Ultrasound‒induced facile synthesis of spinel CoFe2O4‒PAC magnetic nanocatalyst for remediation of hypersaline petrochemical wastewater: Degradation mechanism, biodegradability enhancement and phytotoxicity mitigation.

In this study, magnetic CoFe2O4-PAC nanocatalysts were synthesized through facile hydrothermal and co‒precipitation approaches with ultrasonic irradiation, which were used for the treatment of hypersaline petrochemical wastewater (HPCW). When an ultrasound‒induced synthesis process (US@CoFe2O4‒PAC) was used, a more efficient and stable magnetic spinel CoFe2O4‒PAC nanocatalyst was developed. The application of this nanocatalyst as a PMS activator, not only caused eradication of 90.4% of chemical oxygen demand (COD) of a HPCW after 90 min reaction time under the optimum conditions (pH 5-6, catalyst dose 1.0 g/L and 1.0 mM PMS), but also led to marginal leaching of iron (314 µg/L) and cobalt (95 µg/L) from the nanocatalyst. Recycling experiments over five consecutive runs showed a negligible decrease (7.2%) in COD removal efficiency which proved the stability and reusability of magnetic US@CoFe2O4-PAC. Two main mechanisms of adsorption and catalytic oxidation processes (homogeneous and heterogeneous PMS) are involved simultaneously in the PMS/US@CoFe2O4-PAC system, which are responsible for the destruction of refractory contaminants of HPCW through the generation of SO4•‒ and OH• radicals. COD of HPCW was mainly removed through SO4•- radical attack (73.6%) and the biodegradability of HPCW was enhanced dramatically after 90 min reaction time. The germination index (GI) of raw HPCW was increased 17.1 ± 4.2% and 24.3 ± 8.8% after 15 and 90 min reaction time, respectively, even PMS/US@CoFe2O4-PAC system showed less impact on phytotoxicity mitigation. Hence, it can be recommended to dilute the effluent before using for irrigational purpose. The findings of this study present practical significance of spinel US@CoFe2O4-PAC, which is an environment‒friendly catalyst, easy to handle and can sustain long‒term operation for the treatment of recalcitrant hypersaline wastewater and the other potential practical applications.

Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) in water and edible fish species of Karun River, Ahvaz, Iran: spatial distribution, human health, and ecological risk assessment.

Per- and polyfluoroalkyl substances (PFASs) such as perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) are environmental contaminants with unfavorable impacts on human health and nature. This study aimed to determine the PFOA and PFOS concentration in water and fish samples from Karun, the largest river in Iran. According to the results, the PFOA and PFOS in water samples were 5.81-69.26 ng/L and not detected (n.d.)-35.12 ng/L, respectively. The dry season displayed higher concentrations in water samples than in the wet season. The maximum PFOS concentration measured was related to Barbus barbules sp. (27.89 ng/g). The human health risk assessment indicated minor risks (hazard ratio, HR < 1) from PFOA and PFOS through consuming contaminated drinking water and fish. Only HR value of PFOS in downstream area exceeded slightly 1.0, indicating potential health risk due to consumption of the river fish. Considering the average PFASs concentration, the risk quotients (RQs) showed low ecological risk.

Risk of Pesticides Mixtures in Rice to Birds and Humans in Iran.

Rice is a staple in the diet of nearly half of the world's population. As with most crops, pesticides are used as a tool to increase crop yield in rice farming. This study investigated the residues of 14 organophosphate insecticides and 2 herbicides in rice cultivated at five locations in the southwest of Iran. The pesticide residues were then used to estimate the risk that they may pose to the health of bird and human consumers. The rice samples from the five locations contained residues from 10 to 13 pesticides. Of the 16 pesticides measured, the mean concentration of 12 pesticides exceeded the maximum residue limit set by the Iranian National Standards Organization at two or more of the sampling sites. The greatest total exceedance (sum of all pesticides detected in rice) of the species sensitivity distributions constructed for birds was 0.74% and the level of concern set for the assessment was an exceedance ≥ 5%, which suggests a relatively low risk to birds. For human consumers, no single pesticide measured in rice samples posed a considerable risk. However, when considering the mixture of pesticides present in rice samples, the cumulative risk exceeded the level of concern in all samples from all sites. The margin of safety for the mixture of pesticides present in rice samples ranged from 5.8 to 29.1, with 1 being the level of concern. The results of this study indicate that efforts need to be made to mitigate the exposure of human consumers to pesticides present in rice cultivated in Iran. This study also highlights the need to collect data on pesticides residues in other crop cultivated in Iran.

Distribution of total petroleum hydrocarbons in superficial sediments of Karun River Basin, southwest of Iran: spatial and seasonal variations, source identification, and ecological risk.

Total petroleum hydrocarbons (TPHs) are common environmental pollutants in aquatic ecosystems that tend to adsorb onto the sediments. This study aimed to monitor the concentration and assessment of contamination level of TPHs in the sediments of Karun River and Bahmanshir estuary, which will eventually flow into the Persian Gulf. GIS-mapping technique was used to indicate the distribution of TPHs. The samples were collected during dry and wet seasons at 15 monitoring stations. - The maximum amount of TPHs was obtained at station No. 14 in the dry season (225.29 µg/g). The indices of determining the pollution source showed that hydrocarbons in polluted areas were mainly of biogenic origin. Compared to sediment quality guidelines (SQGs) and contamination factor (Cf), the study area sediments were in the conditions of moderate pollution and had a low ecological risk.

Spatiotemporal variations of 2,4-dichlorophenoxy acetic acid with the role of sugarcane industry and related human health risk assessments in the Shadegan International Wetland.

2,4-Dichlorophenoxyacetic acid (2,4-D) is the most important pesticide widely used in Khuzestan province. This study aimed to determine the ecological risks assessment in fish, plant tissues, and trends in 2,4-D urinary biomarker concentration in humans of Shadegan International wetland, Iran. Sampling was carried out from three areas: freshwater, saltwater, and brackish water. The average concentration of 2,4-D at point 38, taken from the wetland's northern parts, was 15.73 µg/L. In the lower regions, it reached 326 µg/L at point 25. From points 37 to 16, it was higher than the international standard. The increasing trend of 2,4-D concentration was observed from point 36 to the middle of the wetland. The non-carcinogenic risk through ingestion and skin contact for children and adults was 3E-3 and 1.5E-2, 2.1E-3, and 8.6E-5, respectively, and through fish, consumption was 7.1E-4 for both groups. HI values were below one (< 1), indicating no health risk. HQ values in the summer were more than one (> 1), indicating the high risk to aquatic organisms and human health.

Optimization of the biological salt removal process from artificial industrial wastewater with high TDS by Spirulina microalga using the response surface method.

This study aimed to examine the direct applicability of Spirulina maxima as a new conceptual method for removing total dissolved solids (TDS) from artificial industrial wastewater (AIW). In this study, live microalgal cells were used in a photobioreactor for TDS removal. The effects of TDS levels, pH, light intensity, and light retention time on microalgal growth and TDS removal were investigated, and optimal conditions were determined using the response surface method and Box-Behnken Design (RSM-BBD). The calculated values of coefficient of determination (R2), adjusted R2, and predicted R2 were 0.9754, 0.9508, and 0.636, respectively, which are close to the R2 values and validated the proposed statistical model. A second-order model could optimally determine the interactions between the studied variables according to the one-way analysis of variance (ANOVA). The results showed that increasing TDS levels reduced microalgal growth and TDS removal efficiency in AIW. S. maxima reduced TDS by 76% and 47% at TDS concentrations of 2,000-4,000 mg/L, respectively, when used in AIW. Maximum biomass efficiency (1.8 g/L) was obtained at a TDS concentration of 2,000 mg/L with other parameters optimized.

A salt resistant biosurfactant produced by moderately halotolerant Pseudomonas aeruginosa (AHV-KH10) and its application for bioremediation of diesel-contaminated sediment in saline environment.

A halotolerant bacterial strain was isolated from oily-contaminated sites of Persian Gulf, which characterized as Pseudomonas aeruginosa (AHV-KH10) by 16S rRNA gene sequencing. This strain was used for bioremediation of diesel-contaminated sediments. Biosurfactant production was initially screened by using oil displacement test and drop-collapse method, followed by measurement of surface tension (ST) of growth medium. Produced biosurfactant was a rhamnolipid type biosurfactant and lowered the ST to 33.4 mN/m at the given critical micelle concentration (CMC) of 75 mg/L. Addition of 3 CMC rhamnolipid, inoculums size of 15 mL, biodegradation in slurry phase and salinity level of 6% led totally to a diesel biodegradation rate of 70% for initial concentration of 1000 mg/kg after 35 days. The maximum diesel removal occurred at the salinity content of 6% indicating the moderately halo-tolerant characteristics of isolated strain. Evaluation of bacterial growth showed a biomass yield of 0.33 mg VSS/mg diesel in selected conditions. The field performance of Pseudomonas aeruginosa AHV-KH10 was proved through the removal of the TPH content in unwashed sediment, which varied from 2390 to 1875 mg/kg within four months.

Occurrence and distribution of microplastic particles and the concentration of Di 2-ethyl hexyl phthalate (DEHP) in microplastics and wastewater in the wastewater treatment plant.

Wastewater treatment plant (WWTP) is one of the significant sources of Microplastics (MPs) release to the environment. Di 2-ethyl hexyl phthalate (DEHP) is used as an additive for more flexibility of plastics. In this study, we determined the number, size, shape, and color distribution of MPs as well as the concentration of DEHP in MPs and wastewater during the wastewater treatment process in WWTP. Samples were collected from 4 stations of different treatment stages of WWTP. The microplastic particles and the concentration of DEHP were detected via the fluorescence and polarized light microscopy and GC/MS instrument, respectively. The number of MPs decreased from 9.2 (station 1) to 0.84 MP/L (the final treated effluent) during the wastewater treatment process. Also, the size of MPs at the last station was smaller than the other stations. The mean concentrations of DEHP in MPs in stations 1, 2, 3 and 4 had the respective values of 83.3, 61.05, 30.62 and 17.49 µg/g, while the mean concentrations of DEHP in wastewater in stations 1, 2, 3 and 4 were 30.08, 25.07, 9.56, and 8.13 µg/L, respectively. This study shows that despite the removal of high amounts of MPs and DEHP in the final effluent of WWTP, due to the high volume of this effluent (2.828 × 108 L/d), significant amount of MPs (2.419 × 107 MP/day) and DEHP enter the aquatic environment daily, which may threaten the health of the fish and aquatic organisms and ultimately on the health of the local population.

Concentrations and health effects of short- and long-term exposure to PM2.5, NO2, and O3 in ambient air of Ahvaz city, Iran (2014-2017).

The primary objective of the present study was to evaluate the concentrations and short and long-term excess mortality attributed to PM2.5, NO2, and O3 observed in ambient air of Ahvaz during March 2014 to March 2017 period using the AirQ + software developed by the World Health Organization (WHO), which is updated in 2016 by WHO European Centre for Environment and Health. The hourly concentrations of PM2.5, O3, and NO2 measured at different regulatory monitoring network stations in Ahvaz city were obtained from the Department of Environment (DOE) of the city. Then, for various air quality monitoring stations, the 24-h average concentration of PM2.5, 1-h average of NO2 concentration, and maximum daily 8-h O3 concentrations were calculated using Excel 2010 software. When the maximum daily 8-h ozone means exceeding the value of 35, it was subtracted from 35 to calculate SOMO35 indicator for modeling. Validation of air quality data was performed according to the Aphekom and WHO's methodologies for health impact assessment of air pollution. Year-specific city population and baseline incidence of the health outcomes were obtained. The three-year averages of PM2.5, NO2, and O3 concentrations were 68.95 (±39.86) µg/m3, 135.90 (±47.82) µg/m3, and 38.63 (±12.83) parts-per-billion-volume (ppbv), respectively. SOMO35 values of ozone were 6596.66, 3411.78, and 470.88 ppbv in 2014-2015, 2015-2016, and 2016-2017 years, respectively. The AP and number of natural deaths due to NO2 were higher than PM2.5 except the last year (2016-2017), causing about 39.18%, 40.73%, and 14.39% of deaths within the first, the second, and the third year, respectively. However, for the last year, the natural mortality for PM2.5 was higher than NO2 (34.46% versus 14.39%). The total number of natural mortality caused by PM2.5 and NO2 in all years was 4061 and 4391, respectively. A significant number of deaths was estimated to be attributed to the given air pollutants. It can be concluded that by designing and implementing air pollution control strategies and actions, both health effects and economic losses will be prevented.

Modeling and optimization of nonylphenol removal from contaminated water media using a magnetic recoverable composite by artificial neural networks.

Herein, activated carbon impregnated iron oxide nanoparticles (Fe3O4/AC) were synthesized to determine their potentials for the adsorption of nonylphenol (NP) in aqueous solution with different experimental variables, namely the pH of the solution, contact time, adsorbent dosage and the initial NP concentration. Additionally, an artificial neural network system was used to find the relative importance of each of the aforementioned input variables on NP adsorption efficiency. Experimental findings indicated that the optimum solution pH for NP adsorption was 3.0. The equilibrium time of the adsorption process was 30 min. According to the results of isotherm and kinetic studies, among all applied models, the Liu and pseudo-first-order models showed the best fit with the experimental data. The pH of the solution, compared to other input variables, had the maximum impacts on NP adsorption efficiency. Under optimum conditions, the adsorption percentage decreased insignificantly from 99.6 to 92.6% after the fifth cycle. Also, the adsorption efficiencies of 70.7, 73.5 and 67.3% were observed for river water, tap water and wastewater effluent, respectively. Ultimately, from the findings of this study, it can be postulated that Fe3O4/AC nanoparticles can be recommended as a promising and novel adsorbent to remove NP from polluted groundwater.

Enhanced coagulation-photocatalytic treatment of Acid red 73 dye and real textile wastewater using UVA/synthesized MgO nanoparticles.

Sequencing coagulation - photocatalytic degradation using UVA/MgO nanoparticles process was investigated for Acid red 73dye removal and then treatment of a real textile wastewater. Effective operational parameters including pH and coagulant and photocatalyst dosage were studied in synthetic wastewater and then the process was applied for real wastewater. Both coagulation and photocatalytic processes were pH dependent. At coagulant dosage of 200 mg/L and initial pH of 6, the dye concentration decreased from 200 to 31 mg/L. Complete removal of AR73 was observed with MgO nanoparticles of 0.8 g/L, initial pH of 5 and reaction time of 60 min. Langmuir-Hinshelwood model was well fitted with removal results (R(2): 0.939-0.988 for different initial dye concentration). In the case of real textile wastewater, the sequence coagulation-UVA/MgO nanoparticles photocatalytic degradation yielded considerable total COD and TOC removal 98.3% and 86.9%respectively, after 300 min.

Removal of tetracycline antibiotic from contaminated water media by multi-walled carbon nanotubes: operational variables, kinetics, and equilibrium studies.

Multi-walled carbon nanotubes (MWCNTs) were purified and oxidized by a 4 mol L(-1) mixture of H2SO4:H2O2 and then were used as adsorbent for tetracycline (TC) adsorption from aqueous solutions. The purified MWCNTs were characterized using Fourier transform infrared spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and N2 adsorption/desorption isotherms. The adsorption of TC onto the MWCNT was investigated as a function of the initial pH of the solution, adsorbent dosage, and background electrolyte cations and anions. The results of the one-way analysis of variance (ANOVA) showed that Fe(3+) ion significantly affected and decreased TC adsorption onto the MWCNT (P-value < 0.05), while other studied cations and anions did not affect TC adsorption (P-value>0.05). Nonlinear pseudo-first-order, pseudo-second-order, general order, and Avrami fractionary-order kinetic models were used to investigate the kinetics of TC adsorption. The fractionary-order kinetic model provided the best fit to experimental data. In addition, the adsorption isotherms data were well described by nonlinear equation of the Liu isotherm model with the maximum adsorption capacity of 253.38 mg g(-1). The results of this study indicate that the oxidized MWCNTs can be used as an effective adsorbent for TC removal from aqueous solutions.

Preparation, characterization, and application of activated carbon from low-cost material for the adsorption of tetracycline antibiotic from aqueous solutions.

In this study, a new zinc chloride (ZnCl2) impregnated activated carbon (Zn-AC) was prepared from oak charcoals as low-cost material and used as adsorbent for tetracycline (TC) adsorption. The Zn-AC was characterized using field emission-scanning electron microscope, powder X-ray diffraction, and CHNS-O analyses. Specific surface area of the adsorbent was also measured using the Brunauer, Emmett and Teller (BET) isotherm model. The TC adsorption onto the Zn-AC was investigated as a function of solution pH, adsorbent dosage, and inorganic cations (Li+, K+, Mg2+, Ca2+, Ni2+, and Fe3+) and anions (HCO3-, NO3- and SO42-) that could interfere in the adsorption of TC. The adsorbate solution pH had no considerable effect on TC adsorption. The adsorption of TC onto the adsorbent was relatively fast and reached the equilibrium after about 120 min. The results showed that all studied cations and anions decreased TC adsorption onto the Zn-AC, but this decrease in TC adsorption was strongly significant for Fe3+ and Ni2+ ions. The general order kinetic model and the Redlich-Peterson isotherm model provided the best fit to the experimental data. The maximum amount of TC adsorbed onto the Zn-AC (Qmax) is 282.06 mg g-1, indicating this adsorbent is a good adsorbent for the removal of TC from aqueous solutions.

Waste electrical and electronic equipment (WEEE) estimation: A case study of Ahvaz City, Iran.

UNLABELLED: The development of new technologies and the increasing consumption of electronic and electrical equipment have led to increased generation of e-waste in the municipal waste streams. This waste due to the presence of hazardous substances in its composition needs specific attention and management. The present study was carried out in Ahvaz metropolis using a survey method in 2011. For estimating the amount of waste electrical and electronic equipment (WEEE) generated, the "use and consumption" method was used. In order to determine the amounts of the electrical and electronic equipment that were used and their lifetime, and for investigating the current status of e-waste management in Ahvaz, an appropriate questionnaire was devised. In 2011, the total number of discarded electronic items was 2,157,742 units. According to the average weight of the equipment, the total generation of e-waste was 9952.25 metric tons per year and was 9.95 kg per capita per year. The highest e-waste generated was related to air conditioners, with 3125.36 metric tons per year, followed by the wastes from refrigerators and freezers, washing machines, and televisions. The wastes from desktop computers and laptops were 418 and 63 metric tons/year, respectively, and the corresponding values per capita were 0.42 and 0.063 kg, respectively. These results also showed that 10 tons fixed phones, 25 tons mobile phones, and by considering an average lifetime of 3 years for each lamp about 320 tons lamps were generated as e-waste in Ahvaz in the year 2011. Based on this study, currently there is not an integrated system for proper management of WEEE in Ahvaz, and this waste stream is collected and disposed of with other municipal waste. Some measures, including a specific collection system, recycling of valuable substances, and proper treatment and disposal, should be done about such waste. IMPLICATIONS: Ahvaz is one of the most important economic centers of Iran, and to the best of our knowledge, no study has been carried out to estimate the generation of waste electrical and electronic equipment (WEEE) in this city. Therefore, the authors estimated the generation of the WEEE by the "use and consumption" method. The results of this study can be useful not only for decision-making organizations of Ahvaz to manage and recycle this type of waste but also can be used as a method to estimate the generation of e-waste in different locations of the world, especially in places where the generation of such waste could be a risk to human health and the environment.

Consumption of foods contaminated with heavy metals and their association with cardiovascular disease (CVD) using GAM software (cohort study).

Introduction: Heavy metals can enter the environment and food through industrial activities, acid rain, chemical fertilizers, pesticides, and sewage. A large amount of these metals is dangerous because they tend to bio accumulate. A concern with these metals is the long-term, low-dose exposure seen in the general population. HMs can cause disorders in the cardiovascular system through various mechanisms such as the production of free radicals, DNA damage, lipid peroxidation, and oxidative stress. Material and method: Food items measured in the present study included rice, bread, and vegetables. 210 participants (105 controls and 105 patients) were randomly selected for this study. The demographic information of the subjects was obtained from the Hoveyzeh Cohort Center. The relationship between heavy metals in food and cardiovascular diseases is investigated by The Generalized Additive Model (GAM). Result: The results of the present study showed that when urine Cd was smoothed based on rice Cd, there was a significant correlation between urine Cd and Cd consumed in vegetables and rice. The GAM coefficient for urinary Cd excreted in case-control groups and Cd consumed in vegetables were 479.79(SE: 6.49-73.87) and 818.56(SE: 11.96-68.43), respectively, and for rice consumed, it was 0.03(SE: 0.015-2.103) and 0.04(SE: 0.017-2.338), respectively. The GAM coefficient for As consumption in vegetables and As in urine of case and control groups was 1.61 (SE: 9.48-0.16) and 22.36 (SE: 13.60-1.64), respectively. The same coefficient for rice consumption in case and control groups was 4.5 (SE: 0.62-7.22) and 10.48 (SE: 1.46-7.16), respectively. There was a very strong and significant correlation between the Sr in the urine of both groups and the Sr in the food consumed, so that the urinary Sr in the control group is excreted more than in the cardiovascular group. Conclusion: GAM analysis indicates that As in vegetable and rice is more than the standard limitation value. Also, Sr and Cd in vegetables, rice, and bread were more than the standard limitation value. According to the GAM model As had a significant value in rice and vegetables indicating that As is more than the standard limitation value, therefore, it is associated with CVD.

Contaminant occurrence, distribution and ecological risk assessment of phthalate esters in the Persian Gulf.

Due to the increasing population of the world, the presence of harmful compounds, especially phthalate esters (PAEs), are one of the important problems of environmental pollution. These compounds are known as carcinogenic compounds and Endocrine-disrupting chemicals (EDCs) for humans. In this study, the occurrence of PAEs and the evaluation of its ecological risks were carried out in the Persian Gulf. Water samples were collected from two industrial sites, a rural site and an urban site. Samples were analyzed using magnetic solid phase extraction (MSPE) and gas chromatography-mass spectrometry (GC/MS) technique to measure seven PAEs including Di(2-ethylhexyl) phthalate (DEHP), butyl benzyl phthalate (BBP), diethyl phthalate (DEP), dibutyl phthalate (DBP), Dimethyl phthalate (DMP), di-n-octyl phthalate (DNOP), and Di-iso-butyl phthalate (DIBP). The BBP was not detected in any of the samples. The total concentration of six PAEs (Σ6PAEs) ranged from 7.23 to 23.7 µg/L, with a mean concentration of 13.7µg/L. The potential ecological risk of each target PAEs was evaluated by using the risk quotient (RQ) method in seawater samples, and the relative results declined in the sequence of DEHP >DIBP > DBP > DEP > DMP in examined water samples. DEHP had a high risk to algae, crustaceans and fish at all sites. While DMP and DEP showed lower risk for all mentioned trophic levels. The results of this study will be helpful for the implementation of effective control measures and remedial strategies for PAEs pollution in the Persian Gulf.

Association between heavy metals and metabolic syndrome in drinking water and surface soil: case-control study in Iran.

Although obesity is a major risk factor for metabolic syndrome (MetS), not all obese people develop MetS that is directly related to obesity. This suggests that the risk of MetS is influenced by other genetic or environmental agents such as heavy metals. The aim of this study was to investigate the relationship between heavy metals in drinking water and surface soil, and its relationship with the incidence of MetS. To determine the sampling points of drinking water and surface soil, from the location of 150 people selected for inclusion in the study, 16 points were selected randomly for heavy metal concentration analysis. Results were indicated that mean concentrations of V, Mn, Ni, As, Cd, and Sr in drinking water of MetS group were higher than control group. The concentration of heavy metals in drinking water, except for Mn and Sr, did not show a significant difference between case and control groups. The results of this study showed that concentration of heavy metals in drinking water and surface soil was positively associated with the incidence of MetS.

Association of the efficiency of hemodialysis instruments in the removal of microbial and chemical pollutant.

Dialysis water is vital because of various harmful contaminants for patients. The aim of this study was to assess the efficiency of hemodialysis instruments in the removal of microbial and chemical pollutant in educational hospitals affiliated to Ahvaz Jundishapur University of medical sciences, Iran during 2018-2019. This cross-sectional descriptive research studied the microbial and chemical water quality of hemodialysis instruments in Razi, Sina, and Golestan hospitals in Ahwaz, Iran. 72 samples of microbial parameters and 24 samples of chemical parameters were collected from water used in hemodialysis instruments, including microbial characteristics (the total coliform, fecal coliform and heterotrophic bacteria counts) and chemical characteristics (pH, turbidity, PO4, Cl, Mg, So4, Ca, NO2, and EC) at Razi, Imam, and Golestan educational hospitals on all weekdays during 2018-2019. In this study, experiments were done according to the current standard methods, EPA from hemodialysis instruments. Finally, using SPSS18 software and descriptive statistics, the relationship between results at the removal of toxic, microbial, and chemical pollutants in different months and hospitals was investigated. this study showed that the average concentration of chemical characteristics during the warm season at Razi, Imam, and Golestan educational hospitals for pH, Turbidity, PO4, Cl, Mg, So4, Ca, NO2, and EC were (6.867, 6.4475, 6.53); (2.985, 3.035, 1.226); (0.075, 0.245, 0.195); (38.5, 21.965, 144.87); (1.552, 1.657, 39.445); (8.6, 4.5, 21.5), (2.09, 3.187, 78.975); (0.0082, 0.038, 0.155), and (125.25, 70.35, 78.35), respectively during 2018. Also, during 2019, results showed that the average levels of amounts for pH, Turbidity, PO4, Cl, Mg, So4, Ca, NO2, and EC in Razi, Imam, and Golestan educational hospitals were (7.077, 7.252, 6.435), (1.725, 0.595, 4.16), (0.0775, 0.0597, 0.0297), (52.33, 138.81, 20.92), (23.52, 18.227, 8.767), (35, 27.25, 4.05), (14.58, 28.152, 9.25), (0.0067, 0.0045, 0.0032), and (210.52, 121.62, 29.16), respectively. According to the results, hemodialysis instruments in Razi and Imam have a 90% efficiency in removing heterotrophic bacteria counts (HPC). Based on these findings, educational hospital hemodialysis equipment effluent in Ahvaz, Iran was mitted to Iran environmental standards for use in hemodialysis machines. The result showed that the removal percentage level of microbial and chemical pollutants by the hemodialysis process is comparatively suitable. It should be mentioned that in the proper operation and reconstruction, hemodialysis systems can have an increased rate of removal of microbial and chemical pollutants.

Efficiency studies of modified IFAS-OSA system upgraded by an anoxic sludge holding tank.

An upgraded integrated fixed-film activated sludge-oxic settling anoxic (IFAS-OSA) system is a new technology for reducing nutrients and excess sludge. The results showed that the average TN removal efficiency of the IFAS-OSA system was gradually increased up to 7.5%, while the PO4-3-P removal efficiency increased up-to 27%, compared with that of the IFAS system. The COD removal efficiency of the IFAS-OSA system was slightly increased up-to 5.4% and TSS removal efficiency increased up to 10.5% compared with the control system. Biomass yield coefficient (Yobs) in the IFAS and IFAS-OSA systems were 0.44 and 0.24 (gr MLSS/ gr COD). Hence, sludge production decreased by 45%. The average SVI was decreased by 48% in IFAS-OSA system compared with IFAS. This study demonstrated the better performance of the IFAS-OSA system compared to that of the IFAS system.

Relationship between urinary heavy metals with metabolic syndrome and its components in population from Hoveyzeh cohort study: A case-control study in Iran.

BACKGROUND: The incidence of Metabolic Syndrome (MetS) has been growing rapidly and is rising to pandemic proportions. Although obesity is a primary risk factor for the enhancement of these conditions, not all obese individuals develop metabolic syndrome, indicating that the risk for developing MetS is impacted by other genetic and/or environmental factors such as heavy metals. Therefore, the present study focused on the association between exposures to heavy metal and MetS. METHODS: Urine samples were collected from 150 participants (75 patients with MetS and 75 healthy participants), which were used from Hoveyzeh Cohort center. To make a quantitative comparison between the two groups, Man-Whitney nonparametric test was used. The logistic regression was performed adjusted for age, demographic, lifestyle factor, physical activity, occupational history and urine creatinine. RESULTS: The results of logistic regression showed that OR and 95 % CI for Cd, Pb, Sr, As and Fe concentration were still significant after adjusting for urine creatinine. Moreover, there was a relationship between Cd and Pb levels and waist circumstance (WC). After adjusting for urine creatinine, age, sex, occupation, smoking status, education and place of residence, only Pb concentration was showed a significant association with systolic blood pressure (SBP). The subjects with high urine level of Cd had the high odds (OR: 6.273; 95 % Cl: 1.783-22.070) of MetS and low high-density lipoprotein (HDL-C). The relationship between As concentration and high fasting blood sugars confirmed the previous evidence suggesting that high As level can cause diabetes. CONCLUSION: These results indicated that outbreak of MetS and its component are associated with heavy metal concentrations in urine.