Bypassing the statistical limit of singlet generation in sensitized upconversion using fluorinated conjugated systems.

The photon upconversion based on triplet-triplet annihilation (TTA) is a mechanism that converts the absorbed low-energy electromagnetic radiation into higher energy photons also at extremely low excitation intensities, but its use in actual technologies is still hindered by the limited availability of efficient annihilator moieties. We present here the results obtained by the synthesis and application of two new fluorinated chromophores based on phenazine and acridine structures, respectively. Both compounds show upconverted emission demonstrating their ability as TTA annihilator. More interesting, the acridine-based chromophore shows an excellent TTA yield that overcomes the one of some of best model systems. By correlating the experimental data and the quantum mechanical modeling of the investigated compound, we propose an alternative efficient pathway for the generation of the upconverted emissive states involving the peculiar high-energy triplet levels of the dye, thus suggesting a new development strategy for TTA annihilators based on the fine tuning of their high-energy excited states properties.

Broadband control of the optical properties of semiconductors through site-controlled self-assembly of microcrystals.

We investigate light-matter interactions in periodic silicon microcrystals fabricated combining top-down and bottom-up strategies. The morphology of the microcrystals, their periodic arrangement, and their high refractive index allow the exploration of photonic effects in microstructured architectures. We observe a notable decrease in reflectivity above the silicon bandgap from the ultraviolet to the near-infrared. Finite-difference time-domain simulations show that this phenomenon is accompanied by a ∼2-fold absorption enhancement with respect to a flat sample. Finally, we demonstrate that ordered silicon microstructures enable a fine tuning of the light absorption by changing experimentally accessible knobs as pattern and growth parameters. This work will facilitate the implementation of optoelectronic devices based on high-density microcrystals arrays with optimized light-matter interactions.

Triplet-triplet annihilation based photon up-conversion in hybrid molecule-semiconductor nanocrystal systems.

Photon up-conversion based on triplet-triplet annihilation (TTA) exploits the annihilation of optically dark triplets of an organic emitter to produce high-energy singlets that generate high energy emission. In recently proposed hybrid systems, the annihilating triplets are indirectly sensitized by light-harvesting semiconductor colloidal nanocrystals via energy transfer from their capping ligands (h-sTTA). Here, we discuss quantitatively the performance of the h-sTTA up-conversion mechanism in a reference nanocrystal/organic emitter pair, by introducing a kinetic model that points out the relationship between the up-conversion yield and the excitation intensity. This model highlights the fundamental properties of the employed moieties that mostly affect the conversion efficiency. We derive a new expression for the excitation threshold specific for h-sTTA up-conversion, which allows us to estimate a priori the material performances from a few key parameters and to point out the most severe bottlenecks. The obtained results demonstrate that the up-conversion yield is mainly limited by ultrafast non-radiative recombinations of the optical excitons created on nanocrystals, which are competitive to the sensitization channel for emitter triplets in solution. Our results suggest that the quenching partially arises from charge transfer interactions between nanocrystals and surface ligands. Improved ligand design and optimized surface functionalization strategies are required to avoid energy losses and enhance the up-conversion performance, thus promoting the application of h-sTTA up-conversion materials in solar technologies.

Cascade sensitization of triplet-triplet annihilation based photon upconversion at sub-solar irradiance.

In triplet-triplet annihilation based upconversion, high-energy photons are generated through the annihilation of fluorophore triplets, populated via energy transfer from a light-harvesting sensitizer. However, the absorption band of common sensitizers is narrow, limiting the fraction of recoverable photons. We overcome this issue using a third chromophore as an additional light-harvester in the transparency window between the upconverted luminescence and the sensitizer absorption. The third component transfers the extra-collected energy to sensitizers, realizing a cascade-sensitized upconversion that shows a 20% increment of the high-energy photon output and a conversion yield of 10% at solar irradiance.

Role of Nonradiative Defects and Environmental Oxygen on Exciton Recombination Processes in CsPbBr3 Perovskite Nanocrystals.

Lead halide perovskite nanocrystals (NCs) are emerging as optically active materials for solution-processed optoelectronic devices. Despite the technological relevance of tracing rational guidelines for optimizing their performances and stability beyond their intrinsic resilience to structural imperfections, no in-depth study of the role of selective carrier trapping and environmental conditions on their exciton dynamics has been reported to date. Here we conduct spectro-electrochemical (SEC) experiments, side-by-side to oxygen sensing measurements on CsPbBr3 NCs for the first time. We show that the application of EC potentials controls the emission intensity by altering the occupancy of defect states without degrading the NCs. Reductive potentials lead to strong (60%) emission quenching by trapping of photogenerated holes, whereas the concomitant suppression of electron trapping is nearly inconsequential to the emission efficiency. Consistently, oxidizing conditions result in minor (5%) brightening due to suppressed hole trapping, confirming that electron traps play a minor role in nonradiative decay. This behavior is rationalized through a model that links the occupancy of trap sites with the position of the NC Fermi level controlled by the EC potential. Photoluminescence measurements in controlled atmosphere reveal strong quenching by collisional interactions with O2, which is in contrast to the photobrightening effect observed in films and single crystals. This indicates that O2 acts as a scavenger of photoexcited electrons without mediation by structural defects and, together with the asymmetrical SEC response, suggests that electron-rich defects are likely less abundant in nanostructured perovskites than in the bulk, leading to an emission response dominated by direct interaction with the environment.

Strain Relaxation of InAs Quantum Dots on Misoriented InAlAs(111) Metamorphic Substrates.

We investigate in detail the role of strain relaxation and capping overgrowth in the self-assembly of InAs quantum dots by droplet epitaxy. InAs quantum dots were realized on an In0.6Al0.4As metamorphic buffer layer grown on a GaAs(111)A misoriented substrate. The comparison between the quantum electronic calculations of the optical transitions and the emission properties of the quantum dots highlights the presence of a strong quenching of the emission from larger quantum dots. Detailed analysis of the surface morphology during the capping procedure show the presence of a critical size over which the quantum dots are plastically relaxed.

Engineering Porous Emitting Framework Nanoparticles with Integrated Sensitizers for Low-Power Photon Upconversion by Triplet Fusion.

The conversion of low-energy light into photons of higher energy based on sensitized triplet-triplet annihilation (sTTA) upconversion is emerging as the most promising wavelength-shifting methodology because it operates efficiently at excitation powers as low as the solar irradiance. However, the production of solid-state upconverters suited for direct integration in devices is still an ongoing challenge owing to the difficulties concerning the organization of two complementary moieties, the triplet sensitizer, and the annihilator, which must interact efficiently. This problem is solved by fabricating porous fluorescent nanoparticles wherein the emitters are integrated into robust covalent architectures. These emitting porous aromatic framework (ePAF) nanoparticles allow intimate interaction with the included metallo-porphyrin as triplet sensitizers. Remarkably, the high concentration of framed chromophores ensures hopping-mediated triplet diffusion required for TTA, yet the low density of the framework promotes their high optical features without quenching effects, typical of the solid state. A green-to-blue photon upconversion yield as high as 15% is achieved: a record performance among annihilators in a condensed phase. Furthermore, the engineered ePAF architecture containing covalently linked sensitizers produces full-fledge solid-state bicomponent particles that behave as autonomous nanodevices.

Very High Refractive Index Transition Metal Dichalcogenide Photonic Conformal Coatings by Conversion of ALD Metal Oxides.

Materials for nanophotonic devices ideally combine ease of deposition, very high refractive index, and facile pattern formation through lithographic templating and/or etching. In this work, we present a scalable method for producing high refractive index WS2 layers by chemical conversion of WO3 synthesized via atomic layer deposition (ALD). These conformal nanocrystalline thin films demonstrate a surprisingly high index of refraction (n > 3.9), and structural fidelity compatible with lithographically defined features down to ~10 nm. Although this process yields highly polycrystalline films, the optical constants are in agreement with those reported for single crystal bulk WS2. Subsequently, we demonstrate three photonic structures - first, a two-dimensional hole array made possible by patterning and etching an ALD WO3 thin film before conversion, second, an analogue of the 2D hole array first patterned into fused silica before conformal coating and conversion, and third, a three-dimensional inverse opal photonic crystal made by conformal coating of a self-assembled polystyrene bead template. These results can be trivially extended to other transition metal dichalcogenides, thus opening new opportunities for photonic devices based on high refractive index materials.

Unraveling Triplet Excitons Photophysics in Hyper-Cross-Linked Polymeric Nanoparticles: Toward the Next Generation of Solid-State Upconverting Materials.

The technological application of sensitized upconversion based on triplet-triplet annihilation (TTA) requires the transition from systems operating in liquid solutions to solid-state materials. Here, we demonstrate that the high upconversion efficiency reported in hyper-cross-linked nanoparticles does not originate from residual mobility of the embedded dyes as it happens in soft hosts. The hyper-reticulation from one side blocks the dyes in fixed positions, but on the other one, it suppresses the nonradiative spontaneous decay of the triplet excitons, reducing intramolecular relaxations. TTA is thus enabled by an unprecedented extension of the triplet lifetime, which grants long excitons diffusion lengths by hopping among the dye framework and gives rise to high upconversion yield without any molecular displacement. This finding paves the way for the design of a new class of upconverting materials, which in principle can operate at excitation intensities even lower than those requested in liquid or in rubber hosts.

Permanent excimer superstructures by supramolecular networking of metal quantum clusters.

Excimers are evanescent quasi-particles that typically form during collisional intermolecular interactions and exist exclusively for their excited-state lifetime. We exploited the distinctive structure of metal quantum clusters to fabricate permanent excimer-like colloidal superstructures made of ground-state noninteracting gold cores, held together by a network of hydrogen bonds between their capping ligands. This previously unknown aggregation state of matter, studied through spectroscopic experiments and ab initio calculations, conveys the photophysics of excimers into stable nanoparticles, which overcome the intrinsic limitation of excimers in single-particle applications-that is, their nearly zero formation probability in ultra-diluted solutions. In vitro experiments demonstrate the suitability of the superstructures as nonresonant intracellular probes and further reveal their ability to scavenge reactive oxygen species, which enhances their potential as anticytotoxic agents for biomedical applications.

Reversed oxygen sensing using colloidal quantum wells towards highly emissive photoresponsive varnishes.

Colloidal quantum wells combine the advantages of size-tunable electronic properties with vast reactive surfaces that could allow one to realize highly emissive luminescent-sensing varnishes capable of detecting chemical agents through their reversible emission response, with great potential impact on life sciences, environmental monitoring, defence and aerospace engineering. Here we combine spectroelectrochemical measurements and spectroscopic studies in a controlled atmosphere to demonstrate the 'reversed oxygen-sensing' capability of CdSe colloidal quantum wells, that is, the exposure to oxygen reversibly increases their luminescence efficiency. Spectroelectrochemical experiments allow us to directly relate the sensing response to the occupancy of surface states. Magneto-optical measurements demonstrate that, under vacuum, heterostructured CdSe/CdS colloidal quantum wells stabilize in their negative trion state. The high starting emission efficiency provides a possible means to enhance the oxygen sensitivity by partially de-passivating the particle surfaces, thereby enhancing the density of unsaturated sites with a minimal cost in term of luminescence losses.