Conductance-Matrix Symmetries of a Three-Terminal Hybrid Device.

We present conductance-matrix measurements of a three-terminal superconductor-semiconductor hybrid device consisting of two normal leads and one superconducting lead. Using a symmetry decomposition of the conductance, we find that antisymmetric components of pairs of local and nonlocal conductances qualitatively match at energies below the superconducting gap, and we compare this finding with symmetry relations based on a noninteracting scattering matrix approach. Further, the local charge character of Andreev bound states is extracted from the symmetry-decomposed conductance data and is found to be similar at both ends of the device and tunable with gate voltage. Finally, we measure the conductance matrix as a function of magnetic field and identify correlated splittings in low-energy features, demonstrating how conductance-matrix measurements can complement traditional single-probe measurements in the search for Majorana zero modes.

Trichorionic and dichorionic triplet pregnancies at 10-14 weeks: outcome after embryo reduction compared to expectant management.

OBJECTIVE: To compare the outcome of trichorionic triplet (TCT) and dichorionic triplet (DCT) pregnancies managed expectantly and those with embryo reduction (ER) at 10-14 weeks to twins or singletons. METHODS: This was a retrospective study of triplet pregnancies with 3 live fetuses managed expectantly or by ER. Data were combined with the results of previous studies that used similar entry criteria and outcome measures. The management options were compared for rates of miscarriage and preterm birth <33 weeks. RESULTS: In TCTs managed expectantly (n = 358), the rates of miscarriage and preterm birth were 3.1 and 35.1%. Compared to the expectantly managed TCTs, the rate of miscarriage was higher and preterm birth lower in TCTs with ER to 2 fetuses (n = 833, 7.3 and 13.1%, respectively) and TCTs with ER to 1 fetus (n = 78, 11.5 and 8.7%). In DCTs managed expectantly (n = 136), the rates of miscarriage and preterm birth were 8.8 and 46.0%. In DCTs with ER to 2 fetuses (n = 15) or ER to 1 fetus (n = 42), there was a non-significant increase in miscarriage (13.3 and 16.7%, respectively) and decrease in preterm birth (23.1 and 8%, respectively). CONCLUSIONS: In TCT and DCT pregnancies, ER increases the rate of miscarriage but reduces the rate of preterm birth.

Superconductivity from a melted insulator in Josephson junction arrays.

Arrays of Josephson junctions are governed by a competition between superconductivity and repulsive Coulomb interactions, and are expected to exhibit diverging low-temperature resistance when interactions exceed a critical level. Here we report a study of the transport and microwave response of Josephson arrays with interactions exceeding this level. Contrary to expectations, we observe that the array resistance drops dramatically as the temperature is decreased-reminiscent of superconducting behaviour-and then saturates at low temperature. Applying a magnetic field, we eventually observe a transition to a highly resistive regime. These observations can be understood within a theoretical picture that accounts for the effect of thermal fluctuations on the insulating phase. On the basis of the agreement between experiment and theory, we suggest that apparent superconductivity in our Josephson arrays arises from melting the zero-temperature insulator.

Valorization and extraction of cellulose nanocrystals from North African grass: Ampelodesmos mauritanicus (Diss).

The aim of this research activity was based on the revalorization of Amplodesmos mauritanicus (Diss), an African grass largely presented in the Algerian territory. Diss stems were selected as native botanic material for the extraction of cellulose nanocrystals (CNC). Two different pretreatment steps were carried out to extract CNC from Amplodesmos mauritanicus stems and the following acidic hydrolysis procedure allowed to extract/obtain cellulose nanocrystals in aqueous suspension. The effect of the two different pretreatments, based essentially on chemical or enzymatic treatments, were deeply investigated and the properties compared. Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) were considered for the characterization of raw material, chemical or enzymatic treated Diss stems and CNC extracted from both chemical and enzymatic pretreated cellulose.

Polyvinyl alcohol/chitosan hydrogels with enhanced antioxidant and antibacterial properties induced by lignin nanoparticles.

Polyvinyl alcohol/chitosan (PVA/Ch) hydrogels containing 1 and 3wt% of lignin nanoparticles (LNPs) were prepared through a freezing-thaw procedure. Results from microstructural, thermal and mechanical characterization of LNPs based PVA/Ch demonstrated that the lowest amount of LNPs (1wt%) was beneficial, whereas the presence of agglomerates at higher LNP content limited the effect. Moreover, a different swelling behaviour was observed for hydrogels containing LNPs with respect of PVA/Ch, due to the formation of a porous honeycomb-like structure. A synergic effect of Ch and LNPs was revealed in terms of antioxidative response by DPPH (1,1-Diphenyl-2-picryl-hydrazyl) activity of migrated substances, whereas results from antimicrobial tests confirmed LNPs as effective against Gram negative bacteria (E. coli) when compared to Gram positive (S.aureus and S. epidermidis) strains. The obtained results suggested the possible use of produced PVA/Ch hydrogels incorporating LNPs in many different sectors, such as drug delivery, food packaging, wound dressing.

Cellulose nanocrystals as templates for cetyltrimethylammonium bromide mediated synthesis of Ag nanoparticles and their novel use in PLA films.

In the present paper, we reported how cellulose nanocrystals (CNC) from microcrystalline cellulose have the capacity to assist in the synthesis of metallic nanoparticles chains. A cationic surfactant, cetyltrimethylammonium bromide (CTAB), was used as modifier for CNC surface. Silver nanoparticles were synthesized on CNC, and nanoparticle density and size were optimized by varying concentrations of nitrate and reducing agents, and the reduction time. The experimental conditions were optimized for the synthesis and the resulting Ag grafted CNC (Ag-g-CNC) were characterized by means of TGA, SEM, FTIR and XRD, and then introduced in PLA matrix. PLA nanocomposite containing silver grafted cellulose nanocrystals (PLA/0.5Ag-g-1CNC) was characterized by optical and thermal analyses and the obtained data were compared with results from PLA nanocomposites containing 1% wt. of CNC (PLA/1CNC), 0.5% wt. of silver nanoparticles (PLA/0.5Ag) and hybrid system containing CNC and silver in the same amount (PLA/1CNC/0.5Ag). The results demonstrated that grafting of silver nanoparticles on CNC positively affected the thermal degradation process and cold crystallization processes of PLA matrix. Finally, the antibacterial activity of the different systems was studied at various incubation times and temperatures, showing the best performance for PLA/1CNC/0.5Ag based nanocomposite.

Revalorization of sunflower stalks as novel sources of cellulose nanofibrils and nanocrystals and their effect on wheat gluten bionanocomposite properties.

Novel gluten based bionanocomposites reinforced with cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC) extracted from sunflower stalks by respectively a steam explosion treatment and a hydrolysis procedure, were prepared by casting/evaporation. The extracted cellulose nanomaterials, both CNC and CNF, were embedded in gluten matrix and their effect was investigated. Morphological investigations highlighted that gluten based bionanocomposites showed a homogenous morphology, the absence of visible cellulose nanoreinforcements, and the presence of holes for Gluten_CNF nanocomposites. Gluten_CNF showed a reduction of water vapour permeability coefficients but the values are higher respect to gluten reinforced with CNC. This behaviour could be related to the ability of CNC to increase the tortuous path of gas molecules. Moreover, the results from thermal, mechanical and barrier properties confirmed the strong interactions obtained between CNC and gluten matrix during the process. The study suggested the possibility to re-valorise agricultural wastes with potential applications as reinforcement in polymer matrix bionanocomposites.

Effect of cellulose and lignin on disintegration, antimicrobial and antioxidant properties of PLA active films.

This study reports the effects on antimicrobial, antioxidant, migration and disintegrability activities of ternary nanocomposite films based on poly(lactic acid) incorporating two biobased nanofillers, (cellulose nanocrystals (CNC) and lignin nanoparticles (LNP)), in two different amounts (1 and 3% wt.). Results from antimicrobial tests revealed a capacity to inhibit the Gram negative bacterial growth of Xanthomonas axonopodis pv. vesicatoria and Xanthomonas arboricola pv. pruni along the time, offering innovative opportunities against dangerous bacterial plant pathogens. LNP proved to be highly efficient in antioxidation activity, based on the disappearance of the absorption band at 517nm of the free radical, 2,2-diphenyl-1-picrylhydrazyl (DPPH) upon reduction by an antiradical compound; moreover the combination of LNP and CNC generates a synergistic positive effect in the antioxidation response of PLA ternary films. Furthermore, all the studied formulations showed a disintegrability value up to 90% after 15days of incubation in composting conditions. Migration results showed that the films can be considered suitable for application in food packaging field.

Keratins extracted from Merino wool and Brown Alpaca fibres: thermal, mechanical and biological properties of PLLA based biocomposites.

Keratins extracted from Merino wool (KM) and Brown Alpaca fibres (KA) by sulphitolysis and commercial hydrolyzed keratins (KH) were used as fillers in poly(l-lactic) acid based biocomposites processed by solvent casting in chloroform. Different contents (1 wt.% and 5 wt.%) of keratins were considered and the morphological, thermal, mechanical, chemical and biological behaviours of the developed PLLA biocomposites were investigated. The results confirmed that surface morphologies of biocomposites revealed specific round-like surface topography function of different microsized keratin particles in different weight contents, such as the analysis of bulk morphologies which confirmed a phase adhesion strictly dependent by the keratin source. Transparency and thermal responses were deeply affected by the presence of the different keratins and their interaction with the PLLA matrix. Tensile test results underlined the possibility to modulate the mechanical behaviour of PLLA selecting the keratin type and content in order to influence positively the elastic and/or plastic response. It was demonstrated that surface characteristics of PLLA/KA systems also influenced the bovine serum albumin adsorption, moreover PLLA and PLLA biocomposites based on different kinds of keratins supported the culture of human bone-marrow mesenchymal stem cells, indicating that these biocomposites could be useful materials for medical applications.

Binary PVA bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: part I.

PVA bio-nanocomposites reinforced with cellulose nanocrystals (CNC) extracted from commercial microcrystalline cellulose (MCC) and from two types of natural fibres, Phormium tenax and Flax of the Belinka variety, were produced by solvent casting in water. Morphological, thermal, mechanical and transparency properties were studied while the respective efficiency of the extraction process of CNC from the three sources was evaluated. The effect of CNC types and content on PVA properties and water absorption capacity were also evaluated. Natural fibres offered higher levels of extraction efficiency when compared with MCC hydrolysis yield. Thermal analysis proved that CNC promotes the crystallization of the PVA matrix, while improving its plastic response. It was also clarified that all PVA/CNC systems remain transparent due to CNC dispersion at the nanoscale, while being all saturated after the first 18-24h of water absorption.

Ternary PVA nanocomposites containing cellulose nanocrystals from different sources and silver particles: part II.

Cellulose nanocrystals (CNC) extracted from three different sources, namely flax, phormium, and commercial microcrystalline cellulose (MCC) have been used in a polyvinyl alcohol (PVA) matrix to produce anti-bacterial films using two different amounts of silver nanoparticles (0.1 wt% and 0.5 wt%). In general, CNC confer an effect of reinforcement to PVA film, the best values of stiffness being offered by composites produced using phormium fibres, whilst for strength those produced using flax are slightly superior. This was obtained without inducing any particular modification in transition temperatures and in the thermal degradation patterns. As regards antibacterial properties, systems with CNC from flax proved slightly better than those with CNC from phormium and substantially better than those including commercial MCC. Dynamic mechanical thermal analysis (DMTA) has only been performed on the ternary composite containing 0.1 wt% Ag, which yielded higher values of Young's modulus, and as a whole confirmed the above results.

Hypertrophic donavanosis in a young pregnant woman.

BACKGROUND: Donovanosis is a chronic bacterial illness, progressive and indolent, which normally attacks the skin and mucous membranes in the genital and perigenital regions. CASE: An 18-year-old pregnant female presented with large, hypertrophic lesions in the ano-genital region. HIV serology was negative. Pap smear revealed a CIN 1 associated with HPV infection. Biopsy yielded macrophages laden with Gram-negative Donovan bodies. SUMMARY AND CONCLUSION: A diagnosis of vulvar and perianal donovanosis was reached; the patient decided to terminate the pregnancy and was treated with azithromycin, which led to clinical resolution.