Implementation of a patient safety training program in radiation oncology residency: A pilot study.

PURPOSE: An educational program using Radiation Oncology-Incident Learning System (RO-ILS) was developed to improve safety culture and training for radiation oncology (RO) residents. METHODS: The program included a pre-training assessment, interactive training, integration of residents into quality assurance meetings, and a post-training assessment over a 3 month rotation. RESULTS: Twelve residents completed the safety training program. Pre-training assessment mean scores (five-point scale) of experience with Incident Learning Systems (ILS), root-cause analysis (RCA), failure-mode and effect analysis (FMEA), safety training, and culture were 2.3, 2.8, 2.0, 4.0, and 4.4, respectively. Post-training assessment showed a significant increase in ILS 4.0 (p < 0.001), RCA 3.8 (p = 0.008), and FMEA 3.3 (p = 0.006) and safety culture (4.8, p = 0.043). Additionally, residents were anonymously surveyed ≥ 10 months after graduation to determine the long-term value of the program. The overall assessment from the graduated residents indicates that this education is valued by RO in many institutions. The majority of the residents are either currently utilizing or plan to utilize the information gained in this program in their new institutions. CONCLUSIONS: We report a successful implementation of a safety training program in a RO residency with significant improvements in self-reported confidence with the concepts of ILS, RCA, and FMEA and an improved perception of safety culture. This program can be implemented across all residency programs.

MPLA case: How do you lead as a lead physicist?

This work of fiction is part of a case study series developed by the Medical Physics Leadership Academy (MPLA). It is intended to facilitate the discussion of the managerial and leadership challenges faced by a clinical medical physicist. In this case, a physicist David used to work in a clinic where he thrived and felt like a leader, despite not having the title. After a job change, he is now officially the "Lead Physicist" at a hospital newly affiliated with a large academic healthcare system. He believes he will be equally successful. Yet he struggles to bring about changes and get buy-in from coworkers. In the end, he feels like giving up and considers changing his job. This case is in the scenario of Problem Diagnosis.i The intended use of this case, through group discussion or self-study, is to encourage readers to perform a comprehensive analysis that identifies the root cause of the problem. This case study falls under the scope of and is supported by the MPLA, a committee in the American Association of Physicists in Medicine (AAPM).

MPLA Case 2: A junior physicist attempts to improve radiotherapy workflow.

This fictional case describes the challenging situation for a junior physicist, who joined her hometown's cancer center as a solo physicist after graduating from residency. She is concerned about providing optimal patient care as well as improving her work/life balance. She wonders how to move forward. The intended use of the case study, in either a facilitated learning session or self-study, is to inspire the readers to discuss the situation, analyze the institutional and personal factors, apply relevant leadership skills, and propose action plans. This case study falls under the scope of, and is supported by, the Medical Physics Leadership Academy (MPLA). A sample facilitator's guide or self-study guide is available upon request to the MPLA Cases Subcommittee.

MPLA Case 3: Don't criticize me in public!

This work of fiction re-enacts a scenario in which a medical physics resident was not able to address a physics call during patient simulation and was criticized by the supervising faculty physicist in front of the team and the patient. The resident and the faculty agreed to meet afterwards to debrief the situation, in the hope of establishing a better working relationship. The intended use of this case, through group discussion, self-study, or role-play, is to encourage readers to discuss the situation at hand, inspire professionalism and leadership thinking, and allow the practice of conflict management. Facilitator's notes are available upon request to the MPLA Cases Subcommittee. This case study falls under the scope of and is supported by the Medical Physics Leadership Academy (MPLA), a committee in the American Association of Physicists in Medicine (AAPM).

MPLA Case 1: Implementing Cone-Beam CT in a Community Hospital.

This fictional case describes a managerial situation of implementing cone-beam computed tomography faced by a solo medical physicist in a rural community hospital. The intended use of the case study, in either a facilitated learning session or self-study, is to inspire the readers to discuss the situation, analyze the institutional and personal factors, apply relevant leadership skills, and propose action plans. This case study falls under the scope of, and is supported by, the Medical Physics Leadership Academy (MPLA). A sample facilitator's guide or self-study guide is included in the manuscript for reference by users of this case study.

Improvements in treatment planning calculations motivated by tightening IMRT QA tolerances.

Implementing tighter intensity modulated radiation therapy (IMRT) quality assurance (QA) tolerances initially resulted in high numbers of marginal or failing QA results and motivated a number of improvements to our calculational processes. This work details those improvements and their effect on results. One hundred eighty IMRT plans analyzed previously were collected and new gamma criteria were applied and compared to the original results. The results were used to obtain an estimate for the number of plans that would require additional dose volume histogram (DVH)-based analysis and therefore predicted workload increase. For 2 months and 133 plans, the established criteria were continued while the new criteria were applied and tracked in parallel. Because the number of marginal or failing plans far exceeded the predicted levels, a number of calculational elements were investigated: IMRT modeling parameters, calculation grid size, and couch top modeling. After improvements to these elements, the new criteria were clinically implemented and the frequency of passing, questionable, and failing plans measured for the subsequent 15 months and 674 plans. The retrospective analysis of selected IMRT QA results demonstrated that 75% of plans should pass, while 19% of IMRT QA plans would need DVH-based analysis and an additional 6% would fail. However, after applying the tighter criteria for 2 months, the distribution of plans was significantly different from prediction with questionable or failing plans reaching 47%. After investigating and improving several elements of the IMRT calculation processes, the frequency of questionable plans was reduced to 11% and that of failing plans to less than 1%. Tighter IMRT QA tolerances revealed the need to improve several elements of our plan calculations. As a consequence, the accuracy of our plans have improved, and the frequency of finding marginal or failing IMRT QA results, remains within our practical ability to respond.

Measurement-guided volumetric dose reconstruction for helical tomotherapy.

It was previously demonstrated that dose delivered by a conventional linear accelerator using IMRT or VMAT can be reconstructed - on patient or phantom datasets - using helical diode array measurements and a technique called planned dose perturbation (PDP). This allows meaningful and intuitive analysis of the agreement between the planned and delivered dose, including direct comparison of the dose-volume histograms. While conceptually similar to modulated arc techniques, helical tomotherapy introduces significant challenges to the PDP formalism, arising primarily from TomoTherapy delivery dynamics. The temporal characteristics of the delivery are of the same order or shorter than the dosimeter's update interval (50 ms). Additionally, the prevalence of often small and complex segments, particularly with the 1 cm Y jaw setting, lead to challenges related to detector spacing. Here, we present and test a novel method of tomotherapy-PDP (TPDP) designed to meet these challenges. One of the novel techniques introduced for TPDP is organization of the subbeams into larger subunits called sectors, which assures more robust synchronization of the measurement and delivery dynamics. Another important change is the optional application of a correction based on ion chamber (IC) measurements in the phantom. The TPDP method was validated by direct comparisons to the IC and an independent, biplanar diode array dosimeter previously evaluated for tomotherapy delivery quality assurance. Nineteen plans with varying complexity were analyzed for the 2.5 cm tomotherapy jaw setting and 18 for the 1 cm opening. The dose differences between the TPDP and IC were 1.0% ± 1.1% and 1.1% ± 1.1%, for 2.5 and 1.0 cm jaw plans, respectively. Gamma analysis agreement rates between TPDP and the independent array were: 99.1%± 1.8% (using 3% global normalization/3 mm criteria) and 93.4% ± 7.1% (using 2% global/2 mm) for the 2.5 cm jaw plans; for 1 cm plans, they were 95.2% ± 6.7% (3% G/3) and 83.8% ± 12% (2% G/2). We conclude that TPDP is capable of volumetric dose reconstruction with acceptable accuracy. However, the challenges of fast tomotherapy delivery dynamics make TPDP less precise than the IMRT/VMAT PDP version, particularly for the 1 cm jaw setting.

Evaluation of semiempirical VMAT dose reconstruction on a patient dataset based on biplanar diode array measurements.

We report the results of a preclinical evaluation of recently introduced commercial tools for 3D patient IMRT/VMAT dose reconstruction, the Delta4 Anatomy calculation algorithm. Based on the same initial measurement, volumetric dose can be reconstructed in two ways. Three-dimensional dose on the Delta4 phantom can be obtained by renormalizing the planned dose distribution by the measurement values (D4 Interpolation). Alternatively, incident fluence can be approximated from the phantom measurement and used for volumetric dose calculation on an arbitrary (patient) dataset with a pencil beam algorithm (Delta4 PB). The primary basis for comparison was 3D dose obtained by previously validated measurement-guided planned dose perturbation method (ACPDP), based on the ArcCHECK dosimeter with 3DVH software. For five clinical VMAT plans, D4 Interpolation agreed well with ACPDP on a homogeneous cylindrical phantom according to gamma analysis with local dose-error normalization. The average agreement rates were 98.2% ± 1.3% (1 SD), (range 97.0%-100%) and 92.8% ± 3.9% (89.5%-99.2%), for the 3%/3 mm and 2%/2 mm criteria, respectively. On a similar geometric phantom, D4 PB demonstrated substantially lower agreement rates with ACPDP: 88.6% ± 6.8% (81.2%-96.1%) and 72.4% ± 8.4% (62.1%-81.1%), for 3%/3 mm and 2%/2 mm, respectively. The average agreement rates on the heterogeneous patients' CT datasets are lower yet: 81.2% ± 8.6% (70.4%-90.4%) and 64.6% ± 8.4% (56.5%-74.7%), respectively, for the same two criteria sets. For both threshold combinations, matched analysis of variance (ANOVA) multiple comparisons showed statistically significant differences in mean agreement rates (p < 0.05) for D4 Interpolation versus ACPDP on one hand, and D4 PB versus ACPDP on either cylindrical or patient dataset on the other hand. Based on the favorable D4 Interpolation results for VMAT plans, the resolution of the reconstruction method rather than hardware design is likely to be responsible for D4 PB limitations.

Daily Quality Assurance Efficiency Evaluation Using SunCHECK Machine and Machine Performance Check.

Purpose To investigate time efficiency, applicability, and accuracy of using a web-based, independent quality assurance (QA) platform and vendor-dependent based system check for daily linear accelerator (LINAC) QA. Methods  Time needed to perform daily QA on a single (n=1) LINAC was collected for three months. Task Group report 142 (TG-142) compliant daily QA included dosimetry checks (four photon, four electron beams); imaging checks (planar kilovolt (kV) & megavolt (MV), kV cone-beam computed tomography (CBCT)); and mechanical and safety checks using SunCHECK Machine (SCM) (Sun Nuclear Inc., Melbourne, FL, USA). Additionally, Machine Performance Check (MPC) (Varian Medical Systems, Inc., Palo Alto, CA, USA) was performed for all energies. Four trained radiation therapists performed daily QA on both platforms. Data were collected to identify the time required to complete both SCM and MPC. Additionally, the two platforms were evaluated on usability and features. Output results were compared to our monthly standard to assess accuracy. Results On average, SCM took 22 minutes with a standard deviation of six minutes and MPC took 15 minutes with a standard deviation of three minutes. MPC output results were impacted due to the beam output being coupled to the beam profile changes. As a result, the two systems on average disagreed by -1.41% after three months despite being baselined at the same time point and output agreeing well initially (average difference of -0.1% across all energies). While there was overlap in the tests performed, SCM tests were more relevant to TG-142 while MPC tests were beneficial to machine service and, with a clear understanding of the limitations of the system, found suitable as a secondary backup to SCM for daily output verification. Conclusions  This work demonstrates that a comprehensive TG-142 daily QA can be designed using SCM and MPC can be added as a beneficial tool and backup for output verification while still maintaining an efficient daily QA process.

Survival and Radiation Dose Differences Between Single Versus Multi-Session Gamma Knife Stereotactic Radiosurgery in Patients Treated for Multiple (≥10) Brain Metastases.

OBJECTIVE:  To explore whether treatment with multiple Gamma Knife sessions (mGK) resulted in different survival outcomes or cumulative radiation doses compared to single session Gamma Knife (sGK) in patients who have been treated for ≥10 brain metastases (BMs). METHODS:  Thirty-five patients with ≥10 BMs treated with Gamma Knife stereotactic radiosurgery (GK SRS) were identified and separated into sGK vs. mGK cohorts. Survival outcomes and dosimetry data were compared between the two groups. Recursive partitioning analysis (RPA) classes were used to further stratify patients. RESULTS:  mGK patients survived longer from the first GK treatment (p<0.009). By RPA class, patients with class 1 had a prolonged survival from BM diagnosis than those in classes 2 and 3 (p=0.004). However, survival was not significantly different between the classes from the first GK treatment (p=0.089). Stratified by mGK vs. sGK and RPA classes, sGK patients in RPA class 1 had the longest survival from BM diagnosis but the worst survival from GK treatment. mGK patients in any RPA class had the best survival from the first GK treatment. For patients with RPA class 2+3, mGK was associated with longer survival from both BM diagnosis and first treatment. Statistical but not clinical differences between the mGK vs. sGK groups were observed in the max dose to the targets and cochlea, and the V40Gy whole brain dose. CONCLUSIONS:  mGK may be beneficial if GK is initiated early at first BM diagnosis vs. sGK initiated late. Future research is required to confirm these findings and explore additional areas of interest, such as quality-of-life and economic considerations.

Disparities in Radiation Therapy: Practice Patterns Analysis of Deep Inspiratory Breath Hold Use in Non-English Speakers.

PURPOSE: Our purpose was to examine current practice patterns in non-English-speaking patients with breast cancer undergoing deep inspiratory breath hold (DIBH). METHODS AND MATERIALS: An anonymous, voluntary REDCap survey was distributed to 60 residency program coordinators of US radiation oncology departments to survey their faculty and recent graduates. Eligibility was limited to board-certified radiation oncologists who had treated breast cancer within the prior 6 months. RESULTS: There were 69 respondents, 53 of whom were eligible. Forty-two percent (n = 22) of eligible respondents were from the main site at an academic center, with 28% (n = 15) representing a satellite site and 30% (n = 16) from private practice. Fifty-three percent reported at least 10% of their patients were non-English speaking. Ninety percent offered DIBH at their institution; of those, 74% used DIBH for at least one-fourth of their patients with breast cancer. Ninety-eight percent of those who use DIBH performed coaching at simulation, with 32% answering they would be "less likely" to use DIBH for non-English speakers. When used, 94% take into consideration potential language barriers for proper execution of DIBH. However, 51% had an interpreter present 76% to 100% of the time at computed tomography simulation, which decreased to 31% at first fraction and 11% at subsequent treatments. For non-English-speaking patients undergoing DIBH coaching without a certified interpreter, 55% of respondents indicated that they provided verbal coaching in English, 32% indicated "not applicable" because they always use a certified interpreter, 11% used visual aids, and 32% indicated "other." Of those who answered "other," the most commonly cited response was using therapists or staff who spoke the patient's native language. CONCLUSIONS: Disparities in the application of DIBH exist despite its established utility in reducing cardiac dose. This study provides evidence that language barriers may affect physician treatment practices from initial consideration of DIBH to subsequent delivery. These data suggest that breast cancer treatment considerations and subsequent execution are negatively affected in non-English-speaking patients.

Hippocampal Dosimetry and the Necessity of Hippocampal-Sparing in Gamma Knife Stereotactic Radiosurgery for Extensive Brain Metastases.

PURPOSE: To characterize hippocampal dosimetry in Gamma Knife stereotactic radiosurgery (GK-SRS) for extensive brain metastases and evaluate the need for hippocampal-sparing in GK-SRS treatment planning. METHODS AND MATERIALS: We reviewed 75 GK-SRS plans for the treatment of 4 to 30 brain metastases generated without consideration of the hippocampi. The mean dose, maximum dose to 100% of the volume (D100), maximum dose to 40% of the volume (D40), and maximum point dose (Dmax, 0.03 cm3) were obtained for the unilateral and bilateral hippocampi and compared between plans with 4 to 9 and ≥10 lesions. The rate at which plans met hippocampal dose constraints (D100 ≤ 4.21 Gy, D40 ≤ 4.50 Gy, and Dmax ≤ 6.65 Gy) was compared between groups, and each was examined for risk factors associated with excessive hippocampal dosing. For plans that exceeded constraints, we attempted replanning to spare the hippocampi. RESULTS: Compared with those for the treatment of 4 to 9 brain metastases, GK-SRS plans with ≥10 lesions were associated with significantly greater median bilateral mean dose (1.0 vs 2.0, P = .001), D100 (0.4 vs 0.8, P = .003), D40 (0.9 vs 1.9, P = .001), and Dmax (2.0 vs 4.9, P = .0005). These plans also less frequently met hippocampal constraints, with this difference trending toward significance (80% vs 93%; P = .1382; odds ratio 0.29; 95% CI, 0.06-1.4). Risk factors for exceeding constraints included greater total disease volume and closer approach of the nearest metastasis to the hippocampi, both of which depended upon the number of metastases present. Seven plans failed to meet constraints and were successfully replanned to spare the hippocampi with minimal increases in treatment time and without compromise to target coverage or conformity. CONCLUSIONS: Patients with extensive brain metastases treated with GK-SRS are at increased risk for excessive hippocampal dosing when ≥10 lesions are present or when lesions are in close proximity to the hippocampi and may benefit from hippocampal-avoidant treatment planning.

A clinically relevant IMRT QA workflow: Design and validation.

PURPOSE: The purpose of this study was to determine clinically relevant pass/question/fail criteria for gamma analysis of intensity-modulated radiation therapy quality assurance (IMRT QA) plans, identify which plans should be further analyzed with dose-volume histogram (DVH) metrics, and create a workflow for performing that DVH-based analysis. METHODS: A total of 11 plans, 5 prostate and 6 head/neck, were selected to represent known good plans based on their high-passing rate using conventional IMRT QA criteria. These were modified by moving the programmed MLC positions to underdose the target or overdose important structures by varying amounts. Commercially available hardware/software was used to measure and analyze all plans (76 total) using 4%/3 mm, 3%/3 mm, 3%/2 mm, and 2%/2 mm gamma criteria. Two receiver operator characteristic (ROC) curves per criterion were created to assess effective passing rates. One ROC curve was to find a higher threshold that determined a clear pass and the second to find a lower threshold to determine a clear failure. Plans between these two thresholds need DVH-based analysis to assess the clinical consequence of the dose difference. The modified plans were analyzed in the planning system and reconstructed in commercially available DVH-based analysis software to access the accuracy and usefulness of the software. RESULTS: Analysis of the ROC curves showed optimal pass and fail thresholds for plan error detection per criterion to achieve clinically relevant sensitivity and specificity. Based on measurement uncertainty and pass/fail ranges, 3%/2 mm gamma criteria with a pass threshold of 95% and a fail threshold of 90% were most optimal. DVH analysis showed good agreement with all reconstructed plans except where the changes to the MLC patterns caused the periphery of the target to be underdosed. For questionable plans, comparing the organ-specific DVHs to the physician-provided planning constraints proved to be an efficient and effective workflow since plans for which the target dose was slightly high or where organs at risk were underdosed could be released for the treatment without consulting the physician for a clinical decision. CONCLUSION: This work indicates the potential for appreciable improvement in error detection for IMRT QA. Using effective pass/fail thresholds to determine plans that need DVH-based analysis minimizes the need for excessive, time-consuming, analysis, and making use of the dosimetric constraints of the plan minimizes the burden on physicians. Overall, DVH-based analysis is a powerful tool that can provide substantial insight over the traditional approach that does not provide structure-specific data.

Technical Note: Motion-perturbation method applied to dosimetry of dynamic MLC target tracking--A proof-of-concept.

PURPOSE: Previous studies show that dose to a moving target can be estimated using 4D measurement-guided dose reconstruction based on a process called virtual motion simulation, or VMS. A potential extension of VMS is to estimate dose during dynamic multileaf collimator (MLC)-tracking treatments. The authors introduce a modified VMS method and quantify its performance as proof-of-concept for tracking applications. METHODS: Direct measurements with a moving biplanar diode array were used to verify accuracy of the VMS dose estimates. A tracking environment for variably sized circular MLC apertures was simulated by sending preprogrammed control points to the MLC while simultaneously moving the accelerator treatment table. Sensitivity of the method to simulated tracking latency (0-700 ms) was also studied. Potential applicability of VMS to fast changing beam apertures was evaluated by modeling, based on the demonstrated dependence of the cumulative dose on the temporal dose gradient. RESULTS: When physical and virtual latencies were matched, the agreement rates (2% global/2 mm gamma) between the VMS and the biplanar dosimeter were above 96%. When compared to their own reference dose (0 induced latency), the agreement rates for VMS and biplanar array track closely up to 200 ms of induced latency with 10% low-dose cutoff threshold and 300 ms with 50% cutoff. Time-resolved measurements suggest that even in the modulated beams, the error in the cumulative dose introduced by the 200 ms VMS time resolution is not likely to exceed 0.5%. CONCLUSIONS: Based on current results and prior benchmarks of VMS accuracy, the authors postulate that this approach should be applicable to any MLC-tracking treatments where leaf speeds do not exceed those of the current Varian accelerators.

Methods, software and datasets to verify DVH calculations against analytical values: Twenty years late(r).

PURPOSE: The authors designed data, methods, and metrics that can serve as a standard, independent of any software package, to evaluate dose-volume histogram (DVH) calculation accuracy and detect limitations. The authors use simple geometrical objects at different orientations combined with dose grids of varying spatial resolution with linear 1D dose gradients; when combined, ground truth DVH curves can be calculated analytically in closed form to serve as the absolute standards. METHODS: dicom RT structure sets containing a small sphere, cylinder, and cone were created programmatically with axial plane spacing varying from 0.2 to 3 mm. Cylinders and cones were modeled in two different orientations with respect to the IEC 1217 Y axis. The contours were designed to stringently but methodically test voxelation methods required for DVH. Synthetic RT dose files were generated with 1D linear dose gradient and with grid resolution varying from 0.4 to 3 mm. Two commercial DVH algorithms-pinnacle (Philips Radiation Oncology Systems) and PlanIQ (Sun Nuclear Corp.)-were tested against analytical values using custom, noncommercial analysis software. In Test 1, axial contour spacing was constant at 0.2 mm while dose grid resolution varied. In Tests 2 and 3, the dose grid resolution was matched to varying subsampled axial contours with spacing of 1, 2, and 3 mm, and difference analysis and metrics were employed: (1) histograms of the accuracy of various DVH parameters (total volume, Dmax, Dmin, and doses to % volume: D99, D95, D5, D1, D0.03 cm(3)) and (2) volume errors extracted along the DVH curves were generated and summarized in tabular and graphical forms. RESULTS: In Test 1, pinnacle produced 52 deviations (15%) while PlanIQ produced 5 (1.5%). In Test 2, pinnacle and PlanIQ differed from analytical by >3% in 93 (36%) and 18 (7%) times, respectively. Excluding Dmin and Dmax as least clinically relevant would result in 32 (15%) vs 5 (2%) scored deviations for pinnacle vs PlanIQ in Test 1, while Test 2 would yield 53 (25%) vs 17 (8%). In Test 3, statistical analyses of volume errors extracted continuously along the curves show pinnacle to have more errors and higher variability (relative to PlanIQ), primarily due to pinnacle's lack of sufficient 3D grid supersampling. Another major driver for pinnacle errors is an inconsistency in implementation of the "end-capping"; the additional volume resulting from expanding superior and inferior contours halfway to the next slice is included in the total volume calculation, but dose voxels in this expanded volume are excluded from the DVH. PlanIQ had fewer deviations, and most were associated with a rotated cylinder modeled by rectangular axial contours; for coarser axial spacing, the limited number of cross-sectional rectangles hinders the ability to render the true structure volume. CONCLUSIONS: The method is applicable to any DVH-calculating software capable of importing dicom RT structure set and dose objects (the authors' examples are available for download). It includes a collection of tests that probe the design of the DVH algorithm, measure its accuracy, and identify failure modes. Merits and applicability of each test are discussed.

Cross-validation of two commercial methods for volumetric high-resolution dose reconstruction on a phantom for non-coplanar VMAT beams.

BACKGROUND AND PURPOSE: Delta(4) (ScandiDos AB, Uppsala, Sweden) and ArcCHECK with 3DVH software (Sun Nuclear Corp., Melbourne, FL, USA) are commercial quasi-three-dimensional diode dosimetry arrays capable of volumetric measurement-guided dose reconstruction. A method to reconstruct dose for non-coplanar VMAT beams with 3DVH is described. The Delta(4) 3D dose reconstruction on its own phantom for VMAT delivery has not been thoroughly evaluated previously, and we do so by comparison with 3DVH. MATERIALS AND METHODS: Reconstructed volumetric doses for VMAT plans delivered with different table angles were compared between the Delta(4) and 3DVH using gamma analysis. RESULTS: The average γ (2% local dose-error normalization/2mm) passing rate comparing the directly measured Delta(4) diode dose with 3DVH was 98.2 ± 1.6% (1SD). The average passing rate for the full volumetric comparison of the reconstructed doses on a homogeneous cylindrical phantom was 95.6 ± 1.5%. No dependence on the table angle was observed. CONCLUSIONS: Modified 3DVH algorithm is capable of 3D VMAT dose reconstruction on an arbitrary volume for the full range of table angles. Our comparison results between different dosimeters make a compelling case for the use of electronic arrays with high-resolution 3D dose reconstruction as primary means of evaluating spatial dose distributions during IMRT/VMAT verification.

Experimentally studied dynamic dose interplay does not meaningfully affect target dose in VMAT SBRT lung treatments.

PURPOSE: The effects of respiratory motion on the tumor dose can be divided into the gradient and interplay effects. While the interplay effect is likely to average out over a large number of fractions, it may play a role in hypofractionated [stereotactic body radiation therapy (SBRT)] treatments. This subject has been extensively studied for intensity modulated radiation therapy but less so for volumetric modulated arc therapy (VMAT), particularly in application to hypofractionated regimens. Also, no experimental study has provided full four-dimensional (4D) dose reconstruction in this scenario. The authors demonstrate how a recently described motion perturbation method, with full 4D dose reconstruction, is applied to describe the gradient and interplay effects during VMAT lung SBRT treatments. METHODS: VMAT dose delivered to a moving target in a patient can be reconstructed by applying perturbations to the treatment planning system-calculated static 3D dose. Ten SBRT patients treated with 6 MV VMAT beams in five fractions were selected. The target motion (motion kernel) was approximated by 3D rigid body translation, with the tumor centroids defined on the ten phases of the 4DCT. The motion was assumed to be periodic, with the period T being an average from the empirical 4DCT respiratory trace. The real observed tumor motion (total displacement ≤ 8 mm) was evaluated first. Then, the motion range was artificially increased to 2 or 3 cm. Finally, T was increased to 60 s. While not realistic, making T comparable to the delivery time elucidates if the interplay effect can be observed. For a single fraction, the authors quantified the interplay effect as the maximum difference in the target dosimetric indices, most importantly the near-minimum dose (D99%), between all possible starting phases. For the three- and five-fractions, statistical simulations were performed when substantial interplay was found. RESULTS: For the motion amplitudes and periods obtained from the 4DCT, the interplay effect is negligible (<0.2%). It is also small (0.9% average, 2.2% maximum) when the target excursion increased to 2-3 cm. Only with large motion and increased period (60 s) was a significant interplay effect observed, with D99% ranging from 16% low to 17% high. The interplay effect was statistically significantly lower for the three- and five-fraction statistical simulations. Overall, the gradient effect dominates the clinical situation. CONCLUSIONS: A novel method was used to reconstruct the volumetric dose to a moving tumor during lung SBRT VMAT deliveries. With the studied planning and treatment technique for realistic motion periods, regardless of the amplitude, the interplay has nearly no impact on the near-minimum dose. The interplay effect was observed, for study purposes only, with the period comparable to the VMAT delivery time.

Motion as a perturbation: measurement-guided dose estimates to moving patient voxels during modulated arc deliveries.

PURPOSE: To present a framework for measurement-guided VMAT dose reconstruction to moving patient voxels from a known motion kernel and the static phantom data, and to validate this perturbation-based approach with the proof-of-principle experiments. METHODS: As described previously, the VMAT 3D dose to a static patient can be estimated by applying a phantom measurement-guided perturbation to the treatment planning system (TPS)-calculated dose grid. The fraction dose to any voxel in the presence of motion, assuming the motion kernel is known, can be derived in a similar fashion by applying a measurement-guided motion perturbation. The dose to the diodes in a helical phantom is recorded at 50 ms intervals and is transformed into a series of time-resolved high-density volumetric dose grids. A moving voxel is propagated through this 4D dose space and the fraction dose to that voxel in the phantom is accumulated. The ratio of this motion-perturbed, reconstructed dose to the TPS dose in the phantom serves as a perturbation factor, applied to the TPS fraction dose to the similarly situated voxel in the patient. This approach was validated by the ion chamber and film measurements on four phantoms of different shape and structure: homogeneous and inhomogeneous cylinders, a homogeneous cube, and an anthropomorphic thoracic phantom. A 2D motion stage was used to simulate the motion. The stage position was synchronized with the beam start time with the respiratory gating simulator. The motion patterns were designed such that the motion speed was in the upper range of the expected tumor motion (1-1.4 cm∕s) and the range exceeded the normally observed limits (up to 5.7 cm). The conformal arc plans for X or Y motion (in the IEC 61217 coordinate system) consisted of manually created narrow (3 cm) rectangular strips moving in-phase (tracking) or phase-shifted by 90° (crossing) with respect to the phantom motion. The XY motion was tested with the computer-derived VMAT MLC sequences. For all phantoms and plans, time-resolved (10 Hz) ion chamber dose was collected. In addition, coronal (XY) films were exposed in the cube phantom to a VMAT beam with two different starting phases, and compared to the reconstructed motion-perturbed dose planes. RESULTS: For the X or Y motions with the moving strip and geometrical phantoms, the maximum difference between perturbation-reconstructed and ion chamber doses did not exceed 1.9%, and the average for any motion pattern∕starting phase did not exceed 1.3%. For the VMAT plans on the cubic and thoracic phantoms, one point exhibited a 3.5% error, while the remaining five were all within 1.1%. Across all the measurements (N = 22), the average disagreement was 0.5 ± 1.3% (1 SD). The films exhibited γ(3%∕3 mm) passing rates ≥90%. CONCLUSIONS: The dose to an arbitrary moving voxel in a patient can be estimated with acceptable accuracy for a VMAT delivery, by performing a single QA measurement with a cylindrical phantom and applying two consecutive perturbations to the TPS-calculated patient dose. The first one accounts for the differences between the planned and delivered static doses, while the second one corrects for the motion.