Energy-dispersive X-ray absorption spectroscopy at LNLS: investigation on strongly correlated metal oxides.

An energy-dispersive X-ray absorption spectroscopy beamline mainly dedicated to X-ray magnetic circular dichroism (XMCD) and material science under extreme conditions has been implemented in a bending-magnet port at the Brazilian Synchrotron Light Laboratory. Here the beamline technical characteristics are described, including the most important aspects of the mechanics, optical elements and detection set-up. The beamline performance is then illustrated through two case studies on strongly correlated transition metal oxides: an XMCD insight into the modifications of the magnetic properties of Cr-doped manganites and the structural deformation in nickel perovskites under high applied pressure.

Epitaxial growth and structure of cobalt ferrite thin films with large inversion parameter on Ag(001).

Cobalt ferrite ultrathin films with the inverse spinel structure are among the best candidates for spin filtering at room temperature. High-quality epitaxial CoFe2O4 films about 4 nm thick have been fabricated on Ag(001) following a three-step method: an ultrathin metallic CoFe2 alloy was first grown in coherent epitaxy on the substrate and then treated twice with O2, first at room temperature and then during annealing. The epitaxial orientation and the surface, interface and film structure were resolved using a combination of low-energy electron diffraction, scanning tunnelling microscopy, Auger electron spectroscopy and in situ grazing-incidence X-ray diffraction. A slight tetragonal distortion was observed, which should drive the easy magnetization axis in-plane due to the large magneto-elastic coupling of such a material. The so-called inversion parameter, i.e. the Co fraction occupying octahedral sites in the ferrite spinel structure, is a key element for its spin-dependent electronic gap. It was obtained through in situ resonant X-ray diffraction measurements collected at both the Co and Fe K edges. The data analysis was performed using FDMNES, an ab initio program already extensively used to simulate X-ray absorption spectroscopy, and shows that the Co ions are predominantly located on octahedral sites with an inversion parameter of 0.88 (5). Ex situ X-ray photoelectron spectroscopy gives an estimation in accordance with the values obtained through diffraction analysis.

Simulation of Surface Resonant X-ray Diffraction.

We present an ab initio numerical tool to simulate surface resonant X-ray diffraction experiments. The crystal truncation rods and the spectra around a given X-ray absorption edge are calculated at any position of the reciprocal space. Density functional theory is used to determine the resonant scattering factor of an atom within its local environment and to calculate the diffraction peak intensities for surfaces covered with a thin film or with one or several adsorbed layers. Besides the sample geometry, the collected data also depend on several parameters, such as beam polarization and incidence and exit angles. In order to account for these factors, a numerical diffractometer mimicking the experimental operation modes has been created. Finally two case studies are presented in order to compare our simulations with experimental spectra: (i) a magnetite thin film deposited on a silver substrate and (ii) an electrochemical interface consisting of bromine atoms adsorbed on copper.

Self-organized ultrathin FePt nanowires produced by glancing-angle ion-beam codeposition on rippled alumina surfaces.

Ultradense macroscopic arrays of ferromagnetic alloy nanowires exhibit unique properties that make them attractive both for basic physics studies and for prospective nanodevice applications in various areas. We report here on the production of self-organized equiatomic FePt nanowires produced by glancing-angle ion-beam codeposition on alumina nanoripple patterns at room temperature and subsequent annealing at 600 °C. This study demonstrates that periodically aligned FePt nanowires with tunable size (∼10-20 nm width and ∼0.5-10 nm height) can be successfully grown as a consequence of shadowing effects and low mobility of Fe and Pt on the rippled alumina surface. Moreover, the structure and magnetic properties of the FePt nanowires, which undergo a phase transition from a disordered A1 (soft) structure to a partially ordered L10 (hard) structure, can be modified upon annealing. We show that this behavior can be further exploited to change the effective uniaxial anisotropy of the system, which is determined by a strong interplay between the shape and magnetocrystalline anisotropies of the nanowires.

Strain driven monoclinic distortion of ultrathin CoO films in the exchange-coupled CoO/FePt/Pt(0 0 1) system.

The structure and strain of ultrathin CoO films grown on a Pt(0 0 1) substrate and on a ferromagnetic FePt pseudomorphic layer on Pt(0 0 1) have been determined with in situ and real time surface x-ray diffraction. The films grow epitaxially on both surfaces with an in-plane hexagonal pattern that yields a pseudo-cubic CoO(1 1 1) surface. A refined x-ray diffraction analysis reveals a slight monoclinic distortion at RT induced by the anisotropic stress at the interface. The tetragonal contribution to the distortion results in a ratio [Formula: see text], opposite to that found in the low temperature bulk CoO phase. This distortion leads to a stable Co(2+) spin configuration within the plane of the film.

Linear and circularly polarized light to study anisotropy and resonant scattering in magnetic thin films.

The remarkable polarization properties of synchrotron light have lead to the advent of modern synchrotron-related spectroscopic studies with angular and/or magnetic selectivity. Here an overview is given of the prominent aspects of the polarization of the light delivered by a bending magnet, and some dichroic properties in X-ray absorption spectroscopy (XAS). Two studies developed at the Brazilian Synchrotron Light Laboratory are then reported, exemplifying the profit gained using linear and circular polarization of X-rays for the study of magnetic thin films and multilayers. Angle-resolved XAS was used in strained manganite thin films to certify a model of local distortion limited within the MnO6 polyhedron. A pioneering experience of X-ray magnetic scattering at grazing incidence associated with dispersive XAS in a Co/Gd multilayer draws new perspectives for magnetic studies in thin films and multilayers under atmospheric conditions in the hard X-ray range.