Conformational Control of Fast Asparagine Deamidation in a Norovirus Capsid Protein.

Accelerated spontaneous deamidation of asparagine 373 and subsequent conversion into an isoaspartate has been shown to attenuate the binding of histo blood group antigens (HBGAs) to the protruding domain (P-domain) of the capsid protein of a prevalent norovirus strain (GII.4). Here, we link an unusual backbone conformation of asparagine 373 to its fast site-specific deamidation. NMR spectroscopy and ion exchange chromatography have been used to monitor the deamidation reaction of P-domains of two closely related GII.4 norovirus strains, specific point mutants, and control peptides. MD simulations over several microseconds have been instrumental to rationalize the experimental findings. While conventional descriptors such as available surface area, root-mean-square fluctuations, or nucleophilic attack distance fail as explanations, the population of a rare syn-backbone conformation distinguishes asparagine 373 from all other asparagine residues. We suggest that stabilization of this unusual conformation enhances the nucleophilicity of the backbone nitrogen of aspartate 374, in turn accelerating the deamidation of asparagine 373. This finding should be relevant to the development of reliable prediction algorithms for sites of rapid asparagine deamidation in proteins.

The Fully Oxidized State of the Glutamate Coordinated O2-Tolerant [NiFe]-Hydrogenase Shows a Ni(III)/Fe(III) Open-Shell Singlet Ground State.

The oxygen tolerance of the [NiFe]-hydrogenase from H. thermoluteolus was recently assigned to originate from an unusual coordination sphere of the active site nickel atom (Shomura et al. Science 2017, 357, 928-932, 10.1126/science.aan4497). In the oxidized state, a terminal cysteine residue is displaced by a bidentate coordinating nearby Glu32 and thus moves to occupy a third µ-cysteine bridging position. Spectral features of the oxidized state were assigned to originate from a closed-shell Ni(IV)/Fe(II) state (Kulka-Peschke et al. J. Am. Chem. Soc. 2022, 144, 17022-17032, 10.1021/jacs.2c06400). Such a high-valent nickel oxidation state is unprecedented in biological systems. The spectral properties and the coordination sphere of that [NiFe]-hydrogenase can, however, also be rationalized by an energetically lower broken-symmetry Ni(III)/Fe(III) state of the active site which was not considered. In this open-shell singlet, the ligand-mediated antiferromagnetic spin-coupling leads to an overall S = 0 spin state with evenly distributed spin densities over the metal atoms. Experiments are suggested that may clarify the final assignment of redox states.

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition.

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Structural Dynamics of Lys11-Selective Deubiquitinylase Cezanne-1 during the Catalytic Cycle.

Deubiquitinylating enzymes (DUBs) regulate the deubiquitinylation process of post-translationally modified proteins and thus control protein signaling in various cellular processes. The DUB Cezanne-1 catalyzes the cleavage of the iso-peptide bond of Lys11-linked polyubiquitin chains with high selectivity. Crystal structures of Cezanne-1 in different states provide important insight regarding the complex formation and global changes during the catalytic cycle but are lacking details of dynamics and control of activation. Activity-based probes are used to isolate intermediate states upon forming covalent bonds with the DUB active site. Those, however, may lead to structures that are non-native. Conformational changes of Cezanne-1, during its process of activation and proteolytic activity, are investigated using all-atom molecular dynamics (MD) simulations of the ubiquitin-free, diubiquitin-bound, and monoubiquitin-bound Cezanne-1 DUB for a total of ∼18 µs. Our results show that ubiquitin-free Cezanne-1 dynamically shuttles between catalytically competent and incompetent states which suggests that its activation is independent of substrate binding. The catalytically competent substrate-free Cezanne-1 promotes distal ubiquitin substrate access to the catalytic center. The subsequent binding of the proximal ubiquitin shifts the equilibrium toward the catalytically competent state of the dyad, thereby promoting proteolysis of the iso-peptide bond. After cleavage of the scissile bond, sequential dissociation of first the proximal ubiquitin induces the inactivation of Cezanne-1. The subsequent release of the distal ubiquitin fully reconstitutes the inactive substrate-free state of Cezanne-1. The process of activation and catalytic turnover of DUB Cezanne-1 is a multistage cycle with several critical dynamic transitions that cannot be characterized based on protein structures alone. Activity-based probes of cysteine proteases lead to non-native protein-protein contacts, which need to be resolved in order to be able to issue statements about physiological states and substrate binding.

Substrate-assisted activation and selectivity of the bacterial RavD effector deubiquitinylase.

Deubiquitinylases (DUBs) catalyze the peptide bond cleavage of specific ubiquitin linkages at distinct protein substrates. Pathogens from viruses and bacteria independently developed effector proteins with DUB activity to mimic host DUB functions and circumvent immune responses. The effector protein RavD from Legionella pneumophila cleaves linear ubiquitin chains with an exclusive methionine-1 selectivity. It thus performs as a functional analogue of the human DUB OTULIN, which achieves its selectivity only via a specialized proximal ubiquitin S1' binding site as well as a substrate-assisted activation of the catalytic triad. An analysis of the crystal structures of bacterial RavD in its free and di-ubiquitin-bound forms, in order to rationalize the structural basis for its selectivity and activation mechanism, is not fully conclusive. As these ambiguities might arise from the introduced double mutation of the di-ubiquitin substrate in the RavD-di-ubiquitin complex crystal structure, biomolecular modeling, and molecular dynamics sampling (1-2 µs for each system of RavD and OTULIN) were employed to reconstitute the physiological RavD-di-ubiquitin complex. The simulations show that the distal S1 ubiquitin binding sites of RavD and OTULIN are similar in terms of interface area, composition, and ubiquitin binding affinity. The proximal S1' site of RavD, in contrast, is significantly smaller and ubiquitin binding is weaker and more flexible than in OTULIN. Upon substrate access, the residues of the catalytic triad of RavD show a reduction of flexibility and a conformational transition toward a catalytically active state. Thus, the enzymatic activation of RavD is presumably also substrate-assisted and a clear rationale for the common M1-substrate selectivity.

Comparison of mobility shift affinity capillary electrophoresis and capillary electrophoresis frontal analysis for binding constant determination between human serum albumin and small drugs.

In this study, two capillary electrophoresis-based ligand binding assays, namely, mobility shift affinity capillary electrophoresis (ms-ACE) and capillary electrophoresis-frontal analysis (CE-FA), were applied to determine binding parameters of human serum albumin toward small drugs under similar experimental conditions. The substances S-amlodipine (S-AML), lidocaine (LDC), l-tryptophan (l-TRP), carbamazepine (CBZ), ibuprofen (IBU), and R-verapamil (R-VPM) were used as the main binding partners. The scope of this comparative study was to estimate and compare both the assays in terms of their primary measure's precision and the reproducibility of the derived binding parameters. The effective mobility could be measured with pooled CV values between 0.55% and 7.6%. The precision of the r values was found in the range between 1.5% and 10%. Both assays were not universally applicable. The CE-FA assay could successfully be applied to measure the drugs IBU, CBZ, and LDC, and the interaction toward CBZ, S-AML, l-TRP, and R-VPM could be determined using ms-ACE. The average variabilities of the estimated binding constants were 64% and 67% for CE-FA and ms-ACE, respectively.

A benchmark for non-covalent interactions in organometallic crystals.

Organometallic complexes are the basis for homogeneous catalysis, have applications in materials science and are also active pharmaceutical ingredients. The interaction between transition metal complexes in the solid state is determining their thermodynamics and bio-availability. Non-covalent interactions such as hydrogen bonding and van der Waals are stabilizing crystals of transition metal complexes. The variation of ligand field, central metal atoms and their oxidation and spin states are determinants of the magnitude of their inter-molecular interactions. A comparison of a set of 43 manually curated experimental heats of sublimation (the new XTMC43 set) and results from periodic DFT calculations shows that an agreement to within 9% can be achieved using GGA or mGGA functionals with atom-centred Gaussian-type basis functions. The need for careful assessments of consistency, calibration and reproducibility of experimental and computational data is discussed. Results regarding the new XTMC43 benchmark set are suggested to serve as a starting point for further method development, systematic screening and crystal engineering.

Activation and selectivity of OTUB-1 and OTUB-2 deubiquitinylases.

The ovarian tumor domain (OTU) deubiquitinylating cysteine proteases OTUB1 and OTUB2 (OTU ubiquitin aldehyde binding 1 and 2) are representative members of the OTU subfamily of deubiquitinylases. Deubiquitinylation critically regulates a multitude of important cellular processes, such as apoptosis, cell signaling, and growth. Moreover, elevated OTUB expression has been observed in various cancers, including glioma, endometrial cancer, ovarian cancer, and breast cancer. Here, using molecular dynamics simulation approaches, we found that both OTUB1 and OTUB2 display a catalytic triad characteristic of proteases but differ in their configuration and protonation states. The OTUB1 protein had a prearranged catalytic site, with strong electrostatic interactions between the active-site residues His265 and Asp267 In OTUB2, however, the arrangement of the catalytic triad was different. In the absence of ubiquitin, the neutral states of the catalytic-site residues in OTUB2 were more stable, resulting in larger distances between these residues. Only upon ubiquitin binding did the catalytic triad in OTUB2 rearrange and bring the active site into a catalytically feasible state. An analysis of water access channels revealed only a few diffusion trajectories for the catalytically active form of OTUB1, whereas in OTUB2 the catalytic site was solvent-accessible, and a larger number of water molecules reached and left the binding pocket. Interestingly, in OTUB2, the catalytic residues His224 and Asn226 formed a stable hydrogen bond. We propose that the observed differences in activation kinetics, protonation states, water channels, and active-site accessibility between OTUB1 and OTUB2 may be relevant for the selective design of OTU inhibitors.

Electromembrane Extraction and Mass Spectrometry for Liver Organoid Drug Metabolism Studies.

Liver organoids are emerging tools for precision drug development and toxicity screening. We demonstrate that electromembrane extraction (EME) based on electrophoresis across an oil membrane is suited for segregating selected organoid-derived drug metabolites prior to mass spectrometry (MS)-based measurements. EME allowed drugs and drug metabolites to be separated from cell medium components (albumin, etc.) that could interfere with subsequent measurements. Multiwell EME (parallel-EME) holding 100 µL solutions allowed for simple and repeatable monitoring of heroin phase I metabolism kinetics. Organoid parallel-EME extracts were compatible with ultrahigh-performance liquid chromatography (UHPLC) used to separate the analytes prior to detection. Taken together, liver organoids are well-matched with EME followed by MS-based measurements.

Incorporation of ß-Alanine in Cu(II) ATCUN Peptide Complexes Increases ROS Levels, DNA Cleavage and Antiproliferative Activity.

Redox-active Cu(II) complexes are able to form reactive oxygen species (ROS) in the presence of oxygen and reducing agents. Recently, Faller et al. reported that ROS generation by Cu(II) ATCUN complexes is not as high as assumed for decades. High complex stability results in silencing of the Cu(II)/Cu(I) redox cycle and therefore leads to low ROS generation. In this work, we demonstrate that an exchange of the α-amino acid Gly with the ß-amino acid ß-Ala at position 2 (Gly2→ß-Ala2) of the ATCUN motif reinstates ROS production (• OH and H2 O2 ). Potentiometry, cyclic voltammetry, EPR spectroscopy and DFT simulations were utilized to explain the increased ROS generation of these ß-Ala2-containing ATCUN complexes. We also observed enhanced oxidative cleavage activity towards plasmid DNA for ß-Ala2 compared to the Gly2 complexes. Modifications with positively charged Lys residues increased the DNA affinity through electrostatic interactions as determined by UV/VIS, fluorescence, and CD spectroscopy, and consequently led to a further increase in nuclease activity. A similar trend was observed regarding the cytotoxic activity of the complexes against several human cancer cell lines where ß-Ala2 peptide complexes had lower IC50 values compared to Gly2. The higher cytotoxicity could be attributed to an increased cellular uptake as determined by ICP-MS measurements.

Accurate Receptor-Ligand Binding Free Energies from Fast QM Conformational Chemical Space Sampling.

Small molecule receptor-binding is dominated by weak, non-covalent interactions such as van-der-Waals hydrogen bonding or electrostatics. Calculating these non-covalent ligand-receptor interactions is a challenge to computational means in terms of accuracy and efficacy since the ligand may bind in a number of thermally accessible conformations. The conformational rotamer ensemble sampling tool (CREST) uses an iterative scheme to efficiently sample the conformational space and calculates energies using the semi-empirical 'Geometry, Frequency, Noncovalent, eXtended Tight Binding' (GFN2-xTB) method. This combined approach is applied to blind predictions of the modes and free energies of binding for a set of 10 drug molecule ligands to the cucurbit[n]urils CB[8] receptor from the recent 'Statistical Assessment of the Modeling of Proteins and Ligands' (SAMPL) challenge including morphine, hydromorphine, cocaine, fentanyl, and ketamine. For each system, the conformational space was sufficiently sampled for the free ligand and the ligand-receptor complexes using the quantum chemical Hamiltonian. A multitude of structures makes up the final conformer-rotamer ensemble, for which then free energies of binding are calculated. For those large and complex molecules, the results are in good agreement with experimental values with a mean error of 3 kcal/mol. The GFN2-xTB energies of binding are validated by advanced density functional theory calculations and found to be in good agreement. The efficacy of the automated QM sampling workflow allows the extension towards other complex molecular interaction scenarios.

Chemical-Shift Perturbations Reflect Bile Acid Binding to Norovirus Coat Protein: Recognition Comes in Different Flavors.

Bile acids have been reported as important cofactors promoting human and murine norovirus (NoV) infections in cell culture. The underlying mechanisms are not resolved. Through the use of chemical shift perturbation (CSP) NMR experiments, we identified a low-affinity bile acid binding site of a human GII.4 NoV strain. Long-timescale MD simulations reveal the formation of a ligand-accessible binding pocket of flexible shape, allowing the formation of stable viral coat protein-bile acid complexes in agreement with experimental CSP data. CSP NMR experiments also show that this mode of bile acid binding has a minor influence on the binding of histo-blood group antigens and vice versa. STD NMR experiments probing the binding of bile acids to virus-like particles of seven different strains suggest that low-affinity bile acid binding is a common feature of human NoV and should therefore be important for understanding the role of bile acids as cofactors in NoV infection.

Conductive films prepared from inks based on copper nanoparticles synthesized by transferred arc discharge.

Copper nanoparticles (NPs) are considered as a promising alternative for silver and gold NPs in conductive inks for the application of printing electronics, since copper shows a high electrical conductivity but is significantly cheaper than silver and gold. In this study, copper NPs were synthesized in the gas phase by transferred arc discharge, which has demonstrated scale-up potential. Depending on the production parameters, copper NPs can be continuously synthesized at a production rate of 1.2-5.5 g h-1, while their Brunauer-Emmett-Teller sizes were maintained below 100 nm. To investigate the suitability in electronic printing, we use ball milling technique to produce copper conductive inks. The effect of ball milling parameters on ink stability was discussed. In addition, the electrical resistivity of copper films sintered at 300 °C in reducing atmosphere was measured to be 5.4 ± 0.6 µΩ cm which is about three times higher than that of bulk copper (1.7 µΩ cm). This indicates that conductive inks prepared from gas-phase synthesized copper NPs are competitive to the conductive inks prepared from chemically synthesized copper NPs.

Investigation of the enantioselective interaction between selected drug enantiomers and human serum albumin by mobility shift-affinity capillary electrophoresis.

Mobility shift-affinity capillary electrophoresis was employed for enantioseparation and simultaneous binding constant determination. Human serum albumin was used as a chiral selector in the background electrolyte composed of 20 mM phosphate buffer, pH 7.4. The applied setup supports a high mobility shift since albumin and the drug-albumin complex hold negative net charges, while model compounds of amlodipine and verapamil are positively charged. In order to have an accurate effective mobility determination, the Haarhoff-van der Linde function was utilized. Subsequently, the association constant was determined by nonlinear regression analysis of the dependence of effective mobilities on the total protein concentration. Differences in the apparent binding status between the enantiomers lead to mobility shifts of different extends (α). This resulted in enantioresolutions of Rs = 1.05-3.63 for both drug models. R-(+)-Verapamil (KA 1844 M-1 ) proved to bind stronger to human serum albumin compared to S-(-)-verapamil (KA 6.6 M-1 ). The association constant of S-(-)-amlodipine (KA 25 073 M-1 ) was found to be slightly higher compared to its antipode (KA 22 620 M-1 ) when applying the racemic mixture. The low measurement uncertainty of this approach was demonstrated by the close agreement of the association constant of the enantiopure S-(-)-form (KA 25 101 M-1 ).

Design of experiments as a valuable tool for biopharmaceutical analysis with (imaged) capillary isoelectric focusing.

Capillary isoelectric focusing is indispensable for characterizing charge heterogeneity and isoelectric points of biopharmaceuticals. However, there are many influencing parameters and therefore method development is challenging. This study was performed to obtain an in-depth understanding of the imaged CIEF methodology by applying a design of experiments approach. To describe the parameter's effects as objectively as possible, a polynomial regression model was derived for the most important responses. For this purpose, the reference monoclonal antibody suggested by the National Institute of Standards and Technology (NISTmAb) was used as test molecule. The total concentration and the mixing ratio of two types of carrier ampholytes and the added amounts of urea and l-arginine were selected as factors. The effects of these factors on 13 different responses such as resolution or pI values were investigated. In order to reduce the total number of experiments, a d-optimal design with 20 different parameter combinations and six replicates each was chosen. The most significant effects of the four factors were shown for the parameters related to separation efficiency and peak position. In addition, the extent of the factor's effect could be assessed. Depending on the selected factor combination, the pI value can differ up to approximately 0.15 pI units and the resolution value between main peak and adjacent basic peak can range from approximately 1.6 to 2.5, for example.

Experimental design and measurement uncertainty in ligand binding studies by affinity capillary electrophoresis.

In all life sciences ligand binding assays (LBAs) play a crucial role. Unfortunately these are very error prone. One part of this uncertainty results from the unavoidable random measurement uncertainty, another part can be attributed to the experimental design. To investigate the latter, uncertainty propagation was evaluated as a function of the given experimental design. A design space including the normalized maximum response range (nMRR), the data point position (DPP), the data point range (DPR) and the number of data points (NoDP) was defined. Based on ten measured ms ACE source data sets 20 specific parameter sets were selected by Design of Experiments. Monte Carlo simulations using 100 000 repeats for every parameter set were employed. The resulting measurement uncertainty propagation factors (measurement uncertainty multiplier: MUM) were used to describe the whole design space by polynomial regression. The resulting 5-dimensional response surface was investigated to evaluate the design parameter's influence and to find the minimal uncertainty propagation. It could be shown, that the nMRR is of highest importance, followed by DPP and DPR. Interestingly, the NoDP is less relevant. However, the interactions of the four parameters need to be carefully considered during design optimization. Using at least five data points which cover over 40% of the upper part of the binding hyperbola (DPP > 0.57) the MUM will be minimized (MUM approximately 1.5) when the nMRR is appropriate. It is possible to reduce the measurement uncertainty propagation more than one order of magnitude.

Affinity capillary electrophoresis for studying interactions in life sciences.

Affinity capillary electrophoresis (ACE) analyzes noncovalent interactions between ligands and analytes based on changes in their electrophoretic mobility. This technique has been widely used to investigate various biomolecules, mainly proteins, polysaccharides and hormones. ACE is becoming a technique of choice to validate high throughput screening results, since it is very predictively working in realistic and relevant media, e.g. in body fluids. It is highly recommended to incorporate ACE as a powerful analytical tool to properly prepare animal testing and preclinical studies. The interacting molecules can be found free in solution or can be immobilized to a solid support. Thus, ACE is classified in two modes, free solution ACE and immobilized ACE. Every ACE mode has advantages and disadvantages. Each can be used for a variety of applications. This review covers literature of scopus and SciFinder data base in the period from 2016 until beginning 2018, including the keywords "affinity capillary electrophoresis", "immunoaffinity capillary electrophoresis", "immunoassay capillary electrophoresis" and "immunosorbent capillary electrophoresis". More than 200 articles have been found and 112 have been selected and thoroughly discussed. During this period, the data processing and the underlying calculations in mobility shift ACE (ms ACE), frontal analysis ACE (FA ACE) and plug-plug kinetic capillary electrophoresis (ppKCE) as mostly applied free solution techniques have substantially improved. The range of applications in diverse free solution and immobilized ACE techniques has been considerably broadened.

The effect of CO2 loading on alkanolamine absorbents in aqueous solutions.

Post-combustion carbon capture by amine scrubbing is the most frequently used process to remove CO2 from pulverized coal-fired power plants and also biogas flue gas streams. The quest for novel absorbents for CO2 capture with improved properties requires insight into the properties of the CO2-loaded mixed solutions. A comparative molecular dynamics study of the product state solutions, with chemically-bound CO2 of standard monoethanolamine (MEA) and the new alternative 4-diethylamino-2-butanol (DEAB) at various CO2-loadings yields solvent properties in good agreement with experimental data. The concentration of all post-reaction species in solution was based on experimental equilibria distributions. The data generated provide detailed insight into the properties of reactive mixed alkanolamine solutions. The liquid structure of aqueous MEA solutions undergoes only minor changes when absorbing CO2. The diffusion coefficients of all molecular species, however, decrease significantly with increasing CO2-loadings. The large hydrophobic clusters formed in the reactant state by DEAB molecules in water prior to CO2 binding significantly decrease in size and structure upon CO2 absorption. The diffusion coefficients of all components decrease with increasing CO2-loading, whereas the pre-reaction alkanolamine DEAB shows an increase in diffusion coefficient. This structural and kinetic information supports the molecular design and further development of novel compounds and provides data for a global process simulation and optimization.

Toward a Molecular Reorganization Energy-Based Analysis of Third-Order Nonlinear Optical Properties of Polymethine Dyes and J-Aggregates.

This work demonstrates the feasibility and applicability of the theory of extended multiphonon electron transitions for the description of nonlinear optical properties of polymethine dyes using quantum chemistry and model calculations. The transformation of a strong one-photon absorption band in dye monomers to a weak two-photon absorption band is rationalized from the electron-nuclear resonance condition. The power law fitting of the results of quantum chemical computations of nonlinear optical properties allows the predicting of the shift of the corresponding Egorov-like resonance curve to the shortest dye in the vinylogous series of dye monomers. The results presented provide an insight and guide for the rational molecular design and application of polymethine dyes.

Structure and Dynamics of Mono- vs. Doubly Lipidated Rab5 in Membranes.

The Rab5 small GTPase is a regulator of endosomal trafficking and vesicle fusion. It possesses two adjacent cysteine residues for post-translational geranylgeranylation at its C-terminus for the protein to associate with the early endosome membrane. We compare the effect of mono-lipidification of only one cysteine residue with the doubly modified, fully functional Rab protein in both guanosine diphosphate (GDP)- and guanosine triphosphate (GTP)-bound states and in different membranes (one, three, and six-component membranes). Molecular simulations show that the mono-geranylgeranylated protein is less strongly associated with the membranes and diffuses faster than the doubly lipidated protein. The geranylgeranyl anchor membrane insertion depth is smaller and the protein-membrane distance distribution is broad and uncharacteristic for the membrane composition. The mono-geranylgeranylated protein reveals an unspecific association with the membrane and an orientation at the membrane that does not allow a nucleotide-specific recruitment of further effector proteins. This work shows that double-lipidification is critical for Rab5 to perform its physiological function and mono-geranylgeranylation renders it membrane-associated but non-functional.