Toxicology and safety study of L-tryptophan and its impurities for use in broiler feed.

L-tryptophan has been utilized as a feed additive in animal nutrition to improve growth performance, as well as a dietary supplement to alleviate various emotional symptoms in humans. Despite its benefits, concerns regarding its safety arose following the outbreak of eosinophilia-myalgia syndrome (EMS) among individuals who consumed L-tryptophan. The causative material of EMS was determined to be not L-tryptophan itself, but rather L-tryptophan impurities resulting from a specific manufacturing process. To investigate the effect of L-tryptophan and its impurities on humans who consume meat products derived from animals that were fed L-tryptophan and its impurities, an animal study involving broiler chickens was conducted. The animals in test groups were fed diet containing 0.065%-0.073% of L-tryptophan for 27 days. This study aimed to observe the occurrence of toxicological or EMS-related symptoms and analyze the residues of L-tryptophan impurities in meat products. The results indicated that there was no evidence of adverse effects associated with the test substance in the investigated parameters. Furthermore, most of the consumed EMS-causing L-tryptophan impurities did not remain in the meat of broiler chickens. Thus, this study demonstrated the safety of L-tryptophan and some of its impurities as a feed additive.

Toxicology and safety study of L-tryptophan and its impurities for use in swine.

L-tryptophan, an essential amino acid for physiological processes, metabolism, development, and growth of organisms, is widely utilized in animal nutrition and human health as a feed additive and nutritional supplement, respectively. Despite its known benefits, safety concerns have arisen due to an eosinophilia-myalgia syndrome (EMS) outbreak linked to L-tryptophan consumed by humans. Extensive research has established that the EMS outbreak was caused by an L-tryptophan product that contained certain impurities. Therefore, safety validations are imperative to endorse the use of L-tryptophan as a supplement or a feed additive. This study was conducted in tertiary hybrid [(Landrace × Yorkshire) × Duroc] pigs to assess general toxicity and potential risks for EMS-related symptoms associated with L-tryptophan used as a feed additive. Our investigation elucidated the relationship between L-tryptophan and EMS in swine. No mortalities or clinical signs were observed in any animals during the administration period, and the test substance did not induce toxic effects. Hematological analysis and histopathological examination revealed no changes in EMS-related parameters, such as eosinophil counts, lung lesions, skin lesions, or muscle atrophy. Furthermore, no test substance-related changes occurred in other general toxicological parameters. Through analyzing the tissues and organs of swine, most of the L-tryptophan impurities that may cause EMS were not retained. Based on these findings, we concluded that incorporating L-tryptophan and its impurities into the diet does not induce EMS in swine. Consequently, L-tryptophan may be used as a feed additive throughout all growth stages of swine without safety concerns.

Electrosorption Integrated with Bipolar Membrane Water Dissociation: A Coupled Approach to Chemical-free Boron Removal.

Boron removal from aqueous solutions has long persisted as a technological challenge, accounting for a disproportionately large fraction of the chemical and energy usage in seawater desalination and other industrial processes like lithium recovery. Here, we introduce a novel electrosorption-based boron removal technology with the capability to overcome the limitations of current state-of-the-art methods. Specifically, we incorporate a bipolar membrane (BPM) between a pair of porous carbon electrodes, demonstrating a synergized BPM-electrosorption process for the first time. The ion transport and charge transfer mechanisms of the BPM-electrosorption system are thoroughly investigated, confirming that water dissociation in the BPM is highly coupled with electrosorption of anions at the anode. We then demonstrate effective boron removal by the BPM-electrosorption system and verify that the mechanism for boron removal is electrosorption, as opposed to adsorption on the carbon electrodes or in the BPM. The effect of applied voltage on the boron removal performance is then evaluated, revealing that applied potentials above ∼1.0 V result in a decline in process efficiency due to the increased prevalence of detrimental Faradaic reactions at the anode. The BPM-electrosorption system is then directly compared with flow-through electrosorption, highlighting key advantages of the process with regard to boron sorption capacity and energy consumption. Overall, the BPM-electrosorption shows promising boron removal capability, with a sorption capacity >4.5 µmol g-C-1 and a corresponding specific energy consumption of <2.5 kWh g-B-1.

Revisiting the Oxidizing Capacity of the Periodate-H2O2 Mixture: Identification of the Primary Oxidants and Their Formation Mechanisms.

This study reexamined the mechanisms for oxidative organic degradation by the binary mixture of periodate and H2O2 (PI/H2O2) that was recently identified as a new advanced oxidation process. Our findings conflicted with the previous claims that (i) hydroxyl radical (•OH) and singlet oxygen (1O2) contributed as the primary oxidants, and (ii) •OH production resulted from H2O2 reduction by superoxide radical anion (O2•-). PI/H2O2 exhibited substantial oxidizing capacity at pH < 5, decomposing organics predominantly by •OH. The likelihood of a switch in the major oxidant under varying pH conditions was revealed. IO4- as the major PI form under acidic conditions underwent one-electron reduction by H2O2 to yield radical intermediates, whereas H2I2O104- preferentially occurring at pH > 7 caused 1O2 generation through two-electron oxidation of H2O2. PI reduction by O2•- was suggested to be a key reaction in •OH production, on the basis of the electron paramagnetic resonance detection of methyl radicals in the dimethyl sulfoxide solutions containing PI and KO2, and the absence of deuterated and 18O-labeled hydroxylated intermediates during PI activation using D2O and H218O2. Finally, simple oxyanion mixing subsequent to electrochemical PI and H2O2 production achieved organic oxidation, enabling a potential strategy to minimize the use of chemicals.

Electrochemical Oxidation-Membrane Distillation Hybrid Process: Utilizing Electric Resistance Heating for Distillation and Membrane Defouling through Thermal Activation of Anodically Formed Persulfate.

This study reports distillation-based salt removal by Ohmic heating in a hybrid process, in which electrochemical oxidation (EO) and direct contact membrane distillation (DCMD) are performed sequentially. In addition to anodically destructing the organics, the hybrid process also separated the sulfate-based electrolytes from treated water through distillation, without consuming external energy, owing to the temperature of the aqueous sulfate solution being elevated to 70 °C via resistive heating. The hybrid process treated organic compounds in a nonselective fashion, whereas DCMD alone did not completely reject (semi)volatile organics. Integrating EO with DCMD made the hybrid process resistant toward the wetting phenomenon; the process exhibited a steady distillate flux and salt rejection as the initial loading of amphiphilic sodium dodecyl sulfate was increased to 0.3 mM. Anodic persulfate formation from the sulfate and Ohmic heating caused an in situ yield of the sulfate radical in the feed solution; this eliminated membrane fouling, according to the observation that the water flux, which was drastically reduced upon adding alginate, was recovered immediately after an electric current was applied. The hybrid process concurrently decomposed spiked organics and removed naturally present inorganic ions in actual flue gas desulfurization wastewater, without an external supply of electrolyte and heat energy.

Sequential Combination of Electro-Fenton and Electrochemical Chlorination Processes for the Treatment of Anaerobically-Digested Food Wastewater.

A two-stage sequential electro-Fenton (E-Fenton) oxidation followed by electrochemical chlorination (EC) was demonstrated to concomitantly treat high concentrations of organic carbon and ammonium nitrogen (NH4+-N) in real anaerobically digested food wastewater (ADFW). The anodic Fenton process caused the rapid mineralization of phenol as a model substrate through the production of hydroxyl radical as the main oxidant. The electrochemical oxidation of NH4+ by a dimensionally stable anode (DSA) resulted in temporal concentration profiles of combined and free chlorine species that were analogous to those during the conventional breakpoint chlorination of NH4+. Together with the minimal production of nitrate, this confirmed that the conversion of NH4+ to nitrogen gas was electrochemically achievable. The monitoring of treatment performance with varying key parameters (e.g., current density, H2O2 feeding rate, pH, NaCl loading, and DSA type) led to the optimization of two component systems. The comparative evaluation of two sequentially combined systems (i.e., the E-Fenton-EC system versus the EC-E-Fenton system) using the mixture of phenol and NH4+ under the predetermined optimal conditions suggested the superiority of the E-Fenton-EC system in terms of treatment efficiency and energy consumption. Finally, the sequential E-Fenton-EC process effectively mineralized organic carbon and decomposed NH4+-N in the real ADFW without external supply of NaCl.

Iron particle-integrated anammox granules in baffled reactor: Enhanced settling property and nitrogen removal performance.

This study evaluates iron particle-integrated anammox granules (IP-IAGs) to enhance wastewater treatment efficiency. The IP-IAGs resulted in notable improvements in settleability and nitrogen removal. The settling velocity of IP-IAGs increased by 17.91 % to 2.92 ± 0.20 cm/s, and the total nitrogen removal efficiency in batch mode improved by 6.82 %. These changes indicate enhanced biological activity for effective treatment. In continuous operation, the IP-IAGs reactor showed no accumulation of nitrite until 40 d, reaching a peak nitrogen removal rate (NRR) of 1.54 kg-N/m3·d and a nitrogen removal efficiency of 82.61 %. Furthermore, a partial nitritation-anammox reactor that treated anaerobic digestion effluent achieved a NRR of 1.41 ± 0.09 kg-N/m3·d, proving the applicability of IP-IAGs in real wastewater conditions. These results underscore the potential of IP-IAGs to enhance the efficiency and stability of anammox-based processes, marking a significant advancement in environmental engineering for wastewater treatment.

Safety concerns regarding impurities in L-Tryptophan associated with eosinophilia myalgia syndrome.

L-tryptophan is one of the essential amino acids in humans and across the animal kingdom. It has been widely used as a feed additive for domestic animals and is also administered through dietary supplements in humans. Safety concerns have been raised however since a disease known as eosinophilia-myalgia syndrome (EMS) was reported to be related to L-tryptophan supplements. EMS is a rare condition characterized by inflammation in various organ systems including the muscles, skin, and lungs. Through several studies, it has been speculated that the six components generated during the process of L-tryptophan synthesis are related to the induction of EMS. In this review, we discuss the history of EMS and its controversial correlation with L-tryptophan use reported in several studies. Many in vitro and in vivo studies have been conducted to assess the putative correlation between impurities in L-tryptophan preparations and EMS, but no clear and convincing conclusions have been drawn so far.

Investigation of black phosphorus anodic catalyst for electrolysis: Degradation of organics via a perchlorate-free oxidant activation.

This study investigated the potential of a novel fabricated black phosphorus (BP) nanoparticle electrode as an alternative to noble metal-based catalysts for application in electrolysis. The BP electrode was compared with other conventional catalysts (boron-doped diamond (BDD) and a dimensional stable electrode (DSA)) under different electrolyte conditions for the generation of specific oxidants (e.g., OH•, HOCl, OCl-, SO4• -) in the bulk phase during electrolysis. In the presence of sulfate-based electrolyte, results on the electrochemical oxidation showed that the BP not only resulted in an 8-fold increase in the current efficiency compared to DSA, but also reduced energy consumptions by approximately 30-fold. Moreover, electrolysis using certain electrodes (i.e., BDD) under high current densities in the presence of chlorine-based electrolyte has been reported to be hazardous to the water system due to the generation of toxic chlorine oxyanions (i.e., perchlorate), which necessitates the operation of a post-treatment process. Likewise, application of the BDD electrode was confirmed to produce perchlorate under high current densities, while no by-product was generated by electrolysis with the BP electrode. Finally, multiple degradation pathways for selective water treatment was monitored under oxidation with the BP electrode. To the best of our knowledge, this study is the first to apply the novel fabricated BP electrode as the anodic catalyst for the treatment of a water system.

Safety evaluation of dried L-tryptophan fermentation product in Sprague-Dawley rats.

The subchronic toxicity of oral L-tryptophan produced by fermentation with metabolically engineered Corynebacterium glutamicum was evaluated in Sprague-Dawley rats. Doses of 0, 500, 1000, and 2000 mg/kg/day were administered to groups of 10 male and 10 female rats for 90 days. For the groups administered 0 and 2000 mg/kg/day, an additional 5 male and 5 female rats were tested as a recovery group. No adverse effects associated with the test substance were observed in all rats during the 90-day administration of the product, irrespective of dose, and at 4 weeks of recovery at dosages of 0 and 2000 mg/kg/day. Furthermore, histochemical and immunohistochemical analyses for L-tryptophan-associated eosinophilia-myalgia syndrome (EMS) did not reveal significant changes in both sexes of groups administered 0 or 2000 mg/kg/day. Based on these results, it could be concluded that there were no significant adverse effects related to the test substance in all animals; therefore, dried L-tryptophan fermentation product can be used as feed additive material.