Habitat modulates population-level responses of freshwater salmon growth to a century of change in climate and competition.

The impacts of climate change are widespread and threaten natural systems globally. Yet, within regions, heterogeneous physical landscapes can differentially filter climate, leading to local response diversity. For example, it is possible that while freshwater lakes are sensitive to climate change, they may exhibit a diversity of thermal responses owing to their unique morphology, which in turn can differentially affect the growth and survival of vulnerable biota such as fishes. In particular, salmonids are cold-water fishes with complex life histories shaped by diverse freshwater habitats that are sensitive to warming temperatures. Here we examine the influence of habitat on the growth of sockeye salmon (Oncorhynchus nerka) in nursery lakes of Canada's Skeena River watershed over a century of change in regional temperature and intraspecific competition. We found that freshwater growth has generally increased over the last century. While growth tended to be higher in years with relatively higher summer air temperatures (a proxy for lake temperature), long-term increases in growth appear largely influenced by reduced competition. However, habitat played an important role in modulating the effect of high temperature. Specifically, growth was positively associated with rising temperatures in relatively deep (>50 m) nursery lakes, whereas warmer temperatures were not associated with a change in growth for fish among shallow lakes. The influence of temperature on growth also was modulated by glacier extent whereby the growth of fish from lakes situated in watersheds with little (i.e., <5%) glacier cover increased with rising temperatures, but decreased with rising temperatures for fish in lakes within more glaciated watersheds. Maintaining the integrity of an array of freshwater habitats-and the processes that generate and maintain them-will help foster a diverse climate-response portfolio for important fish species, which in turn can ensure that salmon watersheds are resilient to future environmental change.

Commissioning of Mobius3D/FX for patient-specific quality assurance: The CUIMC-NewYork Presbyterian Hospital experience.

PURPOSE: To present the process undertaken by our institute in commissioning Mobius3D (M3D) for patient-specific quality assurance. METHOD: 168 plans were randomly selected to compare dose distribution measured with ArcCheck and dose calculated from M3D, both compared against the treatment planning system (TPS). The gamma criteria for measurement and M3D are 3%/2 mm with 10% and 50% dose thresholds, respectively. The effect of tissue inhomogeneity was investigated on 11 plans by recalculating the dose in M3D on a homogeneous phantom. Tolerance and action limits were established following the AAPM Task Group 218 recommendations. RESULTS: The M3D showed high variability in gamma passing rate compared to the measurement. Twenty-three out of 168 plans had false negative dose comparisons. These plans fall under high tissue inhomogeneity like lung and metal implants, small field targets, and breast plans planned with high energy. One false negative case (0.6%) was observed. A single tolerance limit of 91% and 92% gamma passing rate for the M3D and measurement-based PSQA were established, respectively. Against the expectation, recalculating plans on the homogeneous phantom in M3D did not necessarily increase the gamma passing rate. These plans have a duty cycle >4.2, and the small field sizes combined with differences in slice thickness contributed to observed dose differences in the homogeneous phantom comparisons. CONCLUSION: Following the commissioning, M3D is adopted in our institute. Currently, the gamma criteria used for measurement and M3D are 3%/2 mm, 40% dose threshold, with gamma passing rates of 92% and 95%, respectively. A higher passing rate for M3D is adopted until more data is available. The combined effect of plan modulation, the field sizes, the tissue inhomogeneity, the dose algorithm, and the volume averaging effect from differences in slice thickness can contribute to the differences in dose in M3D and TPS.

Triplets with a Twist: Ultrafast Intersystem Crossing in a Series of Electron Acceptor Materials Driven by Conformational Disorder.

Control over the populations of singlet and triplet excitons is key to organic semiconductor technologies. In different contexts, triplets can represent an energy loss pathway that must be managed (i.e., solar cells, light-emitting diodes, and lasers) or provide avenues to improve energy conversion (i.e., photon upconversion and multiplication systems). A key consideration in the interplay of singlet and triplet exciton populations in these systems is the rate of intersystem crossing (ISC). In this work, we design, measure, and model a series of new electron acceptor molecules and analyze them using a combination of ultrafast transient absorption and ultrafast broadband photoluminescence spectroscopies. We demonstrate that intramolecular triplet formation occurs within several hundred picoseconds in solution and is accelerated considerably in the solid state. Importantly, ISC occurs with sufficient rapidity to compete with charge formation in modern organic solar cells, implicating triplets in intrinsic exciton loss channels in addition to charge recombination. Density functional theory calculations reveal that ISC occurs in triplet excited states characterized by local deviations from orbital π-symmetry associated with rotationally flexible thiophene rings. In disordered films, structural distortions, therefore, result in significant increases in spin-orbit coupling, enabling rapid ISC. We demonstrate the generality of this proposal in an oligothiophene model system where ISC is symmetry-forbidden and show that conformational disorder introduced by the formation of a solvent glass accelerates ISC, outweighing the lower temperature and increased viscosity. This proposal sheds light on the factors responsible for facile ISC and provides a simple framework for molecular control over spin states.

Variants in AQP11 may result in autosomal recessive bilateral cystic renal dysgenesis.

Congenital renal cystic dysplasia is a rare disease that occurs in approximately 1 in 4000 children and is often discovered in the antenatal period by ultrasound. It is commonly associated with oligohydramnios in utero and/or renal insufficiency or failure in the postnatal period. Aquaporins are membrane proteins that serve as transport channels in the transfer of water or small solutes across cell membranes. They play a role in the development of renal cysts. Aquaporin 11 (AQP11) deficient mice develop polycystic kidney disease in utero due to disruption of polycystin-1. Here we describe a case of bilateral cystic kidney disease in a patient with novel compound heterozygous variants in AQP11: c.780G>T (p. Trp260Cys) and c.472C>T (p.Pro158Ser) (NM_173039.2) identified by whole genome sequencing. These findings suggest, for the first time, the potential role of AQP11 in congenital renal cystic dysplasia.

Tuneable emission in single molecule dyads mediated by a charge transfer state.

The demand for fluorescent organic dyes across a broad range of applications has led to investigation into tuneable emission dyes. The tuneable nature of these dyes makes them desirable for applications in a variety of fields, including organic light-emitting diodes (OLEDs), optical sensing devices, and fluorescence imaging. In recent investigations, there have only been a handful of mechanisms used to tune emission. Herein, we present four novel perylene-acene dyads that undergo solvent tuneable emission, and propose a novel mechanism for this tuneability based on the presence of a charge transfer state. These dyes were shown to reach photoluminescence quantum efficiencies (PLQEs) as high as 45%, depending on the solvent, showing the ability for this mechanism to be used to access higher PLQE tuneable emission.

Fire mosaics and habitat choice in nomadic foragers.

In the mid-1950s Western Desert of Australia, Aboriginal populations were in decline as families left for ration depots, cattle stations, and mission settlements. In the context of reduced population density, an ideal free-distribution model predicts landscape use should contract to the most productive habitats, and people should avoid areas that show more signs of extensive prior use. However, ecological or social facilitation due to Allee effects (positive density dependence) would predict that the intensity of past habitat use should correlate positively with habitat use. We analyzed fire footprints and fire mosaics from the accumulation of several years of landscape use visible on a 35,300-km2 mosaic of aerial photographs covering much of contemporary Indigenous Martu Native Title Lands imaged between May and August 1953. Structural equation modeling revealed that, consistent with an Allee ideal free distribution, there was a positive relationship between the extent of fire mosaics and the intensity of recent use, and this was consistent across habitats regardless of their quality. Fire mosaics build up in regions with low cost of access to water, high intrinsic food availability, and good access to trade opportunities; these mosaics (constrained by water access during the winter) then draw people back in subsequent years or seasons, largely independent of intrinsic habitat quality. Our results suggest that the positive feedback effects of landscape burning can substantially change the way people value landscapes, affecting mobility and settlement by increasing sedentism and local population density.

Luminescent light diffuser for diffuse lighting applications.

The lighting industry currently accounts for a significant proportion of all energy demand. Luminescent white lighting is often impure, inefficient, expensive, and detrimentally emits as a point source, meaning the light is emitted from a focused point. A luminescent light diffuser offers the potential to create a spatially broad lighting fixture. We developed a luminescent light diffuser consisting of three commercially available luminescent dye species (rhodamine 6G, fluorescein, 7-diethylamino-4-methylcoumarin) dispersed within a polymer matrix (polyvinyl alcohol), or commercial paint, and coated on a planar waveguide. A Light-emitting diode (LED) (385 nm) is directed into the waveguide which excites the luminescent species, coating the panel, creating a device that emits spatially broad pure white light. As the emission depends on escape cone emission from the waveguide, the device's emission was found to depend highly on the coating film quality and components. We present two systems: a small 40 mm × 40 mm prototype, made using standard water-soluble polymer (polyvinyl alcohol), to study the underlying operational principles, and a 100 mm × 100 mm device with optimized efficiency fabricated with a clear commercial paint. By doping the polymer matrix with scattering silica microparticles we achieved a maximum photon outcoupling efficiency of 78%, whilst maintaining colour purity with an increased device size of more than 300 times (compared with the input LED). This work shows that it is possible to construct an inexpensive and spatially broad lighting source, whilst maintaining colour purity at a low cost.

Testing for crowd out in social nudges: Evidence from a natural field experiment in the market for electricity.

This study considers the response of household electricity consumption to social nudges during peak load events. Our investigation considers two social nudges. The first targets conservation during peak load events, while the second promotes aggregate conservation. Using data from a natural field experiment with 42,100 households, we find that both social nudges reduce peak load electricity consumption by 2 to 4% when implemented in isolation and by nearly 7% when implemented in combination. These findings suggest an important role for social nudges in the regulation of electricity markets and a limited role for crowd out effects.

Effects of Flywheel Training With Eccentric Overload on Standing Balance, Mobility, Physical Function, Muscle Thickness, and Muscle Quality in Older Adults.

ABSTRACT: Hill, MW, Roberts, M, Price, MJ, and Kay, AD. Effects of flywheel training with eccentric overload on standing balance, mobility, physical function, muscle thickness, and muscle quality in older adults. J Strength Cond Res 36(11): 3190-3199, 2022-This study investigated the effects of a 6-week eccentric overload flywheel training program on vastus lateralis (VL) and gastrocnemius medialis (GM) muscle thickness and muscle quality (echo intensity), mobility (Timed Up and Go [TUG]), physical function (sit-to-stand), and balance (postural sway) performance. Nineteen subjects were assigned to either a flywheel training group ( n = 11, age = 66.4 ± 5.2 years) or a control group ( n = 8, age = 65.9 ± 3.8 years). The flywheel group underwent twice weekly squat and calf raise exercises for 6 weeks with outcome measures assessed before and after training or a time-matched control period. Throughout the training, subjects were instructed to contract as fast as possible with maximal effort during the concentric phase and to maximally resist the pull during the eccentric phase. The alpha value was a priori set at p < 0.05. Statistically significant ( p < 0.05) mean ( SD ) increases in right and left VL (7.6-9.6 ± 7.7-9.8%) and GM (8.6-8.7 ± 6.4-11.5%) muscle thickness and a reduction in VL (10.2-11.3 ± 5.9-7.9%) and GM (11.7-11.9 ± 5.6-9.6%) echo intensity were accompanied by faster TUG time (13.7 ± 7.0%) improved sit-to-stand performance (17.8-23.5 ± 7.6 - 13.4%) and reduced postural sway (29.7-42.3 ± 13.2-24.2%) after 6 weeks of flywheel training. There were no differences in any outcome measures between the treatment and control group at baseline ( p > 0.05). Overall, we observed substantial gains in muscle thickness and muscle quality, in addition to enhanced physical function, balance, and mobility performance among older adults after flywheel training, which may have important implications for preserving the functional capacity of older adults.

Human behavioral ecology and niche construction.

We examine the relationship between niche construction theory (NCT) and human behavioral ecology (HBE), two branches of evolutionary science that are important sources of theory in archeology. We distinguish between formal models of niche construction as an evolutionary process, and uses of niche construction to refer to a kind of human behavior. Formal models from NCT examine how environmental modification can change the selection pressures that organisms face. In contrast, formal models from HBE predict behavior assuming people behave adaptively in their local setting, and can be used to predict when and why people engage in niche construction. We emphasize that HBE as a field is much broader than foraging theory and can incorporate social and cultural influences on decision-making. We demonstrate how these approaches can be formally incorporated in a multi-inheritance framework for evolutionary research, and argue that archeologists can best contribute to evolutionary theory by building and testing models that flexibly incorporate HBE and NCT elements.