Modulating the D-Band Center of Electrocatalysts for Enhanced Water Splitting.

To tackle the global energy scarcity and environmental degradation, developing efficient electrocatalysts is essential for achieving sustainable hydrogen production via water splitting. Modulating the d-band center of transition metal electrocatalysts is an effective approach to regulate the adsorption energy of intermediates, alter reaction pathways, lower the energy barrier of the rate-determining step, and ultimately improve electrocatalytic water splitting performance. In this review, a comprehensive overview of the recent advancements in modulating the d-band center for enhanced electrocatalytic water splitting is offered. Initially, the basics of the d-band theory are discussed. Subsequently, recent modulation strategies that aim to boost electrocatalytic activity, with particular emphasis on the d-band center as a key indicator in water splitting are summarized. Lastly, the importance of regulating electrocatalytic activity through d-band center, along with the challenges and prospects for improving electrocatalytic water splitting performance by fine-tuning the transition metal d-band center, are provided.

CoPS/Co4S3 Heterojunction with Highly Exposed Active Sites and Dual-site Synergy for Effective Hydrogen Evolution Reactions.

Cobalt phosphosulphide (CoPS) has recently been recognized as a potentially effective electrocatalyst for the hydrogen evolution reaction (HER). However, there have been no research on the design of CoPS-based heterojunctions to boost their HER performance. Herein, CoPS/Co4S3 heterojunction was prepared by phosphating treatment based on defect-rich flower-like Co1-xS precursors. The high specific surface area of nanopetals, together with the heterojunction structure with inhomogeneous strain, exposes more active sites in the catalyst. The electronic structure of the catalyst is reconfigured as a result of the interfacial interactions, which promote the catalyst's ability to adsorb hydrogen and conduct electricity. The synergistic effect of the Co and S dual-site further enhance the catalytic activity. The catalyst has overpotentials of 61 and 70 mV to attain a current density of 10 mA cm-2 in acidic and alkaline media, respectively, which renders it competitive with previously reported analogous catalysts. This work proposes an effective technique for constructing transition metal phosphosulfide heterojunctions, as well as the development of an efficient HER electrocatalyst.

Multi-d Electron Synergy in LaNi1-x Cox Ru Intermetallics Boosts Electrocatalytic Hydrogen Evolution.

Despite the fact that d-band center theory links the d electron structure of transition metals to their catalytic activity, it is yet unknown how the synergistic effect of multi-d electrons impacts catalytic performance. Herein, novel LaNi1-x Cox Ru intermetallics containing 5d, 4d, and 3d electrons were prepared. In these compounds, the 5d orbital of La transfers electrons to the 4d orbital of Ru, which provides adsorption sites for H*. The 3d orbitals of Ni and Co interact with the 5d and 4d orbitals to generate an anisotropic electron distribution, which facilitates the adsorption and desorption of OH*. The synergistic effect of multi-d electrons ensures efficient catalytic activity. The optimized LaNi0.5 Co0.5 Ru has an overpotential of 43mV at 10 mA cm-2 for alkaline electrocatalytic hydrogen evolution reaction. Beyond offering a variety of new electrocatalysts, this work reveals the multi-d electron synergy in promoting catalytic reaction.

Cofactor-independent C-C bond cleavage reactions catalyzed by the AlpJ family of oxygenases in atypical angucycline biosynthesis.

Biosynthesis of atypical angucyclines involves unique oxidative B-ring cleavage and rearrangement reactions, which are catalyzed by AlpJ-family oxygenases, including AlpJ, JadG, and GilOII. Prior investigations established the essential requirement for FADH2/FMNH2 as cofactors when utilizing the quinone intermediate dehydrorabelomycin as a substrate. In this study, we unveil a previously unrecognized facet of these enzymes as cofactor-independent oxygenases when employing the hydroquinone intermediate CR1 as a substrate. The enzymes autonomously drive oxidative ring cleavage and rearrangement reactions of CR1, yielding products identical to those observed in cofactor-dependent reactions of AlpJ-family oxygenases. Furthermore, the AlpJ- and JadG-catalyzed reactions of CR1 could be quenched by superoxide dismutase, supporting a catalytic mechanism wherein the substrate CR1 reductively activates molecular oxygen, generating a substrate radical and the superoxide anion O2 •-. Our findings illuminate a substrate-controlled catalytic mechanism of AlpJ-family oxygenases, expanding the realm of cofactor-independent oxygenases. Notably, AlpJ-family oxygenases stand as a pioneering example of enzymes capable of catalyzing oxidative reactions in either an FADH2/FMNH2-dependent or cofactor-independent manner.

Highly Active Si Sites Enabled by Negative Valent Ru for Electrocatalytic Hydrogen Evolution in LaRuSi.

The discovery and identification of novel active sites are paramount for deepening the understanding of the catalytic mechanism and driving the development of remarkable electrocatalysts. Here, we reveal that the genuine active sites for the hydrogen evolution reaction (HER) in LaRuSi are Si sites, not the usually assumed Ru sites. Ru in LaRuSi has a peculiar negative valence state, which leads to strong hydrogen binding to Ru sites. Surprisingly, the Si sites have a Gibbs free energy of hydrogen adsorption that is near zero (0.063 eV). The moderate adsorption of hydrogen on Si sites during the HER process is also validated by in situ Raman analysis. Based on it, LaRuSi exhibits an overpotential of 72 mV at 10 mA cm-2 in alkaline media, which is close to the benchmark of Pt/C. This work sheds light on the recognition of real active sites and the exploration of innovative silicide HER electrocatalysts.

Selecting Hub Genes and Predicting Target Genes of microRNAs in Tuberculosis via the Bioinformatics Analysis.

Tuberculosis (TB) is the world's most prevalently infectious disease. Molecular mechanisms behind tuberculosis remain unknown. microRNA (miRNA) is involved in a wide variety of diseases. To validate the significant genes and miRNAs in the current sample, two messenger RNA (mRNA) expression profile datasets and three miRNA expression profile datasets were downloaded from the Gene Expression Omnibus (GEO) database. The differentially expressed (DE) genes (DEGs) and miRNAs (DE miRNAs) between healthy and TB patients were filtered out. Enrichment analysis was executed, and a protein-protein interaction (PPI) network was developed to understand the enrich pathways and hub genes of TB. Additionally, the target genes of miRNA were predicted and overlapping target genes were identified. We studied a total of 181 DEGs (135 downregulated and 46 upregulated genes) and two DE miRNAs (2 downregulated miRNAs) from two gene profile datasets and three miRNA profile datasets, respectively. 10 hub genes were defined based on high degree of connectivity. A PPI network's top module was constructed. The 23 DEGs identified have a significant relationship with miRNAs. 25 critically significant Gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were discovered. The detailed study revealed that, in tuberculosis, the DE miRNA and DEGs form an interaction network. The identification of novel target genes and main pathways would aid with our understanding of miRNA's function in tuberculosis progression.

Systematic characterization of chemical constituents in Mahuang decoction by UHPLC tandem linear ion trap-Orbitrap mass spectrometry coupled with feature-based molecular networking.

Comprehensive characterization of traditional Chinese medicine prescriptions has long been a hurdle due to the chemical complexity and the lack of analytical tools. Mahuang decoction is a well-known traditional Chinese medicine prescription widely used for sweating and relieving the exterior, relieving cough and asthma, but it was insufficiently chemically scrutinized. In this study, the chemical component information of Mahuang decoction was investigated by ultrahigh-performance liquid chromatography tandem linear ion trap-Orbitrap mass spectrometry. A new data processing tool, feature-based molecular networking, was introduced for grouping and elucidating the compounds. In this way, 156 chemical components were identified or tentatively characterized, including alkaloids, triterpenoid saponins, flavanone-O-glycosides, flavone-C-glycosides, and procyanidins. Thus, this research provides a solid foundation for further development of Mahuang decoction, and the adopted method is expected to be applied to other traditional Chinese medicine prescriptions.

Reversed Active Sites Boost the Intrinsic Activity of Graphene-like Cobalt Selenide for Hydrogen Evolution.

Optimizing the hydrogen adsorption Gibbs free energy (ΔGH ) of active sites is essential to improve the overpotential of the electrocatalytic hydrogen evolution reaction (HER). We doped graphene-like Co0.85 Se with sulfur and found that the active sites are reversed (from cationic Co sites to anionic S sites), which contributed to an enhancement in electrocatalytic HER performance. The optimal S-doped Co0.85 Se composite has an overpotential of 108 mV (at 10 mA cm-2 ) and a Tafel slope of 59 mV dec-1 , which exceeds other reported Co0.85 Se-based electrocatalysts. The doped S sites have much higher activity than the Co sites, with a hydrogen adsorption Gibbs free energy (ΔGH ) close to zero (0.067 eV), which reduces the reaction barrier for hydrogen production. This work provides inspiration for optimizing the intrinsic HER activity of other related transition metal chalcogenides.

Structures and physical properties of layered oxyselenides Ba(2)MO(2)Ag(2)Se(2) (M = Co, Mn).

Two new layered oxyselenides, Ba2MO2Ag2Se2 (M = Co, Mn), have been successfully synthesized via solid-state reaction. It is found that these two compounds, consisting of the infinite MO2 square planes and antifluorite-type Ag2Se2 layers separated by barium, possess new structural features while keeping I4/mmm symmetry. A detailed calculation on the discrete coordination of transition metals by oxygen in the two compounds and Ba2ZnO2Ag2Se2 revealed quite different energy landscapes. The calculated results indicate that the manganese compound favors adoption of the I4/mmm space group, while the cobalt compound could be at the boundary of the transition between the I4/mmm and Cmca phases. In Ba2CoO2Ag2Se2, the coexistence of a large barium ion and a Ag2Se2 layer expands the oxide layer significantly and results in the largest Co-O bond length in the square-planar sheet ever reported. Ba2CoO2Ag2Se2 is near-stoichiometric, whereas Ba2MnO2Ag2Se2 contains 7% silver vacancies, which is explained by the mixed valence of the manganese ion between 2+ and 3+. In Ba2CoO2Ag2Se2, the zero-field-cooled and field-cooled susceptibilities bifurcate at 159 K, located between two antiferromagnetic (AFM) transitions. Meanwhile, Ba2MnO2Ag2Se2 shows high-temperature Curie-Weiss behavior, followed by a low-temperature AFM transition with TN = 32 K. They both exhibit semiconducting behavior with resisitivities of about 10(5)Ω cm at room temperature. The optical band gaps are determined to be 1.49 and 1.18 eV for Ba2CoO2Ag2Se2 and Ba2MnO2Ag2Se2, respectively. Band structure calculations reveal that Ba2CoO2Ag2Se2 is a direct-gap semiconductor, with a calculated band gap of 1.147 eV; however, Ba2MnO2Ag2Se2 failed to reproduce the semiconducting behavior within an A-type AFM model.

Lattice Defects and Electronic Modulation of Flower-Like Zn3 In2 S6 Promote Photocatalytic Degradation of Multiple Antibiotics.

Photocatalysis is an effective technique to remove antibiotic residues from aquatic environments. Typical metal sulfides like Zn3 In2 S6 have been applied to a wide range of photocatalytic applications. However, there are currently no readily accessible methods to increase its antibiotic-degrading activity. Here, a facile hydrothermal approach is developed for the preparation of flower-like Zn3 In2 S6 with tunable sulfur lattice defects. Photogenerated carriers can be separated and transferred more easily when there is an adequate amount of lattice defects. Moreover, lattice defect-induced electronic modulation enhances light utilization and adsorption properties. The modified Zn3 In2 S6 demonstrates outstanding photocatalytic degradation activity for levofloxacin, ofloxacin, and tetracycline. This work sheds light on exploring metal sulfides with sulfur lattice defects for enhancing photocatalytic activity.

Electron transfer at the heterojunction interface of CoP/MoS2 for efficient electrocatalytic hydrogen evolution reaction.

Modulating the electronic states of electrocatalysts is critical for achieving efficient hydrogen evolution reaction (HER). However, how to develop electrocatalysts with superior electronic states is an urgent challenge that must be addressed. Herein, we prepared the CoP/MoS2 heterojunction with a microsphere morphology consisting of thin nanosheets using a facile two-step method. The catalyst's ultrathin nanosheet structure not only provides an extensive surface area for exposing active sites, but it also enables ion transport and bubble release. Electron transfer occurs between CoP and MoS2, optimizing the heterojunction's charge distribution and enhancing the intermediates' adsorption capabilities. As a result, the CoP/MoS2 heterojunction exhibits outstanding electrocatalytic hydrogen evolution activity with an overpotential of only 88 mV at a current density of 10 mA cm-2, which exceeds both the sulfide heterojunction Co9S8/MoS2 and the phosphide heterojunction CoP/CoMoP2. The experimental results and DFT calculation results show that the former has stronger synergistic effects and higher HER activity. This work sheds light on the exploration of efficient heterojunction electrocatalysts with excellent electronic structures.

An in situ phase transformation induced mesoporous heterointerface for the alkaline hydrogen evolution reaction.

The phase structure of a catalyst plays a crucial role in determining the catalytic activity. In this study, a facile phosphorization process is employed to achieve the in situ phase transformation from single-phase Co3O4 to CoO/CoP hybrid phases. Characterization techniques, including XRD, BET, SEM, and TEM, confirm the retention of the mesoporous nature during the phase transformation, forming porous CoO/CoP heterointerfaces. Strong charge transfer is observed across the CoO/CoP heterointerface, indicating a robust interaction between the hybrid phases. The CoO/CoP hybrid exhibits significantly enhanced catalytic activity for the alkaline hydrogen evolution reaction (HER) compared to pristine Co3O4. Density Functional Theory (DFT) calculations reveal that the elimination of the band gap in the spin-down band of Co in CoO/CoP contributes to the observed high HER activity. The findings highlight the potential of CoO/CoP hybrids as efficient catalysts for HER, and contribute to the advancement of catalyst design for sustainable energy applications.

Van der Waals phase transition investigation toward high-voltage layered cathodes.

High-voltage phase transition constitutes the major barrier to accessing high energy density in layered cathodes. However, questions remain regarding the origin of phase transition, because the interlayer weak bonding features cannot get an accurate description by experiments. Here, we determined van der Waals (vdW) interaction (vdWi) in LixCoO2 via visualizing its electron density, elucidating the origin of O3─O1 phase transition. The charge around oxygen is distorted by the increasing Co─O covalency. The charge distortion causes the difference of vdW gap between O3 and O1 phases, verified by a gap corrected vdW equation. In a high charging state, excessive covalency breaks the vdW gap balance, driving the O3 phase toward a stable O1 one. This interpretation of vdWi-dominated phase transition can be applied to other layered materials, as shown by a map regarding degree of covalence. Last, we introduce the cationic potential to provide a solution for designing high-voltage layered cathodes.

Superconducting phases in potassium-intercalated iron selenides.

The ubiquitous coexistence of majority insulating 245 phases and minority superconducting (SC) phases in A(x)Fe(2-y)Se(2) (A = K, Cs, Rb, Tl/Rb, Tl/K) formed by high-temperature routes makes pure SC phases highly desirable for studying the intrinsic properties of this SC family. Here we report that there are at least two pure SC phases, K(x)Fe(2)Se(2)(NH(3))(y) (x ≈ 0.3 and 0.6), determined mainly by potassium concentration in the K-intercalated iron selenides formed via the liquid ammonia route. K(0.3)Fe(2)Se(2)(NH(3))(0.47) corresponds to the 44 K phase with lattice constant c = 15.56(1) Å and K(0.6)Fe(2)Se(2)(NH(3))(0.37) to the 30 K phase with c = 14.84(1) Å. With higher potassium doping, the 44 K phase can be converted into the 30 K phase. NH(3) has little, if any, effect on superconductivity. Thus, the conclusions should apply to both K(0.3)Fe(2)Se(2) and K(0.6)Fe(2)Se(2) SC phases. K(0.3)Fe(2)Se(2)(NH(3))(0.47) and K(0.6)Fe(2)Se(2)(NH(3))(0.37) stand out among known superconductors as their structures are stable only at particular potassium doping levels, and hence the variation of T(c) with doping is not dome-like.

New layered iron sulfide NaFe(1.6)S2: synthesis and characterization.

Na was intercalated between [Fe2S2] layers for the first time, giving a novel compound NaFe(1.6)S2. This material adopts a CaAl2Si2-type structure with ~20% iron vacancies and represents the first layered compound in a ternary Na-M-X (M = Fe, Co, Ni; X = S, Se) system. First-principles calculations reveal that phonon dynamics is an important factor for it to prefer the CaAl2Si2-type rather than the ThCr2Si2-type structure. It features a magnetic transition at 205 K and is a narrow-band-gap semiconductor.

Construction of Cobalt Molybdenum Diselenide Three-phase Heterojunctions for Electrocatalytic Hydrogen Evolution in Acid Medium.

Molybdenum diselenide and cobalt diselenide have been commonly implemented in electrocatalytic hydrogen evolution reaction (HER). However, there have been few research on the creation of their three-phase heterojunctions and the associated HER process. Herein, we constructed a three-phase heterostructure sample consisting of orthorhombic CoSe2 , cubic CoSe2 and MoSe2 and we investigated its HER performance. The sample shows microsphere morphology composed of nanosheets with interfacial interactions between the components. It possesses an overpotential of -136 mV at -10 mA cm-2 in acid medium, which is superior to that of single component and most two-phase heterostructures. Especially, the overpotential at -200 mA cm-2 is smaller than that of Pt/C. The excellent performance can be attributed to the d-orbital upshift of the Co active sites due to charge redistribution between the three-phase heterojunction and the optimization of the hydrogen free energy. This work provides inspiration for exploring the application of other multi-component heterojunctions in electrocatalytic hydrogen evolution.

Charge Redistribution of Co9S8/MoS2 Heterojunction Microsphere Enhances Electrocatalytic Hydrogen Evolution.

The electrocatalytic hydrogen evolution activity of transition metal sulfide heterojunctions are significantly increased when compared with that of a single component, but the mechanism behind the performance enhancement and the preparation of catalysts with specific morphologies still need to be explored. Here, we prepared a Co9S8/MoS2 heterojunction with microsphere morphology consisting of thin nanosheets using a facile two-step method. There is electron transfer between the Co9S8 and MoS2 of the heterojunction, thus realizing the redistribution of charge. After the formation of the heterojunction, the density of states near the Fermi surface increases, the d-band center of the transition metal moves downward, and the adsorption of both water molecules and hydrogen by the catalyst are optimized. As a result, the overpotential of Co9S8/MoS2 is superior to that of most relevant electrocatalysts reported in the literature. This work provides insight into the synergistic mechanisms of heterojunctions and their morphological regulation.

Nontrivial Topological Surface States in Ru3 Sn7 toward Wide pH-Range Hydrogen Evolution Reaction.

Nontrivial topological surface states (TSSs), which possess extraordinary carrier mobility and are protected by the bulk symmetry, have emerged as an innovative platform to search for efficient electrocatalysts toward hydrogen evolution reaction (HER). Here, a Sn-based nontrivial metal Ru3 Sn7 is prepared using electrical arc melting method. The results indicate that the (001) crystal family of Ru3 Sn7 possesses nontrivial TSSs with linear dispersion relation and large nontrivial energy window. Experimental and theoretical results demonstrate that nontrivial TSSs of Ru3 Sn7 can significantly boost charge transfer kinetics and optimize adsorption of hydrogen intermediates due to bulk symmetry-protected band structures. As expected, nontrivial Ru3 Sn7 exhibits superior HER activity to Ru, Pt/C, and trivial counterparts (e.g., Ru2 Sn3 , IrSn2 , and Rh3 Sn2 ) with higher ratios of noble metals. Furthermore, the wide pH-range activity of topologically nontrivial Ru3 Sn7 implies the robustness of its TSSs against pH variation during the HER. These findings provide a promising approach to the rational design of topologically nontrivial metals as highly efficient electrocatalysts.

Phosphorus-modified cobalt single-atom catalysts loaded on crosslinked carbon nanosheets for efficient alkaline hydrogen evolution reaction.

Efficient and low-cost transition metal single-atom catalysts (TMSACs) for hydrogen evolution reaction (HER) have been recognized as research hotspots recently with advances in delivering good catalytic activity without noble metals. However, the high-cost complex preparation of TMSACs and insufficient stability limited their practical applications. Herein, a simple top-down pyrolysis approach to obtain P-modified Co SACs loaded on the crosslinked defect-rich carbon nanosheets was introduced for alkaline hydrogen evolution, where Co atoms are locally confined before pyrolysis to prevent aggregation. Thereby, the abundant defects and the unsaturated coordination formed during the pyrolysis significantly improved the stability of the monatomic structure and reduced the reaction barrier. Furthermore, the synergy between cobalt atoms and phosphorus atoms was established to optimize the decomposition process of water molecules, which delivers the key to promoting the slow reaction kinetics of alkaline HER. As the result, the cobalt SAC exhibited excellent catalytic activity and stability for alkaline HER, with overpotentials of 70 mV and 192 mV at current densities of -10 mA cm-2 and -100 mA cm-2, respectively.

Integrated bioinformatic analyses investigate macrophage-M1-related biomarkers and tuberculosis therapeutic drugs.

Tuberculosis (TB) is a common infectious disease linked to host genetics and the innate immune response. It is vital to investigate new molecular mechanisms and efficient biomarkers for Tuberculosis because the pathophysiology of the disease is still unclear, and there aren't any precise diagnostic tools. This study downloaded three blood datasets from the GEO database, two of which (GSE19435 and 83456) were used to build a weighted gene co-expression network for searching hub genes associated with macrophage M1 by the CIBERSORT and WGCNA algorithms. Furthermore, 994 differentially expressed genes (DEGs) were extracted from healthy and TB samples, four of which were associated with macrophage M1, naming RTP4, CXCL10, CD38, and IFI44. They were confirmed as upregulation in TB samples by external dataset validation (GSE34608) and quantitative real-time PCR analysis (qRT-PCR). CMap was used to predict potential therapeutic compounds for tuberculosis using 300 differentially expressed genes (150 downregulated and 150 upregulated genes), and six small molecules (RWJ-21757, phenamil, benzanthrone, TG-101348, metyrapone, and WT-161) with a higher confidence value were extracted. We used in-depth bioinformatics analysis to investigate significant macrophage M1-related genes and promising anti-Tuberculosis therapeutic compounds. However, more clinical trials were necessary to determine their effect on Tuberculosis.