Performance Comparison of Different Flat Plate Solar Collectors by Means of the Entropy Generation Rate Using Computational Fluid Dynamics.

In this work, a numerical analysis of three different flat plate solar collectors was conducted using their entropy generation rates. Specifically, the Computational Fluid Dynamics (CFD) technique was used to compare the detailed performance of conventional and zigzag tube geometries of flat plate solar collectors (FPCs) in terms of their entropy generation rates. The effects of fluid viscosity, heat transfer, and heat loss of the flat plate solar collectors were considered for the local and global entropy generation rate analyses. Variations on the inlet volumetric flow rate of the FPCs from 1.0 to 9.0 L/min were simulated under the average solar radiation for one year in the state of Guanajuato, Mexico. The results illustrate and discuss the temperatures, pressures, and global entropy generation rates for volumetric flow variations. The velocity, temperature, and pressure distributions and the maps of the local entropy generation rates inside the collectors are presented and analyzed for the case with a flow rate of 3.0 L/min. These results demonstrate that the zigzag geometries achieved higher outlet temperatures and greater entropy generation rates than the conventional geometry for all the volumetric flow rates considered.

Synthesis of zeolite membranes on calcium silicate support and their bioactive response.

The synthesis of calcium silicate supported zeolite membrane was carried out by second growth method. The chemical nature of the functionalizing agent on the formation of homogenous zeolite membrane was evaluated. One monomer and two cationic polymers were used: 3-aminopropyltriethoxysilane (APS), polyethylenimine (PEI) and polydiallyldimethylammonium chloride (PDDA). The support was subjected to chemical functionalization and then it was rubbed with zeolite crystals. The W zeolite was used as zeolite seed in two different Si/Al ratios. The functionalized and rubbed supports were submitted to hydrothermal treatment at 150 °C for 48 h. The bioactivity of the homogeneous zeolite membranes was evaluated by the biomimetic method through the membranes soaking in a simulated body fluid (SBF) at 37 °C for 21 days. Two immersion methods were evaluated. The products were characterized by XRD and SEM techniques. The results indicated that the supported functionalization with PDDA and the Si/Al ratio (higher than 1.8) of zeolite enhanced the interaction between the support and the zeolite precursor enhancing the formation of homogeneous zeolite membrane on the surface. The presence of the functional groups of PDDA on the membrane was detected by FTIR. After immersion in SBF, the zeolite membrane was stable and led to the formation of Ca-P layer on its surface. The re-immersion method led to the formation of richer Ca/P layer (1.36). These findings allowed generating a zeolite membrane with combined properties of calcium silicate and the controllable porosity of zeolitic material making it potentially useful for bone regeneration and drug releasing.