RESUMO
Numerous reported bioinspired osmotic energy conversion systems employing cation-/anion-selective membranes and solutions with different salinity are actually far from the biological counterpart. The iso-osmotic power generator with the specific ionic permselective channels (e.g., K+ or Na+ channels) which just allow specific ions to get across and iso-osmotic solutions still remain challenges. Inspired by nature, we report a bioinspired K+ -channel by employing a K+ selective ligand, 1,1,1-tris{[(2'-benzylaminoformyl)phenoxy]methyl}ethane (BMP) and graphene oxide membrane. Specifically, the K+ and Na+ selectivity of the prepared system could reach up to ≈17.8, and the molecular dynamics simulation revealed that the excellent permselectivity of K+ mainly stemmed from the formed suitable channel size. Thus, we assembled the K+ -selective iso-osmotic power generator (KSIPG) with the power density up to ≈15.1â mW/m2 between equal concentration solutions, which is higher than traditional charge-selective osmotic power generator (CSOPG). The proposed strategy has well shown the realizable approach to construct single-ion selective channels-based highly efficient iso-osmotic energy conversion systems and would surely inspire new applications in other fields, including self-powered systems and medical materials, etc.
RESUMO
Biological proton channels play important roles in the delicate metabolism process, and have led to great interest in mimicking selective proton transport. Herein, we designed a bioinspired proton transport membrane by incorporating flexible 14-crown-4 (14C4) units into rigid frameworks of polyimine films by an interfacial Schiff base reaction. The Young's modulus of the membrane reaches about 8.2â GPa. The 14C4 units could grab water, thereby forming hydrogen bond-water networks and acting as jumping sites to lower the energy barrier of proton transport. The molecular chains present a vertical orientation to the membrane, and the ions travel between the quasi-planar molecular sheets. Furthermore, the 14C4 moieties could bond alkali ions through host-guest interactions. Thus, the ion conductance follows H+ â«K+ >Na+ >Li+ , and an ultrahigh selectivity of H+ /Li+ (ca. 215) is obtained. This study provides an effective avenue for developing ion-selective membranes by embedding macrocycle motifs with inherent cavities.
RESUMO
Biological ion channels existing in organisms are critical for many biological processes. Inspired by biological ion channels, the heterogeneous electrospinning nanofiber membranes (HENM) with functional ion channels are constructed by electrospinning technology. The HENM successfully realizes ion-gating effects, which can be used for tunable energy conversions. Introduction of pyridine and carboxylic acid groups into the HENM plays an important role in generating unique and stable ion transport behaviors, in which gates become alternative states of open and close, responding to symmetric/asymmetric pH stimulations. Then we used the HENM to convert osmotic energy into electric energy which reach a maximum value up to 12.34â W m-2 and the output power density of HENM-based system could be regulated by ion-gating effects. The properties of the HENM provide widespread potentials in application of smart nanofluidic devices, energy conversion, and water treatment.
Assuntos
Nanofibras , Nanotecnologia , Transporte de Íons , Canais Iônicos/química , Concentração de Íons de HidrogênioRESUMO
Nanofluidic reverse electrodialysis provides an attractive way to harvest osmotic energy. However, most attention was paid to monotonous membrane structure optimization to promote selective ion transport, while the role of external fields and relevant mechanisms are rarely explored. Here, we demonstrate a Kevlar-toughened tungsten disulfide (WS2 ) composite membrane with bioinspired serosa-mimetic structures as an efficient osmotic energy generator coupling light. As a result, the output power could be up to 16.43â W m-2 under irradiation, outperforming traditional two-dimensional (2D) membranes. Both the experiment and simulation uncover that the generated photothermal and photoelectronic effects could synergistically promote the confined ion transport process. In addition, this membrane also possesses great anti-fouling properties, endowing its practical application. This work paves new avenues for sustainable power generation by coupling solar energy.
RESUMO
Coulombic efficiency (CE) and cycle life of metal anodes (lithium, sodium, zinc) are limited by dendritic growth and side reactions in rechargeable metal batteries. Here, we proposed a concept for constructing an anion concentration gradient (ACG)-assisted solid-electrolyte interphase (SEI) for ultrahigh ionic conductivity on metal anodes, in which the SEI layer is fabricated through an in situ chemical reaction of the sulfonic acid polymer and zinc (Zn) metal. Owing to the driving force of the sulfonate concentration gradient and high bulky sulfonate concentration, a promoted Zn2+ ionic conductivity and inhibited anion diffusion in the SEI layer are realized, resulting in a significant suppression of dendrite growth and side reaction. The presence of ACG-SEI on the Zn metal enables stable Zn plating/stripping over 2000 h at a high current density of 20 mA cm-2 and a capacity of 5 mAh cm-2 in Zn/Zn symmetric cells, and moreover an improved cycling stability is also observed in Zn/MnO2 full cells and Zn/AC supercapacitors. The SEI layer containing anion concentration gradients for stable cycling of a metal anode sheds a new light on the fundamental understanding of cation plating/stripping on metal electrodes and technical advances of rechargeable metal batteries with remarkable performance under practical conditions.
RESUMO
Supramolecular polymers not only possess many advantages of traditional polymers, but also have many unique characteristics. Supramolecular polymers can be constructed by self-assembly of various noncovalent interactions. Host-guest interaction, as one important type of noncovalent interactions, has been widely applied to construct supramolecular polymers. From the perspective of classification of the recognition system motifs, host-guest recognition motifs mainly include crown ether, cyclodextrin, calixarene, cucurbituril, and pillararene-based host-guest recognition pairs. Crown ethers, as the first-generation macrocyclic hosts, have played a very important part in the development of supramolecular chemistry. Due to the easy modification of crown ethers, various crown ether derivatives have been prepared by attaching some functional groups to the edges of crown ethers, which endowed them with some interesting properties and made them ideal candidates for the fabrication of supramolecular polymers. This review gives a review of the preparation of crown ether-based supramolecular polymers (CSPs) and summarizes crown ether-based recognition pairs, organization methods, topological structures, stimuli-responsiveness, and functional characteristics.
Assuntos
Calixarenos , Éteres de Coroa , Ciclodextrinas , Éteres de Coroa/química , Ciclodextrinas/química , Estrutura Molecular , Polímeros/químicaRESUMO
The asymmetric ion transport in the nanoconfined space, similar to that of natural ion channels, has attracted broad interest in sensor, energy conversion, and other related fields. Among these systems, the surface charge plays an important role in regulating ion transport behaviors. Herein, this surface charge-regulated asymmetric ion transport behavior is systematically explored in the nanoconfined space and the influence on the performance of nanofluidic energy conversion system. The ion transport behaviors in the nanoconfined space are classified into pure diffusion, electrical double layer, and the polarization controlled state. The asymmetric solution environment or surface charge distribution induces asymmetric ion transport behavior which is largely controlled by the low concentration side. The ion-selectivity and the energy conversion performance can be effectively enhanced by improving the local apparent surface charge (more active sites and higher charge strength) or introducing a selective layer with dense surface charge on the low concentration side. These material design concepts for asymmetric ion transport are further supported by both simulation and experiment. The results provide a significant comprehension for ion behaviors in nanoconfined space and the development of high-performance energy storage and conversion systems.
RESUMO
To mimic and use the functions of the ion transport system that are central to biological processes, bioinspired ion-selective membranes are developed and show great potential in a variety of fields. However, the practical applications of them are now limited due to low pore density, low conductivity, or scale-up difficulty. Herein, we demonstrate a 2-hydroxyethyl methacrylate phosphate (HEMAP) hydrogel membrane with 3D interconnected nanopores and space charged through simple photopolymerization. The HEMAP hydrogel membrane exhibits high conductance and outstanding ion selectivity, and the membrane-based osmotic power generator shows the excellent output power density up to 5.38 W/m2. Both experimentally and theoretically, the 3D interconnected structure is revealed to play a key role in enhancing charge-governed ion transport and energy conversion. This work highlights the advantages of 3D interconnected nanopores in ion diffusion and shows the potential of our designed hydrogel membrane in osmotic energy conversion, water desalination, and sensors.
Assuntos
Nanoporos , Difusão , Hidrogéis , Transporte de Íons , OsmoseRESUMO
Osmotic energy, obtained through different concentrations of salt solutions, is recognized as a form of a sustainable energy source. In the past years, membranes derived from asymmetric aromatic compounds have attracted attention because of their low cost and high performance in osmotic energy conversion. The membrane formation process, charging state, functional groups, membrane thickness, and the ion-exchange capacity of the membrane could affect the power generation performance. Among asymmetric membranes, a bipolar membrane could largely promote the ion transport. Here, two polymers with the same poly(ether sulfone) main chain but opposite charges were synthesized to prepare bipolar membranes by a nonsolvent-induced phase separation (NIPS) and spin-coating (SC) method. The maximum power density of the bipolar membrane reaches about 6.2â W m-2 under a 50-fold salinity gradient, and this result can serve as a reference for the design of bipolar membranes for osmotic energy conversion systems.
RESUMO
The creation of an artificial solid-state ion pump that mimics the delicate ion transport behaviors of a biological protein-based ion pump is drawing more and more research attention due to its potential applications in energy conversion, biosensor, and desalination. However, the reported bioinspired double-gated ion pump systems are generally very primary and can only realize nonselective ion pumping functions with no directionality and uncontrollable ion gating functions, which are far from their biological counterparts. To make the bioinspired device "smart" in a real sense, the implementation of high-level selectivity and directionality in the ion pumping process, while achieving great controllability in the ion gating process, is a necessity. Here, we developed a bioinspired heterogeneous ion pump membrane by combining block copolymer membrane sacrificial coating and plasma grafting technique. The system has unidirectional selective ion pumping and controllable ion gating properties. The introduction of asymmetric ionic group distribution is the key reason for its novel transport behaviors. Such a heterogeneous ion pump could not only provide a basic platform that potentially sparks further efforts to simulate the smart ion transport processes in living bodies but also promote the application of artificial nanofluidic devices in energy conversion, water treatment, and biosensing.
Assuntos
Materiais Biomiméticos/química , Bombas de Íon/química , Membranas Artificiais , Nanoestruturas/química , Polímeros/química , Técnicas Biossensoriais , Transporte de Íons , Nanoestruturas/ultraestrutura , NanotecnologiaRESUMO
The existence of heavy ions, such as Pb2+, in the external environment is potentially hazardous as these can be highly toxic to the human body. Inspired by the highly efficient ability of biological ion channels to recognize the metal ion, much effort has been devoted to investigating biomimetic ionic gates based on engineered solid-state conical nanopores/nanochannels. However, the reported system generally displays relatively poor functionality and low stability due to the limited functional region. This article describes an ionic gate with enhanced stability and improved sensitivity based on an emerging advanced funnel-shaped nanochannel system. The ionic gate is developed by anchoring the Pb2+ ion-responsive functional molecules, 4'-aminobenzo-18-crown-6 (4-AB18C6), onto the inner surface of a funnel-shaped polyethylene terephthalate (PET) nanochannel. The system can selectively recognize Pb2+ with an ultra-low concentration of down to approximately 10-15 M and displays excellent stability. The Pb2+ ions will form positively charged complexes through specific association with 4-AB18C6, which would screen the negative charge existing on the channel walls, resulting in a decreased ionic current and also an "OFF state". Since the ability of EDTA to associate with Pb2+ is much stronger than that of 4-AB18C6, the nanochannel can also achieve reversible switching upon the alternating addition of Pb2+ ions and EDTA. The switching behaviors of the system were reflected by the good reproducibility of the tunable rectifying effect. The stability of the conical and funnel-shaped nanochannels is also compared using current scanning under constant voltage. The results have shown that the stability of the funnel-shaped nanochannel is much better than that of the conical nanochannel, and this can be ascribed to its much longer critical region. Consequently, the funnel-shaped nanochannels with enhanced stability and improved sensitivity can potentially be applied in ion transportation, sensors, drug release, and energy conversion.
RESUMO
Supramolecular copolymers can not only enrich the diversity of the polymer backbone but also exhibit certain special and improved properties compared with supramolecular homopolymers. However, the synthesis procedure of supramolecular copolymers is relatively complicated and time-consuming. Herein, a simple transformation from an AB2 -based supramolecular hyperbranched homopolymer to an AB2 +CD2 -based supramolecular hyperbranched alternating copolymer by the "competitive self-sorting" strategy is reported. After adding CD2 monomer, which bears a competitive neutral guest moiety (TAPN) and two receptive benzo-21-crown-7 host moieties (B21C7), to the as-prepared AB2 -type supramolecular hyperbranched homopolymer constructed by the self-assembly of dialkylammonium salt (DAAS, A group)-functionalized pillar[5]arene (MeP5, B groups) monomers, the initial homopolymer structure is disrupted and then reassemble into a new supramolecular hyperbranched alternating copolymer based on the competitive self-sorting interaction between MeP5-TAPN and B21C7-DAAS. This study supplies a convenient approach to directly transform supramolecular homopolymers into supramolecular copolymers.
Assuntos
Substâncias Macromoleculares/química , Polímeros/química , Substâncias Macromoleculares/síntese química , Estrutura Molecular , Polímeros/síntese químicaRESUMO
Biological ion channels exhibit high selectivity and permeability of ions because of their asymmetrical pore structures and surface chemistries. Here, we demonstrate a biomimetic nanofluidic channel (BNC) with an asymmetrical structure and glycyl-L-proline (GLP) -functionalization for ultrafast, selective, and unidirectional Dy3+ extraction over other lanthanide (Ln3+) ions with very similar electronic configurations. The selective extraction mainly depends on the amplified chemical affinity differences between the Ln3+ ions and GLPs in nanoconfinement. In particular, the conductivities of Ln3+ ions across the BNC even reach up to two orders of magnitude higher than in a bulk solution, and a high Dy3+/Nd3+ selectivity of approximately 60 could be achieved. The designed BNC can effectively extract Dy3+ ions with ultralow concentrations and thereby purify Nd3+ ions to an ultimate content of 99.8 wt.%, which contribute to the recycling of rare earth resources and environmental protection. Theoretical simulations reveal that the BNC preferentially binds to Dy3+ ion due to its highest affinity among Ln3+ ions in nanoconfinement, which attributes to the coupling of ion radius and coordination matching. These findings suggest that BNC-based ion selectivity system provides alternative routes to achieving highly efficient lanthanide separation.
Assuntos
Disprósio , Disprósio/química , Íons , Biomimética/métodos , Nanotecnologia/métodos , Neodímio/químicaRESUMO
Oceans and salt lakes contain vast amounts of uranium. Uranium recovery from natural water not only copes with radioactive pollution in water but also can sustain the fuel supply for nuclear power. The adsorption-assisted electrochemical processes offer a promising route for efficient uranium extraction. However, competitive hydrogen evolution greatly reduces the extraction capacity and the stability of electrode materials with electrocatalytic activity. In this study, we got inspiration from the biomineralisation of marine bacteria under high salinity and biomimetically regulated the electrochemical process to avoid the undesired deposition of metal hydroxides. The uranium uptake capacity can be increased by more than 20% without extra energy input. In natural seawater, the designed membrane electrode exhibits an impressive extraction capacity of 48.04 mg-U per g-COF within 21 days (2.29 mg-U per g-COF per day). Furthermore, in salt lake brine with much higher salinity, the membrane can extract as much uranium as 75.72 mg-U per g-COF after 32 days (2.37 mg-U per g-COF per day). This study provides a general basis for the performance optimisation of uranium capture electrodes, which is beneficial for sustainable access to nuclear energy sources from natural water systems.
RESUMO
Nanofluidic membranes offer exceptional promise for osmotic energy conversion, but the challenge of balancing ionic selectivity and permeability persists. Here, we present a bionic nanofluidic system based on two-dimensional (2D) copper tetra-(4-carboxyphenyl) porphyrin framework (Cu-TCPP). The inherent nanoporous structure and horizontal interlayer channels endow the Cu-TCPP membrane with ultrahigh ion permeability and allow for a power density of 16.64 W m-2, surpassing state of-the-art nanochannel membranes. Moreover, leveraging the photo-thermal property of Cu-TCPP, light-controlled ion active transport is realized even under natural sunlight. By combining solar energy with salinity gradient, the driving force for ion transport is reinforced, leading to further improvements in energy conversion performance. Notably, light could even eliminate the need for salinity gradient, achieving a power density of 0.82 W m-2 in a symmetric solution system. Our work introduces a new perspective on developing advanced membranes for solar/ionic energy conversion and extends the concept of salinity energy to a notion of ionic energy.
RESUMO
With the rapid development of the lithium ion battery industry, emerging lithium (Li) enrichment in nature has attracted ever-growing attention due to the biotoxicity of high Li levels. To date, fast lithium ion (Li+) detection remains urgent but is limited by the selectivity, sensitivity, and stability of conventional technologies based on passive response processes. In nature, archaeal plasma membrane ion exchangers (NCLX_Mj) exhibit Li+-gated multi/monovalent ion transport behavior, activated by different stimuli. Inspired by NCLX_Mj, we design a pH-controlled biomimetic Li+-responsive solid-state nanochannel system for on-demand Li+ detection using 2-(2-hydroxyphenyl)benzoxazole (HPBO) units as Li+ recognition groups. Pristine HPBO is not reactive to Li+, whereas negatively charged HPBO enables specific Li+ coordination under alkaline conditions to decrease the ion exchange capacity of nanochannels. On-demand Li+ detection is achieved by monitoring the decline in currents, thereby ensuring precise and stable Li+ recognition (>0.1 mM) in the toxic range of Li+ concentration (>1.5 mM) for human beings. This work provides a new approach to constructing Li+ detection nanodevices and has potential for applications of Li-related industries and medical services.
RESUMO
Layered two-dimensional (2D) materials with interlayer channels at the nanometer scale offer an ideal platform to control ion transport behaviors, including high-precision separation, ultrafast diffusion, and tunable permeation flux, which show great potential for energy conversion and storage, water treatment, catalysis, biosynthesis, and sensing. Recent advances in controlling the structure and functionality of 2D nanofluidic channels sustainably open doors for more revolutionary applications. In this Perspective, we first present a brief introduction to the fundamental mechanisms for ion transport in 2D nanofluidic channels and an overview of state-of-the-art assembly technologies of nanochannel membranes. We then point out new avenues for developing advanced nanofluidics, combining molecular-level cross-linking, and surface modification in nanoconfinement. Finally, we outline the potential applications of these 2D nanofluidic channel membranes and their technical challenges that need to be addressed to afford for practical applications.
RESUMO
A biomimetic hierarchical membrane consisting of ZIF-8 and MXene with controllable morphology could be fabricated by the facile electrochemical deposition method, well-realizing Li+/Mg2+ sieving. This membrane could work stably in real brine with perm-selectivity of Li+/Mg2+ up to 47.4.
RESUMO
The global carbon neutrality strategy brings a wave of rechargeable lithium-ion batteries technique development and induces an ever-growing consumption and demand for lithium (Li). Among all the Li exploitation, extracting Li from spent LIBs would be a strategic and perspective approach, especially with the low energy consumption and eco-friendly membrane separation method. However, current membrane separation systems mainly focus on monotonous membrane design and structure optimization, and rarely further consider the coordination of inherent structure and applied external field, resulting in limited ion transport. Here, we propose a heterogeneous nanofluidic membrane as a platform for coupling multi-external fields (i.e., light-induced heat, electrical, and concentration gradient fields) to construct the multi-field-coupled synergistic ion transport system (MSITS) for Li-ion extraction from spent LIBs. The Li flux of the MSITS reaches 367.4 mmol m-2 h-1, even higher than the sum flux of those applied individual fields, reflecting synergistic enhancement for ion transport of the multi-field-coupled effect. Benefiting from the adaptation of membrane structure and multi-external fields, the proposed system exhibits ultrahigh selectivity with a Li+/Co2+ factor of 216,412, outperforming previous reports. MSITS based on nanofluidic membrane proves to be a promising ion transport strategy, as it could accelerate ion transmembrane transport and alleviate the ion concentration polarization effect. This work demonstrated a collaborative system equipped with an optimized membrane for high-efficient Li extraction, providing an expanded strategy to investigate the other membrane-based applications of their common similarities in core concepts.
RESUMO
Ion-selective membranes act as the core components in osmotic energy harvesting, but remain with deficiencies such as low ion selectivity and a tendency to swell. 2D nanofluidic membranes as competitive candidates are still subjected to limited mass transport brought by insufficient wetting and poor stability in water. Here, an ionic-liquid-infused graphene oxide (GO@IL) membrane with ultrafast ion transport ability is reported, and how the confined ionic liquid mediates selective cation diffusion is revealed. The infusion of ionic liquids endows the 2D membrane with excellent mechanical strength, anti-swelling properties, and good stability in aqueous electrolytes. Importantly, immiscible ionic liquids also provide a medium, allowing partial dehydration for ultrafast ion transport. Through molecular dynamics simulation and finite element modeling, that GO nanosheets induce ionic liquids to rearrange, bringing in additional space charges, which can be coupled with GO synergistically, is proved. By mixing 0.5/0.01 m NaCl solution, the power density can achieve a record value of ≈6.7 W m-2 , outperforming state-of-art GO-based membranes. This work opens up a new route for boosting nanofluidic energy conversion because of the diversity of the ILs and 2D materials.