Layer-by-layer thinning of two-dimensional materials.

Etching technology - one of the representative modern semiconductor device makers - serves as a broad descriptor for the process of removing material from the surfaces of various materials, whether partially or entirely. Meanwhile, thinning technology represents a novel and highly specialized approach within the realm of etching technology. It indicates the importance of achieving an exceptionally sophisticated and precise removal of material, layer-by-layer, at the nanoscale. Notably, thinning technology has gained substantial momentum, particularly in top-down strategies aimed at pushing the frontiers of nano-worlds. This rapid development in thinning technology has generated substantial interest among researchers from diverse backgrounds, including those in the fields of chemistry, physics, and engineering. Precisely and expertly controlling the layer numbers of 2D materials through the thinning procedure has been considered as a crucial step. This is because the thinning processes lead to variations in the electrical and optical characteristics. In this comprehensive review, the strategies for top-down thinning of representative 2D materials (e.g., graphene, black phosphorus, MoS2, h-BN, WS2, MoSe2, and WSe2) based on conventional plasma-assisted thinning, integrated cyclic plasma-assisted thinning, laser-assisted thinning, metal-assisted splitting, and layer-resolved splitting are covered in detail, along with their mechanisms and benefits. Additionally, this review further explores the latest advancements in terms of the potential advantages of semiconductor devices achieved by top-down 2D material thinning procedures.

Novel MoS2-In2O3-WS2 (2D/3D/2D) ternary heterostructure nanocomposite material: Efficient photocatalytic degradation of antimicrobial agents under visible-light.

Fabrication of ternary composited photocatalytic nanomaterials with strong interaction is vital to deriving the fast charge separation for efficient photodegradation of organic contaminants in wastewater under visible light. In this work, novel ternary 2D/3D/2D MoS2-In2O3-WS2 multi-nanostructures were synthesized using facile hydrothermal processes. XRD, FTIR, and XPS results confirmed the phase, functional groups, and element composition of pure MoS2, MoS2-In2O3, and MoS2-In2O3-WS2 hybrids. UV-DRS spectra of the MoS2-In2O3-WS2 ternary hybrid indicate maximum absorption in the visible light range with a band-gap energy value of 2.4 eV. The surface of the 2D WS2 nanosheet structure tightly blends and densely disperses 2D MoS2 nanosheets and 3D In2O3 nanocubes. This confirmed the formation of the MoS2-In2O3-WS2 ternary hybrid in the form of 2D/3D/2D multi-nanostructures, which is also indicated from SEM and HR-TEM images. The synthesized MoS2-In2O3-WS2 ternary hybrid showed maximum photocatalytic activity under visible-light for antimicrobial agents such as triclosan (TCS) and trichlorocarban (TCC). The photocatalytic activity of TCS was revealed to be 95% at 90 min, while that of TCC was 93% at 100 min. The reusability and stability tests of the prepared MoS2-In2O3-WS2 ternary hybrid after four consecutive photocatalytic cycles were analyzed by FTIR and SEM, which indicated that the prepared ternary hybrid was very stable. Overall results suggested that the developed MoS2-In2O3-WS2 (2D/3D/2D) multi-nanostructures are environmentally friendly and low-cost nanocomposites as a potential photocatalyst for the removal of antimicrobial agents from wastewater.

Carbon and graphene quantum dots based architectonics for efficient aqueous decontamination by adsorption chromatography technique - Current state and prospects.

Aquatic ecosystems and potable water are being exploited and depleted due to urbanization and the encouragement of extensive industrialization, which induces the scarcity of pure water. However, current decontamination methods are limited and inefficient. Various innovative remediation strategies with novel nanomaterials have recently been demonstrated for wastewater treatment. Carbon dots (C-dots) and graphene quantum dots (GQ-dots) are the most recent frontiers in carbon nanomaterial-based adsorption studies. C-dots are extremely small (1-10 nm) quasi-spherical carbon nanoparticles (mostly sp3 hybridized carbon), whereas GQ-dots are fragments of graphene (1-20 nm) composed of primarily sp2 hybridized carbon. This article highlights the function of C-dots and GQ-dots with their specifications and characteristics for the efficient removal of organic and inorganic contaminants in water via adsorption chromatography. The alteration of adsorption attributes with the hybrid blending of these dots has been critically analyzed. Moreover, various top-down and bottom-up approaches for synthesizing C-dots and GQ-dots, which ultimately affect their morphology and structure, are described in detail. Finally, we review the research deficit in the adsorption of diverse pollutants, fabrication challenges, low molecular weight, self-agglomeration, and the future of the dots by providing research prospects and selectivity and sensitivity perspectives, the importance of post-adsorption optimization strategies and the path toward scalability at the tail of the article.

Self-assembled mesoporous silica decorated with biogenic carbon dot nanospheres hybrid nanomaterial for efficient removal of aqueous Methoxy-DDT via a Short-Bed Adsorption column technique.

Methoxy-DDT is an organochlorine pesticide extensively used in agricultural practices as a DDT substitute. Methoxy-DDT has been found and quantified in several investigations in groundwater, drinking water, sediment, and various biota. Therefore, designing efficient and cost-effective adsorbents for removing methoxy-DDT is vital. In this work, we embedded Ficus benghalensis L. derived carbon dots (CDs) in mesoporous silica (MS) to fabricate MS-CDs nanohybrid material. MS-CDs nanohybrid exhibited remarkable selectivity and removal efficiency towards methoxy-DDT, outperforming other endocrine disruptors. Parameters for industrial-scale fixed-bed adsorption columns, such as bed capacity, length, and breakthrough times, were analyzed. The kinetic study revealed that pseudo-second-order (PSO) adsorption and isotherm analysis confirmed the Langmuir model as the best fit. Small bed adsorption (SBA) column analysis was carried out using spiked Yamuna river water, and the breakthrough curves were demonstrated by varying MS-CDs bed height. The maximum adsorption capacity obtained for methoxy-DDT was 17.16 mg/g at breakthrough and 49.98 mg/g at exhaustion. The adsorbent showed 86.53% removal efficiency in the 5th cycle, demonstrating good reusability. These results indicate that the developed material MS-CDs-based organic sphere is an effective adsorbent for aqueous methoxy-DDT adsorption and can be applied to wastewater treatment.

Towards a replacement therapy for stimulant betel quid dependence: A proof of concept study.

Stimulant betel quid (SBQ) containing Piper betle leaf (L), green unripe Areca catechu nut (AN) and the alkalizing agent, slaked lime, is an addictive, carcinogenic stimulant, with no pharmacotherapy, chewed by millions of people in the Asia/Pacific region. We compared the in vivo physiological profile of chewing (1) non-stimulant P. betle leaf+AN (LAN), (2) SBQ utilizing slaked lime and (3) a novel SBQ utilizing Mg(OH)2 , as an alkalizing agent, by measuring physiological parameters of intoxication and these were correlated with in vitro levels of alkaloids measured by UHPLC-MS/MS. Chewing LAN, which contains high levels of arecoline, had no stimulatory physiological effect. Chewing SBQ containing slaked lime or novel SBQ containing Mg(OH)2 , induced equivalent stimulatory physiological responses. In vitro, slaked lime hydrolyzed muscarinic esters in LAN while Mg(OH)2 did not. The physiological stimulation induced by chewing both SBQ and the lack of physiology to chewing LAN can be explained by changes in lipid solubility of phytochemicals induced by mouth pH during chewing of basic SBQ or acidic LAN. Since antiquity people have added slaked lime to SBQ to enhance absorption of phyto-chemicals across oral membranes to stimulate physiology. The same physiological changes can be induced by substituting slaked lime for less physically and chemically destructive bases. If attitudes regarding SBQ dependence can advance towards the more progressive attitudes already used to help smokers quit tobacco, modern chemistry has the potential to make chewing SBQ safer and quitting programs may become more accessible and efficacious.

Highly electrochemically active Ti3C2Tx MXene/MWCNT nanocomposite for the simultaneous sensing of paracetamol, theophylline, and caffeine in human blood samples.

The facile fabrication is reported of highly electrochemically active Ti3C2Tx MXene/MWCNT (3D/1D)-modified screen-printed carbon electrode (SPE) for the efficient simultaneous electrochemical detection of paracetamol, theophylline, and caffeine in human blood samples. 3D/1D Ti3C2Tx MXene/MWCNT nanocomposite was synthesized using microwave irradiation and ultrasonication processes. Then, the Ti3C2Tx/MWCNT-modified SPE electrode was fabricated and thoroughly characterized towards its physicochemical and electrochemical properties using XPS, TEM, FESEM, XRD, electrochemical impedance spectroscopy, cyclic voltammetry, and differential pulse voltammetry techniques. As-constructed Ti3C2Tx-MWCNT/SPE offers excellent electrochemical sensing performance with good detection limits (0.23, 0.57, and 0.43 µM) and wide linear ranges (1.0 ~ 90.1, 2.0 ~ 62.0, and 2.0-90.9 µM) for paracetamol, caffeine, and theophylline, respectively,  in the human samples. Notably, the non-enzymatic electroactive nanocomposite-modified electrode has depicted a semicircle Nyquist plot with low charge transfer resistance (Rct∼95 Ω), leading to high ionic diffusion and facilitating an excellent electron transfer path. All the above results in efficient stability, reproducibility, repeatability, and sensitivity compared with other reported works, and thus, it claims its practical utilization in realistic clinical applications.

Rapid green analytical methodology for simultaneous monitoring of nitrosamines and semi-volatile organic compounds in water and human urine samples.

Nitrosamines and semi-volatile organic compounds (SVOCs) are carcinogenic contaminants in water and biological matrices. Conventional analytical methods often struggle to detect trace concentrations due to poor extraction efficacies. This study presents a novel, low-cost, in-syringe-assisted fast extraction cum cleanup technique coupled with GC-FID for monitoring four nitrosamines and two SVOCs in drinking water and human urine samples to measure the contamination and exposure levels. This extraction protocol combines a novel green in-syringe liquid-liquid extraction step using dimethyl carbonate as the green extraction solvent, coupled with a semi-automated solid-phase extraction cleanup process. Then, the final extractant is analyzed using gas chromatography-flame ionization detection (GC-FID) for monitoring. The method demonstrated excellent linearity (R2 > 0.998) between 1.5 and 500 ng mL⁻1 for all six target compounds. Detection limits ranged from 1.0 to 2.0 ng mL⁻1. Extraction recoveries were between 87 and 105% for both urine samples and water samples. Intra-day and inter-day precision were below 9% RSD. The blue applicability grade index evaluation scored 70.0, indicating good practical applicability. The developed analytical protocol offers a sensitive, accurate, low-cost, rapid, and environmentally friendly method for simultaneously quantifying multiple nitrosamines and SVOCs in environmental and human samples. Its performance characteristics and sustainability metrics suggest the potential for broad application in monitoring and exposure studies.

Advances in perfluoro-alkylated compounds (PFAS) detection in seafood and marine environments: A comprehensive review on analytical techniques and global regulations.

Per- and poly-fluoroalkyl substances (PFAS) are persistent organic pollutants that severely threaten the environment and human health due to their distinct chemical composition, extensive production, widespread distribution, bioaccumulation in nature, and long-term persistence. This review focuses on the occurrence and sources of PFAS in seafood, with a particular emphasis on advanced detection methods viz. nanoparticle-based, biosensor-based, and metal-organic frameworks-based, and mass spectrometric techniques. The challenges associated with these advanced detection technologies are also discussed. Recent research and regulatory updates about PFAS, including hazardous and potential health effects, epidemiological studies, and various risk assessment models, have been reviewed. In addition, the need for global monitoring programs and regulations on PFAS are critically reviewed by underscoring their crucial role in protecting human health and the environment. Further, approaches for reducing PFAS in seafood are highlighted with future innovative remediation directions. Although advanced PFAS analytical methods are available, selectivity, sample preparation, and sensitivity are still significant challenges associated with detection of PFAS in seafood matrices.  Moreover, crucial research gaps and solutions to essential concerns are critically explored in this review.

Exposure, toxicological mechanism of endocrine disrupting compounds and future direction of identification using nano-architectonics.

Endocrine-disrupting compounds (EDC) are a group of exogenous chemicals that structurally mimic hormones and interfere with the hormonal signaling cascade. EDC interacts with hormone receptors, transcriptional activators, and co-activators, altering the signaling pathway at both genomic and non-genomic levels. Consequently, these compounds are responsible for adverse health ailments such as cancer, reproductive issues, obesity, and cardiovascular and neurological disorders. The persistent nature and increasing incidence of environmental contamination from anthropogenic and industrial effluents have become a global concern, resulting in a movement in both developed and developing countries to identify and estimate the degree of exposure to EDC. The U.S. Environment Protection Agency (EPA) has outlined a series of in vitro and in vivo assays to screen potential endocrine disruptors. However, the multidisciplinary nature and concerns over the widespread application demand alternative and practical techniques for identifying and estimating EDC. The review chronicles the state-of-art 20 years (1990-2023) of scientific literature regarding EDC's exposure and molecular mechanism, highlighting the toxicological effects on the biological system. Alteration in signaling mechanisms by representative endocrine disruptors such as bisphenol A (BPA), diethylstilbestrol (DES), and genistein has been emphasized. We further discuss the currently available assays and techniques for in vitro detection and propose the prominence of designing nano-architectonic-sensor substrates for on-site detection of EDC in the contaminated aqueous environment.

Current perspectives of metal-based nanomaterials as photocatalytic antimicrobial agents and their therapeutic modes of action: A review.

Efforts to restrict the emergence and progression of multidrug-resistant bacterial strains should heavily involve the scientific community, including government bodies, researchers, and industries, in developing new and effective photocatalytic antimicrobial agents. Such changes warrant the modernization and upscaling of materials synthesis laboratories to support and expedite the mass production of materials at the industrial scale for the benefit of humankind and the environment. Despite the massive volume of publications reporting the potential usage of different types of metal-based nanomaterials as antimicrobial agents, reviews uncovering the similarities and differences among the various products remain lacking. This review details the basic and unique properties of metal-based nanoparticles, their use as photocatalytic antimicrobial agents, and their therapeutic modes of action. It shall be noted that compared to traditional antibiotics, the mode of action of photocatalytic metal-based nanomaterials for killing microorganisms are completely different, despite displaying promising performance against antibiotic-resistant bacteria. Besides, this review uncovers the differences in the mode of actions of metal oxide nanoparticles against different types of bacteria, as well as towards viruses. Last but not least, this review comprehensively describes previous published clinical trials and medical usages involving contemporary photocatalytic antimicrobial agents.

Eco-friendly fabrication of nonenzymatic electrochemical sensor based on cobalt/polymelamine/nitrogen-doped graphitic-porous carbon nanohybrid material for glucose monitoring in human blood.

The design and development of eco-friendly fabrication of cost-effective electrochemical nonenzymatic biosensors with enhanced sensitivity and selectivity are one of the emerging area in nanomaterial and analytical chemistry. In this aspect, we developed a facile fabrication of tertiary nanocomposite material based on cobalt and polymelamine/nitrogen-doped graphitic porous carbon nanohybrid composite (Co-PM-NDGPC/SPE) for the application as a nonenzymatic electrochemical sensor to quantify glucose in human blood samples. Co-PM-NDGPC/SPE nanocomposite electrode fabrication was achieved using a single-step electrodeposition method under cyclic voltammetry (CV) technique under 1 M NH4Cl solution at 20 constitutive CV cycles (sweep rate 20 mV/s). Notably, the fabricated nonenzymatic electroactive nanocomposite material exhibited excellent electrocatalytic sensing towards the quantification of glucose in 0.1 M NaOH over a wide concentration range from 0.03 to 1.071 mM with a sensitive limit of detection 7.8 µM. Moreover, the Co-PM-NDGPC nanocomposite electrode with low charge transfer resistance (Rct∼81 Ω) and high ionic diffusion indicates excellent stability, reproducibility, and high sensitivity. The fabricated nanocomposite materials exhibit a commendable sensing response toward glucose molecules present in the blood serum samples recommends its usage in real-time applications.

Sustainable approaches on industrial food wastes to value-added products - A review on extraction methods, characterizations, and its biomedical applications.

The concept of zero waste discharge has been gaining importance in recent years towards attaining a sustainable environment. Fruit processing industries generate millions of tons of byproducts like fruit peels and seeds, and their disposal poses an environmental threat. The concept of extracting value-added bioactive compounds from bio-waste is an excellent opportunity to mitigate environmental issues. To date, significant research has been carried out on the extraction of essential biomolecules, particularly polysaccharides from waste generated by fruit processing industries. In this review article, we aim to summarize the different extraction methodologies, characterization methods, and biomedical applications of polysaccharides extracted from seeds and peels of different fruit sources. The review also focuses on the general scheme of extraction of polysaccharides from fruit waste with special emphasis on various methods used in extraction. Also, the various types of polysaccharides obtained from fruit processing industrial wastes are explained in consonance with the important techniques related to the structural elucidation of polysaccharides obtained from seed and peel waste. The use of seed polysaccharides as pharmaceutical excipients and the application of peel polysaccharides possessing biological activities are also elaborated.

Novel fast pesticides extraction (FaPEx) strategy coupled with UHPLC-MS/MS for rapid monitoring of emerging pollutant fipronil and its metabolite in food and environmental samples.

In this work, we demonstrated a new, environmental-friendly and effective sample preparation strategy named 'in-syringe-assisted fast pesticides extraction (FaPEx)' technique coupled with LC-MS/MS for the rapid identification and monitoring of emerging pollutant fipronil and its metabolite fipronil sulfone in chicken egg and environmental soil samples. FaPEx strategy comprising of two simple steps. Firstly, the sample was placed in the syringe and extracted using low-volume acetonitrile with NaCl and anhydrous MgSO4 salts. Secondly, the extractant was passed through in-syringe-based solid-phase extraction (SPE) kit containing cleanup sorbents and salt combinations (C18, primary secondary amine, and anhydrous MgSO4) for the cleanup process. Then, the obtained clean extractant was injected into LC-MS/MS for the quantification of target analytes. Various important parameters influencing the FaPEx performances, such as solvent type, salt type, salt amount, sorbent type, and amount, were examined and optimized. The method validation results showed excellent linearity with high correlation coefficients were ≥ 0.99. The estimated LODs were between 0.05-0.07 µg/kg, and LOQs ranged between 0.1-0.25 µg/kg for target analytes in both egg and soil sample matrices, and precision values were ≤7.90%. The developed method was applied to commercial chicken egg samples and environmental soil samples analysis. Spiked recoveries ranged between 88.75-110.91% for egg samples with RSDs ≤7.42% and 82.47-107.46% for soil samples with RSDs <7.37%. These results proved that the developed sample preparation method is a simple, fast, green, low-cost, and efficient method for the analysis of fipronil and its metabolites in food and environmental samples. Thus, this method can be applied as an alternative analytical methodology in routine and standard food and environmental testing laboratories.

Valorization of nano-based lignocellulosic derivatives to procure commercially significant value-added products for biomedical applications.

Biowaste, produced from nature, is preferred to be a good source of carbon and ligninolytic machinery for many microorganisms. They are complex biopolymers composed of lignin, cellulose, and hemicellulose traces. This biomass can be depolymerized to its nano-dimensions to gain exceptional properties useful in the field of cosmetics, pharmaceuticals, high-strength materials, etc. Nano-sized biomass derivatives overcome the inherent drawbacks of the parent material and offer promises as a potential material for a wide range of applications with their unique traits such as low-toxicity, biocompatibility, biodegradability and environmentally friendly nature with versatility. This review focuses on the production of value-added products feasible from nanocellulose, nano lignin, and xylan nanoparticles which is quite a novel study of its kind. Dawn of nanotechnology has converted bio waste by-products (hemicellulose and lignin) into useful precursors for many commercial products. Nano-cellulose has been employed in the fields of electronics, cosmetics, drug delivery, scaffolds, fillers, packaging, and engineering structures. Xylan nanoparticles and nano lignin have numerous applications as stabilizers, additives, textiles, adhesives, emulsifiers, and prodrugs for many polyphenols with an encapsulation efficiency of 50%. This study will support the potential development of composites for emerging applications in all aspects of interest and open up novel paths for multifunctional biomaterials in nano-dimensions for cosmetic, drug carrier, and clinical applications.

A low-cost eco-friendly fast drug extraction (FaDEx) technique for environmental and bio-monitoring of psychoactive drug in urban water and sports-persons' urine samples.

Nicotine is the most prominent psychoactive/addictive chemical substance consumed worldwide among young players in team sports. Moreover, urinary nicotine discharge and nicotine-based products disposal in environmental waters has been unavoidable in recent years. Therefore, sensitive monitoring of nicotine content in environmental waters and human urine samples is essential. In this study, we developed a miniaturized novel green, low-cost, sensitive, in-syringe-based semi-automated fast drug extraction (FaDEx) protocol coupled with gas chromatography-flame ionization detection (GC-FID) for the efficient environmental and bio-monitoring of nicotine in aqueous samples. The FaDEx method consists of two steps; firstly, the target analyte was extracted using dimethyl carbonate (a green solvent) and extraction salts. After that, the extraction solvent was passed automatically through the solid-phase extraction cartridge at a constant flow rate for the cleanup process to achieve the sensitive nicotine analysis by GC-FID. Under optimized experimental conditions, the developed method showed excellent linearity over the concentration ranges between 20-2000 ng mL-1 with a correlation coefficient >0.99. The detection and quantification limits were 4 and 20 ng mL-1, respectively. The presented method was applied to monitor and assess nicotine exposure in sports-persons' urine and environmental water samples. The method accuracy and precision in terms of relative recovery and relative standard deviation (for triplicate analysis) were 85.4-110.2% and ≤8%, respectively. Finally, the impact of our procedure on the environment from a green analytical chemistry view was assessed using a novel metric system called AGREE, and obtained the greenness score of 0.87, indicating its an efficient alternative green analytical protocol for routine environmental and bio-monitoring of nicotine in environmental and biological samples.

Untargeted Lipidomic Profiling Reveals Lysophosphatidylcholine and Ceramide as Atherosclerotic Risk Factors in apolipoprotein E Knockout Mice.

Despite the availability and use of numerous cholesterol-lowering drugs, atherosclerotic cardiovascular disease (ASCVD) remains the leading cause of mortality globally. Many researchers have focused their effort on identifying modified lipoproteins. However, lipid moieties such as lysophosphatidylcholine (LPC) and ceramide (CER) contribute to atherogenic events. LPC and CER both cause endothelial mitochondrial dysfunction, leading to fatty acid and triglyceride (TG) accumulation. In addition, they cause immune cells to differentiate into proinflammatory phenotypes. To uncover alternative therapeutic approaches other than cholesterol- and TG-lowering medications, we conducted untargeted lipidomic investigations to assess the alteration of lipid profiles in apolipoprotein E knockout (apoE-/-) mouse model, with or without feeding a high-fat diet (HFD). Results indicated that, in addition to hypercholesterolemia and hyperlipidemia, LPC levels were two to four times higher in apoE-/- mice compared to wild-type mice in C57BL/6 background, regardless of whether they were 8 or 16 weeks old. Sphingomyelin (SM) and CER were elevated three- to five-fold in apoE-/- mice both at the basal level and after 16 weeks when compared to wild-type mice. After HFD treatment, the difference in CER levels elevated more than ten-fold. Considering the atherogenic properties of LPC and CER, they may also contribute to the early onset of atherosclerosis in apoE-/- mice. In summary, the HFD-fed apoE-/- mouse shows elevated LPC and CER contents and is a suitable model for developing LPC- and CER-lowering therapies.

Rapid Identification and Analysis of Ochratoxin-A in Food and Agricultural Soil Samples Using a Novel Semi-Automated In-Syringe Based Fast Mycotoxin Extraction (FaMEx) Technique Coupled with UHPLC-MS/MS.

In this work, a fast mycotoxin extraction (FaMEx) technique was developed for the rapid identification and quantification of carcinogenic ochratoxin-A (OTA) in food (coffee and tea) and agricultural soil samples using ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) detection. The FaMEx technique advancement is based on two plastic syringes integrated setup for rapid extraction and its subsequent controlled clean-up process. In the extraction process, a 0.25-g sample and extraction solvent were added to the first syringe barrel for the vortex-based extraction. Then, the extraction syringe was connected to a clean-up syringe (pre-packed with C18, activated carbon, and MgSO4) with a syringe filter. Afterward, the whole set-up was placed in an automated programmable mechanical set-up for controlled elution. To enhance FaMEx technology performance, the various influencing sample pretreatment parameters were optimized. Furthermore, the developed FaMEx method indicated excellent linearity (0.9998 and 0.9996 for coffee/tea and soil) with highly sensitive detection (0.30 and 0.29 ng/mL for coffee/tea and soil) and quantification limits (1.0 and 0.96 for coffee/tea and soil), which is lower than the toxicity limit compliant with the European Union regulation for OTA (5 ng/g). The method showed acceptable relative recovery (84.48 to 100.59%) with <7.34% of relative standard deviation for evaluated real samples, and the matrix effects were calculated as <-13.77% for coffee/tea and -9.7 for soil samples. The obtained results revealed that the developed semi-automated FaMEx/UHPLC-MS/MS technique is easy, fast, low-cost, sensitive, and precise for mycotoxin detection in food and environmental samples.

Facile analysis of mycotoxin in coffee and tea samples using a novel semi-automated in-syringe based fast mycotoxin extraction (FaMEx) technique coupled with direct-injection ESI-MS/MS analysis.

Identifying the risk of ochratoxin A in our daily food has become fundamental because of its toxicity. In this work, we report a novel semi-automated in-syringe-based fast mycotoxin extraction (IS-FaMEx) technique coupled with direct-injection electrospray-ionization tandem mass spectrometer (ESI-MS/MS) detection for the quantification of ochratoxin A in coffee and tea samples. Under the optimized conditions, the results reveal that the developed method's linearity was more remarkable, with a correlation coefficient of > 0.999 and > 92% extraction recovery with a precision of 6%. The detection and quantification limits for ochratoxin A were 0.2 and 0.8 ng g-1 for the developed method, respectively, which is lower than the European Union regulatory limit of toxicity for ochratoxin-A (5 ng g-1) in coffee. Furthermore, the newly developed modified IS-FaMEx-ESI-MS/MS exhibited lower signal suppression of 8% with a good green metric score of 0.64. In addition, the IS-FaMEx-ESI-MS/MS showed good extraction recovery, matrix elimination, good detection, and quantification limits with high accuracy and precision due to the fewer extraction steps with semi-automation. Therefore, the presented method can be applied as a potential methodology for the detection of mycotoxins in food products for food safety and quality control purposes. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05733-z.

Thin layer chromatography/desorption flame-induced atmospheric pressure chemical ionization/mass spectrometry for the analysis of volatile and semi-volatile mixtures.

Flame-induced atmospheric pressure chemical ionization (FAPCI) has been used to directly characterize chemical compounds on a glass rod and drug tablet surfaces. In this study, FAPCI was further applied to interface thin layer chromatography (TLC) and mass spectrometry (MS) for mixture analysis. METHODS: A micro-sized oxyacetylene flame was generated using a small concentric tube system. Hot gas flow and primary reactive species from the micro-flame were directed toward a developed TLC gel plate to thermally desorb and ionize analytes on the gel surface. The resulting analyte ions subsequently entered the MS inlet for detection. RESULTS: A 1-1.5-mm-wide light-brown line was observed on the TLC plate after the desorption FAPCI/MS (DFAPCI/MS) analysis, revealing that the gel surface withstood a high temperature from the impact of the micro-flame. Volatile and semi-volatile chemical compounds, including amine and amide standards, drugs, and aromatherapy oils, were successfully desorbed, ionized, and detected using this TLC/DFAPCI/MS. The limit of detection of TLC-DFAPCI/MS was determined to be 5 ng/spot for dibenzylamine and ethenzamide. CONCLUSIONS: TLC/DFAPCI/MS is one of the simplest TLC-MS interfaces showing the advantages such as low costs and an easy set up. The technique is useful for characterizing thermally stable volatile and semi-volatile compounds in a mixture.

Microwave-assisted green synthesis of multi-functional carbon quantum dots as efficient fluorescence sensor for ultra-trace level monitoring of ammonia in environmental water.

This study reports a facile green preparation of self-assembled multi-functional carbon quantum dots (CQDs) via direct pyrolysis technique coupled with microwave-assisted synthesis using Ziziphus Mauritiana stone biomass (as a bio-resource precursor). The synthesized multi-functional CQDs was characterized using FT-IR, XRD, XPS, TEM, and fluorescence spectroscopy techniques. The results exhibit that the prepared CQDs are spherical-shaped with an average diameter of 2-4 nm and showed bright bluish-green emissions property with stable dispersion and high photostability in the aqueous medium. Furthermore, the emission properties of CQDs were examined by quenched with ammonia (NH3) and other molecules in aqueous media. Results indicated that the developed CQDs showed effective fluorescent for the selective and sensitive detection (sensor) of NH3 with a detection limit of 10 nM. Thus, the presented procedure is a simple, low-cost, efficient, chemical-free synthesis of CQDs and can be applied as selective and sensitive (sensor) monitoring of NH3 concentration in aquatic environmental samples.