Interlayer Coupling in Anisotropic/Isotropic Van der Waals Heterostructures of ReS2 and WS2.

Van der Waals (vdW) heterostructures are composed of atomically thin layers assembled through weak (vdW) force, which have opened a new era for integrating materials with distinct properties and specific applications. However, few studies have focused on whether and how anisotropic materials affect heterostructure system. The study introduces anisotropic and isotropic materials in a heterojunction system to change the in-plane symmetry, offering a new degree of freedom for modulating its properties. The sample is fabricated by manually stacking ReS2 and WS2 flakes prepared by mechanical exfoliation. Raman spectra and photoluminescence measurements confirm the formation of an effective heterojunction, indicating interlayer coupling of the system. The anisotropy and asymmetry of the WS2 -ReS2 heterostructure system can be adjusted by the introduction of isotropic WS2 and anisotropic ReS2 , which can be proved by the change of the polarized Raman pattern. In the transient absorption measurement, the transient absorption spectra of WS2 -ReS2 heterostructure are red-shifted compared to those of WS2 monolayer, and the charge transfer is observed in the heterostructure. These results show the potential of anisotropic 2D materials in anisotropy modulation of heterostructures, which may promote future electronic or photonic application.

Solvent Polarity-Induced Regulation of Cation Solvation Sheaths for High-Voltage Zinc-Based Batteries with a 1.94 V Discharge Platform.

To address the challenge of low discharge platforms (<1.5 V) in aqueous zinc-based batteries, highly concentrated salts have been explored due to their wide electrochemical window (~3 V). However, these electrolytes mainly prevent hydrogen evolution and dendrite growth at the anode without significantly enhancing voltage performance. Herein we introduce an approach by adjusting solvent polarity to regulate cation solvation sheaths in hybrid electrolytes, reducing Zn/Zn2+ oxidation potential and water activity. Through strong cation-water coordination and hydrogen bonding between dimethylsulfoxide and water, the designed electrolyte, at a low concentration, achieves a broader electrochemical window (4 V) than conventional concentrated electrolytes. Using this electrolyte, a Zn/Zn battery showed an impressive cycle life of 4340 cycles, while a Zn/lithium manganate battery delivered a high discharge platform of over 1.9 V with exceptional cycling stability. A Zn-based micro-battery with a polyvinyl alcohol-based hybrid electrolyte also achieved a record-high discharge platform of 1.94 V. This work presents a promising strategy for developing low-concentration electrolytes for high-performance sustainable energy storage.

Activating the Electrocatalysis of MoS2 Basal Plane for Hydrogen Evolution via Atomic Defect Configurations.

Point defects of heteroatoms and vacancies can activate the inert basal plane of molybdenum sulfide (MoS2 ) to improve its performance on catalyzing the hydrogen evolution reaction (HER). However, the synergy between heteroatoms and vacancies is still unclear. Here, a chemical vapor deposition-assisted in situ vanadium (V) doping method is used to synthesize monolayer MoS2 with abundant and tunable vacancies and V-dopants in the lattice. Ten delicate defect configurations are prepared to provide a complex system for the relationship investigation between microstructure and catalytic performance. The combination of on-chip electrochemical tests and theoretical calculations indicates that the HER performance greatly depends on the type and amount of defect configurations. The optimal configuration is that three V atoms are aggregated and accompanied by abundant sulfur vacancies, in which, H atoms directly interact with Mo and V atoms to form the most stable metal-bridge structure. The on-chip measurements also confirm that the sample with high concentrations of this type of defect configuration exhibits the best catalytic performance, indicating the efficient synergy in the optimal configuration. The revealed effects of defect configurations are expected to inspire the design and regulation of high-efficiency 2D catalysts.

Coordination engineering of single-atom ruthenium in 2D MoS2 for enhanced hydrogen evolution.

This study investigates the enhancement of catalytic activity in single-atom catalysts (SACs) through coordination engineering. By introducing non-metallic atoms (X = N, O, or F) into the basal plane of MoS2 via defect engineering and subsequently anchoring hetero-metallic Ru atoms, we created 10 types of non-metal-coordinated Ru SACs (Ru-X-MoS2). Computations indicate that non-metal atom X significantly modifies the electronic structure of Ru, optimizing the hydrogen evolution reaction (HER). Across acidic, neutral, and alkaline electrolytes, Ru-X-MoS2 catalysts exhibit significantly improved HER performance compared with Ru-MoS2, even surpassing commercial Pt/C catalysts. Among these, the Ru-O-MoS2 catalyst, characterized by its asymmetrically coordinated O2-Ru-S1 active sites, demonstrates the most favorable electrocatalytic behavior and exceptional stability across all pH ranges. Consequently, single-atom coordination engineering presents a powerful strategy for enhancing SAC catalytic performance, with promising applications in various fields.

Dynamic coordination engineering of 2D PhenPtCl2 nanosheets for superior hydrogen evolution.

Exploring the dynamic structural evolution of electrocatalysts during reactions represents a fundamental objective in the realm of electrocatalytic mechanism research. In pursuit of this objective, we synthesized PhenPtCl2 nanosheets, revealing a N2-Pt-Cl2 coordination structure through various characterization techniques. Remarkably, the electrocatalytic performance of these PhenPtCl2 nanosheets for hydrogen evolution reaction (HER) surpasses that of the commercial Pt/C catalyst across the entire pH range. Furthermore, our discovery of the dynamic coordination changes occurring in the N2-Pt-Cl2 active sites during the electrocatalytic process, as clarified through in situ Raman and X-ray photoelectron spectroscopy, is particularly noteworthy. These changes transition from Phen-Pt-Cl2 to Phen-Pt-Cl and ultimately to Phen-Pt. The Phen-Pt intermediate plays a pivotal role in the electrocatalytic HER, dynamically coordinating with Cl- ions in the electrolyte. Additionally, the unsaturated, two-coordinated Pt within Phen-Pt provides additional space and electrons to enhance both H+ adsorption and H2 evolution. This research illuminates the intricate dynamic coordination evolution and structural adaptability of PhenPtCl2 nanosheets, firmly establishing them as a promising candidate for efficient and tunable electrocatalysts.

Atomic-level polarization in electric fields of defects for electrocatalysis.

The thriving field of atomic defect engineering towards advanced electrocatalysis relies on the critical role of electric field polarization at the atomic scale. While this is proposed theoretically, the spatial configuration, orientation, and correlation with specific catalytic properties of materials are yet to be understood. Here, by targeting monolayer MoS2 rich in atomic defects, we pioneer the direct visualization of electric field polarization of such atomic defects by combining advanced electron microscopy with differential phase contrast technology. It is revealed that the asymmetric charge distribution caused by the polarization facilitates the adsorption of H*, which originally activates the atomic defect sites for catalytic hydrogen evolution reaction (HER). Then, it has been experimentally proven that atomic-level polarization in electric fields can enhance catalytic HER activity. This work bridges the long-existing gap between the atomic defects and advanced electrocatalysis by directly revealing the angstrom-scale electric field polarization and correlating it with the as-tuned catalytic properties of materials; the methodology proposed here could also inspire future studies focusing on catalytic mechanism understanding and structure-property-performance relationship.

Frenkel-defected monolayer MoS2 catalysts for efficient hydrogen evolution.

Defect engineering is an effective strategy to improve the activity of two-dimensional molybdenum disulfide base planes toward electrocatalytic hydrogen evolution reaction. Here, we report a Frenkel-defected monolayer MoS2 catalyst, in which a fraction of Mo atoms in MoS2 spontaneously leave their places in the lattice, creating vacancies and becoming interstitials by lodging in nearby locations. Unique charge distributions are introduced in the MoS2 surface planes, and those interstitial Mo atoms are more conducive to H adsorption, thus greatly promoting the HER activity of monolayer MoS2 base planes. At the current density of 10 mA cm-2, the optimal Frenkel-defected monolayer MoS2 exhibits a lower overpotential (164 mV) than either pristine monolayer MoS2 surface plane (358 mV) or Pt-single-atom doped MoS2 (211 mV). This work provides insights into the structure-property relationship of point-defected MoS2 and highlights the advantages of Frenkel defects in tuning the catalytic performance of MoS2 materials.

Seamlessly Splicing Metallic Sn x Mo1- x S2 at MoS2 Edge for Enhanced Photoelectrocatalytic Performance in Microreactor.

Accurate design of the 2D metal-semiconductor (M-S) heterostructure via the covalent combination of appropriate metallic and semiconducting materials is urgently needed for fabricating high-performance nanodevices and enhancing catalytic performance. Hence, the lateral epitaxial growth of M-S Sn x Mo1- x S2/MoS2 heterostructure is precisely prepared with in situ growth of metallic Sn x Mo1- x S2 by doping Sn atoms at semiconductor MoS2 edge via one-step chemical vapor deposition. The atomically sharp interface of this heterostructure exhibits clearly distinguished performance based on a series of characterizations. The oxygen evolution photoelectrocatalytic performance of the epitaxial M-S heterostructure is 2.5 times higher than that of pure MoS2 in microreactor, attributed to the efficient electron-hole separation and rapid charge transfer. This growth method provides a general strategy for fabricating seamless M-S lateral heterostructures by controllable doping heteroatoms. The M-S heterostructures show increased carrier migration rate and eliminated Fermi level pinning effect, contributing to their potential in devices and catalytic system.

Shape-Engineered Synthesis of Atomically Thin 1T-SnS2 Catalyzed by Potassium Halides.

Shape engineering plays a crucial role in the application of two-dimensional (2D) layered metal dichalcogenide (LMD) crystalline materials in terms of physical and chemical property modulation. However, controllable growth of 1T phase tin disulfide (SnS2) with multifarious morphologies has rarely been reported and remains challenging. Herein, we report a direct synthesis of large-size, uniform, and atomically thin 1T-SnS2 with multiple morphologies by adding potassium halides via a facile chemical vapor deposition process. A variety of morphologies, i.e., from hexagon, triangle, windmill, and dendritic to coralloid, corresponding to fractal dimensions from 1.01 to 1.81 are accurately controlled by growth conditions. Moreover, the Sn concentration controls the morphology change of SnS2. The edge length of the SnS2 dendritic flake can grow larger than 500 µm in 5 min. Potassium halides can significantly reduce the surface migration barrier of the SnS2 cluster and enhance the SnS2 adhesion force with substrate to facilitate efficient high in-plane growth of monolayer SnS2 compared to sodium halides by density functional theory calculations. More branched SnS2 with higher fractal dimension provides more active sites for enhancing hydrogen evolution reactions. Importantly, we prove that potassium halides are preferable for 1T-phase LMDs structures, while sodium halides are more suitable for 2H-phase materials. The growth mechanism proposed here provides a general approach for controllable-phase synthesis of 2D LMD crystals and related heterostructures. Shape engineering of 2D materials also provides a strategy to tune LMD properties for demanding applications.