Oxidative Coupling of Hydroquinone Derivatives with Olefins to Dihydrobenzofurans.

Dihydrobenzofuran is an important skeleton for bioactive compounds and natural products. Hydroquinones can be easily modified into substituted hydroquinones, which effectively undergo oxidation to produce the corresponding benzoquinone derivatives. Benzoquinones are reactive electrophiles that are frequently utilized in coupling with olefins to dihydrobenzofurans. Herein, we report the one-pot oxidative coupling of hydroquinones bearing an electron-withdrawing group at the C2 position with olefins to dihydrobenzofurans in the presence of the Lewis acidic FeCl3 and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) oxidant. Furthermore, this method was applied to the oxidative coupling of N-electron-withdrawing group-substituted 4-aminophenol.

Oxidative Functionalization of Catechol Derivatives Substituted with Electron-Withdrawing Groups.

Catechols possessing electron-withdrawing groups at the C3 position effectively underwent oxidative functionalization at the C4 position in the presence of phenyliodine(III) diacetate (PIDA) and heteroarene nucleophiles (e.g., indole, indazole, and benzotriazole) to produce the corresponding biaryl products. The PIDA-mediated oxidation of catechol derivatives afforded the ortho-benzoquinone intermediate, which subsequently underwent regioselective nucleophilic addition to the α,ß-unsaturated carbonyl moiety of ortho-benzoquinone using indole, indazole, and benzotriazole to give 4-substituted catechol derivatives in a one-pot manner. Notably, the nucleophilic substitution positions of indazole and benzotriazole were perfectly controlled. Additionally, the reaction using N-methylaniline as the nucleophile afforded a tertiary amine product.

Revisiting the synthesis of aryl nitriles: a pivotal role of CAN.

Facilitated by the dual role of Ceric Ammonium Nitrate (CAN), herein we report a cost-effective approach for the cyanation of aryl iodides/bromides with CAN-DMF as an addition to the existing pool of combined cyanation sources. In addition to being an oxidant, CAN acts as a source of nitrogen in our protocol. The reaction is catalyzed by a readily available Cu(ii) salt and the ability of CAN to generate ammonia in the reaction medium is utilized to eliminate the additional requirement of a nitrogen source, ligand, additive or toxic reagents. The mechanistic study suggests an evolution of CN- leading to the synthesis of a variety of aryl nitriles in moderate to good yields. The proposed mechanism is supported by a series of control reactions and labeling experiments.

Ruthenium-on-Carbon-Catalyzed Facile Solvent-Free Oxidation of Alcohols: Efficient Progress under Solid-Solid (Liquid)-Gas Conditions.

A protocol for the ruthenium-on-carbon (Ru/C)-catalyzed solvent-free oxidation of alcohols, which proceeds efficiently under solid-solid (liquid)-gas conditions, was developed. Various primary and secondary alcohols were transformed to corresponding aldehydes and ketones in moderate to excellent isolated yields by simply stirring in the presence of 10% Ru/C under air or oxygen conditions. The solvent-free oxidation reactions proceeded efficiently regardless of the solid or liquid state of the substrates and reagents and could be applied to gram-scale synthesis without loss of the reaction efficiency. Furthermore, the catalytic activity of Ru/C was maintained after five reuse cycles.

Hydroquinone and benzoquinone-catalyzed aqueous Knoevenagel condensation.

A Knoevenagel condensation of various aldehydes with malononitrile effectively proceeded in the presence of hydroquinone/benzoquinone mixed catalysts at room temperature in H2O. Furthermore, γ-deuterium-labeled α,ß-unsaturated nitrile derivatives were also constructed via a deuteration of an aliphatic aldehyde in D2O using a basic resin and the subsequent Knoevenagel condensation.

Arylation of indoles using cyclohexanones dually-catalyzed by niobic acid and palladium-on-carbons.

3-Arylindoles were easily constructed from indoles and cyclohexanone derivatives using a combination of catalytic niobic acid-on-carbon (Nb2O5/C) and palladium-on-carbon (Pd/C) under heating conditions without any oxidants. The Lewis acidic Nb2O5/C promoted the nucleophilic addition of indoles to the cyclohexanones, and the subsequent dehydration and Pd/C-catalyzed dehydrogenation produced the 3-arylindoles. The additive 2,3-dimethyl-1,3-butadiene worked as a hydrogen acceptor to facilitate the dehydrogenation step.

Continuous-Flow Suzuki-Miyaura and Mizoroki-Heck Reactions under Microwave Heating Conditions.

Microwave-assisted continuous-flow reactions have attracted significant interest from synthetic organic chemists, especially process chemists from practical points of view, due to a less complicated shift to large-scale synthesis based on simple and continuous access to products with low energy requirements. In this personal account, we focused on the Suzuki-Miyaura and Mizoroki-Heck reactions, both of which are significantly important cross-coupling reactions for the synthesis of various functional materials. Microwave power is effective for heating. Typical homogeneous palladium catalysts, such as PdCl2 (PPh3 )2 , Pd(PPh3 )4 , and Pd(OAc)2 , as well as heterogeneous palladium catalysts, such as Pd-film, Pd/Al2 O3 , Pd/SiO2 , and Pd supported on polymers, can be used for these reactions.

Chemoselective Nucleophilic Functionalizations of Aromatic Aldehydes and Acetals via Pyridinium Salt Intermediates.

The development of a novel chemoselective functionalization can diversify the strategy for synthesizing the target molecules. The perfect chemoselectivity between aromatic and aliphatic aldehydes is difficult to achieve by the previous methods. The aromatic aldehyde-selective nucleophilic addition in the presence of aliphatic aldehydes was newly accomplished. Namely, the aromatic aldehyde-selective nucleophilic addition using arenes and allyl silanes proceeded in the presence of trialkylsilyl triflate and 2,2'-bipyridyl, while the aliphatic aldehydes completely remained unchanged. The reactive pyridinium-type salt intermediate derived from an aromatic aldehyde chemoselectively underwent the nucleophilic substitution. Moreover, the aromatic acetals as the protected aldehydes could be directly transformed into similar pyridinium salt intermediates, which reacted with various nucleophiles coexisting with the aliphatic aldehydes.

New Gateways to the Platinum Group Metal-Catalyzed Direct Deuterium-Labeling Method Utilizing Hydrogen as a Catalyst Activator.

Deuterium-labeled compounds are widely utilized in various scientific fields. We summarize the recent advances in the direct deuteration of sugar, saturated fatty acid, and arene derivatives using heterogeneous platinum group metal on carbon catalysts by our research group. Hydrogen gas is a key catalyst-activator to facilitate the present H-D exchange reactions. In this review, the direct activation method of catalysts using in situ-generated hydrogen based on the dehydrogenation of alcohols is introduced. The obtained multiple deuterium-labeled products, including bioactive compounds, are expected to contribute to the development of many scientific investigations.

Palladium on Carbon-Catalyzed Benzylic Methoxylation for Synthesis of Mixed Acetals and Orthoesters.

The palladium on carbon (Pd/C)-catalyzed direct methoxylation of the benzylic positions of linear benzyl and cyclic ether substrates proceeded in the presence of i-Pr2 NEt under an oxygen atmosphere to give the corresponding mixed acetals. Cyclic acetal derivatives could also be converted into orthoesters. The present direct methoxylation via a carbon-hydrogen (C-H) functionalization can be accomplished using the easily-removed Pd/C and molecular oxygen as a green oxidant. The obtained mixed acetals were transformed into the corresponding ether products by chemoselective substitution of the methoxy group using a silyltriflate, 2,4,6-collidine, and a nucleophile. The orthoester derivative could also be transformed into the cyclic ketal under similar reaction conditions.

Heterogeneous One-Pot Carbonylation and Mizoroki-Heck Reaction in a Parallel Manner Following the Cleavage of Cinnamaldehyde Derivatives.

Carbon monoxide (CO) and styrene derivatives that can be both generated by a palladium on carbon (Pd/C)-catalyzed carbon-carbon (C-C) bond cleavage reaction of cinnamaldehyde derivatives were effectively utilized in further palladium-catalyzed C-C bond forming reactions in a direct and practical way. CO derived from simple and affordable CO carriers such as cinnamaldehyde or terephthalaldehyde was efficiently employed in the in situ CO fixation with various aromatic iodides through a palladium-catalyzed carbonylation followed by an inter- or intramolecular coupling reaction with alcohols to afford the corresponding esters or lactones, respectively. Styrene derivatives were also efficient substrates in an in situ Mizoroki-Heck-type cross-coupling reaction with aryl iodides, leading to the effective formation of asymmetric stilbenes. The decarbonylation of cinnamaldehyde derivatives and the subsequent independent syntheses of both esters/lactones and 1,2-diarylethenes could be achieved in a virtual one-pot and in situ reaction using a H-shaped pressure-tight glass-sealed tube consisting of two independent but laterally connected reaction tubes in the gas space.

Catalyst-Dependent Selective Hydrogenation of Nitriles: Selective Synthesis of Tertiary and Secondary Amines.

In the presence of palladium on carbon (Pd/C) as a catalyst, hydrogenation of aliphatic nitriles in cyclohexane efficiently proceeded at 25-60 °C under ordinary hydrogen gas pressure to afford the corresponding tertiary amines. However, the use of rhodium on carbon (Rh/C) led to the highly selective generation of secondary amines. Hydrogenation of aromatic nitriles and cyclohexanecarbonitrile selectively produced secondary amines in the presence of either Pd/C or Rh/C.

Recent Development of Palladium-Supported Catalysts for Chemoselective Hydrogenation.

This paper describes practical and selective hydrogenation methodologies using heterogeneous palladium catalysts. Chemoselectivity develops dependent on the catalyst activity based on the characteristic of the supports, derived from structural components, functional groups, and/or morphologies. We especially focus on our recent development of heterogeneous palladium catalysts supported on chelate resin, ceramic, and spherically shaped activated carbon. In addition, the application of flow technology for chemoselective hydrogenation using the palladium catalysts immobilized on molecular sieves 3A and boron nitride is outlined.

Versatile Oxidation Methods for Organic and Inorganic Substrates Catalyzed by Platinum-Group Metals on Carbons.

Platinum-group metals on activated carbon catalysts, represented by Pd/C, Ru/C, Rh/C, etc., are widely utilized to accomplish green and sustainable organic reactions due to their favorable features, such as easy handling, recoverability, and reusability. The efficient oxidation methods of various organic compounds using heterogeneous platinum-group metals on carbons with or without added oxidants are summarized in this Personal Account. The oxidation of internal alkynes into diketones was effectively catalyzed by Pd/C in the presence of dimethyl sulfoxide and molecular oxygen or pyridine N-oxide. The Pd/C-catalyzed mild combustion of gaseous hydrogen with molecular oxygen provided hydrogen peroxide, which could be directly utilized for the oxidation of sulfide derivatives into sulfoxides. Furthermore, the Ru/C-catalyzed aerobic oxidation of primary and secondary alcohols gave the corresponding aldehydes and ketones, respectively. On the other hand, the dehydrogenative oxidation of secondary alcohols into ketones was achieved using Rh/C in water, and primary alcohols were effectively dehydrogenated by Pd/C in water under mildly reduced pressure to produce carboxylic acids.

Switching the Cleavage Sites in Palladium on Carbon-Catalyzed Carbon-Carbon Bond Disconnection.

We have demonstrated a palladium on carbon-catalyzed approach to regioselectively alter the cleavage sites of the C-C bonds of cinnamaldehyde derivatives by a slight change in the reaction conditions in isopropanol under an O2 atmosphere. Styrene derivatives could be selectively formed by the addition of Na2CO3 in association with the dissociation of carbon monoxide, while benzaldehyde derivatives were generated by the addition of CuCl and morpholine instead of Na2CO3.

Disiloxane Synthesis Based on Silicon-Hydrogen Bond Activation using Gold and Platinum on Carbon in Water or Heavy Water.

Disiloxanes possessing a silicon-oxygen linkage are important as frameworks for functional materials and coupling partners for Hiyama-type cross coupling. We found that disiloxanes were effectively constructed of hydrosilanes catalyzed by gold on carbon in water as the solvent and oxidant in association with the emission of hydrogen gas at room temperature. The present oxidation could proceed via various reaction pathways, such as the hydration of hydrosilane into silanol, dehydrogenative coupling of hydrosilane into disilane, and the subsequent corresponding reactions to disiloxane. Additionally, the platinum on carbon catalyzed hydrogen-deuterium exchange reaction of arylhydrosilanes as substrates in heavy water proceeded on the aromatic nuclei at 80 °C with high deuterium efficiency and high regioselectivity at the only meta and para positions of the aromatic-silicon bond to give the deuterium-labeled disiloxanes.

Additional Nucleophile-Free FeCl3-Catalyzed Green Deprotection of 2,4-Dimethoxyphenylmethyl-Protected Alcohols and Carboxylic Acids.

The deprotection of the methoxyphenylmethyl (MPM) ether and ester derivatives can be generally achieved by the combinatorial use of a catalytic Lewis acid and stoichiometric nucleophile. The deprotections of 2,4-dimethoxyphenylmethyl (DMPM)-protected alcohols and carboxylic acids were found to be effectively catalyzed by iron(III) chloride without any additional nucleophile to form the deprotected mother alcohols and carboxylic acids in excellent yields. Since the present deprotection proceeds via the self-assembling mechanism of the 2,4-DMPM protective group itself to give the hardly-soluble resorcinarene derivative as a precipitate, the rigorous purification process by silica-gel column chromatography was unnecessary and the sufficiently-pure alcohols and carboxylic acids were easily obtained in satisfactory yields after simple filtration.

Biaryl synthesis by ring-opening Friedel-Crafts arylation of 1,4-epoxy-1,4-dihydronaphthalenes catalyzed by iron trichloride.

Biaryl and heterobiaryl compounds are important frameworks across a range of fields including pharmaceutical and functional material chemistries. We have accomplished the efficient synthesis of various naphthalene-linked arenes and heteroarenes as biaryls and heterobiaryls by the FeCl3 -catalyzed Friedel-Crafts reactions accompanied by the ring-opening of the 1,4-epoxy moiety of 1,4-epoxy-1,4-dihydronaphthalenes. Especially, it is noteworthy that 1-silylated substrates were regioselectively transformed to the 3-aryl-1-silylnaphthalenes and the double Friedel-Crafts reactions using thiophene derivatives could directly produce the corresponding bis-naphthlated thiophene derivatives.

Biarylmethane and Fused Heterocyclic Arene Synthesis via in Situ Generated o- and/or p-Naphthoquinone Methides.

o- and/or p-naphthoquinone methides (NQMs) can be selectively prepared by the ring opening of 1-(siloxymethyl)-1,4-epoxy-1,4-dihydronaphthalene derivatives based on a substituent effect at the 4 position of the substrates. The 4-alkyl- or silyl-substituted 1-(siloxymethyl)-1,4-epoxy-1,4-dihydronaphthalene was transformed to o-NQM (1-naphthoquinone-2-methide), which underwent Friedel-Crafts 1,4-addition of the α,ß-unsaturated carbonyl moiety to provide the 2-benzyl-1-naphthol as the biarylmethane and [4 + 2]-cycloaddition with a dienophile to give the fused heterocyclic arene. Meanwhile, the 4-unsubstituted 1-(siloxymethyl)-1,4-epoxy-1,4-dihydronaphthalene could be converted to the corresponding 4-benzyl-1-naphthol by the Friedel-Crafts 1,6-addition of p-NQM (1-naphthoquinone-4-methide) generated by the site-selective ring opening of the 1,4-epoxy moiety. Furthermore, the 4-(siloxymethyl)-(1,4-bis(siloxymethyl))-1,4-epoxy-1,4-dihydronaphthalene was transformed into a 2,4-bisbenzyl-1-naphthol or pentacyclic derivative via both the o- and p-NQM intermediates.

Gold-Catalyzed Benzylic Azidation of Phthalans and Isochromans and Subsequent FeCl3-Catalyzed Nucleophilic Substitutions.

The benzylic positions of the phthalan and isochroman derivatives (1) as benzene-fused cyclic ethers effectively underwent gold-catalyzed direct azidation using trimethylsilylazide (TMSN3) to give the corresponding 1-azidated products (2) possessing the N,O-acetal partial structure. The azido group of the N,O-acetal behaved as a leaving group in the presence of catalytic iron(III) chloride, and 1-aryl or allyl phthalan and isochroman derivatives were obtained by nucleophilic arylation or allylation, respectively. Meanwhile, a double nucleophilic substitution toward the 1-azidated products (2) occurred at the 1-position using indole derivatives as a nucleophile accompanied by elimination of the azido group and subsequent ring opening of the cyclic ether nucleus produced the bisindolylarylmethane derivatives.