates suitable for printing sodium picosulfate onto them.
Assuntos
Composição de Medicamentos/métodos , Sistemas de Liberação de Medicamentos , Impressão , Administração Oral , Celulose/química , Citratos/química , Liberação Controlada de Fármacos , Gelatina/química , Derivados da Hipromelose/química , Compostos Organometálicos/química , Picolinas/química , Titânio/química , MolhabilidadeRESUMO
Precise filling of capsules with doses in the mg-range requires a good understanding of the filling process. Therefore, we investigated the various process steps of the filling process by dynamic and static mode tests. Dynamic tests refer to filling of capsules in a regular laboratory dosator filling machine. Static tests were conducted using a novel filling system developed by us. Three grades of lactose excipients were filled into size 3 capsules with different dosing chamber lengths, nozzle diameters and powder bed heights, and, in the dynamic mode, with two filling speeds (500, 3000â¯caps/h). The influence of the gap at the bottom of the powder container on the fill weight and variability was assessed. Different gaps resulted in a change in fill weight in all materials, although in different ways. In all cases, the fill weight of highly cohesive Lactohale 220 increased when decreasing the gap. Furthermore, experiments with the stand-alone static test tool indicated that this very challenging powder could successfully be filled without any pre-compression in the range of 5â¯mg-20â¯mg with acceptable RSDs. This finding is of great importance since for very fine lactose powders high compression ratios (dosing-chamber-length-to-powder-bed height compression ratios) may result in jamming of the piston. Moreover, it shows that the static mode setup is suitable for studying fill weight and variability. Since cohesive powders, such as Lactohale 220, are hard to fill, we investigated the impact of vibration on the process. Interestingly, we found no correlation between the reported fill weight changes in dynamic mode at 3000â¯cph and static mode using similar vibration. However, we could show that vibrations during sampling in the static mode dramatically reduced fill weight variability. Overall, our results indicate that by fine-tuning instrumental settings even very challenging powders can be filled with a low-dose dosator capsule filling machine. This study is a further step towards a scientific qualification of dosator nozzles for low-fill weight (1-45â¯mg) capsule filling.
Assuntos
Excipientes/química , Lactose/química , Tecnologia Farmacêutica/métodos , Cápsulas , Composição de Medicamentos , Desenho de Equipamento , Excipientes/normas , Lactose/normas , Tamanho da Partícula , Pós , Controle de Qualidade , Tecnologia Farmacêutica/instrumentação , Tecnologia Farmacêutica/normas , VibraçãoRESUMO
The objective of this work was to assess the effect of process parameters of a dosator nozzle machine on the powder bed uniformity of inhalation powders with various characteristics during a low-dose dosator capsule filling process. Three grades of lactose excipients were extensively characterized and filled into size 3 capsules using different dosing chamber lengths (2.5, 5mm), nozzle diameters (1.9, 3.4mm), powder bed heights (5, 10mm) and filling speeds (500, 3000capsules/h). The fill weight and the weight variability of Lactohale 100 (large particles, good flowability, low cohesion) remained almost the same, regardless of the process parameters throughout the capsule filling run time. Moreover, for this powder an increase in the fill weight at a higher filling speed was observed in all cases. Fill weight variability was significantly higher for lower dosing chamber volumes at a filling speed of 3000 capsules per hour. Lactohale 220 (small particles, poor flowability, high cohesion) delivered entirely different results. After a certain run time, depending on instrumental settings, a 'steady-state' with constant fill weights and low weight variability was achieved. For this highly cohesive powder, a high dosing chamber volume requires a low filling speed in order for the powder to completely fill the dosator nozzle. Moreover, it was established that a dosing chamber length of 2.5mm and a powder bed height of 10mm were required due to the powder's high fill weight variability over time, while the dosator size had no effect on it. In summary, the layer uniformity, the fill weight and the weight variability strongly depend on the powder characteristics and the instrumental settings. The results indicate that Lactohale 220 requires special attention during low-dose capsule filling. The study presents excellent insights into the effect of material attributes and process parameters on the layer uniformity and the quality of end product.
Assuntos
Composição de Medicamentos/métodos , Excipientes/química , Lactose/química , Tecnologia Farmacêutica/métodos , Administração por Inalação , Cápsulas , Tamanho da Partícula , PósRESUMO
The objective of this study was to analyze differences in the subtle microstructure of three different grades of HMPC hard capsule shells using mechanical, spectroscopic, microscopic and tomographic approaches. Dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), vibrational spectroscopic, X-Ray scattering techniques as well as environmental scanning electron microscopy (ESEM) and optical coherence tomography (OCT) were used. Two HPMC capsules manufactured via chemical gelling, one capsule shell manufactured via thermal gelling and one thermally gelled transparent capsule were included. Characteristic micro-structural alterations (associated manufacturing processes) such as mechanical and physical properties relevant to capsule performance and processability were thoroughly elucidated with the integration of data obtained from multi-methodological investigations. The physico-chemical and physico-mechanical data obtained from a gamut of techniques implied that thermally gelled HPMC hard capsule shells could offer an advantage in terms of machinability during capsule filling, owing to their superior micro- and macroscopic structure as well as specifically the mechanical stability under dry or humid conditions.
Assuntos
Cápsulas/química , Fenômenos Químicos , Derivados da Hipromelose/química , Fenômenos Mecânicos , Água/análiseRESUMO
We present our recent advancements in developing a viable manufacturing process for printed medicine. Our approach involves using a non-contact printing system that incorporates both piezoelectric- and solenoid valve-based inkjet printing technologies, to deliver both active and inactive pharmaceutical materials onto medical-graded orodispersible films. By using two complimentary inkjet technologies, we were able to dispense an extensive range of fluids, from aqueous drug solutions to viscous polymer coating materials. Essentially, we demonstrate printing of a wide range of formulations for patient-ready, orodispersible drug dosage forms, without the risk of drug degradation by ink heating and of substrate damages (by contact printing). In addition, our printing process has been optimized to ensure that the drug doses can be loaded onto the orally dissolvable films without introducing defects, such as holes or tears, while retaining a smooth surface texture that promotes patient adherence and allows for uniform post-coatings. Results show that our platform technology can address key issues in manufacturing orodispersible drug dosage forms and bring us closer to delivering personalized and precision medicine to targeted patient populations.
Assuntos
Preparações Farmacêuticas/química , Impressão/métodos , Tecnologia Farmacêutica/métodos , Administração Oral , Química Farmacêutica/métodos , Formas de Dosagem , Sistemas de Liberação de Medicamentos/métodos , Excipientes/química , Soluções Farmacêuticas/química , Medicina de Precisão/métodos , Propriedades de Superfície , ViscosidadeRESUMO
INTRODUCTION: Hepatitis B virus (HBV) is a current global health problem. HBV genotypes influence the treatment and long term outcome of HBV infected patients. Moreover, HBV genotypes differ in various region of the world. Such data was reported haphazardly but yet to be comprehensive for Nepal. This study attempted to find out the diverse hepatitis B genotypes in Nepal. METHODS: A convenient serum sample of 58 HBsAg positive patients from different parts of the country mainly from Nepalgunj, Palpa and Kathmandu were screened for hepatitis B genotype. Sequencing was done and Phylogenetic tree was created. RESULTS: Among 58 samples, 23 were genotype D, 17were genotype A and B wereC/D recombinant. Phylogenetic trees were created by distance-matrix and neighbor-joining analyses after bootstrapping to 1000 replicates. DISCUSSION: HBV genotypes A and D are the most common genotype in Nepal. Horizontal transmission is common in these genotypes. C/D recombinant genotype may be transmitted from Tibetan people living in Kathmandu. Prophylactic major controlling, horizontal and cross border transmission could be effective. CONCLUSIONS: Three major genotypes of HBV in Nepal were found to be A, C and D. Despite being a low prevalence area, Nepal has a diversity of hepatitis B genotypes Keywords: genotypes; HBV; phylogenetic.
Assuntos
DNA Viral/genética , Vírus da Hepatite B/genética , Hepatite B/epidemiologia , Hepatite B/virologia , Proteínas Virais/genética , Adulto , Estudos Transversais , Feminino , Genótipo , Inquéritos Epidemiológicos , Antígenos de Superfície da Hepatite B/genética , Vírus da Hepatite B/patogenicidade , Humanos , Masculino , Mutação , Nepal/epidemiologia , Filogenia , Projetos Piloto , PrevalênciaRESUMO
Sacrificing model animals is required for developing effective drugs before being used in human beings. In Japan today, at least 4,210,000 mice and other mammals are sacrificed to a total of 6,140,000 per year for the purpose of medical studies. All the animals treated in Japan, including test animals, are managed under control of "Act on Welfare and Management of Animals". Under the principle of this Act, no person shall kill, injure, or inflict cruelty on animals without due cause. "Animal" addressed in the Act can be defined as a "vertebrate animal". If we can make use of invertebrate animals in testing instead of vertebrate ones, that would be a remarkable solution for the issue of animal welfare. Furthermore, there are numerous advantages of using invertebrate animal models: less space and small equipment are enough for taking care of a large number of animals and thus are cost-effective, they can be easily handled, and many biological processes and genes are conserved between mammals and invertebrates. Today, many invertebrates have been used as animal models, but silkworms have many beneficial traits compared to mammals as well as other insects. In a Genome Pharmaceutical Institute's study, we were able to achieve a lot making use of silkworms as model animals. We would like to suggest that pharmaceutical companies and institutes consider the use of the silkworm as a model animal which is efficacious both for financial value by cost cutting and ethical aspects in animals' welfare.