Spatially distributed delay line interferometer based on transmission Bragg scattering.

A novel approach for a delay line interferometer (DLI) based on transmission Bragg scattering is proposed. We have numerically and experimentally demonstrated for the first time, to the best of our knowledge, that a Bragg grating (BG) can deliver the functionality of a DLI in its transmission mode along a single common interfering optical path, instead of the conventional DLI implementation with two interfering optical paths. As a proof of concept, phase-modulated fiber BGs have been designed and fabricated, showing the desired functionality in the transmission mode of the BG. The proposed approach is applicable to any kind of BG technology, such as volume BGs, dielectric mirrors, silicon photonics, and other optical waveguide-based Bragg structures.

Compact assembly-free vector bend sensor based on all-in-fiber-core Mach-Zehnder interferometer.

A novel low-cost, compact, assembly-free and sensitive optical fiber curvature sensor is presented. This device consists of an off-axis positive refractive index modified zone (PRIMZ), induced by a direct femtosecond laser, written in a single-mode fiber (SMF) core. The PRIMZ transforms the original SMF section into a few-mode fiber (FMF). As a result, the whole fiber forms an assembly-free "SMF-FMF-SMF" sandwich Mach-Zehnder interferometer. When the device is bent, a direction-dependent spectral shift of the interference pattern is produced. The sensitivity of the sensor is up to 2.53 and 2.24 nm/m-1 for the 0° and 180° orientations in a wide bend range (from 0 to 4 m-1). In addition, the device is immune to the surrounding refractive index and has a low-temperature crosstalk, which makes it very attractive for practical structural monitoring applications.

Ultra-compact all-in-fiber-core Mach-Zehnder interferometer.

Optical Mach-Zehnder interferometers (MZIs) are useful components in a variety of optical applications, including optical modulation; signal processing; and physical, chemical, and biological sensing. We introduce here a novel, assembly-free all-in-fiber-core MZI, which is directly written with a femtosecond laser. By introducing a positive refractive index-modified zone in half of the fiber core, the original single-mode fiber section is converted into a few-mode fiber section, where a strong coupling between the two lowest-order guided modes is generated, resulting in a well-defined interference spectrum in transmission. This device promises many significant advantages over existing approaches such as ease of fabrication, stability, small insertion loss, robustness extremely broad operating bandwidth, and precise and controllable cavity lengths. These advantages make this device strikingly attractive with the potential for extensive adoption in fiber communications, signal processing, sensors, and laser wavelength control.

Ultra-sensitive refractive index sensor based on an extremely simple femtosecond-laser-induced structure.

We demonstrate here an extremely simple, compact, and robust refractive index (RI) probe sensor based on a femtosecond-laser induced refractive index-modified dot (RIMD) fabricated near the end face of a single-mode fiber. The RIMD and the fiber end face form a Fabry-Perot interferometer, which is highly sensitive to surrounding RI. The fabrication process of the RIMD involves only one step and takes ∼0.1 s, which is extremely short, compared with other techniques. The proposed sensor exhibits an ultra-high sensitivity of ∼2523.2 dB/RIU at an RI of 1.435, which is one to two orders of magnitude higher than that of the existing intensity-modulated RI sensors. Moreover, the proposed sensor has the distinct advantages of compact size (∼50 µm), easy fabrication, and no temperature cross-sensitivity. The advantages of the device make it a promising candidate for applications in designing highly sensitive sensors in a biochemical and environmental measurement field.

High-sensitivity and large-dynamic-range refractive index sensors employing weak composite Fabry-Perot cavities.

Most sensors face a common trade-off between high sensitivity and a large dynamic range. We demonstrate here an all-fiber refractometer based on a dual-cavity Fabry-Perot interferometer (FPI) that possesses the advantage of both high sensitivity and a large dynamic range. Since the two composite cavities have a large cavity length difference, one can observe both fine and coarse fringes, which correspond to the long cavity and the short cavity, respectively. The short-cavity FPI and the use of an intensity demodulation method mean that the individual fine fringe dips correspond to a series of quasi-continuous highly sensitive zones for refractive index measurement. By calculating the parameters of the composite FPI, we find that the range of the ultra-sensitive zones can be considerably adjusted to suit the end requirements. The experimental trends are in good agreement with the theoretical predictions. The co-existence of high sensitivity and a large dynamic range in a composite FPI is of great significance to practical RI measurements.

In-vitro external fixation pin-site model proof of concept: A novel approach to studying wound healing in transcutaneous implants.

External fixation is an essential surgical technique for treating trauma, limb lengthening and deformity correction, however infection is common, with infection rates ranging from 4.5 to 100% of cases. Throughout the literature researchers and clinicians have highlighted a relationship between excessive movement of the pin and skin and an increase in the patient's risk of infection, however, currently no studies have addressed this role of pin-movement on pin-site wounds. This preliminary study describes a novel in vitro pin-site model, developed using a full-thickness human skin equivalent (HSE) model in conjunction with a bespoke mechanical system which simulates pin-movement. The effect of pin-movement on the wound healing response of the skin equivalents was assessed by measuring the expression of pro-inflammatory cytokines. Six human skin equivalent models were divided into three test groups: no pin as the control, static pin-site wound and dynamic pin-site wound (n = 3). On day 3 concentrations of IL-1α and IL-8 showed a significant increase compared to the control when a static fixation pin was implanted into the skin equivalent (p < 0.05) and (p < 0.005) respectively. Levels of IL-1α and IL-8 increased further in the dynamic sample compared to the static sample (p < 0.05) and (p < 0.0005). This study demonstrates for the first time the application of HSE model to study external-fixation pin-movement in vitro. The results of this study demonstrated pin-movement has a negative effect on soft-tissue wound-healing, supporting the anecdotal evidence reported in the literature, however further analysis of wound heading would be required to verify this hypothesis.

Experimental demonstration of an optical differentiator based on a fiber Bragg grating in transmission.

We report the first experimental demonstration of single transmissive fiber Bragg grating implementation of a first-order optical differentiation. The device has been designed and fabricated, and the experimental results show a good performance over an operational bandwidth of ~2 nm.

Proposal and design of phase-modulated fiber gratings in transmission for pulse shaping.

An approach to pulse shaping using a phase-modulated fiber Bragg grating (FBG) in transmission is proposed and designed. We show that phase-modulated FBGs can provide transmission responses suitable for pulse shaping applications, offering important technological feasibility benefits, since the coupling strength remains basically uniform in the grating. Moreover, this approach retains the substantial advantages of FBGs in transmission, such as optimum energy efficiency, no requirement for an optical circulator, and robustness against fabrication errors.

Proposal and design of Airy-based rocket pulses for invariant propagation in lossy dispersive media.

A novel (to our knowledge) kind of Airy-based pulse with an invariant propagation in lossy dispersive media is proposed. The basic principle is based on an optical energy trade-off between different parts of the pulse caused by the chromatic dispersion, which is used to compensate the attenuation losses of the propagation medium. Although the ideal concept of the proposed pulses implies infinite pulse energy, the numerical simulations show that practical finite energy pulses can be designed to obtain a partially invariant propagation over a finite distance of propagation.

Optically controlled tunable dispersion compensators based on pumped fiber gratings.

We demonstrate optically tunable dispersion compensators based on pumping fiber Bragg gratings made in Er/Yb codoped fiber. The tunable dispersion for a chirped grating and also a uniform-period grating was successfully demonstrated in the experiment. The dispersion of the chirped grating was tuned from 900 to 1990 ps/nm and also from -600 to -950 ps/nm in the experiment.

Optical fibre-based detection of DNA hybridization.

A dual-peak LPFG (long-period fibre grating), inscribed in an optical fibre, has been employed to sense DNA hybridization in real time, over a 1 h period. One strand of the DNA was immobilized on the fibre, while the other was free in solution. After hybridization, the fibre was stripped and repeated detection of hybridization was achieved, so demonstrating reusability of the device. Neither strand of DNA was fluorescently or otherwise labelled. The present paper will provide an overview of our early-stage experimental data and methodology, examine the potential of fibre gratings for use as biosensors to monitor both nucleic acid and other biomolecular interactions and then give a summary of the theory and fabrication of fibre gratings from a biological standpoint. Finally, the potential of improving signal strength and possible future directions of fibre grating biosensors will be addressed.

Apodisation of photo-induced waveguide gratings using double-exposure with complementary duty cycles.

We present a novel apodisation scheme for photo-induced waveguide gratings. The apodisation is implemented with double exposures that have reversely varying duty cycles. We have successfully applied the proposed scheme to remove the sidelobes of long period gratings (LPGs). We also observed for the first time super strong sidelobes in LPGs when creating them with only a single varying-duty-cycle exposure. The strong sidelobes can be well explained with a Mach-Zehnder interference model.

Novel complex gratings with third-order group-delay variations for tunable pure dispersion slope compensation.

We present a novel tunable dispersion compensator that can provide pure slope compensation. The approach uses two specially designed complex fiber Bragg gratings (FBGs) with reversely varied third-order group delay curves to generate the dispersion slope. The slope can be changed by adjusting the relative wavelength positions of the two FBGs. Several design examples of such complex gratings are presented and discussed. Experimentally, we achieve a dispersion slope tuning range of +/- 650 ps/nm(2) with > 0.9 nm usable bandwidth.

A refractometer based on a micro-slot in a fiber Bragg grating formed by chemically assisted femtosecond laser processing.

A liquid core waveguide as a refractometer is proposed. Microtunnels were created in standard optical fiber using tightly focused femtoscond laser inscription and chemical etching. A 1.2(h)x125(d) x500(l) mum micro-slot engraved along a fiber Bragg grating (FBG) was used to construct liquid core waveguide by filling the slot with index matching oils. The device was used to measure refractive index and sensitivity up to 10- 6/pm was obtained.

Developments in contact lens measurement: A comparative study of industry standard geometric inspection and optical coherence tomography.

PURPOSE: The aim of this study was to compare a developmental optical coherence tomography (OCT) based contact lens inspection instrument to a widely used geometric inspection instrument (Optimec JCF), to establish the capability of a market focused OCT system. METHODS: Measurements of 27 soft spherical contact lenses were made using the Optimec JCF and a new OCT based instrument, the Optimec is830. Twelve of the lenses analysed were specially commissioned from a traditional hydrogel (Contamac GM Advance 49%) and 12 from a silicone hydrogel (Contamac Definitive 65), each set with a range of back optic zone radius (BOZR) and centre thickness (CT) values. Three commercial lenses were also measured; CooperVision MyDay (Stenfilcon A) in -10D, -3D and +6D powers. Two measurements of BOZR, CT and total diameter were made for each lens in temperature controlled saline on both instruments. RESULTS: The results showed that the is830 and JCF measurements were comparable, but that the is830 had a better repeatability coefficient for BOZR (0.065mm compared to 0.151mm) and CT (0.008mm compared to 0.027mm). Both instruments had similar results for total diameter (0.041mm compared to 0.044mm). CONCLUSIONS: The OCT based instrument assessed in this study is able to match and improve on the JCF instrument for the measurement of total diameter, back optic zone radius and centre thickness for soft contact lenses in temperature controlled saline.

Processing and rendering of Fourier domain optical coherence tomography images at a line rate over 524 kHz using a graphics processing unit.

In Fourier domain optical coherence tomography (FD-OCT), a large amount of interference data needs to be resampled from the wavelength domain to the wavenumber domain prior to Fourier transformation. We present an approach to optimize this data processing, using a graphics processing unit (GPU) and parallel processing algorithms. We demonstrate an increased processing and rendering rate over that previously reported by using GPU paged memory to render data in the GPU rather than copying back to the CPU. This avoids unnecessary and slow data transfer, enabling a processing and display rate of well over 524,000 A-scan∕s for a single frame. To the best of our knowledge this is the fastest processing demonstrated to date and the first time that FD-OCT processing and rendering has been demonstrated entirely on a GPU.

Femtosecond laser micro-inscription of optical coherence tomography resolution test artifacts.

Optical coherence tomography (OCT) systems are becoming more commonly used in biomedical imaging and, to enable continued uptake, a reliable method of characterizing their performance and validating their operation is required. This paper outlines the use of femtosecond laser subsurface micro-inscription techniques to fabricate an OCT test artifact for validating the resolution performance of a commercial OCT system. The key advantage of this approach is that by utilizing the nonlinear absorption a three dimensional grid of highly localized point and line defects can be written in clear fused silica substrates.

In-fiber polymer-glass hybrid waveguide Bragg grating.

A 1.2 microm (height) x 125 microm (depth) x 500 microm (length) microslot along a fiber Bragg grating was engraved across the optical fiber by femtosecond laser patterning and chemical etching. By filling epoxy in the slot and subsequent UV curing, a hybrid waveguide grating structure with a polymer core and glass cladding was fabricated. The obtained device is highly thermally responsive with linear coefficient of 211 pm/ degrees C.

Virtual Gires-Tournois etalons realized with phase-modulated wideband chirped fiber gratings.

We propose and demonstrate novel virtual Gires-Tournois (GT) etalons based on fiber gratings. By introducing an additional phase modulation in wideband linearly chirped fiber Bragg gratings, we have successfully generated GT resonance with only one grating. This technique can simplify the fabrication procedure while retaining the normal advantages of distributed etalons, including their full compatibility with optical fiber, low insertion loss, and low cost. Such etalons can be used as dispersion compensation devices in optical transmission systems.

Real-time detection of DNA interactions with long-period fiber-grating-based biosensor.

Using an optical biosensor based on a dual-peak long-period fiber grating, we have demonstrated the detection of interactions between biomolecules in real time. Silanization of the grating surface was successfully realized for the covalent immobilization of probe DNA, which was subsequently hybridized with the complementary target DNA sequence. It is interesting to note that the DNA biosensor was reusable after being stripped off the hybridized target DNA from the grating surface, demonstrating a function of multiple usability.