Cryo-EM analysis of a domain antibody bound rotary ATPase complex.

The bacterial A/V-type ATPase/synthase rotary motor couples ATP hydrolysis/synthesis with proton translocation across biological membranes. The A/V-type ATPase/synthase from Thermus thermophilus has been extensively studied both structurally and functionally for many years. Here we provide an 8.7Å resolution cryo-electron microscopy 3D reconstruction of this complex bound to single-domain antibody fragments, small monomeric antibodies containing just the variable heavy domain. Docking of known structures into the density revealed the molecular orientation of the domain antibodies, suggesting that structure determination of co-domain antibody:protein complexes could be a useful avenue for unstable or smaller proteins. Although previous studies suggested that the presence of fluoroaluminate in this complex could change the rotary state of this enzyme, we observed no gross structural rearrangements under these conditions.

The nuclease domain of the SPP1 packaging motor coordinates DNA cleavage and encapsidation.

The large terminase subunit is a central component of the genome packaging motor from tailed bacteriophages and herpes viruses. This two-domain enzyme has an N-terminal ATPase activity that fuels DNA translocation during packaging and a C-terminal nuclease activity required for initiation and termination of the packaging cycle. Here, we report that bacteriophage SPP1 large terminase (gp2) is a metal-dependent nuclease whose stability and activity are strongly and preferentially enhanced by Mn(2+) ions. Mutation of conserved residues that coordinate Mn(2+) ions in the nuclease catalytic site affect the metal-induced gp2 stabilization and impair both gp2-specific cleavage at the packaging initiation site pac and unspecific nuclease activity. Several of these mutations block also DNA encapsidation without affecting ATP hydrolysis or gp2 C-terminus binding to the procapsid portal vertex. The data are consistent with a mechanism in which the nuclease domain bound to the portal switches between nuclease activity and a coordinated action with the ATPase domain for DNA translocation. This switch of activities of the nuclease domain is critical to achieve the viral chromosome packaging cycle.

Structural basis for DNA recognition and loading into a viral packaging motor.

Genome packaging into preformed viral procapsids is driven by powerful molecular motors. The small terminase protein is essential for the initial recognition of viral DNA and regulates the motor's ATPase and nuclease activities during DNA translocation. The crystal structure of a full-length small terminase protein from the Siphoviridae bacteriophage SF6, comprising the N-terminal DNA binding, the oligomerization core, and the C-terminal ß-barrel domains, reveals a nine-subunit circular assembly in which the DNA-binding domains are arranged around the oligomerization core in a highly flexible manner. Mass spectrometry analysis and four further crystal structures show that, although the full-length protein exclusively forms nine-subunit assemblies, protein constructs missing the C-terminal ß-barrel form both nine-subunit and ten-subunit assemblies, indicating the importance of the C terminus for defining the oligomeric state. The mechanism by which a ring-shaped small terminase oligomer binds viral DNA has not previously been elucidated. Here, we probed binding in vitro by using EPR and surface plasmon resonance experiments, which indicated that interaction with DNA is mediated exclusively by the DNA-binding domains and suggested a nucleosome-like model in which DNA binds around the outside of the protein oligomer.

The putative small terminase from the thermophilic dsDNA bacteriophage G20C is a nine-subunit oligomer.

The assembly of double-stranded DNA bacteriophages is dependent on a small terminase protein that normally plays two important roles. Firstly, the small terminase protein specifically recognizes viral DNA and recruits the large terminase protein, which makes the initial cut in the dsDNA. Secondly, once the complex of the small terminase, the large terminase and the DNA has docked to the portal protein, and DNA translocation into a preformed empty procapsid has begun, the small terminase modulates the ATPase activity of the large terminase. Here, the putative small terminase protein from the thermostable bacteriophage G20C, which infects the Gram-negative eubacterium Thermus thermophilus, has been produced, purified and crystallized. Size-exclusion chromatography-multi-angle laser light scattering data indicate that the protein forms oligomers containing nine subunits. Crystals diffracting to 2.8 Å resolution have been obtained. These belonged to space group P212121, with unit-cell parameters a = 94.31, b = 125.6, c = 162.8 Å. The self-rotation function and Matthews coefficient calculations are consistent with the presence of a nine-subunit oligomer in the asymmetric unit.

Recombinant portal protein from Staphylococcus epidermidis bacteriophage CNPH82 is a 13-subunit oligomer.

The portal protein cn3 of bacteriophage CNPH82 is predicted to serve as a gateway for translocation of viral genome into preformed pro-capsid, like portal proteins from other double-stranded DNA tailed bacteriophages. The host of bacteriophage CNPH82 is the opportunistic human pathogenic bacterium Staphylococcus epidermidis, a major cause of nosocomial infections. The portal protein of this phage has been cloned, overexpressed and purified. Size-exclusion chromatography-multi-angle laser light scattering analysis has indicated that the portal protein contains ∼13 subunits. Crystals of the portal protein, diffracting to 4.2 Å, have been obtained. These crystals belong to the space group C222(1) with the unit-cell parameters of a = 252.4, b = 367.0, c = 175.5 Å. The self-rotation function revealed the presence of a single 13-subunit oligomer in the asymmetric unit.

Structural basis for the nuclease activity of a bacteriophage large terminase.

The DNA-packaging motor in tailed bacteriophages requires nuclease activity to ensure that the genome is packaged correctly. This nuclease activity is tightly regulated as the enzyme is inactive for the duration of DNA translocation. Here, we report the X-ray structure of the large terminase nuclease domain from bacteriophage SPP1. Similarity with the RNase H family endonucleases allowed interactions with the DNA to be predicted. A structure-based alignment with the distantly related T4 gp17 terminase shows the conservation of an extended beta-sheet and an auxiliary beta-hairpin that are not found in other RNase H family proteins. The model with DNA suggests that the beta-hairpin partly blocks the active site, and in vivo activity assays show that the nuclease domain is not functional in the absence of the ATPase domain. Here, we propose that the nuclease activity is regulated by movement of the beta-hairpin, altering active site access and the orientation of catalytically essential residues.

Structural plasticity underpins promiscuous binding of the prosurvival protein A1.

Apoptotic pathways are regulated by protein-protein interactions. Interaction of the BH3 domains of proapoptotic Bcl-2 family proteins with the hydrophobic groove of prosurvival proteins is critical. Whereas some BH3 domains bind in a promiscuous manner, others exhibit considerable selectivity and the sequence characteristics that distinguish these activities are unclear. In this study, crystal structures of complexes between the prosurvival protein A1 and the BH3 domains from Puma, Bmf, Bak, and Bid have been solved. The structure of A1 is similar to that of other prosurvival proteins, although features, such as an acidic patch in the binding groove, may allow specific therapeutic modulation of apoptosis. Significant conformational plasticity was observed in the intermolecular interactions and these differences explain some of the variation in affinity. This study, in combination with published data, suggests that interactions between conserved residues demarcate optimal binding.

The Nucleosome Remodeling and Deacetylase Complex Has an Asymmetric, Dynamic, and Modular Architecture.

The nucleosome remodeling and deacetylase (NuRD) complex is essential for metazoan development but has been refractory to biochemical analysis. We present an integrated analysis of the native mammalian NuRD complex, combining quantitative mass spectrometry, cross-linking, protein biochemistry, and electron microscopy to define the architecture of the complex. NuRD is built from a 2:2:4 (MTA, HDAC, and RBBP) deacetylase module and a 1:1:1 (MBD, GATAD2, and Chromodomain-Helicase-DNA-binding [CHD]) remodeling module, and the complex displays considerable structural dynamics. The enigmatic GATAD2 controls the asymmetry of the complex and directly recruits the CHD remodeler. The MTA-MBD interaction acts as a point of functional switching, with the transcriptional regulator PWWP2A competing with MBD for binding to the MTA-HDAC-RBBP subcomplex. Overall, our data address the long-running controversy over NuRD stoichiometry, provide imaging of the mammalian NuRD complex, and establish the biochemical mechanism by which PWWP2A can regulate NuRD composition.

Expression, purification, crystallization and preliminary X-ray studies of the TAN1 orthologue from Methanothermobacter thermautotrophicus.

MTH909 is the Methanothermobacter thermautotrophicus orthologue of Saccharomyces cerevisiae TAN1, which is required for N(4)-acetylcytidine formation in tRNA. The protein consists of an N-terminal near-ferredoxin-like domain and a C-terminal THUMP domain. Unlike most other proteins containing the THUMP domain, TAN1 lacks any catalytic domains and has been proposed to form a complex with a catalytic protein that is capable of making base modifications. MTH909 has been cloned, overexpressed and purified. The molecule exists as a monomer in solution. X-ray data were collected to 2.85 A resolution from a native crystal belonging to space group P6(1)22 (or P6(5)22), with unit-cell parameters a = 69.9, c = 408.5 A.

Cryo-EM structures of the autoinhibited E. coli ATP synthase in three rotational states.

A molecular model that provides a framework for interpreting the wealth of functional information obtained on the E. coli F-ATP synthase has been generated using cryo-electron microscopy. Three different states that relate to rotation of the enzyme were observed, with the central stalk's ε subunit in an extended autoinhibitory conformation in all three states. The Fo motor comprises of seven transmembrane helices and a decameric c-ring and invaginations on either side of the membrane indicate the entry and exit channels for protons. The proton translocating subunit contains near parallel helices inclined by ~30° to the membrane, a feature now synonymous with rotary ATPases. For the first time in this rotary ATPase subtype, the peripheral stalk is resolved over its entire length of the complex, revealing the F1 attachment points and a coiled-coil that bifurcates toward the membrane with its helices separating to embrace subunit a from two sides.

Structural and Functional Insights into the Evolution and Stress Adaptation of Type II Chaperonins.

Chaperonins are essential biological complexes assisting protein folding in all kingdoms of life. Whereas homooligomeric bacterial GroEL binds hydrophobic substrates non-specifically, the heterooligomeric eukaryotic CCT binds specifically to distinct classes of substrates. Sulfolobales, which survive in a wide range of temperatures, have evolved three different chaperonin subunits (α, ß, γ) that form three distinct complexes tailored for different substrate classes at cold, normal, and elevated temperatures. The larger octadecameric ß complexes cater for substrates under heat stress, whereas smaller hexadecameric αß complexes prevail under normal conditions. The cold-shock complex contains all three subunits, consistent with greater substrate specificity. Structural analysis using crystallography and electron microscopy reveals the geometry of these complexes and shows a novel arrangement of the α and ß subunits in the hexadecamer enabling incorporation of the γ subunit.

Trp RNA-binding attenuation protein: modifying symmetry and stability of a circular oligomer.

BACKGROUND: Subunit number is amongst the most important structural parameters that determine size, symmetry and geometry of a circular protein oligomer. The L-tryptophan biosynthesis regulator, TRAP, present in several Bacilli, is a good model system for investigating determinants of the oligomeric state. A short segment of C-terminal residues defines whether TRAP forms an 11-mer or 12-mer assembly. To understand which oligomeric state is more stable, we examine the stability of several wild type and mutant TRAP proteins. METHODOLOGY/PRINCIPAL FINDINGS: Among the wild type B. stearothermophilus, B. halodurans and B. subtilis TRAP, we find that the former is the most stable whilst the latter is the least. Thermal stability of all TRAP is shown to increase with L-tryptophan concentration. We also find that mutant TRAP molecules that are truncated at the C-terminus - and hence induced to form 12-mers, distinct from their 11-mer wild type counterparts--have increased melting temperatures. We show that the same effect can be achieved by a point mutation S72N at a subunit interface, which leads to exclusion of C-terminal residues from the interface. Our findings are supported by dye-based scanning fluorimetry, CD spectroscopy, and by crystal structure and mass spectrometry analysis of the B. subtilis S72N TRAP. CONCLUSIONS/SIGNIFICANCE: We conclude that the oligomeric state of a circular protein can be changed by introducing a point mutation at a subunit interface. Exclusion (or deletion) of the C-terminus from the subunit interface has a major impact on properties of TRAP oligomers, making them more stable, and we argue that the cause of these changes is the altered oligomeric state. The more stable TRAP oligomers could be used in potential applications of TRAP in bionanotechnology.

How to change the oligomeric state of a circular protein assembly: switch from 11-subunit to 12-subunit TRAP suggests a general mechanism.

BACKGROUND: Many critical cellular functions are performed by multisubunit circular protein oligomers whose internal geometry has evolved to meet functional requirements. The subunit number is arguably the most critical parameter of a circular protein assembly, affecting the internal and external diameters of the assembly and often impacting on the protein's function. Although accurate structural information has been obtained for several circular proteins, a lack of accurate information on alternative oligomeric states has prevented engineering such transitions. In this study we used the bacterial transcription regulator TRAP as a model system to investigate the features that define the oligomeric state of a circular protein and to question how the subunit number could be manipulated. METHODOLOGY/PRINCIPAL FINDINGS: We find that while Bacillus subtilis and Bacillus stearothermophilus TRAP form 11-subunit oligomers, the Bacillus halodurans TRAP exclusively forms 12-subunit assemblies. Significantly, the two states of TRAP are related by a simple rigid body rotation of individual subunits around inter-subunit axes. We tested if such a rotation could be induced by insertion or deletion mutations at the subunit interface. Using wild type 11-subunit TRAP, we demonstrate that removal of five C-terminal residues at the outer side of the inter-subunit axis or extension of an amino acid side chain at the opposite, inner side, increased the subunit number from 11 to 12. Our findings are supported by crystal structures of TRAP oligomers and by native mass spectrometry data. CONCLUSIONS/SIGNIFICANCE: The subunit number of the TRAP oligomer can be manipulated by introducing deletion or addition mutations at the subunit interface. An analysis of available and emerging structural data on alternative oligomeric states indicates that the same principles may also apply to the subunit number of other circular assemblies suggesting that the deletion/addition approach could be used generally to engineer transitions between different oligomeric states.

Structure and activity of a novel archaeal ß-CASP protein with N-terminal KH domains.

MTH1203, a ß-CASP metallo-ß-lactamase family nuclease from the archaeon Methanothermobacter thermautotrophicus, was identified as a putative nuclease that might contribute to RNA processing. The crystal structure of MTH1203 reveals that, in addition to the metallo-ß-lactamase nuclease and the ß-CASP domains, it contains two contiguous KH domains that are unique to MTH1203 and its orthologs. RNA-binding experiments indicate that MTH1203 preferentially binds U-rich sequences with a dissociation constant in the micromolar range. In vitro nuclease activity assays demonstrated that MTH1203 is a zinc-dependent nuclease. MTH1203 is also shown to be a dimer and, significantly, this dimerization enhances the nuclease activity. Transcription termination in archaea produces mRNA transcripts with U-rich 3' ends that could be degraded by MTH1203 considering its RNA-binding specificity. We hypothesize that this nuclease degrades mRNAs of proteins targeted for degradation and so regulates archaeal RNA turnover, possibly in concert with the exosome.

Asymmetric recruitment of cIAPs by TRAF2.

Cellular inhibitor of apoptosis protein (cIAP) 1 and cIAP2 set the balance between transcription factor and apoptosis signaling downstream of tumor necrosis factor (TNF) receptor superfamily members by acting as ubiquitin E3 ligases for substrates that are part of the TNF receptor complex. To fulfill this role, cIAPs must be recruited to the receptor complex by TNF-receptor-associated factor (TRAF) 2. In this study, we reconstituted the complex between baculoviral IAP repeat (BIR) 1 of cIAP1 and the coiled-coil region of TRAF2, solved the structure of BIR1 from cIAP1, and mapped key binding residues on each molecule using mutagenesis. Biophysical analysis indicates that a single BIR1 domain binds the trimeric TRAF2 coiled-coil domain. This suggests that only one IAP molecule binds to each TRAF trimer and makes it likely that the dimeric cIAPs crosslink two TRAF trimers.

Structure of the BH3 domains from the p53-inducible BH3-only proteins Noxa and Puma in complex with Mcl-1.

Pro-survival proteins in the B-cell lymphoma-2 (Bcl-2) family have a defined specificity profile for their cell death-inducing BH3-only antagonists. Solution structures of myeloid cell leukaemia-1 (Mcl-1) in complex with the BH3 domains from Noxa and Puma, two proteins regulated by the tumour suppressor p53, show that they bind as amphipathic alpha-helices in the same hydrophobic groove of Mcl-1, using conserved residues for binding. Thermodynamic parameters for the interaction of Noxa, Puma and the related BH3 domains of Bmf, Bim, Bid and Bak with Mcl-1 were determined by calorimetry. These unstructured BH3 domains bind Mcl-1 with affinities that span 3 orders of magnitude, and binding is an enthalpically driven and entropy-enthalpy-compensated process. Alanine scanning analysis of Noxa demonstrated that only a subset of residues is required for interaction with Mcl-1, and these residues are localised to a short highly conserved sequence motif that defines the BH3 domain. Chemical shift mapping of Mcl-1:BH3 complexes showed that Mcl-1 engages all BH3 ligands in a similar way and that, in addition to changes in the immediate vicinity of the binding site, small molecule-wide structural adjustments accommodate ligand binding. Our studies show that unstructured peptides, such as the BH3 domains, behave like their structured counterparts and can bind tightly and selectively in an enthalpically driven process.