Centimeter-sized diamond composites with high electrical conductivity and hardness.

Achieving high-performance materials with superior mechanical properties and electrical conductivity, especially in large-sized bulk forms, has always been the goal. However, it remains a grand challenge due to the inherent trade-off between these properties. Herein, by employing nanodiamonds as precursors, centimeter-sized diamond/graphene composites were synthesized under moderate pressure and temperature conditions (12 GPa and 1,300 to 1,500 °C), and the composites consisted of ultrafine diamond grains and few-layer graphene domains interconnected through covalently bonded interfaces. The composites exhibit a remarkable electrical conductivity of 2.0 × 104 S m-1 at room temperature, a Vickers hardness of up to ~55.8 GPa, and a toughness of 10.8 to 19.8 MPa m1/2. Theoretical calculations indicate that the transformation energy barrier for the graphitization of diamond surface is lower than that for diamond growth directly from conventional sp2 carbon materials, allowing the synthesis of such diamond composites under mild conditions. The above results pave the way for realizing large-sized diamond-based materials with ultrahigh electrical conductivity and superior mechanical properties simultaneously under moderate synthesis conditions, which will facilitate their large-scale applications in a variety of fields.

Efficient Deep-Blue Light-Emitting Diodes from Highly Luminescent Eu2+-Doped Alkali Metal Halide Nanocrystals via Lattice Field Modulation.

Lead-halide perovskite nanocrystals (NCs) are promising for fabricating deep-blue (<460 nm) light-emitting diodes (LEDs), but their development is plagued by low electroluminescent performance and lead toxicity. Herein, the synthesis of 12 kinds of highly luminescent and eco-friendly deep-blue europium (Eu2+)-doped alkali-metal halides (AX:Eu2+; A = Na+, K+, Rb+, Cs+; X = Cl-, Br-, I-) NCs is reported. Through adjustment of the coordination environment, efficient deep-blue emission from Eu-5d → Eu-4f transitions is realized. The representative CsBr:Eu2+ NCs exhibit a high photoluminescence quantum yield of 91.1% at 441 nm with a color coordinate at (0.158, 0.023) matching with the Rec. 2020 blue specification. Electrically driven deep-blue LEDs from CsBr:Eu2+ NCs are demonstrated, achieving a record external quantum efficiency of 3.15% and half-lifetime of ∼1 h, surpassing the reported metal-halide deep-blue NCs-based LEDs. Importantly, large-area LEDs with an emitting area of 12.25 cm2 are realized with uniform emission, representing a milestone toward commercial display applications.

Thermally Enhanced Phosphorescent Carbon Nanodots for Monitoring Cold-Chain Logistics.

Room-temperature phosphorescent materials, renowned for their long luminescence lifetimes, have garnered significant attention in the field of optical materials. However, the challenges posed by thermally induced quenching have significantly hindered the advancement of luminescence efficiency and stability. In this study, thermally enhanced phosphorescent carbon nanodots (CND) are developed by incorporating them into fiber matrices. Remarkably, the phosphorescence lifetime of the thermally enhanced CND exhibits a twofold enhancement, increasing from 326 to 753 ms, while the phosphorescence intensity experienced a tenfold enhancement, increasing from 25 to 245 as the temperature increased to 373 K. Rigid fiber matrices can effectively suppress the non-radiative transition rate of triplet excitons, while high temperatures can desorb oxygen adsorbed on the surface of the CND, disrupting the interaction between the CND and oxygen. Consequently, a thermally enhanced phosphorescence is obtained. In addition, benefiting from the thermally enhanced phosphorescence property of CND, a warning indicator with an anti-counterfeiting function for monitoring cold-chain logistics is demonstrated based on CND.

Geometry optimization of cantilever-based optical microphones.

The introduction of cantilever-based fiber-optic microphones (FOMs) has proven to be effective in acoustic sensing. Further improvements in cantilevers face two key constraints: the challenge of achieving minimal sizes with sufficient reflective area and the trade-off between sensitivity and response bandwidth. Herein, we present a geometry optimization framework for a cantilever-based FOM that addresses this issue. Employing drumstick-shaped cantilevers housed within a Fabry-Perot (F-P) interferometric structure, we showcase a heightened sensitivity of 302.8 mV/Pa at 1 kHz and a minimum detectable acoustic pressure (MDP) of 2.35 µPa/H z. Notably, these metrics outperform those of the original rectangular cantilever with identical dimensions. Furthermore, our proposed cantilever effectively mitigates the reduction in resonance frequencies, thereby improving the response bandwidth. This geometry optimization framework offers considerable design flexibility and scalability, making it especially suitable for high-performance acoustic sensing applications.

Uncooled Mid-Infrared Sensing Enabled by Chip-Integrated Low-Temperature-Grown 2D PdTe2 Dirac Semimetal.

Next-generation mid-infrared (MIR) imaging chips demand free-cooling capability and high-level integration. The rising two-dimensional (2D) semimetals with excellent infrared (IR) photoresponses are compliant with these requirements. However, challenges remain in scalable growth and substrate-dependence for on-chip integration. Here, we demonstrate the inch-level 2D palladium ditelluride (PdTe2) Dirac semimetal using a low-temperature self-stitched epitaxy (SSE) approach. The low formation energy between two precursors facilitates low-temperature multiple-point nucleation (∼300 °C), growing up, and merging, resulting in self-stitching of PdTe2 domains into a continuous film, which is highly compatible with back-end-of-line (BEOL) technology. The uncooled on-chip PdTe2/Si Schottky junction-based photodetector exhibits an ultrabroadband photoresponse of up to 10.6 µm with a large specific detectivity. Furthermore, the highly integrated device array demonstrates high-resolution room-temperature imaging capability, and the device can serve as an optical data receiver for IR optical communication. This study paves the way toward low-temperature growth of 2D semimetals for uncooled MIR sensing.

Supramolecular Aggregation of Carbon Nanodots.

Supramolecular aggregation has provided the archetype concept to understand the variants in an emerging systems property. Herein, we have achieved the supramolecular assembly of carbon nanodots (CDs) for the first time and employ supramolecular aggregation to understand their alteration in photophysical properties. In detail, we have employed the CDs as a block to construct the supramolecular assembly of aggregates in the CDs' antisolvent of ethanol. The CD-based aggregates exhibit complex and organized morphologies with another long-wavelength excitation-dependent emission band. The experimental results and density functional theoretical calculations reveal that the supramolecular assembly of CDs can decrease the energy gap between the ground and excited states, contributing to the new long-wavelength excitation-dependent emission. The supramolecular aggregation can be employed as one universal strategy to manipulate and understand the luminescence of CDs. These findings cast new light to build the emerging systems and understand the light emission of CDs through supramolecular chemistry.

Highly Antibacterial and Antioxidative Carbon Nanodots/Silk Fibroin Films for Fruit Preservation.

The issues of fruit waste and safety resulting from rot have spurred a demand for improved packaging systems. Herein, we present highly antibacterial and antioxidative carbon nanodot/silk fibroin (CD/SF) films for fruit preservation. The films are composed of CDs and SF together with a small amount of glycerol via hydrogen bonding, exhibiting outstanding biosafety, transparency, and stretchability. The films effectively integrate key functionalities (atmosphere control, resistance to food-borne pathogens, and antioxidation properties) and can be manufactured in large sizes (about 20 × 30 cm), boasting a transmission rate of 13 183 cm3/m2·day for oxygen and 2860 g/m2·day for water vapor, favoring the preservation of fresh fruits. A convenient dip-coating method enables in situ fabrication of films with a thickness of approximately 14 µm directly on the fruits' surface providing comprehensive protection. Importantly, the films are washable and biodegradable. This work presents a promising technology to produce multifunctional and eco-friendly antibacterial packaging systems.

Enhanced Phosphorescence of Carbon Nanodots via Double Confinement for 3D Artworks with Long Emission Lifetimes.

Phosphorescent materials as block elements to build artwork incorporating the time and emission, enable them with spectacular lighting effects. In this work, enhanced phosphorescence of carbon nanodots (CNDs) is demonstrated via double confinement strategy, which silica and epoxy resin are used as the first and the second order confinement layer. The multi-confined CNDs show an enhanced phosphorescence quantum yield up to 16.4%, with enduring emission lifetime up to 1.44 s. Delicately, the plasticity of the epoxy resin enables them easily to be designed for 3D artworks with long emission lifetimes in different shapes. The efficient and eco-friendly phosphorescent CNDs may arouse intense interest both in the academic community and markets.

In Situ Confining Citric Acid-Derived Carbon Dots for Full-Color Room-Temperature Phosphorescence.

Room-temperature phosphorescence has received much attention owing to its potential applications in information encryption and bioelectronics. However, the preparation of full-color single-component-derived phosphorescent materials remains a challenge. Herein, a facile in situ confining strategy is proposed to achieve full-color phosphorescent carbon dots (CDs) through rapid microwave-assisted carbonization of citric acid in NaOH. By tuning the mass ratio of citric acid and NaOH, the obtained CDs exhibit tunable phosphorescence wavelengths ranging from 483 to 635 nm and alterable lifetimes from 58 to 389 ms with a synthesis yield of up to 83.7% (>30 g per synthesis). Theoretical calculations and experimental results confirm that the formation of high-density ionic bonds between cations and CDs leads to efficient afterglow emission via the dissociation of CD arrangement, and the evolution of the aggregation state of CDs results in redshifted phosphorescence. These findings provide a strategy for the synthesis of new insights into achieving and manipulating room-temperature phosphorescent CDs, and prospect their applications in labeling and information encryption.

Sensitivity-enhanced Fabry-Perot interferometric fiber-optic microphone using hollow cantilever.

Transducer components are crucial in optimizing the sensitivity of microphones. Cantilever structure is commonly used as a structural optimization technique. Here, we present a novel Fabry-Perot (F-P) interferometric fiber-optic microphone (FOM) using a hollow cantilever structure. The proposed hollow cantilever aims to reduce the effective mass and spring constant of the cantilever, thereby enhancing the sensitivity of the FOM. Experimental results demonstrate that the proposed structure outperforms the original cantilever design in terms of sensitivity. The sensitivity and minimum detectable acoustic pressure level (MDP) can reach 91.40 mV/Pa and 6.20 µPa/Hz at 1.7 kHz, respectively. Notably, the hollow cantilever provides an optimization framework for highly sensitive FOMs.

Near-infrared sensitive differential Helmholtz-based hydrogen sulfide photoacoustic sensors.

A near-infrared (NIR) sub-ppm level photoacoustic sensor for hydrogen sulfide (H2S) using a differential Helmholtz resonator (DHR) as the photoacoustic cell (PAC) was presented. The core detection system was composed of a NIR diode laser with a center wavelength of 1578.13 nm, an Erbium-doped optical fiber amplifier (EDFA) with an output power of ∼120 mW, and a DHR. Finite element simulation software was used to analyze the influence of the DHR parameters on the resonant frequency and acoustic pressure distribution of the system. Through simulation and comparison, the volume of the DHR was 1/16 that of the conventional H-type PAC for a similar resonant frequency. The performance of the photoacoustic sensor was evaluated after optimizing the DHR structure and modulation frequency. The experimental results showed that the sensor had an excellent linear response to the gas concentration and the minimum detection limit (MDL) for H2S detection in differential mode can reach 460.8 ppb.

Ga2O3-Based Solar-Blind Position-Sensitive Detector for Noncontact Measurement and Optoelectronic Demodulation.

As a kind of photodetector, position-sensitive-detectors (PSDs) have been widely used in noncontact photoelectric positioning and measurement. However, fabrications and applications of solar-blind PSDs remain yet to be harnessed. Herein, we demonstrate a solar-blind PSD developed from a graphene/Ga2O3 Schottky junction with a 25-nanometer-thick Ga2O3 film, in which the absorption of the nanometer-thick Ga2O3 is enhanced by multibeam interference. The graphene/Ga2O3 junction exhibits a responsivity of 48.5 mA/W and a rise/decay time of 0.8/99.8 µs at zero bias. Moreover, the position of the solar-blind spot can be determined by the output signals of the PSD. Using the device as a sensor of noncontact test systems, we demonstrate its application in measurement of angular, displacement, and light trajectory. In addition, the position-sensitive outputs have been used to demodulate optical signals into electrical signals. The results may prospect the application of solar-blind PSDs in measurement, tracking, communication, and so on.

Regulating the Singlet and Triplet Emission of Sb3+ Ions to Achieve Single-Component White-Light Emitter with Record High Color-Rendering Index and Stability.

The rapid development of solid-state lighting technology has attracted much attention for searching efficient and stable luminescent materials, especially the single-component white-light emitter. Here, we adopt a facile ion-doping technology to synthesize vacancy-ordered double perovskite Cs2ZrCl6:Sb. The introduction of Sb3+ ions with a 5s2 active lone pair into Cs2ZrCl6 host stimulates the singlet (blue) and triplet (orange) states emission of Sb3+ ions, and their relative emission intensity can be tuned through the energy transfer from singlet to triplet states. Benefiting from the dual-band emission as a pair of perfect complementary colors, the optimum Cs2ZrCl6:1.5%Sb exhibits a high-quality white emission with a color-rendering index of 96. By employing Cs2ZrCl6:1.5%Sb as the down-conversion phosphor, stable single-component white light-emitting diodes with a record half-lifetime of 2003 h were further fabricated. This study puts forward an effective ion-doping strategy to design single-component white-light emitter, making practical applications of them in lighting technologies a real possibility.

Brighten Triplet Excitons of Carbon Nanodots for Multicolor Phosphorescence Films.

Triplet excitons usually do not emit light under ambient conditions due to the spin-forbidden transition rule, thus they are called dark excitons. Herein, triplet excitons in carbon nanodots (CNDs) are brightened by embedding the CNDs into poly(vinyl alcohol) (PVA) films; flexible multicolor phosphorescence films are thus demonstrated. PVA chains can isolate the CNDs, and excited state electron or energy transfer induced triplet exciton quenching is thus reduced; while the formed hydrogen bonds between the CNDs and PVA can restrict vibration/rotation of the CNDs, thus further protecting the triplet excitons from nonradiative recombination. The lifetimes of the flexible multicolor phosphorescence films can reach 567, 1387, 726, and 311 ms, and the longest-lasting phosphorescence film can be observed by naked eyes for nearly 15 s even after bending 5000 times. The phosphorescence films can be processed into various patterns, and a dynamic optical signature concept has been proposed and demonstrated based on the phosphorescence films.

White Light Afterglow in Carbon Dots Achieved via Synergy between the Room-Temperature Phosphorescence and the Delayed Fluorescence.

Carbon dot (CD) based long-lived afterglow emission materials have attracted attention in recent years, but demonstration of white-light room-temperature afterglow remains challenging, due to the difficulty of simultaneous generation of multiple long-lived excited states with distinct chromatic emission. In this work, a white-light room-temperature long-lived afterglow emission from a CD powder with a high efficiency of 5.8% and Commission International de l'Eclairage (CIE) coordinates of (0.396, 0.409) is realized. The afterglow of the CDs originates from a synergy between the phosphorescence of the carbon core and the delayed fluorescence associated with the surface CN moieties, which is accomplished by matching the singlet state of the surface groups of the CDs with the long-lived triplet state of the carbon core, resulting in an efficient energy transfer. It is demonstrated how the long-lived afterglow emission of CDs can be utilized for fabrication of white light emitting devices and in anticounterfeiting applications.

Electron-hole plasma Fabry-Perot lasing in a Ga-incorporated ZnO microbelt via Ag nanoparticle deposition.

In this work, individual ZnO via Ga-doped (ZnO:Ga) microbelts with excellent crystallinity and smooth facets can enable the realization of lateral microresonator Fabry-Perot (F-P) microlasers, and the F-P lasing action originates from excitonic state. Interestingly, introducing Ag nanoparticles (AgNPs) deposited on the microbelt can increase F-P lasing characteristics containing a lower threshold and enhanced lasing output. Especially for the large size AgNPs (the diameter d is approximately 200 nm), the lasing features also exhibit a significant redshift of each lasing peak and an observable broadening of the spectral line width with an increase of the excitation fluence. And the remarkable lasing characteristics are belonging to the electron-hole plasma (EHP) luminescence. The behavior and dynamics of the stimulated radiation in an AgNPs@ZnO:Ga microbelt are studied, suggesting the Mott-transition from the excitonic state to EHP state that is responsible for the F-P lasing. These features can be attributed to the working mechanism that the hot electrons created by the large size AgNPs through nonradiative decay can fill the conduction band of nearby ZnO:Ga, leading to a downward shift of the conduction band edge. This novel filling influence can facilitate bandgap renormalization and result in EHP emission. The results provide a comprehensive understanding of the transition between excitonic and EHP states in the stimulated emission process. More importantly, it also can provide new scheme to developing high efficiency and ultra-low threshold microlasing diodes.

Active Frequency Measurement on Superradiant Strontium Clock Transitions.

We develop a stochastic mean-field theory to describe active frequency measurements of pulsed superradiant emission, studied in a recent experiment with strontium-87 atoms trapped in an optical lattice inside an optical cavity [M. Norcia et al., Phys. Rev. X 8, 021036 (2018)PRXHAE2160-330810.1103/PhysRevX.8.021036]. Our theory reveals the intriguing dynamics of atomic ensembles with multiple transition frequencies, and it reproduces the superradiant beats signal, noisy power spectra, and frequency uncertainty in remarkable agreement with the experiments. Moreover, using longer superradiant pulses of similar strength and shortening the experimental duty cycle, we predict a short-term frequency uncertainty 7×10^{-17}/sqrt[τ/s], which makes active frequency measurements with superradiant transitions comparable with the record performance of current frequency standards [M. Schioppo et al., Nat. Photonics 11, 48 (2017)NPAHBY1749-488510.1038/nphoton.2016.231]. Our theory combines cavity quantum electrodynamics and quantum measurement theory, and it can be readily applied to explore conditional quantum dynamics and describe frequency measurements for other processes such as steady-state superradiance and superradiant Raman lasing.

Cavity Quantum Electrodynamics Effects with Nitrogen Vacancy Center Spins Coupled to Room Temperature Microwave Resonators.

Cavity quantum electrodynamics (CQED) effects, such as Rabi splitting, Rabi oscillations, and superradiance, have been demonstrated with nitrogen vacancy (NV) center spins in diamond coupled to microwave resonators at cryogenic temperature. In this Letter, we explore the possibility to realize strong collective coupling and CQED effects with ensembles of NV spins at room temperature. Our calculations show that thermal excitation of the individual NV spins leads to population of collective Dicke states with low symmetry and a reduced collective coupling to the microwave resonators. Optical pumping can be applied to counteract the thermal excitation of the NV centers and to prepare the spin ensemble in Dicke states with high symmetry. The resulting strong coupling with high-quality resonators enables the study of intriguing CQED effects across the weak-to-strong coupling regime, and may have applications in quantum sensing and quantum information processing.

Superhydrophobic Nanodiamond-Functionalized Melamine Sponge for Oil/Water Separation.

Fabrication of absorbent materials foroil/water separation is an important ecological pursuit for oil spill clean-up and organic pollutants' removal. In this study, nanodiamonds (NDs), a promising member of the carbon family, were functionally modified by the covalent linking of octadecylamine (ODA). Subsequently, the superhydrophobic sponge with hierarchical microstructures was fabricated by embedding ND-ODA into a melamine sponge (MS) skeleton via a simple immersion-drying process. The as-prepared sponge (ND-ODA@PDMS@MS) showed superhydrophobic properties with a water contact angle of 155 ± 2°. For various oils and organic solvents, ND-ODA@PDMS@MS possesses excellent absorption capacity (26.65-55.64 g/g) and oil/water separation efficiency (above 98.6%). Furthermore, the adsorption capacity to crude oil remained relatively stable in highly acidic, alkaline, and salty conditions, ensuring the application in the clean-up of industrial oily sewages and marine oil spills. Besides absorbing oil for a single time, ND-ODA@PDMS@MS also exhibited satisfactory performance in continuous oil/water separation. Therefore, this work provides a facile strategy to produce robust and efficient absorbent materials for oil/water separation in large-scale oil and organic solvent clean-ups.

Excitation-independent deep-blue emitting carbon dots with 62% emission quantum efficiency and monoexponential decay profile for high-resolution fingerprint identification.

Reaching emissive nanomaterials at short wavelengths with a high quantum efficiency (QE) is an attractive task for researchers. This is more demanding in carbon dots (CDs) with diverse applications that usually emit photons at wavelengths around 450-620 nm. In this study, deep blue-emissive doped-CDs (d-CDs) with high photoluminescence (PL) QE up to 62% and excitation-independent properties were prepared via a short-time microwave irradiation method. The prepared CDs showed simultaneous amorphous and crystalline features, with average sizes of 4.75 nm and bright emission color located at 422 nm. It was found that the presence of sulfur-related dopant levels plays a key role in emission properties in such a way that the PL signal drops significantly in the absence of N-acetyl-l-cysteine (NAC) as a dopant source. On the other hand, the trisodium citrate dihydrate (TSC) was selected as a carbon source to form the main carbon skeleton without it no emission was recorded. Monoexponential-fitted recombination trend with an average lifetime of about 10 ns also confirmed excellent PL emission properties with uniform energy levels and minimized defect-contributing recombinations. The practical use of the as-prepared N, S-doped CDs was assessed in fingerprint detection indicating a bright and clear scheme for both core and termination regions of the fingerprint. Simplicity, cost-effectiveness, high-product yield, low toxicity, along with high/stable PL quantum efficiency in deep-blue wavelengths, and demonstrated ability for fingerprint purposes, support the prospective application of these dual doped-CDs for sensing and bioimaging applications.